Imported Upstream version 0.7.git30891fc

1 files changed, 0 insertions, 294 deletions

diff --git a/install-sh b/install-sh
deleted file mode 100755
index 6ce63b9..0000000
--- a/install-sh
+++ /dev/null
@@ -1,294 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-#
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
-	shift
-
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
-
-	pathcomp=$pathcomp/
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
-
-# Make a couple of temp file names in the proper directory.
-
-	dsttmp=$dstdir/_inst.$$_
-	rmtmp=$dstdir/_rm.$$_
-
-# Trap to clean up temp files at exit.
-
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
-	else
-		:
-	fi
-} &&
-
-# Now rename the file to the real destination.
-
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-
-{
-	(exit 0); exit
-}