summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore2
-rw-r--r--build-disable-elfhack.patch16
-rw-r--r--ffvpx.patch9502
-rw-r--r--firefox-mochitest.patch9
-rw-r--r--firefox-testing.patch52
-rw-r--r--firefox.spec32
-rw-r--r--mozilla-1516803.patch17
-rw-r--r--mozilla-1663844.patch40
-rw-r--r--mozilla-1667096.patch44
-rw-r--r--mozilla-1670333.patch71
-rw-r--r--pgo.patch95
-rwxr-xr-xprint_results14
-rwxr-xr-xprint_subtest4
-rwxr-xr-xrun-tests6
-rw-r--r--sources4
15 files changed, 9674 insertions, 234 deletions
diff --git a/.gitignore b/.gitignore
index 0b5520a..cba71f3 100644
--- a/.gitignore
+++ b/.gitignore
@@ -436,3 +436,5 @@ firefox-3.6.4.source.tar.bz2
/firefox-testing.tar.gz
/site-packages.tar.gz
/mochitest-python.tar.gz
+/firefox-84.0.source.tar.xz
+/firefox-langpacks-84.0-20201210.tar.xz
diff --git a/build-disable-elfhack.patch b/build-disable-elfhack.patch
index a80c551..faaf669 100644
--- a/build-disable-elfhack.patch
+++ b/build-disable-elfhack.patch
@@ -1,12 +1,12 @@
-diff -up firefox-65.0/toolkit/moz.configure.disable-elfhack firefox-65.0/toolkit/moz.configure
---- firefox-65.0/toolkit/moz.configure.disable-elfhack 2019-01-28 14:16:48.530345132 +0100
-+++ firefox-65.0/toolkit/moz.configure 2019-01-28 14:18:03.231029682 +0100
-@@ -1036,7 +1036,7 @@ with only_when('--enable-compile-environ
- help='{Enable|Disable} elf hacks')
+diff -up firefox-84.0/toolkit/moz.configure.disable-elfhack firefox-84.0/toolkit/moz.configure
+--- firefox-84.0/toolkit/moz.configure.disable-elfhack 2020-12-10 12:37:30.727243266 +0100
++++ firefox-84.0/toolkit/moz.configure 2020-12-10 12:39:42.771967894 +0100
+@@ -1280,7 +1280,7 @@ with only_when("--enable-compile-environ
+ help="{Enable|Disable} elf hacks",
+ )
- set_config('USE_ELF_HACK',
-- depends_if('--enable-elf-hack')(lambda _: True))
-+ depends_if('--enable-elf-hack')(lambda _: False))
+- set_config("USE_ELF_HACK", depends_if("--enable-elf-hack")(lambda _: True))
++ set_config("USE_ELF_HACK", depends_if("--enable-elf-hack")(lambda _: False))
@depends(check_build_environment)
diff --git a/ffvpx.patch b/ffvpx.patch
new file mode 100644
index 0000000..cff0437
--- /dev/null
+++ b/ffvpx.patch
@@ -0,0 +1,9502 @@
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/ffmpeg58/moz.build.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/ffmpeg58/moz.build
+--- firefox-84.0/dom/media/platforms/ffmpeg/ffmpeg58/moz.build.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/ffmpeg58/moz.build 2020-12-10 17:03:31.731266180 +0100
+@@ -27,8 +27,6 @@ if CONFIG['CC_TYPE'] == 'gcc':
+ ]
+ if CONFIG['MOZ_WAYLAND']:
+ CXXFLAGS += CONFIG['TK_CFLAGS']
+- CXXFLAGS += CONFIG['MOZ_WAYLAND_CFLAGS']
+ DEFINES['MOZ_WAYLAND_USE_VAAPI'] = 1
+- include('/ipc/chromium/chromium-config.mozbuild')
+
+ FINAL_LIBRARY = 'xul'
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.cpp.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.cpp
+--- firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.cpp.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.cpp 2020-12-10 17:03:31.731266180 +0100
+@@ -11,6 +11,10 @@
+ #include "mozilla/Types.h"
+ #include "PlatformDecoderModule.h"
+ #include "prlink.h"
++#ifdef MOZ_WAYLAND
++# include "mozilla/widget/DMABufLibWrapper.h"
++# include "mozilla/StaticPrefs_media.h"
++#endif
+
+ #define AV_LOG_DEBUG 48
+ #define AV_LOG_INFO 32
+@@ -254,6 +258,46 @@ void FFmpegLibWrapper::Unlink() {
+ }
+
+ #ifdef MOZ_WAYLAND
++void FFmpegLibWrapper::LinkVAAPILibs() {
++ if (widget::GetDMABufDevice()->IsDMABufVAAPIEnabled()) {
++ PRLibSpec lspec;
++ lspec.type = PR_LibSpec_Pathname;
++ const char* libDrm = "libva-drm.so.2";
++ lspec.value.pathname = libDrm;
++ mVALibDrm = PR_LoadLibraryWithFlags(lspec, PR_LD_NOW | PR_LD_LOCAL);
++ if (!mVALibDrm) {
++ FFMPEG_LOG("VA-API support: Missing or old %s library.\n", libDrm);
++ }
++
++ if (!StaticPrefs::media_ffmpeg_vaapi_drm_display_enabled()) {
++ const char* libWayland = "libva-wayland.so.2";
++ lspec.value.pathname = libWayland;
++ mVALibWayland = PR_LoadLibraryWithFlags(lspec, PR_LD_NOW | PR_LD_LOCAL);
++ if (!mVALibWayland) {
++ FFMPEG_LOG("VA-API support: Missing or old %s library.\n", libWayland);
++ }
++ }
++
++ if (mVALibWayland || mVALibDrm) {
++ const char* lib = "libva.so.2";
++ lspec.value.pathname = lib;
++ mVALib = PR_LoadLibraryWithFlags(lspec, PR_LD_NOW | PR_LD_LOCAL);
++ // Don't use libva when it's missing vaExportSurfaceHandle.
++ if (mVALib && !PR_FindSymbol(mVALib, "vaExportSurfaceHandle")) {
++ PR_UnloadLibrary(mVALib);
++ mVALib = nullptr;
++ }
++ if (!mVALib) {
++ FFMPEG_LOG("VA-API support: Missing or old %s library.\n", lib);
++ }
++ }
++ } else {
++ FFMPEG_LOG("VA-API FFmpeg is disabled by platform");
++ }
++}
++#endif
++
++#ifdef MOZ_WAYLAND
+ bool FFmpegLibWrapper::IsVAAPIAvailable() {
+ # define VA_FUNC_LOADED(func) (func != nullptr)
+ return VA_FUNC_LOADED(avcodec_get_hw_config) &&
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.h.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.h
+--- firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.h.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/FFmpegLibWrapper.h 2020-12-10 17:03:31.731266180 +0100
+@@ -56,6 +56,7 @@ struct MOZ_ONLY_USED_TO_AVOID_STATIC_CON
+ #ifdef MOZ_WAYLAND
+ // Check if mVALib are available and we can use HW decode.
+ bool IsVAAPIAvailable();
++ void LinkVAAPILibs();
+ #endif
+
+ // indicate the version of libavcodec linked to.
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp
+--- firefox-84.0/dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp 2020-12-10 17:03:31.731266180 +0100
+@@ -9,10 +9,6 @@
+ #include "mozilla/ArrayUtils.h"
+ #include "FFmpegLog.h"
+ #include "prlink.h"
+-#ifdef MOZ_WAYLAND
+-# include "mozilla/widget/DMABufLibWrapper.h"
+-# include "mozilla/StaticPrefs_media.h"
+-#endif
+
+ namespace mozilla {
+
+@@ -58,43 +54,7 @@ bool FFmpegRuntimeLinker::Init() {
+ }
+
+ #ifdef MOZ_WAYLAND
+- if (widget::GetDMABufDevice()->IsDMABufVAAPIEnabled()) {
+- PRLibSpec lspec;
+- lspec.type = PR_LibSpec_Pathname;
+- const char* libDrm = "libva-drm.so.2";
+- lspec.value.pathname = libDrm;
+- sLibAV.mVALibDrm = PR_LoadLibraryWithFlags(lspec, PR_LD_NOW | PR_LD_LOCAL);
+- if (!sLibAV.mVALibDrm) {
+- FFMPEG_LOG("VA-API support: Missing or old %s library.\n", libDrm);
+- }
+-
+- if (!StaticPrefs::media_ffmpeg_vaapi_drm_display_enabled()) {
+- const char* libWayland = "libva-wayland.so.2";
+- lspec.value.pathname = libWayland;
+- sLibAV.mVALibWayland =
+- PR_LoadLibraryWithFlags(lspec, PR_LD_NOW | PR_LD_LOCAL);
+- if (!sLibAV.mVALibWayland) {
+- FFMPEG_LOG("VA-API support: Missing or old %s library.\n", libWayland);
+- }
+- }
+-
+- if (sLibAV.mVALibWayland || sLibAV.mVALibDrm) {
+- const char* lib = "libva.so.2";
+- lspec.value.pathname = lib;
+- sLibAV.mVALib = PR_LoadLibraryWithFlags(lspec, PR_LD_NOW | PR_LD_LOCAL);
+- // Don't use libva when it's missing vaExportSurfaceHandle.
+- if (sLibAV.mVALib &&
+- !PR_FindSymbol(sLibAV.mVALib, "vaExportSurfaceHandle")) {
+- PR_UnloadLibrary(sLibAV.mVALib);
+- sLibAV.mVALib = nullptr;
+- }
+- if (!sLibAV.mVALib) {
+- FFMPEG_LOG("VA-API support: Missing or old %s library.\n", lib);
+- }
+- }
+- } else {
+- FFMPEG_LOG("VA-API FFmpeg is disabled by platform");
+- }
++ sLibAV.LinkVAAPILibs();
+ #endif
+
+ // While going through all possible libs, this status will be updated with a
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.cpp.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.cpp
+--- firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.cpp.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.cpp 2020-12-10 17:03:31.731266180 +0100
+@@ -124,8 +124,8 @@ static AVPixelFormat ChooseVAAPIPixelFor
+ return AV_PIX_FMT_NONE;
+ }
+
+-DMABufSurfaceWrapper::DMABufSurfaceWrapper(DMABufSurface* aSurface,
+- FFmpegLibWrapper* aLib)
++DMABufSurfaceWrapper<LIBAV_VER>::DMABufSurfaceWrapper(DMABufSurface* aSurface,
++ FFmpegLibWrapper* aLib)
+ : mSurface(aSurface),
+ mLib(aLib),
+ mAVHWFramesContext(nullptr),
+@@ -138,8 +138,8 @@ DMABufSurfaceWrapper::DMABufSurfaceWrapp
+ mSurface->GetUID());
+ }
+
+-void DMABufSurfaceWrapper::LockVAAPIData(AVCodecContext* aAVCodecContext,
+- AVFrame* aAVFrame) {
++void DMABufSurfaceWrapper<LIBAV_VER>::LockVAAPIData(
++ AVCodecContext* aAVCodecContext, AVFrame* aAVFrame) {
+ FFMPEG_LOG("DMABufSurfaceWrapper: VAAPI locking dmabuf surface UID = %d",
+ mSurface->GetUID());
+ if (aAVCodecContext && aAVFrame) {
+@@ -148,7 +148,7 @@ void DMABufSurfaceWrapper::LockVAAPIData
+ }
+ }
+
+-void DMABufSurfaceWrapper::ReleaseVAAPIData() {
++void DMABufSurfaceWrapper<LIBAV_VER>::ReleaseVAAPIData() {
+ FFMPEG_LOG("DMABufSurfaceWrapper: VAAPI releasing dmabuf surface UID = %d",
+ mSurface->GetUID());
+ if (mHWAVBuffer && mAVHWFramesContext) {
+@@ -158,7 +158,7 @@ void DMABufSurfaceWrapper::ReleaseVAAPID
+ mSurface->ReleaseSurface();
+ }
+
+-DMABufSurfaceWrapper::~DMABufSurfaceWrapper() {
++DMABufSurfaceWrapper<LIBAV_VER>::~DMABufSurfaceWrapper() {
+ FFMPEG_LOG("DMABufSurfaceWrapper: deleting dmabuf surface UID = %d",
+ mSurface->GetUID());
+ ReleaseVAAPIData();
+@@ -181,7 +181,14 @@ AVCodec* FFmpegVideoDecoder<LIBAV_VER>::
+ return nullptr;
+ }
+
+-class VAAPIDisplayHolder {
++template <int V>
++class VAAPIDisplayHolder {};
++
++template <>
++class VAAPIDisplayHolder<LIBAV_VER>;
++
++template <>
++class VAAPIDisplayHolder<LIBAV_VER> {
+ public:
+ VAAPIDisplayHolder(FFmpegLibWrapper* aLib, VADisplay aDisplay)
+ : mLib(aLib), mDisplay(aDisplay){};
+@@ -193,7 +200,8 @@ class VAAPIDisplayHolder {
+ };
+
+ static void VAAPIDisplayReleaseCallback(struct AVHWDeviceContext* hwctx) {
+- auto displayHolder = static_cast<VAAPIDisplayHolder*>(hwctx->user_opaque);
++ auto displayHolder =
++ static_cast<VAAPIDisplayHolder<LIBAV_VER>*>(hwctx->user_opaque);
+ delete displayHolder;
+ }
+
+@@ -229,7 +237,7 @@ bool FFmpegVideoDecoder<LIBAV_VER>::Crea
+ }
+ }
+
+- hwctx->user_opaque = new VAAPIDisplayHolder(mLib, mDisplay);
++ hwctx->user_opaque = new VAAPIDisplayHolder<LIBAV_VER>(mLib, mDisplay);
+ hwctx->free = VAAPIDisplayReleaseCallback;
+
+ int major, minor;
+@@ -703,7 +711,7 @@ void FFmpegVideoDecoder<LIBAV_VER>::Rele
+ }
+ }
+
+-DMABufSurfaceWrapper*
++DMABufSurfaceWrapper<LIBAV_VER>*
+ FFmpegVideoDecoder<LIBAV_VER>::GetUnusedDMABufSurfaceWrapper() {
+ int len = mDMABufSurfaces.Length();
+ for (int i = 0; i < len; i++) {
+@@ -769,7 +777,8 @@ MediaResult FFmpegVideoDecoder<LIBAV_VER
+
+ RefPtr<DMABufSurfaceYUV> surface;
+
+- DMABufSurfaceWrapper* surfaceWrapper = GetUnusedDMABufSurfaceWrapper();
++ DMABufSurfaceWrapper<LIBAV_VER>* surfaceWrapper =
++ GetUnusedDMABufSurfaceWrapper();
+ if (!surfaceWrapper) {
+ if (mVAAPIDeviceContext) {
+ surface = DMABufSurfaceYUV::CreateYUVSurface(vaDesc);
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.h.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.h
+--- firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.h.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/FFmpegVideoDecoder.h 2020-12-10 17:03:31.731266180 +0100
+@@ -55,7 +55,14 @@ namespace mozilla {
+ // We own the DMABufSurface underlying GPU data and we use it for
+ // repeated rendering of video frames.
+ //
+-class DMABufSurfaceWrapper final {
++template <int V>
++class DMABufSurfaceWrapper {};
++
++template <>
++class DMABufSurfaceWrapper<LIBAV_VER>;
++
++template <>
++class DMABufSurfaceWrapper<LIBAV_VER> final {
+ public:
+ DMABufSurfaceWrapper(DMABufSurface* aSurface, FFmpegLibWrapper* aLib);
+ ~DMABufSurfaceWrapper();
+@@ -162,7 +169,7 @@ class FFmpegVideoDecoder<LIBAV_VER>
+ MediaDataDecoder::DecodedData& aResults);
+
+ void ReleaseUnusedVAAPIFrames();
+- DMABufSurfaceWrapper* GetUnusedDMABufSurfaceWrapper();
++ DMABufSurfaceWrapper<LIBAV_VER>* GetUnusedDMABufSurfaceWrapper();
+ void ReleaseDMABufSurfaces();
+ #endif
+
+@@ -180,7 +187,7 @@ class FFmpegVideoDecoder<LIBAV_VER>
+ const bool mDisableHardwareDecoding;
+ VADisplay mDisplay;
+ bool mUseDMABufSurfaces;
+- nsTArray<DMABufSurfaceWrapper> mDMABufSurfaces;
++ nsTArray<DMABufSurfaceWrapper<LIBAV_VER>> mDMABufSurfaces;
+ #endif
+ RefPtr<KnowsCompositor> mImageAllocator;
+ RefPtr<ImageContainer> mImageContainer;
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/FFVPXRuntimeLinker.cpp.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/FFVPXRuntimeLinker.cpp
+--- firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/FFVPXRuntimeLinker.cpp.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/FFVPXRuntimeLinker.cpp 2020-12-10 17:03:31.731266180 +0100
+@@ -64,6 +64,10 @@ bool FFVPXRuntimeLinker::Init() {
+ MOZ_ASSERT(NS_IsMainThread());
+ sLinkStatus = LinkStatus_FAILED;
+
++#ifdef MOZ_WAYLAND
++ sFFVPXLib.LinkVAAPILibs();
++#endif
++
+ // We retrieve the path of the lgpllibs library as this is where mozavcodec
+ // and mozavutil libs are located.
+ PathString lgpllibsname = GetLibraryName(nullptr, "lgpllibs");
+diff -up firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/moz.build.ffvpx firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/moz.build
+--- firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/moz.build.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/ffmpeg/ffvpx/moz.build 2020-12-10 17:03:31.731266180 +0100
+@@ -36,4 +36,8 @@ if CONFIG["CC_TYPE"] == "gcc":
+ DEFINES["FFVPX_VERSION"] = 46465650
+ DEFINES["USING_MOZFFVPX"] = True
+
++if CONFIG["MOZ_WAYLAND"]:
++ CXXFLAGS += CONFIG["TK_CFLAGS"]
++ DEFINES["MOZ_WAYLAND_USE_VAAPI"] = 1
++
+ FINAL_LIBRARY = "xul"
+diff -up firefox-84.0/gfx/layers/DMABUFSurfaceImage.cpp.ffvpx firefox-84.0/gfx/layers/DMABUFSurfaceImage.cpp
+--- firefox-84.0/gfx/layers/DMABUFSurfaceImage.cpp.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/gfx/layers/DMABUFSurfaceImage.cpp 2020-12-10 17:03:31.731266180 +0100
+@@ -9,6 +9,7 @@
+ #include "mozilla/layers/CompositableClient.h"
+ #include "mozilla/layers/CompositableForwarder.h"
+ #include "mozilla/layers/DMABUFTextureClientOGL.h"
++#include "mozilla/layers/TextureForwarder.h"
+ #include "mozilla/UniquePtr.h"
+
+ using namespace mozilla;
+diff -up firefox-84.0/media/ffvpx/changes.patch.ffvpx firefox-84.0/media/ffvpx/changes.patch
+--- firefox-84.0/media/ffvpx/changes.patch.ffvpx 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/media/ffvpx/changes.patch 2020-12-10 17:03:31.731266180 +0100
+@@ -50,3 +50,27 @@ index 9fb8d0a..97ad3b9 100644
+ rgba_color[0] = rgba >> 24;
+ rgba_color[1] = rgba >> 16;
+ rgba_color[2] = rgba >> 8;
++diff --git a/media/ffvpx/libavutil/hwcontext_vaapi.c b/media/ffvpx/libavutil/hwcontext_vaapi.c
++--- a/media/ffvpx/libavutil/hwcontext_vaapi.c
+++++ b/media/ffvpx/libavutil/hwcontext_vaapi.c
++@@ -39,17 +39,19 @@
++ # include <unistd.h>
++ #endif
++
++
++ #include "avassert.h"
++ #include "buffer.h"
++ #include "common.h"
++ #include "hwcontext.h"
+++#if CONFIG_LIBDRM
++ #include "hwcontext_drm.h"
+++#endif
++ #include "hwcontext_internal.h"
++ #include "hwcontext_vaapi.h"
++ #include "mem.h"
++ #include "pixdesc.h"
++ #include "pixfmt.h"
++
++
++ typedef struct VAAPIDevicePriv {
++
+diff -up firefox-84.0/media/ffvpx/config_common.h.ffvpx firefox-84.0/media/ffvpx/config_common.h
+--- firefox-84.0/media/ffvpx/config_common.h.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/config_common.h 2020-12-10 17:03:31.731266180 +0100
+@@ -18,4 +18,13 @@
+ #define CONFIG_RDFT 1
+ #endif
+
++#ifdef MOZ_WAYLAND
++#undef CONFIG_VAAPI
++#undef CONFIG_VP8_VAAPI_HWACCEL
++#undef CONFIG_VP9_VAAPI_HWACCEL
++#define CONFIG_VAAPI 1
++#define CONFIG_VP8_VAAPI_HWACCEL 1
++#define CONFIG_VP9_VAAPI_HWACCEL 1
++#endif
++
+ #endif
+diff -up firefox-84.0/media/ffvpx/FILES.ffvpx firefox-84.0/media/ffvpx/FILES
+--- firefox-84.0/media/ffvpx/FILES.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/FILES 2020-12-10 17:03:31.731266180 +0100
+@@ -131,6 +131,11 @@
+ ./libavcodec/thread.h
+ ./libavcodec/unary.h
+ ./libavcodec/utils.c
++./libavcodec/vaapi.h
++./libavcodec/vaapi_decode.h
++./libavcodec/vaapi_decode.c
++./libavcodec/vaapi_vp8.c
++./libavcodec/vaapi_vp9.c
+ ./libavcodec/version.h
+ ./libavcodec/videodsp.c
+ ./libavcodec/videodsp.h
+@@ -264,6 +269,8 @@
+ ./libavutil/hwcontext.c
+ ./libavutil/hwcontext.h
+ ./libavutil/hwcontext_internal.h
++./libavutil/hwcontext_vaapi.h
++./libavutil/hwcontext_vaapi.c
+ ./libavutil/imgutils.c
+ ./libavutil/imgutils.h
+ ./libavutil/imgutils_internal.h
+diff -up firefox-84.0/media/ffvpx/libavcodec/avcodec.symbols.ffvpx firefox-84.0/media/ffvpx/libavcodec/avcodec.symbols
+--- firefox-84.0/media/ffvpx/libavcodec/avcodec.symbols.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/avcodec.symbols 2020-12-10 17:03:31.731266180 +0100
+@@ -28,6 +28,11 @@ av_get_pcm_codec
+ av_get_profile_name
+ av_grow_packet
+ av_hwaccel_next
++av_hwdevice_ctx_init
++av_hwdevice_ctx_alloc
++av_hwdevice_ctx_create_derived
++av_hwframe_transfer_get_formats
++av_hwframe_ctx_alloc
+ av_init_packet
+ av_lockmgr_register
+ av_new_packet
+@@ -93,6 +98,7 @@ avcodec_free_context
+ avcodec_get_class
+ avcodec_get_context_defaults3
+ avcodec_get_frame_class
++avcodec_get_hw_config
+ avcodec_get_name
+ avcodec_get_subtitle_rect_class
+ avcodec_get_type
+diff -up firefox-84.0/media/ffvpx/libavcodec/moz.build.ffvpx firefox-84.0/media/ffvpx/libavcodec/moz.build
+--- firefox-84.0/media/ffvpx/libavcodec/moz.build.ffvpx 2020-12-10 17:03:31.725266007 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/moz.build 2020-12-10 17:03:31.732266209 +0100
+@@ -96,6 +96,13 @@ if not CONFIG['MOZ_FFVPX_AUDIOONLY']:
+ 'vp9prob.c',
+ 'vp9recon.c'
+ ]
++ if CONFIG['MOZ_WAYLAND']:
++ SOURCES += [
++ 'vaapi_decode.c',
++ 'vaapi_vp8.c',
++ 'vaapi_vp9.c',
++ ]
++ USE_LIBS += ['mozva']
+
+ if CONFIG['MOZ_FDK_AAC']:
+ SOURCES += [
+diff -up firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.c.ffvpx firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.c
+--- firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.c.ffvpx 2020-12-10 17:03:31.732266209 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.c 2020-12-10 17:03:31.732266209 +0100
+@@ -0,0 +1,732 @@
++/*
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#include "libavutil/avassert.h"
++#include "libavutil/common.h"
++#include "libavutil/pixdesc.h"
++
++#include "avcodec.h"
++#include "decode.h"
++#include "internal.h"
++#include "vaapi_decode.h"
++
++
++int ff_vaapi_decode_make_param_buffer(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic,
++ int type,
++ const void *data,
++ size_t size)
++{
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ VAStatus vas;
++ VABufferID buffer;
++
++ av_assert0(pic->nb_param_buffers + 1 <= MAX_PARAM_BUFFERS);
++
++ vas = vaCreateBuffer(ctx->hwctx->display, ctx->va_context,
++ type, size, 1, (void*)data, &buffer);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to create parameter "
++ "buffer (type %d): %d (%s).\n",
++ type, vas, vaErrorStr(vas));
++ return AVERROR(EIO);
++ }
++
++ pic->param_buffers[pic->nb_param_buffers++] = buffer;
++
++ av_log(avctx, AV_LOG_DEBUG, "Param buffer (type %d, %zu bytes) "
++ "is %#x.\n", type, size, buffer);
++ return 0;
++}
++
++
++int ff_vaapi_decode_make_slice_buffer(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic,
++ const void *params_data,
++ size_t params_size,
++ const void *slice_data,
++ size_t slice_size)
++{
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ VAStatus vas;
++ int index;
++
++ av_assert0(pic->nb_slices <= pic->slices_allocated);
++ if (pic->nb_slices == pic->slices_allocated) {
++ if (pic->slices_allocated > 0)
++ pic->slices_allocated *= 2;
++ else
++ pic->slices_allocated = 64;
++
++ pic->slice_buffers =
++ av_realloc_array(pic->slice_buffers,
++ pic->slices_allocated,
++ 2 * sizeof(*pic->slice_buffers));
++ if (!pic->slice_buffers)
++ return AVERROR(ENOMEM);
++ }
++ av_assert0(pic->nb_slices + 1 <= pic->slices_allocated);
++
++ index = 2 * pic->nb_slices;
++
++ vas = vaCreateBuffer(ctx->hwctx->display, ctx->va_context,
++ VASliceParameterBufferType,
++ params_size, 1, (void*)params_data,
++ &pic->slice_buffers[index]);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to create slice "
++ "parameter buffer: %d (%s).\n", vas, vaErrorStr(vas));
++ return AVERROR(EIO);
++ }
++
++ av_log(avctx, AV_LOG_DEBUG, "Slice %d param buffer (%zu bytes) "
++ "is %#x.\n", pic->nb_slices, params_size,
++ pic->slice_buffers[index]);
++
++ vas = vaCreateBuffer(ctx->hwctx->display, ctx->va_context,
++ VASliceDataBufferType,
++ slice_size, 1, (void*)slice_data,
++ &pic->slice_buffers[index + 1]);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to create slice "
++ "data buffer (size %zu): %d (%s).\n",
++ slice_size, vas, vaErrorStr(vas));
++ vaDestroyBuffer(ctx->hwctx->display,
++ pic->slice_buffers[index]);
++ return AVERROR(EIO);
++ }
++
++ av_log(avctx, AV_LOG_DEBUG, "Slice %d data buffer (%zu bytes) "
++ "is %#x.\n", pic->nb_slices, slice_size,
++ pic->slice_buffers[index + 1]);
++
++ ++pic->nb_slices;
++ return 0;
++}
++
++static void ff_vaapi_decode_destroy_buffers(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic)
++{
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ VAStatus vas;
++ int i;
++
++ for (i = 0; i < pic->nb_param_buffers; i++) {
++ vas = vaDestroyBuffer(ctx->hwctx->display,
++ pic->param_buffers[i]);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to destroy "
++ "parameter buffer %#x: %d (%s).\n",
++ pic->param_buffers[i], vas, vaErrorStr(vas));
++ }
++ }
++
++ for (i = 0; i < 2 * pic->nb_slices; i++) {
++ vas = vaDestroyBuffer(ctx->hwctx->display,
++ pic->slice_buffers[i]);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to destroy slice "
++ "slice buffer %#x: %d (%s).\n",
++ pic->slice_buffers[i], vas, vaErrorStr(vas));
++ }
++ }
++}
++
++int ff_vaapi_decode_issue(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic)
++{
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ VAStatus vas;
++ int err;
++
++ av_log(avctx, AV_LOG_DEBUG, "Decode to surface %#x.\n",
++ pic->output_surface);
++
++ vas = vaBeginPicture(ctx->hwctx->display, ctx->va_context,
++ pic->output_surface);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to begin picture decode "
++ "issue: %d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail_with_picture;
++ }
++
++ vas = vaRenderPicture(ctx->hwctx->display, ctx->va_context,
++ pic->param_buffers, pic->nb_param_buffers);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to upload decode "
++ "parameters: %d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail_with_picture;
++ }
++
++ vas = vaRenderPicture(ctx->hwctx->display, ctx->va_context,
++ pic->slice_buffers, 2 * pic->nb_slices);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to upload slices: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail_with_picture;
++ }
++
++ vas = vaEndPicture(ctx->hwctx->display, ctx->va_context);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to end picture decode "
++ "issue: %d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
++ AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS)
++ goto fail;
++ else
++ goto fail_at_end;
++ }
++
++ if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
++ AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS)
++ ff_vaapi_decode_destroy_buffers(avctx, pic);
++
++ err = 0;
++ goto exit;
++
++fail_with_picture:
++ vas = vaEndPicture(ctx->hwctx->display, ctx->va_context);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to end picture decode "
++ "after error: %d (%s).\n", vas, vaErrorStr(vas));
++ }
++fail:
++ ff_vaapi_decode_destroy_buffers(avctx, pic);
++fail_at_end:
++exit:
++ pic->nb_param_buffers = 0;
++ pic->nb_slices = 0;
++ pic->slices_allocated = 0;
++ av_freep(&pic->slice_buffers);
++
++ return err;
++}
++
++int ff_vaapi_decode_cancel(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic)
++{
++ ff_vaapi_decode_destroy_buffers(avctx, pic);
++
++ pic->nb_param_buffers = 0;
++ pic->nb_slices = 0;
++ pic->slices_allocated = 0;
++ av_freep(&pic->slice_buffers);
++
++ return 0;
++}
++
++static const struct {
++ uint32_t fourcc;
++ enum AVPixelFormat pix_fmt;
++} vaapi_format_map[] = {
++#define MAP(va, av) { VA_FOURCC_ ## va, AV_PIX_FMT_ ## av }
++ // 4:0:0
++ MAP(Y800, GRAY8),
++ // 4:2:0
++ MAP(NV12, NV12),
++ MAP(YV12, YUV420P),
++ MAP(IYUV, YUV420P),
++#ifdef VA_FOURCC_I420
++ MAP(I420, YUV420P),
++#endif
++ MAP(IMC3, YUV420P),
++ // 4:1:1
++ MAP(411P, YUV411P),
++ // 4:2:2
++ MAP(422H, YUV422P),
++#ifdef VA_FOURCC_YV16
++ MAP(YV16, YUV422P),
++#endif
++ // 4:4:0
++ MAP(422V, YUV440P),
++ // 4:4:4
++ MAP(444P, YUV444P),
++ // 4:2:0 10-bit
++#ifdef VA_FOURCC_P010
++ MAP(P010, P010),
++#endif
++#ifdef VA_FOURCC_I010
++ MAP(I010, YUV420P10),
++#endif
++#undef MAP
++};
++
++static int vaapi_decode_find_best_format(AVCodecContext *avctx,
++ AVHWDeviceContext *device,
++ VAConfigID config_id,
++ AVHWFramesContext *frames)
++{
++ AVVAAPIDeviceContext *hwctx = device->hwctx;
++ VAStatus vas;
++ VASurfaceAttrib *attr;
++ enum AVPixelFormat source_format, best_format, format;
++ uint32_t best_fourcc, fourcc;
++ int i, j, nb_attr;
++
++ source_format = avctx->sw_pix_fmt;
++ av_assert0(source_format != AV_PIX_FMT_NONE);
++
++ vas = vaQuerySurfaceAttributes(hwctx->display, config_id,
++ NULL, &nb_attr);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to query surface attributes: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ return AVERROR(ENOSYS);
++ }
++
++ attr = av_malloc_array(nb_attr, sizeof(*attr));
++ if (!attr)
++ return AVERROR(ENOMEM);
++
++ vas = vaQuerySurfaceAttributes(hwctx->display, config_id,
++ attr, &nb_attr);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to query surface attributes: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ av_freep(&attr);
++ return AVERROR(ENOSYS);
++ }
++
++ best_format = AV_PIX_FMT_NONE;
++
++ for (i = 0; i < nb_attr; i++) {
++ if (attr[i].type != VASurfaceAttribPixelFormat)
++ continue;
++
++ fourcc = attr[i].value.value.i;
++ for (j = 0; j < FF_ARRAY_ELEMS(vaapi_format_map); j++) {
++ if (fourcc == vaapi_format_map[j].fourcc)
++ break;
++ }
++ if (j >= FF_ARRAY_ELEMS(vaapi_format_map)) {
++ av_log(avctx, AV_LOG_DEBUG, "Ignoring unknown format %#x.\n",
++ fourcc);
++ continue;
++ }
++ format = vaapi_format_map[j].pix_fmt;
++ av_log(avctx, AV_LOG_DEBUG, "Considering format %#x -> %s.\n",
++ fourcc, av_get_pix_fmt_name(format));
++
++ best_format = av_find_best_pix_fmt_of_2(format, best_format,
++ source_format, 0, NULL);
++ if (format == best_format)
++ best_fourcc = fourcc;
++ }
++
++ av_freep(&attr);
++
++ if (best_format == AV_PIX_FMT_NONE) {
++ av_log(avctx, AV_LOG_ERROR, "No usable formats for decoding!\n");
++ return AVERROR(EINVAL);
++ }
++
++ av_log(avctx, AV_LOG_DEBUG, "Picked %s (%#x) as best match for %s.\n",
++ av_get_pix_fmt_name(best_format), best_fourcc,
++ av_get_pix_fmt_name(source_format));
++
++ frames->sw_format = best_format;
++ if (avctx->internal->hwaccel_priv_data) {
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ AVVAAPIFramesContext *avfc = frames->hwctx;
++
++ ctx->pixel_format_attribute = (VASurfaceAttrib) {
++ .type = VASurfaceAttribPixelFormat,
++ .value.value.i = best_fourcc,
++ };
++
++ avfc->attributes = &ctx->pixel_format_attribute;
++ avfc->nb_attributes = 1;
++ }
++
++ return 0;
++}
++
++static const struct {
++ enum AVCodecID codec_id;
++ int codec_profile;
++ VAProfile va_profile;
++} vaapi_profile_map[] = {
++#define MAP(c, p, v) { AV_CODEC_ID_ ## c, FF_PROFILE_ ## p, VAProfile ## v }
++ MAP(MPEG2VIDEO, MPEG2_SIMPLE, MPEG2Simple ),
++ MAP(MPEG2VIDEO, MPEG2_MAIN, MPEG2Main ),
++ MAP(H263, UNKNOWN, H263Baseline),
++ MAP(MPEG4, MPEG4_SIMPLE, MPEG4Simple ),
++ MAP(MPEG4, MPEG4_ADVANCED_SIMPLE,
++ MPEG4AdvancedSimple),
++ MAP(MPEG4, MPEG4_MAIN, MPEG4Main ),
++ MAP(H264, H264_CONSTRAINED_BASELINE,
++ H264ConstrainedBaseline),
++ MAP(H264, H264_MAIN, H264Main ),
++ MAP(H264, H264_HIGH, H264High ),
++#if VA_CHECK_VERSION(0, 37, 0)
++ MAP(HEVC, HEVC_MAIN, HEVCMain ),
++ MAP(HEVC, HEVC_MAIN_10, HEVCMain10 ),
++#endif
++ MAP(MJPEG, MJPEG_HUFFMAN_BASELINE_DCT,
++ JPEGBaseline),
++ MAP(WMV3, VC1_SIMPLE, VC1Simple ),
++ MAP(WMV3, VC1_MAIN, VC1Main ),
++ MAP(WMV3, VC1_COMPLEX, VC1Advanced ),
++ MAP(WMV3, VC1_ADVANCED, VC1Advanced ),
++ MAP(VC1, VC1_SIMPLE, VC1Simple ),
++ MAP(VC1, VC1_MAIN, VC1Main ),
++ MAP(VC1, VC1_COMPLEX, VC1Advanced ),
++ MAP(VC1, VC1_ADVANCED, VC1Advanced ),
++ MAP(VP8, UNKNOWN, VP8Version0_3 ),
++#if VA_CHECK_VERSION(0, 38, 0)
++ MAP(VP9, VP9_0, VP9Profile0 ),
++#endif
++#if VA_CHECK_VERSION(0, 39, 0)
++ MAP(VP9, VP9_2, VP9Profile2 ),
++#endif
++#undef MAP
++};
++
++/*
++ * Set *va_config and the frames_ref fields from the current codec parameters
++ * in avctx.
++ */
++static int vaapi_decode_make_config(AVCodecContext *avctx,
++ AVBufferRef *device_ref,
++ VAConfigID *va_config,
++ AVBufferRef *frames_ref)
++{
++ AVVAAPIHWConfig *hwconfig = NULL;
++ AVHWFramesConstraints *constraints = NULL;
++ VAStatus vas;
++ int err, i, j;
++ const AVCodecDescriptor *codec_desc;
++ VAProfile *profile_list = NULL, matched_va_profile;
++ int profile_count, exact_match, matched_ff_profile;
++
++ AVHWDeviceContext *device = (AVHWDeviceContext*)device_ref->data;
++ AVVAAPIDeviceContext *hwctx = device->hwctx;
++
++ codec_desc = avcodec_descriptor_get(avctx->codec_id);
++ if (!codec_desc) {
++ err = AVERROR(EINVAL);
++ goto fail;
++ }
++
++ profile_count = vaMaxNumProfiles(hwctx->display);
++ profile_list = av_malloc_array(profile_count,
++ sizeof(VAProfile));
++ if (!profile_list) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++
++ vas = vaQueryConfigProfiles(hwctx->display,
++ profile_list, &profile_count);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to query profiles: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(ENOSYS);
++ goto fail;
++ }
++
++ matched_va_profile = VAProfileNone;
++ exact_match = 0;
++
++ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_profile_map); i++) {
++ int profile_match = 0;
++ if (avctx->codec_id != vaapi_profile_map[i].codec_id)
++ continue;
++ if (avctx->profile == vaapi_profile_map[i].codec_profile ||
++ vaapi_profile_map[i].codec_profile == FF_PROFILE_UNKNOWN)
++ profile_match = 1;
++ for (j = 0; j < profile_count; j++) {
++ if (vaapi_profile_map[i].va_profile == profile_list[j]) {
++ exact_match = profile_match;
++ break;
++ }
++ }
++ if (j < profile_count) {
++ matched_va_profile = vaapi_profile_map[i].va_profile;
++ matched_ff_profile = vaapi_profile_map[i].codec_profile;
++ if (exact_match)
++ break;
++ }
++ }
++ av_freep(&profile_list);
++
++ if (matched_va_profile == VAProfileNone) {
++ av_log(avctx, AV_LOG_ERROR, "No support for codec %s "
++ "profile %d.\n", codec_desc->name, avctx->profile);
++ err = AVERROR(ENOSYS);
++ goto fail;
++ }
++ if (!exact_match) {
++ if (avctx->hwaccel_flags &
++ AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH) {
++ av_log(avctx, AV_LOG_VERBOSE, "Codec %s profile %d not "
++ "supported for hardware decode.\n",
++ codec_desc->name, avctx->profile);
++ av_log(avctx, AV_LOG_WARNING, "Using possibly-"
++ "incompatible profile %d instead.\n",
++ matched_ff_profile);
++ } else {
++ av_log(avctx, AV_LOG_VERBOSE, "Codec %s profile %d not "
++ "supported for hardware decode.\n",
++ codec_desc->name, avctx->profile);
++ err = AVERROR(EINVAL);
++ goto fail;
++ }
++ }
++
++ vas = vaCreateConfig(hwctx->display, matched_va_profile,
++ VAEntrypointVLD, NULL, 0,
++ va_config);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to create decode "
++ "configuration: %d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++
++ hwconfig = av_hwdevice_hwconfig_alloc(device_ref);
++ if (!hwconfig) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ hwconfig->config_id = *va_config;
++
++ constraints =
++ av_hwdevice_get_hwframe_constraints(device_ref, hwconfig);
++ if (!constraints) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++
++ if (avctx->coded_width < constraints->min_width ||
++ avctx->coded_height < constraints->min_height ||
++ avctx->coded_width > constraints->max_width ||
++ avctx->coded_height > constraints->max_height) {
++ av_log(avctx, AV_LOG_ERROR, "Hardware does not support image "
++ "size %dx%d (constraints: width %d-%d height %d-%d).\n",
++ avctx->coded_width, avctx->coded_height,
++ constraints->min_width, constraints->max_width,
++ constraints->min_height, constraints->max_height);
++ err = AVERROR(EINVAL);
++ goto fail;
++ }
++ if (!constraints->valid_sw_formats ||
++ constraints->valid_sw_formats[0] == AV_PIX_FMT_NONE) {
++ av_log(avctx, AV_LOG_ERROR, "Hardware does not offer any "
++ "usable surface formats.\n");
++ err = AVERROR(EINVAL);
++ goto fail;
++ }
++
++ if (frames_ref) {
++ AVHWFramesContext *frames = (AVHWFramesContext *)frames_ref->data;
++
++ frames->format = AV_PIX_FMT_VAAPI;
++ frames->width = avctx->coded_width;
++ frames->height = avctx->coded_height;
++
++ err = vaapi_decode_find_best_format(avctx, device,
++ *va_config, frames);
++ if (err < 0)
++ goto fail;
++
++ frames->initial_pool_size = 1;
++ // Add per-codec number of surfaces used for storing reference frames.
++ switch (avctx->codec_id) {
++ case AV_CODEC_ID_H264:
++ case AV_CODEC_ID_HEVC:
++ frames->initial_pool_size += 16;
++ break;
++ case AV_CODEC_ID_VP9:
++ frames->initial_pool_size += 8;
++ break;
++ case AV_CODEC_ID_VP8:
++ frames->initial_pool_size += 3;
++ break;
++ default:
++ frames->initial_pool_size += 2;
++ }
++ }
++
++ av_hwframe_constraints_free(&constraints);
++ av_freep(&hwconfig);
++
++ return 0;
++
++fail:
++ av_hwframe_constraints_free(&constraints);
++ av_freep(&hwconfig);
++ if (*va_config != VA_INVALID_ID) {
++ vaDestroyConfig(hwctx->display, *va_config);
++ *va_config = VA_INVALID_ID;
++ }
++ av_freep(&profile_list);
++ return err;
++}
++
++int ff_vaapi_common_frame_params(AVCodecContext *avctx,
++ AVBufferRef *hw_frames_ctx)
++{
++ AVHWFramesContext *hw_frames = (AVHWFramesContext *)hw_frames_ctx->data;
++ AVHWDeviceContext *device_ctx = hw_frames->device_ctx;
++ AVVAAPIDeviceContext *hwctx;
++ VAConfigID va_config = VA_INVALID_ID;
++ int err;
++
++ if (device_ctx->type != AV_HWDEVICE_TYPE_VAAPI)
++ return AVERROR(EINVAL);
++ hwctx = device_ctx->hwctx;
++
++ err = vaapi_decode_make_config(avctx, hw_frames->device_ref, &va_config,
++ hw_frames_ctx);
++ if (err)
++ return err;
++
++ if (va_config != VA_INVALID_ID)
++ vaDestroyConfig(hwctx->display, va_config);
++
++ return 0;
++}
++
++int ff_vaapi_decode_init(AVCodecContext *avctx)
++{
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ VAStatus vas;
++ int err;
++
++ ctx->va_config = VA_INVALID_ID;
++ ctx->va_context = VA_INVALID_ID;
++
++#if FF_API_STRUCT_VAAPI_CONTEXT
++ if (avctx->hwaccel_context) {
++ av_log(avctx, AV_LOG_WARNING, "Using deprecated struct "
++ "vaapi_context in decode.\n");
++
++ ctx->have_old_context = 1;
++ ctx->old_context = avctx->hwaccel_context;
++
++ // Really we only want the VAAPI device context, but this
++ // allocates a whole generic device context because we don't
++ // have any other way to determine how big it should be.
++ ctx->device_ref =
++ av_hwdevice_ctx_alloc(AV_HWDEVICE_TYPE_VAAPI);
++ if (!ctx->device_ref) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ ctx->device = (AVHWDeviceContext*)ctx->device_ref->data;
++ ctx->hwctx = ctx->device->hwctx;
++
++ ctx->hwctx->display = ctx->old_context->display;
++
++ // The old VAAPI decode setup assumed this quirk was always
++ // present, so set it here to avoid the behaviour changing.
++ ctx->hwctx->driver_quirks =
++ AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS;
++
++ }
++#endif
++
++#if FF_API_STRUCT_VAAPI_CONTEXT
++ if (ctx->have_old_context) {
++ ctx->va_config = ctx->old_context->config_id;
++ ctx->va_context = ctx->old_context->context_id;
++
++ av_log(avctx, AV_LOG_DEBUG, "Using user-supplied decoder "
++ "context: %#x/%#x.\n", ctx->va_config, ctx->va_context);
++ } else {
++#endif
++
++ err = ff_decode_get_hw_frames_ctx(avctx, AV_HWDEVICE_TYPE_VAAPI);
++ if (err < 0)
++ goto fail;
++
++ ctx->frames = (AVHWFramesContext*)avctx->hw_frames_ctx->data;
++ ctx->hwfc = ctx->frames->hwctx;
++ ctx->device = ctx->frames->device_ctx;
++ ctx->hwctx = ctx->device->hwctx;
++
++ err = vaapi_decode_make_config(avctx, ctx->frames->device_ref,
++ &ctx->va_config, avctx->hw_frames_ctx);
++ if (err)
++ goto fail;
++
++ vas = vaCreateContext(ctx->hwctx->display, ctx->va_config,
++ avctx->coded_width, avctx->coded_height,
++ VA_PROGRESSIVE,
++ ctx->hwfc->surface_ids,
++ ctx->hwfc->nb_surfaces,
++ &ctx->va_context);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to create decode "
++ "context: %d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++
++ av_log(avctx, AV_LOG_DEBUG, "Decode context initialised: "
++ "%#x/%#x.\n", ctx->va_config, ctx->va_context);
++#if FF_API_STRUCT_VAAPI_CONTEXT
++ }
++#endif
++
++ return 0;
++
++fail:
++ ff_vaapi_decode_uninit(avctx);
++ return err;
++}
++
++int ff_vaapi_decode_uninit(AVCodecContext *avctx)
++{
++ VAAPIDecodeContext *ctx = avctx->internal->hwaccel_priv_data;
++ VAStatus vas;
++
++#if FF_API_STRUCT_VAAPI_CONTEXT
++ if (ctx->have_old_context) {
++ av_buffer_unref(&ctx->device_ref);
++ } else {
++#endif
++
++ if (ctx->va_context != VA_INVALID_ID) {
++ vas = vaDestroyContext(ctx->hwctx->display, ctx->va_context);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to destroy decode "
++ "context %#x: %d (%s).\n",
++ ctx->va_context, vas, vaErrorStr(vas));
++ }
++ }
++ if (ctx->va_config != VA_INVALID_ID) {
++ vas = vaDestroyConfig(ctx->hwctx->display, ctx->va_config);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(avctx, AV_LOG_ERROR, "Failed to destroy decode "
++ "configuration %#x: %d (%s).\n",
++ ctx->va_config, vas, vaErrorStr(vas));
++ }
++ }
++
++#if FF_API_STRUCT_VAAPI_CONTEXT
++ }
++#endif
++
++ return 0;
++}
+diff -up firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.h.ffvpx firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.h
+--- firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.h.ffvpx 2020-12-10 17:03:31.732266209 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/vaapi_decode.h 2020-12-10 17:03:31.732266209 +0100
+@@ -0,0 +1,105 @@
++/*
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#ifndef AVCODEC_VAAPI_DECODE_H
++#define AVCODEC_VAAPI_DECODE_H
++
++#include <va/va.h>
++#include <va/va_dec_vp9.h>
++
++#include "libavutil/frame.h"
++#include "libavutil/hwcontext.h"
++#include "libavutil/hwcontext_vaapi.h"
++
++#include "avcodec.h"
++
++#include "version.h"
++#if FF_API_STRUCT_VAAPI_CONTEXT
++#include "vaapi.h"
++#endif
++
++static inline VASurfaceID ff_vaapi_get_surface_id(AVFrame *pic)
++{
++ return (uintptr_t)pic->data[3];
++}
++
++enum {
++ MAX_PARAM_BUFFERS = 16,
++};
++
++typedef struct VAAPIDecodePicture {
++ VASurfaceID output_surface;
++
++ int nb_param_buffers;
++ VABufferID param_buffers[MAX_PARAM_BUFFERS];
++
++ int nb_slices;
++ VABufferID *slice_buffers;
++ int slices_allocated;
++} VAAPIDecodePicture;
++
++typedef struct VAAPIDecodeContext {
++ VAConfigID va_config;
++ VAContextID va_context;
++
++#if FF_API_STRUCT_VAAPI_CONTEXT
++FF_DISABLE_DEPRECATION_WARNINGS
++ int have_old_context;
++ struct vaapi_context *old_context;
++ AVBufferRef *device_ref;
++FF_ENABLE_DEPRECATION_WARNINGS
++#endif
++
++ AVHWDeviceContext *device;
++ AVVAAPIDeviceContext *hwctx;
++
++ AVHWFramesContext *frames;
++ AVVAAPIFramesContext *hwfc;
++
++ enum AVPixelFormat surface_format;
++ int surface_count;
++
++ VASurfaceAttrib pixel_format_attribute;
++} VAAPIDecodeContext;
++
++
++int ff_vaapi_decode_make_param_buffer(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic,
++ int type,
++ const void *data,
++ size_t size);
++
++int ff_vaapi_decode_make_slice_buffer(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic,
++ const void *params_data,
++ size_t params_size,
++ const void *slice_data,
++ size_t slice_size);
++
++int ff_vaapi_decode_issue(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic);
++int ff_vaapi_decode_cancel(AVCodecContext *avctx,
++ VAAPIDecodePicture *pic);
++
++int ff_vaapi_decode_init(AVCodecContext *avctx);
++int ff_vaapi_decode_uninit(AVCodecContext *avctx);
++
++int ff_vaapi_common_frame_params(AVCodecContext *avctx,
++ AVBufferRef *hw_frames_ctx);
++
++#endif /* AVCODEC_VAAPI_DECODE_H */
+diff -up firefox-84.0/media/ffvpx/libavcodec/vaapi.h.ffvpx firefox-84.0/media/ffvpx/libavcodec/vaapi.h
+--- firefox-84.0/media/ffvpx/libavcodec/vaapi.h.ffvpx 2020-12-10 17:03:31.732266209 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/vaapi.h 2020-12-10 17:03:31.732266209 +0100
+@@ -0,0 +1,86 @@
++/*
++ * Video Acceleration API (shared data between FFmpeg and the video player)
++ * HW decode acceleration for MPEG-2, MPEG-4, H.264 and VC-1
++ *
++ * Copyright (C) 2008-2009 Splitted-Desktop Systems
++ *
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#ifndef AVCODEC_VAAPI_H
++#define AVCODEC_VAAPI_H
++
++/**
++ * @file
++ * @ingroup lavc_codec_hwaccel_vaapi
++ * Public libavcodec VA API header.
++ */
++
++#include <stdint.h>
++#include "libavutil/attributes.h"
++#include "version.h"
++
++#if FF_API_STRUCT_VAAPI_CONTEXT
++
++/**
++ * @defgroup lavc_codec_hwaccel_vaapi VA API Decoding
++ * @ingroup lavc_codec_hwaccel
++ * @{
++ */
++
++/**
++ * This structure is used to share data between the FFmpeg library and
++ * the client video application.
++ * This shall be zero-allocated and available as
++ * AVCodecContext.hwaccel_context. All user members can be set once
++ * during initialization or through each AVCodecContext.get_buffer()
++ * function call. In any case, they must be valid prior to calling
++ * decoding functions.
++ *
++ * Deprecated: use AVCodecContext.hw_frames_ctx instead.
++ */
++struct attribute_deprecated vaapi_context {
++ /**
++ * Window system dependent data
++ *
++ * - encoding: unused
++ * - decoding: Set by user
++ */
++ void *display;
++
++ /**
++ * Configuration ID
++ *
++ * - encoding: unused
++ * - decoding: Set by user
++ */
++ uint32_t config_id;
++
++ /**
++ * Context ID (video decode pipeline)
++ *
++ * - encoding: unused
++ * - decoding: Set by user
++ */
++ uint32_t context_id;
++};
++
++/* @} */
++
++#endif /* FF_API_STRUCT_VAAPI_CONTEXT */
++
++#endif /* AVCODEC_VAAPI_H */
+diff -up firefox-84.0/media/ffvpx/libavcodec/vaapi_vp8.c.ffvpx firefox-84.0/media/ffvpx/libavcodec/vaapi_vp8.c
+--- firefox-84.0/media/ffvpx/libavcodec/vaapi_vp8.c.ffvpx 2020-12-10 17:03:31.732266209 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/vaapi_vp8.c 2020-12-10 17:03:31.732266209 +0100
+@@ -0,0 +1,237 @@
++/*
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#include <va/va.h>
++#include <va/va_dec_vp8.h>
++
++#include "hwaccel.h"
++#include "vaapi_decode.h"
++#include "vp8.h"
++
++static VASurfaceID vaapi_vp8_surface_id(VP8Frame *vf)
++{
++ if (vf)
++ return ff_vaapi_get_surface_id(vf->tf.f);
++ else
++ return VA_INVALID_SURFACE;
++}
++
++static int vaapi_vp8_start_frame(AVCodecContext *avctx,
++ av_unused const uint8_t *buffer,
++ av_unused uint32_t size)
++{
++ const VP8Context *s = avctx->priv_data;
++ VAAPIDecodePicture *pic = s->framep[VP56_FRAME_CURRENT]->hwaccel_picture_private;
++ VAPictureParameterBufferVP8 pp;
++ VAProbabilityDataBufferVP8 prob;
++ VAIQMatrixBufferVP8 quant;
++ int err, i, j, k;
++
++ pic->output_surface = vaapi_vp8_surface_id(s->framep[VP56_FRAME_CURRENT]);
++
++ pp = (VAPictureParameterBufferVP8) {
++ .frame_width = avctx->width,
++ .frame_height = avctx->height,
++
++ .last_ref_frame = vaapi_vp8_surface_id(s->framep[VP56_FRAME_PREVIOUS]),
++ .golden_ref_frame = vaapi_vp8_surface_id(s->framep[VP56_FRAME_GOLDEN]),
++ .alt_ref_frame = vaapi_vp8_surface_id(s->framep[VP56_FRAME_GOLDEN2]),
++ .out_of_loop_frame = VA_INVALID_SURFACE,
++
++ .pic_fields.bits = {
++ .key_frame = !s->keyframe,
++ .version = s->profile,
++
++ .segmentation_enabled = s->segmentation.enabled,
++ .update_mb_segmentation_map = s->segmentation.update_map,
++ .update_segment_feature_data = s->segmentation.update_feature_data,
++
++ .filter_type = s->filter.simple,
++ .sharpness_level = s->filter.sharpness,
++
++ .loop_filter_adj_enable = s->lf_delta.enabled,
++ .mode_ref_lf_delta_update = s->lf_delta.update,
++
++ .sign_bias_golden = s->sign_bias[VP56_FRAME_GOLDEN],
++ .sign_bias_alternate = s->sign_bias[VP56_FRAME_GOLDEN2],
++
++ .mb_no_coeff_skip = s->mbskip_enabled,
++ .loop_filter_disable = s->filter.level == 0,
++ },
++
++ .prob_skip_false = s->prob->mbskip,
++ .prob_intra = s->prob->intra,
++ .prob_last = s->prob->last,
++ .prob_gf = s->prob->golden,
++ };
++
++ for (i = 0; i < 3; i++)
++ pp.mb_segment_tree_probs[i] = s->prob->segmentid[i];
++
++ for (i = 0; i < 4; i++) {
++ if (s->segmentation.enabled) {
++ pp.loop_filter_level[i] = s->segmentation.filter_level[i];
++ if (!s->segmentation.absolute_vals)
++ pp.loop_filter_level[i] += s->filter.level;
++ } else {
++ pp.loop_filter_level[i] = s->filter.level;
++ }
++ pp.loop_filter_level[i] = av_clip_uintp2(pp.loop_filter_level[i], 6);
++ }
++
++ for (i = 0; i < 4; i++) {
++ pp.loop_filter_deltas_ref_frame[i] = s->lf_delta.ref[i];
++ pp.loop_filter_deltas_mode[i] = s->lf_delta.mode[i + 4];
++ }
++
++ if (s->keyframe) {
++ static const uint8_t keyframe_y_mode_probs[4] = {
++ 145, 156, 163, 128
++ };
++ static const uint8_t keyframe_uv_mode_probs[3] = {
++ 142, 114, 183
++ };
++ memcpy(pp.y_mode_probs, keyframe_y_mode_probs, 4);
++ memcpy(pp.uv_mode_probs, keyframe_uv_mode_probs, 3);
++ } else {
++ for (i = 0; i < 4; i++)
++ pp.y_mode_probs[i] = s->prob->pred16x16[i];
++ for (i = 0; i < 3; i++)
++ pp.uv_mode_probs[i] = s->prob->pred8x8c[i];
++ }
++ for (i = 0; i < 2; i++)
++ for (j = 0; j < 19; j++)
++ pp.mv_probs[i][j] = s->prob->mvc[i][j];
++
++ pp.bool_coder_ctx.range = s->coder_state_at_header_end.range;
++ pp.bool_coder_ctx.value = s->coder_state_at_header_end.value;
++ pp.bool_coder_ctx.count = s->coder_state_at_header_end.bit_count;
++
++ err = ff_vaapi_decode_make_param_buffer(avctx, pic,
++ VAPictureParameterBufferType,
++ &pp, sizeof(pp));
++ if (err < 0)
++ goto fail;
++
++ for (i = 0; i < 4; i++) {
++ for (j = 0; j < 8; j++) {
++ static const int coeff_bands_inverse[8] = {
++ 0, 1, 2, 3, 5, 6, 4, 15
++ };
++ int coeff_pos = coeff_bands_inverse[j];
++
++ for (k = 0; k < 3; k++) {
++ memcpy(prob.dct_coeff_probs[i][j][k],
++ s->prob->token[i][coeff_pos][k], 11);
++ }
++ }
++ }
++
++ err = ff_vaapi_decode_make_param_buffer(avctx, pic,
++ VAProbabilityBufferType,
++ &prob, sizeof(prob));
++ if (err < 0)
++ goto fail;
++
++ for (i = 0; i < 4; i++) {
++ int base_qi = s->segmentation.base_quant[i];
++ if (!s->segmentation.absolute_vals)
++ base_qi += s->quant.yac_qi;
++
++ quant.quantization_index[i][0] = av_clip_uintp2(base_qi, 7);
++ quant.quantization_index[i][1] = av_clip_uintp2(base_qi + s->quant.ydc_delta, 7);
++ quant.quantization_index[i][2] = av_clip_uintp2(base_qi + s->quant.y2dc_delta, 7);
++ quant.quantization_index[i][3] = av_clip_uintp2(base_qi + s->quant.y2ac_delta, 7);
++ quant.quantization_index[i][4] = av_clip_uintp2(base_qi + s->quant.uvdc_delta, 7);
++ quant.quantization_index[i][5] = av_clip_uintp2(base_qi + s->quant.uvac_delta, 7);
++ }
++
++ err = ff_vaapi_decode_make_param_buffer(avctx, pic,
++ VAIQMatrixBufferType,
++ &quant, sizeof(quant));
++ if (err < 0)
++ goto fail;
++
++ return 0;
++
++fail:
++ ff_vaapi_decode_cancel(avctx, pic);
++ return err;
++}
++
++static int vaapi_vp8_end_frame(AVCodecContext *avctx)
++{
++ const VP8Context *s = avctx->priv_data;
++ VAAPIDecodePicture *pic = s->framep[VP56_FRAME_CURRENT]->hwaccel_picture_private;
++
++ return ff_vaapi_decode_issue(avctx, pic);
++}
++
++static int vaapi_vp8_decode_slice(AVCodecContext *avctx,
++ const uint8_t *buffer,
++ uint32_t size)
++{
++ const VP8Context *s = avctx->priv_data;
++ VAAPIDecodePicture *pic = s->framep[VP56_FRAME_CURRENT]->hwaccel_picture_private;
++ VASliceParameterBufferVP8 sp;
++ int err, i;
++
++ unsigned int header_size = 3 + 7 * s->keyframe;
++ const uint8_t *data = buffer + header_size;
++ unsigned int data_size = size - header_size;
++
++ sp = (VASliceParameterBufferVP8) {
++ .slice_data_size = data_size,
++ .slice_data_offset = 0,
++ .slice_data_flag = VA_SLICE_DATA_FLAG_ALL,
++
++ .macroblock_offset = (8 * (s->coder_state_at_header_end.input - data) -
++ s->coder_state_at_header_end.bit_count - 8),
++ .num_of_partitions = s->num_coeff_partitions + 1,
++ };
++
++ sp.partition_size[0] = s->header_partition_size - ((sp.macroblock_offset + 7) / 8);
++ for (i = 0; i < 8; i++)
++ sp.partition_size[i+1] = s->coeff_partition_size[i];
++
++ err = ff_vaapi_decode_make_slice_buffer(avctx, pic, &sp, sizeof(sp), data, data_size);
++ if (err)
++ goto fail;
++
++ return 0;
++
++fail:
++ ff_vaapi_decode_cancel(avctx, pic);
++ return err;
++}
++
++const AVHWAccel ff_vp8_vaapi_hwaccel = {
++ .name = "vp8_vaapi",
++ .type = AVMEDIA_TYPE_VIDEO,
++ .id = AV_CODEC_ID_VP8,
++ .pix_fmt = AV_PIX_FMT_VAAPI,
++ .start_frame = &vaapi_vp8_start_frame,
++ .end_frame = &vaapi_vp8_end_frame,
++ .decode_slice = &vaapi_vp8_decode_slice,
++ .frame_priv_data_size = sizeof(VAAPIDecodePicture),
++ .init = &ff_vaapi_decode_init,
++ .uninit = &ff_vaapi_decode_uninit,
++ .frame_params = &ff_vaapi_common_frame_params,
++ .priv_data_size = sizeof(VAAPIDecodeContext),
++ .caps_internal = HWACCEL_CAP_ASYNC_SAFE,
++};
+diff -up firefox-84.0/media/ffvpx/libavcodec/vaapi_vp9.c.ffvpx firefox-84.0/media/ffvpx/libavcodec/vaapi_vp9.c
+--- firefox-84.0/media/ffvpx/libavcodec/vaapi_vp9.c.ffvpx 2020-12-10 17:03:31.732266209 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/vaapi_vp9.c 2020-12-10 17:03:31.732266209 +0100
+@@ -0,0 +1,185 @@
++/*
++ * VP9 HW decode acceleration through VA API
++ *
++ * Copyright (C) 2015 Timo Rothenpieler <timo@rothenpieler.org>
++ *
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#include "libavutil/pixdesc.h"
++
++#include "hwaccel.h"
++#include "vaapi_decode.h"
++#include "vp9shared.h"
++
++static VASurfaceID vaapi_vp9_surface_id(const VP9Frame *vf)
++{
++ if (vf)
++ return ff_vaapi_get_surface_id(vf->tf.f);
++ else
++ return VA_INVALID_SURFACE;
++}
++
++static int vaapi_vp9_start_frame(AVCodecContext *avctx,
++ av_unused const uint8_t *buffer,
++ av_unused uint32_t size)
++{
++ const VP9SharedContext *h = avctx->priv_data;
++ VAAPIDecodePicture *pic = h->frames[CUR_FRAME].hwaccel_picture_private;
++ VADecPictureParameterBufferVP9 pic_param;
++ const AVPixFmtDescriptor *pixdesc = av_pix_fmt_desc_get(avctx->sw_pix_fmt);
++ int err, i;
++
++ pic->output_surface = vaapi_vp9_surface_id(&h->frames[CUR_FRAME]);
++
++ pic_param = (VADecPictureParameterBufferVP9) {
++ .frame_width = avctx->width,
++ .frame_height = avctx->height,
++
++ .pic_fields.bits = {
++ .subsampling_x = pixdesc->log2_chroma_w,
++ .subsampling_y = pixdesc->log2_chroma_h,
++ .frame_type = !h->h.keyframe,
++ .show_frame = !h->h.invisible,
++ .error_resilient_mode = h->h.errorres,
++ .intra_only = h->h.intraonly,
++ .allow_high_precision_mv = h->h.keyframe ? 0 : h->h.highprecisionmvs,
++ .mcomp_filter_type = h->h.filtermode ^ (h->h.filtermode <= 1),
++ .frame_parallel_decoding_mode = h->h.parallelmode,
++ .reset_frame_context = h->h.resetctx,
++ .refresh_frame_context = h->h.refreshctx,
++ .frame_context_idx = h->h.framectxid,
++
++ .segmentation_enabled = h->h.segmentation.enabled,
++ .segmentation_temporal_update = h->h.segmentation.temporal,
++ .segmentation_update_map = h->h.segmentation.update_map,
++
++ .last_ref_frame = h->h.refidx[0],
++ .last_ref_frame_sign_bias = h->h.signbias[0],
++ .golden_ref_frame = h->h.refidx[1],
++ .golden_ref_frame_sign_bias = h->h.signbias[1],
++ .alt_ref_frame = h->h.refidx[2],
++ .alt_ref_frame_sign_bias = h->h.signbias[2],
++ .lossless_flag = h->h.lossless,
++ },
++
++ .filter_level = h->h.filter.level,
++ .sharpness_level = h->h.filter.sharpness,
++ .log2_tile_rows = h->h.tiling.log2_tile_rows,
++ .log2_tile_columns = h->h.tiling.log2_tile_cols,
++
++ .frame_header_length_in_bytes = h->h.uncompressed_header_size,
++ .first_partition_size = h->h.compressed_header_size,
++
++ .profile = h->h.profile,
++ .bit_depth = h->h.bpp,
++ };
++
++ for (i = 0; i < 7; i++)
++ pic_param.mb_segment_tree_probs[i] = h->h.segmentation.prob[i];
++
++ if (h->h.segmentation.temporal) {
++ for (i = 0; i < 3; i++)
++ pic_param.segment_pred_probs[i] = h->h.segmentation.pred_prob[i];
++ } else {
++ memset(pic_param.segment_pred_probs, 255, sizeof(pic_param.segment_pred_probs));
++ }
++
++ for (i = 0; i < 8; i++) {
++ if (h->refs[i].f->buf[0])
++ pic_param.reference_frames[i] = ff_vaapi_get_surface_id(h->refs[i].f);
++ else
++ pic_param.reference_frames[i] = VA_INVALID_ID;
++ }
++
++ err = ff_vaapi_decode_make_param_buffer(avctx, pic,
++ VAPictureParameterBufferType,
++ &pic_param, sizeof(pic_param));
++ if (err < 0) {
++ ff_vaapi_decode_cancel(avctx, pic);
++ return err;
++ }
++
++ return 0;
++}
++
++static int vaapi_vp9_end_frame(AVCodecContext *avctx)
++{
++ const VP9SharedContext *h = avctx->priv_data;
++ VAAPIDecodePicture *pic = h->frames[CUR_FRAME].hwaccel_picture_private;
++
++ return ff_vaapi_decode_issue(avctx, pic);
++}
++
++static int vaapi_vp9_decode_slice(AVCodecContext *avctx,
++ const uint8_t *buffer,
++ uint32_t size)
++{
++ const VP9SharedContext *h = avctx->priv_data;
++ VAAPIDecodePicture *pic = h->frames[CUR_FRAME].hwaccel_picture_private;
++ VASliceParameterBufferVP9 slice_param;
++ int err, i;
++
++ slice_param = (VASliceParameterBufferVP9) {
++ .slice_data_size = size,
++ .slice_data_offset = 0,
++ .slice_data_flag = VA_SLICE_DATA_FLAG_ALL,
++ };
++
++ for (i = 0; i < 8; i++) {
++ slice_param.seg_param[i] = (VASegmentParameterVP9) {
++ .segment_flags.fields = {
++ .segment_reference_enabled = h->h.segmentation.feat[i].ref_enabled,
++ .segment_reference = h->h.segmentation.feat[i].ref_val,
++ .segment_reference_skipped = h->h.segmentation.feat[i].skip_enabled,
++ },
++
++ .luma_dc_quant_scale = h->h.segmentation.feat[i].qmul[0][0],
++ .luma_ac_quant_scale = h->h.segmentation.feat[i].qmul[0][1],
++ .chroma_dc_quant_scale = h->h.segmentation.feat[i].qmul[1][0],
++ .chroma_ac_quant_scale = h->h.segmentation.feat[i].qmul[1][1],
++ };
++
++ memcpy(slice_param.seg_param[i].filter_level, h->h.segmentation.feat[i].lflvl, sizeof(slice_param.seg_param[i].filter_level));
++ }
++
++ err = ff_vaapi_decode_make_slice_buffer(avctx, pic,
++ &slice_param, sizeof(slice_param),
++ buffer, size);
++ if (err) {
++ ff_vaapi_decode_cancel(avctx, pic);
++ return err;
++ }
++
++ return 0;
++}
++
++const AVHWAccel ff_vp9_vaapi_hwaccel = {
++ .name = "vp9_vaapi",
++ .type = AVMEDIA_TYPE_VIDEO,
++ .id = AV_CODEC_ID_VP9,
++ .pix_fmt = AV_PIX_FMT_VAAPI,
++ .start_frame = vaapi_vp9_start_frame,
++ .end_frame = vaapi_vp9_end_frame,
++ .decode_slice = vaapi_vp9_decode_slice,
++ .frame_priv_data_size = sizeof(VAAPIDecodePicture),
++ .init = ff_vaapi_decode_init,
++ .uninit = ff_vaapi_decode_uninit,
++ .frame_params = ff_vaapi_common_frame_params,
++ .priv_data_size = sizeof(VAAPIDecodeContext),
++ .caps_internal = HWACCEL_CAP_ASYNC_SAFE,
++};
+diff -up firefox-84.0/media/ffvpx/libavutil/avutil.symbols.ffvpx firefox-84.0/media/ffvpx/libavutil/avutil.symbols
+--- firefox-84.0/media/ffvpx/libavutil/avutil.symbols.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/libavutil/avutil.symbols 2020-12-10 17:03:31.732266209 +0100
+@@ -158,6 +158,9 @@ av_get_token
+ av_gettime
+ av_gettime_relative
+ av_gettime_relative_is_monotonic
++av_hwdevice_get_hwframe_constraints
++av_hwdevice_hwconfig_alloc
++av_hwframe_constraints_free
+ av_hwframe_get_buffer
+ av_image_alloc
+ av_image_check_sar
+@@ -320,5 +323,9 @@ avpriv_slicethread_free
+ av_hwdevice_get_type_name
+ av_hwframe_ctx_alloc
+ av_hwframe_ctx_init
++av_hwdevice_ctx_alloc
++av_hwdevice_ctx_init
++av_hwframe_transfer_get_formats
++av_hwdevice_ctx_create_derived
+ av_malloc_array
+ av_mallocz_array
+diff -up firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.c.ffvpx firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.c
+--- firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.c.ffvpx 2020-12-10 17:03:31.732266209 +0100
++++ firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.c 2020-12-10 17:03:31.732266209 +0100
+@@ -0,0 +1,1691 @@
++/*
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#include "config.h"
++
++#if HAVE_VAAPI_X11
++# include <va/va_x11.h>
++#endif
++#if HAVE_VAAPI_DRM
++# include <va/va_drm.h>
++#endif
++
++#if CONFIG_LIBDRM
++# include <va/va_drmcommon.h>
++# include <xf86drm.h>
++# include <drm_fourcc.h>
++# ifndef DRM_FORMAT_MOD_INVALID
++# define DRM_FORMAT_MOD_INVALID ((1ULL << 56) - 1)
++# endif
++#endif
++
++#include <fcntl.h>
++#if HAVE_UNISTD_H
++# include <unistd.h>
++#endif
++
++
++#include "avassert.h"
++#include "buffer.h"
++#include "common.h"
++#include "hwcontext.h"
++#if CONFIG_LIBDRM
++#include "hwcontext_drm.h"
++#endif
++#include "hwcontext_internal.h"
++#include "hwcontext_vaapi.h"
++#include "mem.h"
++#include "pixdesc.h"
++#include "pixfmt.h"
++
++
++typedef struct VAAPIDevicePriv {
++#if HAVE_VAAPI_X11
++ Display *x11_display;
++#endif
++
++ int drm_fd;
++} VAAPIDevicePriv;
++
++typedef struct VAAPISurfaceFormat {
++ enum AVPixelFormat pix_fmt;
++ VAImageFormat image_format;
++} VAAPISurfaceFormat;
++
++typedef struct VAAPIDeviceContext {
++ // Surface formats which can be used with this device.
++ VAAPISurfaceFormat *formats;
++ int nb_formats;
++} VAAPIDeviceContext;
++
++typedef struct VAAPIFramesContext {
++ // Surface attributes set at create time.
++ VASurfaceAttrib *attributes;
++ int nb_attributes;
++ // RT format of the underlying surface (Intel driver ignores this anyway).
++ unsigned int rt_format;
++ // Whether vaDeriveImage works.
++ int derive_works;
++} VAAPIFramesContext;
++
++typedef struct VAAPIMapping {
++ // Handle to the derived or copied image which is mapped.
++ VAImage image;
++ // The mapping flags actually used.
++ int flags;
++} VAAPIMapping;
++
++typedef struct VAAPIFormat {
++ unsigned int fourcc;
++ unsigned int rt_format;
++ enum AVPixelFormat pix_fmt;
++ int chroma_planes_swapped;
++} VAAPIFormatDescriptor;
++
++#define MAP(va, rt, av, swap_uv) { \
++ VA_FOURCC_ ## va, \
++ VA_RT_FORMAT_ ## rt, \
++ AV_PIX_FMT_ ## av, \
++ swap_uv, \
++ }
++// The map fourcc <-> pix_fmt isn't bijective because of the annoying U/V
++// plane swap cases. The frame handling below tries to hide these.
++static const VAAPIFormatDescriptor vaapi_format_map[] = {
++ MAP(NV12, YUV420, NV12, 0),
++#ifdef VA_FOURCC_I420
++ MAP(I420, YUV420, YUV420P, 0),
++#endif
++ MAP(YV12, YUV420, YUV420P, 1),
++ MAP(IYUV, YUV420, YUV420P, 0),
++ MAP(422H, YUV422, YUV422P, 0),
++#ifdef VA_FOURCC_YV16
++ MAP(YV16, YUV422, YUV422P, 1),
++#endif
++ MAP(UYVY, YUV422, UYVY422, 0),
++ MAP(YUY2, YUV422, YUYV422, 0),
++ MAP(411P, YUV411, YUV411P, 0),
++ MAP(422V, YUV422, YUV440P, 0),
++ MAP(444P, YUV444, YUV444P, 0),
++ MAP(Y800, YUV400, GRAY8, 0),
++#ifdef VA_FOURCC_P010
++ MAP(P010, YUV420_10BPP, P010, 0),
++#endif
++ MAP(BGRA, RGB32, BGRA, 0),
++ MAP(BGRX, RGB32, BGR0, 0),
++ MAP(RGBA, RGB32, RGBA, 0),
++ MAP(RGBX, RGB32, RGB0, 0),
++#ifdef VA_FOURCC_ABGR
++ MAP(ABGR, RGB32, ABGR, 0),
++ MAP(XBGR, RGB32, 0BGR, 0),
++#endif
++ MAP(ARGB, RGB32, ARGB, 0),
++ MAP(XRGB, RGB32, 0RGB, 0),
++};
++#undef MAP
++
++static const VAAPIFormatDescriptor *
++ vaapi_format_from_fourcc(unsigned int fourcc)
++{
++ int i;
++ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_format_map); i++)
++ if (vaapi_format_map[i].fourcc == fourcc)
++ return &vaapi_format_map[i];
++ return NULL;
++}
++
++static const VAAPIFormatDescriptor *
++ vaapi_format_from_pix_fmt(enum AVPixelFormat pix_fmt)
++{
++ int i;
++ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_format_map); i++)
++ if (vaapi_format_map[i].pix_fmt == pix_fmt)
++ return &vaapi_format_map[i];
++ return NULL;
++}
++
++static enum AVPixelFormat vaapi_pix_fmt_from_fourcc(unsigned int fourcc)
++{
++ const VAAPIFormatDescriptor *desc;
++ desc = vaapi_format_from_fourcc(fourcc);
++ if (desc)
++ return desc->pix_fmt;
++ else
++ return AV_PIX_FMT_NONE;
++}
++
++static int vaapi_get_image_format(AVHWDeviceContext *hwdev,
++ enum AVPixelFormat pix_fmt,
++ VAImageFormat **image_format)
++{
++ VAAPIDeviceContext *ctx = hwdev->internal->priv;
++ int i;
++
++ for (i = 0; i < ctx->nb_formats; i++) {
++ if (ctx->formats[i].pix_fmt == pix_fmt) {
++ if (image_format)
++ *image_format = &ctx->formats[i].image_format;
++ return 0;
++ }
++ }
++ return AVERROR(EINVAL);
++}
++
++static int vaapi_frames_get_constraints(AVHWDeviceContext *hwdev,
++ const void *hwconfig,
++ AVHWFramesConstraints *constraints)
++{
++ AVVAAPIDeviceContext *hwctx = hwdev->hwctx;
++ const AVVAAPIHWConfig *config = hwconfig;
++ VAAPIDeviceContext *ctx = hwdev->internal->priv;
++ VASurfaceAttrib *attr_list = NULL;
++ VAStatus vas;
++ enum AVPixelFormat pix_fmt;
++ unsigned int fourcc;
++ int err, i, j, attr_count, pix_fmt_count;
++
++ if (config &&
++ !(hwctx->driver_quirks & AV_VAAPI_DRIVER_QUIRK_SURFACE_ATTRIBUTES)) {
++ attr_count = 0;
++ vas = vaQuerySurfaceAttributes(hwctx->display, config->config_id,
++ 0, &attr_count);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwdev, AV_LOG_ERROR, "Failed to query surface attributes: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(ENOSYS);
++ goto fail;
++ }
++
++ attr_list = av_malloc(attr_count * sizeof(*attr_list));
++ if (!attr_list) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++
++ vas = vaQuerySurfaceAttributes(hwctx->display, config->config_id,
++ attr_list, &attr_count);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwdev, AV_LOG_ERROR, "Failed to query surface attributes: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ err = AVERROR(ENOSYS);
++ goto fail;
++ }
++
++ pix_fmt_count = 0;
++ for (i = 0; i < attr_count; i++) {
++ switch (attr_list[i].type) {
++ case VASurfaceAttribPixelFormat:
++ fourcc = attr_list[i].value.value.i;
++ pix_fmt = vaapi_pix_fmt_from_fourcc(fourcc);
++ if (pix_fmt != AV_PIX_FMT_NONE) {
++ ++pix_fmt_count;
++ } else {
++ // Something unsupported - ignore.
++ }
++ break;
++ case VASurfaceAttribMinWidth:
++ constraints->min_width = attr_list[i].value.value.i;
++ break;
++ case VASurfaceAttribMinHeight:
++ constraints->min_height = attr_list[i].value.value.i;
++ break;
++ case VASurfaceAttribMaxWidth:
++ constraints->max_width = attr_list[i].value.value.i;
++ break;
++ case VASurfaceAttribMaxHeight:
++ constraints->max_height = attr_list[i].value.value.i;
++ break;
++ }
++ }
++ if (pix_fmt_count == 0) {
++ // Nothing usable found. Presumably there exists something which
++ // works, so leave the set null to indicate unknown.
++ constraints->valid_sw_formats = NULL;
++ } else {
++ constraints->valid_sw_formats = av_malloc_array(pix_fmt_count + 1,
++ sizeof(pix_fmt));
++ if (!constraints->valid_sw_formats) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++
++ for (i = j = 0; i < attr_count; i++) {
++ if (attr_list[i].type != VASurfaceAttribPixelFormat)
++ continue;
++ fourcc = attr_list[i].value.value.i;
++ pix_fmt = vaapi_pix_fmt_from_fourcc(fourcc);
++ if (pix_fmt != AV_PIX_FMT_NONE)
++ constraints->valid_sw_formats[j++] = pix_fmt;
++ }
++ av_assert0(j == pix_fmt_count);
++ constraints->valid_sw_formats[j] = AV_PIX_FMT_NONE;
++ }
++ } else {
++ // No configuration supplied.
++ // Return the full set of image formats known by the implementation.
++ constraints->valid_sw_formats = av_malloc_array(ctx->nb_formats + 1,
++ sizeof(pix_fmt));
++ if (!constraints->valid_sw_formats) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ for (i = 0; i < ctx->nb_formats; i++)
++ constraints->valid_sw_formats[i] = ctx->formats[i].pix_fmt;
++ constraints->valid_sw_formats[i] = AV_PIX_FMT_NONE;
++ }
++
++ constraints->valid_hw_formats = av_malloc_array(2, sizeof(pix_fmt));
++ if (!constraints->valid_hw_formats) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ constraints->valid_hw_formats[0] = AV_PIX_FMT_VAAPI;
++ constraints->valid_hw_formats[1] = AV_PIX_FMT_NONE;
++
++ err = 0;
++fail:
++ av_freep(&attr_list);
++ return err;
++}
++
++static const struct {
++ const char *friendly_name;
++ const char *match_string;
++ unsigned int quirks;
++} vaapi_driver_quirks_table[] = {
++#if !VA_CHECK_VERSION(1, 0, 0)
++ // The i965 driver did not conform before version 2.0.
++ {
++ "Intel i965 (Quick Sync)",
++ "i965",
++ AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS,
++ },
++#endif
++ {
++ "Intel iHD",
++ "ubit",
++ AV_VAAPI_DRIVER_QUIRK_ATTRIB_MEMTYPE,
++ },
++ {
++ "VDPAU wrapper",
++ "Splitted-Desktop Systems VDPAU backend for VA-API",
++ AV_VAAPI_DRIVER_QUIRK_SURFACE_ATTRIBUTES,
++ },
++};
++
++static int vaapi_device_init(AVHWDeviceContext *hwdev)
++{
++ VAAPIDeviceContext *ctx = hwdev->internal->priv;
++ AVVAAPIDeviceContext *hwctx = hwdev->hwctx;
++ VAImageFormat *image_list = NULL;
++ VAStatus vas;
++ const char *vendor_string;
++ int err, i, image_count;
++ enum AVPixelFormat pix_fmt;
++ unsigned int fourcc;
++
++ image_count = vaMaxNumImageFormats(hwctx->display);
++ if (image_count <= 0) {
++ err = AVERROR(EIO);
++ goto fail;
++ }
++ image_list = av_malloc(image_count * sizeof(*image_list));
++ if (!image_list) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ vas = vaQueryImageFormats(hwctx->display, image_list, &image_count);
++ if (vas != VA_STATUS_SUCCESS) {
++ err = AVERROR(EIO);
++ goto fail;
++ }
++
++ ctx->formats = av_malloc(image_count * sizeof(*ctx->formats));
++ if (!ctx->formats) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ ctx->nb_formats = 0;
++ for (i = 0; i < image_count; i++) {
++ fourcc = image_list[i].fourcc;
++ pix_fmt = vaapi_pix_fmt_from_fourcc(fourcc);
++ if (pix_fmt == AV_PIX_FMT_NONE) {
++ av_log(hwdev, AV_LOG_DEBUG, "Format %#x -> unknown.\n",
++ fourcc);
++ } else {
++ av_log(hwdev, AV_LOG_DEBUG, "Format %#x -> %s.\n",
++ fourcc, av_get_pix_fmt_name(pix_fmt));
++ ctx->formats[ctx->nb_formats].pix_fmt = pix_fmt;
++ ctx->formats[ctx->nb_formats].image_format = image_list[i];
++ ++ctx->nb_formats;
++ }
++ }
++
++ vendor_string = vaQueryVendorString(hwctx->display);
++ if (vendor_string)
++ av_log(hwdev, AV_LOG_VERBOSE, "VAAPI driver: %s.\n", vendor_string);
++
++ if (hwctx->driver_quirks & AV_VAAPI_DRIVER_QUIRK_USER_SET) {
++ av_log(hwdev, AV_LOG_VERBOSE, "Using quirks set by user (%#x).\n",
++ hwctx->driver_quirks);
++ } else {
++ // Detect the driver in use and set quirk flags if necessary.
++ hwctx->driver_quirks = 0;
++ if (vendor_string) {
++ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_driver_quirks_table); i++) {
++ if (strstr(vendor_string,
++ vaapi_driver_quirks_table[i].match_string)) {
++ av_log(hwdev, AV_LOG_VERBOSE, "Matched driver string "
++ "as known nonstandard driver \"%s\", setting "
++ "quirks (%#x).\n",
++ vaapi_driver_quirks_table[i].friendly_name,
++ vaapi_driver_quirks_table[i].quirks);
++ hwctx->driver_quirks |=
++ vaapi_driver_quirks_table[i].quirks;
++ break;
++ }
++ }
++ if (!(i < FF_ARRAY_ELEMS(vaapi_driver_quirks_table))) {
++ av_log(hwdev, AV_LOG_VERBOSE, "Driver not found in known "
++ "nonstandard list, using standard behaviour.\n");
++ }
++ } else {
++ av_log(hwdev, AV_LOG_VERBOSE, "Driver has no vendor string, "
++ "assuming standard behaviour.\n");
++ }
++ }
++
++ av_free(image_list);
++ return 0;
++fail:
++ av_freep(&ctx->formats);
++ av_free(image_list);
++ return err;
++}
++
++static void vaapi_device_uninit(AVHWDeviceContext *hwdev)
++{
++ VAAPIDeviceContext *ctx = hwdev->internal->priv;
++
++ av_freep(&ctx->formats);
++}
++
++static void vaapi_buffer_free(void *opaque, uint8_t *data)
++{
++ AVHWFramesContext *hwfc = opaque;
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ VASurfaceID surface_id;
++ VAStatus vas;
++
++ surface_id = (VASurfaceID)(uintptr_t)data;
++
++ vas = vaDestroySurfaces(hwctx->display, &surface_id, 1);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to destroy surface %#x: "
++ "%d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ }
++}
++
++static AVBufferRef *vaapi_pool_alloc(void *opaque, int size)
++{
++ AVHWFramesContext *hwfc = opaque;
++ VAAPIFramesContext *ctx = hwfc->internal->priv;
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ AVVAAPIFramesContext *avfc = hwfc->hwctx;
++ VASurfaceID surface_id;
++ VAStatus vas;
++ AVBufferRef *ref;
++
++ if (hwfc->initial_pool_size > 0 &&
++ avfc->nb_surfaces >= hwfc->initial_pool_size)
++ return NULL;
++
++ vas = vaCreateSurfaces(hwctx->display, ctx->rt_format,
++ hwfc->width, hwfc->height,
++ &surface_id, 1,
++ ctx->attributes, ctx->nb_attributes);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to create surface: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ return NULL;
++ }
++ av_log(hwfc, AV_LOG_DEBUG, "Created surface %#x.\n", surface_id);
++
++ ref = av_buffer_create((uint8_t*)(uintptr_t)surface_id,
++ sizeof(surface_id), &vaapi_buffer_free,
++ hwfc, AV_BUFFER_FLAG_READONLY);
++ if (!ref) {
++ vaDestroySurfaces(hwctx->display, &surface_id, 1);
++ return NULL;
++ }
++
++ if (hwfc->initial_pool_size > 0) {
++ // This is a fixed-size pool, so we must still be in the initial
++ // allocation sequence.
++ av_assert0(avfc->nb_surfaces < hwfc->initial_pool_size);
++ avfc->surface_ids[avfc->nb_surfaces] = surface_id;
++ ++avfc->nb_surfaces;
++ }
++
++ return ref;
++}
++
++static int vaapi_frames_init(AVHWFramesContext *hwfc)
++{
++ AVVAAPIFramesContext *avfc = hwfc->hwctx;
++ VAAPIFramesContext *ctx = hwfc->internal->priv;
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ const VAAPIFormatDescriptor *desc;
++ VAImageFormat *expected_format;
++ AVBufferRef *test_surface = NULL;
++ VASurfaceID test_surface_id;
++ VAImage test_image;
++ VAStatus vas;
++ int err, i;
++
++ desc = vaapi_format_from_pix_fmt(hwfc->sw_format);
++ if (!desc) {
++ av_log(hwfc, AV_LOG_ERROR, "Unsupported format: %s.\n",
++ av_get_pix_fmt_name(hwfc->sw_format));
++ return AVERROR(EINVAL);
++ }
++
++ if (!hwfc->pool) {
++ if (!(hwctx->driver_quirks & AV_VAAPI_DRIVER_QUIRK_SURFACE_ATTRIBUTES)) {
++ int need_memory_type = !(hwctx->driver_quirks & AV_VAAPI_DRIVER_QUIRK_ATTRIB_MEMTYPE);
++ int need_pixel_format = 1;
++ for (i = 0; i < avfc->nb_attributes; i++) {
++ if (avfc->attributes[i].type == VASurfaceAttribMemoryType)
++ need_memory_type = 0;
++ if (avfc->attributes[i].type == VASurfaceAttribPixelFormat)
++ need_pixel_format = 0;
++ }
++ ctx->nb_attributes =
++ avfc->nb_attributes + need_memory_type + need_pixel_format;
++
++ ctx->attributes = av_malloc(ctx->nb_attributes *
++ sizeof(*ctx->attributes));
++ if (!ctx->attributes) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++
++ for (i = 0; i < avfc->nb_attributes; i++)
++ ctx->attributes[i] = avfc->attributes[i];
++ if (need_memory_type) {
++ ctx->attributes[i++] = (VASurfaceAttrib) {
++ .type = VASurfaceAttribMemoryType,
++ .flags = VA_SURFACE_ATTRIB_SETTABLE,
++ .value.type = VAGenericValueTypeInteger,
++ .value.value.i = VA_SURFACE_ATTRIB_MEM_TYPE_VA,
++ };
++ }
++ if (need_pixel_format) {
++ ctx->attributes[i++] = (VASurfaceAttrib) {
++ .type = VASurfaceAttribPixelFormat,
++ .flags = VA_SURFACE_ATTRIB_SETTABLE,
++ .value.type = VAGenericValueTypeInteger,
++ .value.value.i = desc->fourcc,
++ };
++ }
++ av_assert0(i == ctx->nb_attributes);
++ } else {
++ ctx->attributes = NULL;
++ ctx->nb_attributes = 0;
++ }
++
++ ctx->rt_format = desc->rt_format;
++
++ if (hwfc->initial_pool_size > 0) {
++ // This pool will be usable as a render target, so we need to store
++ // all of the surface IDs somewhere that vaCreateContext() calls
++ // will be able to access them.
++ avfc->nb_surfaces = 0;
++ avfc->surface_ids = av_malloc(hwfc->initial_pool_size *
++ sizeof(*avfc->surface_ids));
++ if (!avfc->surface_ids) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ } else {
++ // This pool allows dynamic sizing, and will not be usable as a
++ // render target.
++ avfc->nb_surfaces = 0;
++ avfc->surface_ids = NULL;
++ }
++
++ hwfc->internal->pool_internal =
++ av_buffer_pool_init2(sizeof(VASurfaceID), hwfc,
++ &vaapi_pool_alloc, NULL);
++ if (!hwfc->internal->pool_internal) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to create VAAPI surface pool.\n");
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ }
++
++ // Allocate a single surface to test whether vaDeriveImage() is going
++ // to work for the specific configuration.
++ if (hwfc->pool) {
++ test_surface = av_buffer_pool_get(hwfc->pool);
++ if (!test_surface) {
++ av_log(hwfc, AV_LOG_ERROR, "Unable to allocate a surface from "
++ "user-configured buffer pool.\n");
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ } else {
++ test_surface = av_buffer_pool_get(hwfc->internal->pool_internal);
++ if (!test_surface) {
++ av_log(hwfc, AV_LOG_ERROR, "Unable to allocate a surface from "
++ "internal buffer pool.\n");
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++ }
++ test_surface_id = (VASurfaceID)(uintptr_t)test_surface->data;
++
++ ctx->derive_works = 0;
++
++ err = vaapi_get_image_format(hwfc->device_ctx,
++ hwfc->sw_format, &expected_format);
++ if (err == 0) {
++ vas = vaDeriveImage(hwctx->display, test_surface_id, &test_image);
++ if (vas == VA_STATUS_SUCCESS) {
++ if (expected_format->fourcc == test_image.format.fourcc) {
++ av_log(hwfc, AV_LOG_DEBUG, "Direct mapping possible.\n");
++ ctx->derive_works = 1;
++ } else {
++ av_log(hwfc, AV_LOG_DEBUG, "Direct mapping disabled: "
++ "derived image format %08x does not match "
++ "expected format %08x.\n",
++ expected_format->fourcc, test_image.format.fourcc);
++ }
++ vaDestroyImage(hwctx->display, test_image.image_id);
++ } else {
++ av_log(hwfc, AV_LOG_DEBUG, "Direct mapping disabled: "
++ "deriving image does not work: "
++ "%d (%s).\n", vas, vaErrorStr(vas));
++ }
++ } else {
++ av_log(hwfc, AV_LOG_DEBUG, "Direct mapping disabled: "
++ "image format is not supported.\n");
++ }
++
++ av_buffer_unref(&test_surface);
++ return 0;
++
++fail:
++ av_buffer_unref(&test_surface);
++ av_freep(&avfc->surface_ids);
++ av_freep(&ctx->attributes);
++ return err;
++}
++
++static void vaapi_frames_uninit(AVHWFramesContext *hwfc)
++{
++ AVVAAPIFramesContext *avfc = hwfc->hwctx;
++ VAAPIFramesContext *ctx = hwfc->internal->priv;
++
++ av_freep(&avfc->surface_ids);
++ av_freep(&ctx->attributes);
++}
++
++static int vaapi_get_buffer(AVHWFramesContext *hwfc, AVFrame *frame)
++{
++ frame->buf[0] = av_buffer_pool_get(hwfc->pool);
++ if (!frame->buf[0])
++ return AVERROR(ENOMEM);
++
++ frame->data[3] = frame->buf[0]->data;
++ frame->format = AV_PIX_FMT_VAAPI;
++ frame->width = hwfc->width;
++ frame->height = hwfc->height;
++
++ return 0;
++}
++
++static int vaapi_transfer_get_formats(AVHWFramesContext *hwfc,
++ enum AVHWFrameTransferDirection dir,
++ enum AVPixelFormat **formats)
++{
++ VAAPIDeviceContext *ctx = hwfc->device_ctx->internal->priv;
++ enum AVPixelFormat *pix_fmts;
++ int i, k, sw_format_available;
++
++ sw_format_available = 0;
++ for (i = 0; i < ctx->nb_formats; i++) {
++ if (ctx->formats[i].pix_fmt == hwfc->sw_format)
++ sw_format_available = 1;
++ }
++
++ pix_fmts = av_malloc((ctx->nb_formats + 1) * sizeof(*pix_fmts));
++ if (!pix_fmts)
++ return AVERROR(ENOMEM);
++
++ if (sw_format_available) {
++ pix_fmts[0] = hwfc->sw_format;
++ k = 1;
++ } else {
++ k = 0;
++ }
++ for (i = 0; i < ctx->nb_formats; i++) {
++ if (ctx->formats[i].pix_fmt == hwfc->sw_format)
++ continue;
++ av_assert0(k < ctx->nb_formats);
++ pix_fmts[k++] = ctx->formats[i].pix_fmt;
++ }
++ pix_fmts[k] = AV_PIX_FMT_NONE;
++
++ *formats = pix_fmts;
++ return 0;
++}
++
++static void vaapi_unmap_frame(AVHWFramesContext *hwfc,
++ HWMapDescriptor *hwmap)
++{
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ VAAPIMapping *map = hwmap->priv;
++ VASurfaceID surface_id;
++ VAStatus vas;
++
++ surface_id = (VASurfaceID)(uintptr_t)hwmap->source->data[3];
++ av_log(hwfc, AV_LOG_DEBUG, "Unmap surface %#x.\n", surface_id);
++
++ vas = vaUnmapBuffer(hwctx->display, map->image.buf);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to unmap image from surface "
++ "%#x: %d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ }
++
++ if ((map->flags & AV_HWFRAME_MAP_WRITE) &&
++ !(map->flags & AV_HWFRAME_MAP_DIRECT)) {
++ vas = vaPutImage(hwctx->display, surface_id, map->image.image_id,
++ 0, 0, hwfc->width, hwfc->height,
++ 0, 0, hwfc->width, hwfc->height);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to write image to surface "
++ "%#x: %d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ }
++ }
++
++ vas = vaDestroyImage(hwctx->display, map->image.image_id);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to destroy image from surface "
++ "%#x: %d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ }
++
++ av_free(map);
++}
++
++static int vaapi_map_frame(AVHWFramesContext *hwfc,
++ AVFrame *dst, const AVFrame *src, int flags)
++{
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ VAAPIFramesContext *ctx = hwfc->internal->priv;
++ VASurfaceID surface_id;
++ const VAAPIFormatDescriptor *desc;
++ VAImageFormat *image_format;
++ VAAPIMapping *map;
++ VAStatus vas;
++ void *address = NULL;
++ int err, i;
++
++ surface_id = (VASurfaceID)(uintptr_t)src->data[3];
++ av_log(hwfc, AV_LOG_DEBUG, "Map surface %#x.\n", surface_id);
++
++ if (!ctx->derive_works && (flags & AV_HWFRAME_MAP_DIRECT)) {
++ // Requested direct mapping but it is not possible.
++ return AVERROR(EINVAL);
++ }
++ if (dst->format == AV_PIX_FMT_NONE)
++ dst->format = hwfc->sw_format;
++ if (dst->format != hwfc->sw_format && (flags & AV_HWFRAME_MAP_DIRECT)) {
++ // Requested direct mapping but the formats do not match.
++ return AVERROR(EINVAL);
++ }
++
++ err = vaapi_get_image_format(hwfc->device_ctx, dst->format, &image_format);
++ if (err < 0) {
++ // Requested format is not a valid output format.
++ return AVERROR(EINVAL);
++ }
++
++ map = av_malloc(sizeof(*map));
++ if (!map)
++ return AVERROR(ENOMEM);
++ map->flags = flags;
++ map->image.image_id = VA_INVALID_ID;
++
++ vas = vaSyncSurface(hwctx->display, surface_id);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to sync surface "
++ "%#x: %d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++
++ // The memory which we map using derive need not be connected to the CPU
++ // in a way conducive to fast access. On Gen7-Gen9 Intel graphics, the
++ // memory is mappable but not cached, so normal memcpy()-like access is
++ // very slow to read it (but writing is ok). It is possible to read much
++ // faster with a copy routine which is aware of the limitation, but we
++ // assume for now that the user is not aware of that and would therefore
++ // prefer not to be given direct-mapped memory if they request read access.
++ if (ctx->derive_works && dst->format == hwfc->sw_format &&
++ ((flags & AV_HWFRAME_MAP_DIRECT) || !(flags & AV_HWFRAME_MAP_READ))) {
++ vas = vaDeriveImage(hwctx->display, surface_id, &map->image);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to derive image from "
++ "surface %#x: %d (%s).\n",
++ surface_id, vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++ if (map->image.format.fourcc != image_format->fourcc) {
++ av_log(hwfc, AV_LOG_ERROR, "Derive image of surface %#x "
++ "is in wrong format: expected %#08x, got %#08x.\n",
++ surface_id, image_format->fourcc, map->image.format.fourcc);
++ err = AVERROR(EIO);
++ goto fail;
++ }
++ map->flags |= AV_HWFRAME_MAP_DIRECT;
++ } else {
++ vas = vaCreateImage(hwctx->display, image_format,
++ hwfc->width, hwfc->height, &map->image);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to create image for "
++ "surface %#x: %d (%s).\n",
++ surface_id, vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++ if (!(flags & AV_HWFRAME_MAP_OVERWRITE)) {
++ vas = vaGetImage(hwctx->display, surface_id, 0, 0,
++ hwfc->width, hwfc->height, map->image.image_id);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to read image from "
++ "surface %#x: %d (%s).\n",
++ surface_id, vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++ }
++ }
++
++ vas = vaMapBuffer(hwctx->display, map->image.buf, &address);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to map image from surface "
++ "%#x: %d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++
++ err = ff_hwframe_map_create(src->hw_frames_ctx,
++ dst, src, &vaapi_unmap_frame, map);
++ if (err < 0)
++ goto fail;
++
++ dst->width = src->width;
++ dst->height = src->height;
++
++ for (i = 0; i < map->image.num_planes; i++) {
++ dst->data[i] = (uint8_t*)address + map->image.offsets[i];
++ dst->linesize[i] = map->image.pitches[i];
++ }
++
++ desc = vaapi_format_from_fourcc(map->image.format.fourcc);
++ if (desc && desc->chroma_planes_swapped) {
++ // Chroma planes are YVU rather than YUV, so swap them.
++ FFSWAP(uint8_t*, dst->data[1], dst->data[2]);
++ }
++
++ return 0;
++
++fail:
++ if (map) {
++ if (address)
++ vaUnmapBuffer(hwctx->display, map->image.buf);
++ if (map->image.image_id != VA_INVALID_ID)
++ vaDestroyImage(hwctx->display, map->image.image_id);
++ av_free(map);
++ }
++ return err;
++}
++
++static int vaapi_transfer_data_from(AVHWFramesContext *hwfc,
++ AVFrame *dst, const AVFrame *src)
++{
++ AVFrame *map;
++ int err;
++
++ if (dst->width > hwfc->width || dst->height > hwfc->height)
++ return AVERROR(EINVAL);
++
++ map = av_frame_alloc();
++ if (!map)
++ return AVERROR(ENOMEM);
++ map->format = dst->format;
++
++ err = vaapi_map_frame(hwfc, map, src, AV_HWFRAME_MAP_READ);
++ if (err)
++ goto fail;
++
++ map->width = dst->width;
++ map->height = dst->height;
++
++ err = av_frame_copy(dst, map);
++ if (err)
++ goto fail;
++
++ err = 0;
++fail:
++ av_frame_free(&map);
++ return err;
++}
++
++static int vaapi_transfer_data_to(AVHWFramesContext *hwfc,
++ AVFrame *dst, const AVFrame *src)
++{
++ AVFrame *map;
++ int err;
++
++ if (src->width > hwfc->width || src->height > hwfc->height)
++ return AVERROR(EINVAL);
++
++ map = av_frame_alloc();
++ if (!map)
++ return AVERROR(ENOMEM);
++ map->format = src->format;
++
++ err = vaapi_map_frame(hwfc, map, dst, AV_HWFRAME_MAP_WRITE | AV_HWFRAME_MAP_OVERWRITE);
++ if (err)
++ goto fail;
++
++ map->width = src->width;
++ map->height = src->height;
++
++ err = av_frame_copy(map, src);
++ if (err)
++ goto fail;
++
++ err = 0;
++fail:
++ av_frame_free(&map);
++ return err;
++}
++
++static int vaapi_map_to_memory(AVHWFramesContext *hwfc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++ int err;
++
++ if (dst->format != AV_PIX_FMT_NONE) {
++ err = vaapi_get_image_format(hwfc->device_ctx, dst->format, NULL);
++ if (err < 0)
++ return AVERROR(ENOSYS);
++ }
++
++ err = vaapi_map_frame(hwfc, dst, src, flags);
++ if (err)
++ return err;
++
++ err = av_frame_copy_props(dst, src);
++ if (err)
++ return err;
++
++ return 0;
++}
++
++#if CONFIG_LIBDRM
++
++#define DRM_MAP(va, layers, ...) { \
++ VA_FOURCC_ ## va, \
++ layers, \
++ { __VA_ARGS__ } \
++ }
++static const struct {
++ uint32_t va_fourcc;
++ int nb_layer_formats;
++ uint32_t layer_formats[AV_DRM_MAX_PLANES];
++} vaapi_drm_format_map[] = {
++#ifdef DRM_FORMAT_R8
++ DRM_MAP(NV12, 2, DRM_FORMAT_R8, DRM_FORMAT_RG88),
++#endif
++ DRM_MAP(NV12, 1, DRM_FORMAT_NV12),
++#if defined(VA_FOURCC_P010) && defined(DRM_FORMAT_R16)
++ DRM_MAP(P010, 2, DRM_FORMAT_R16, DRM_FORMAT_RG1616),
++#endif
++ DRM_MAP(BGRA, 1, DRM_FORMAT_ARGB8888),
++ DRM_MAP(BGRX, 1, DRM_FORMAT_XRGB8888),
++ DRM_MAP(RGBA, 1, DRM_FORMAT_ABGR8888),
++ DRM_MAP(RGBX, 1, DRM_FORMAT_XBGR8888),
++#ifdef VA_FOURCC_ABGR
++ DRM_MAP(ABGR, 1, DRM_FORMAT_RGBA8888),
++ DRM_MAP(XBGR, 1, DRM_FORMAT_RGBX8888),
++#endif
++ DRM_MAP(ARGB, 1, DRM_FORMAT_BGRA8888),
++ DRM_MAP(XRGB, 1, DRM_FORMAT_BGRX8888),
++};
++#undef DRM_MAP
++
++static void vaapi_unmap_from_drm(AVHWFramesContext *dst_fc,
++ HWMapDescriptor *hwmap)
++{
++ AVVAAPIDeviceContext *dst_dev = dst_fc->device_ctx->hwctx;
++
++ VASurfaceID surface_id = (VASurfaceID)(uintptr_t)hwmap->priv;
++
++ av_log(dst_fc, AV_LOG_DEBUG, "Destroy surface %#x.\n", surface_id);
++
++ vaDestroySurfaces(dst_dev->display, &surface_id, 1);
++}
++
++static int vaapi_map_from_drm(AVHWFramesContext *src_fc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++ AVHWFramesContext *dst_fc =
++ (AVHWFramesContext*)dst->hw_frames_ctx->data;
++ AVVAAPIDeviceContext *dst_dev = dst_fc->device_ctx->hwctx;
++ const AVDRMFrameDescriptor *desc;
++ const VAAPIFormatDescriptor *format_desc;
++ VASurfaceID surface_id;
++ VAStatus vas;
++ uint32_t va_fourcc;
++ int err, i, j, k;
++
++ unsigned long buffer_handle;
++ VASurfaceAttribExternalBuffers buffer_desc;
++ VASurfaceAttrib attrs[2] = {
++ {
++ .type = VASurfaceAttribMemoryType,
++ .flags = VA_SURFACE_ATTRIB_SETTABLE,
++ .value.type = VAGenericValueTypeInteger,
++ .value.value.i = VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME,
++ },
++ {
++ .type = VASurfaceAttribExternalBufferDescriptor,
++ .flags = VA_SURFACE_ATTRIB_SETTABLE,
++ .value.type = VAGenericValueTypePointer,
++ .value.value.p = &buffer_desc,
++ }
++ };
++
++ desc = (AVDRMFrameDescriptor*)src->data[0];
++
++ if (desc->nb_objects != 1) {
++ av_log(dst_fc, AV_LOG_ERROR, "VAAPI can only map frames "
++ "made from a single DRM object.\n");
++ return AVERROR(EINVAL);
++ }
++
++ va_fourcc = 0;
++ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_drm_format_map); i++) {
++ if (desc->nb_layers != vaapi_drm_format_map[i].nb_layer_formats)
++ continue;
++ for (j = 0; j < desc->nb_layers; j++) {
++ if (desc->layers[j].format !=
++ vaapi_drm_format_map[i].layer_formats[j])
++ break;
++ }
++ if (j != desc->nb_layers)
++ continue;
++ va_fourcc = vaapi_drm_format_map[i].va_fourcc;
++ break;
++ }
++ if (!va_fourcc) {
++ av_log(dst_fc, AV_LOG_ERROR, "DRM format not supported "
++ "by VAAPI.\n");
++ return AVERROR(EINVAL);
++ }
++
++ av_log(dst_fc, AV_LOG_DEBUG, "Map DRM object %d to VAAPI as "
++ "%08x.\n", desc->objects[0].fd, va_fourcc);
++
++ format_desc = vaapi_format_from_fourcc(va_fourcc);
++ av_assert0(format_desc);
++
++ buffer_handle = desc->objects[0].fd;
++ buffer_desc.pixel_format = va_fourcc;
++ buffer_desc.width = src_fc->width;
++ buffer_desc.height = src_fc->height;
++ buffer_desc.data_size = desc->objects[0].size;
++ buffer_desc.buffers = &buffer_handle;
++ buffer_desc.num_buffers = 1;
++ buffer_desc.flags = 0;
++
++ k = 0;
++ for (i = 0; i < desc->nb_layers; i++) {
++ for (j = 0; j < desc->layers[i].nb_planes; j++) {
++ buffer_desc.pitches[k] = desc->layers[i].planes[j].pitch;
++ buffer_desc.offsets[k] = desc->layers[i].planes[j].offset;
++ ++k;
++ }
++ }
++ buffer_desc.num_planes = k;
++
++ if (format_desc->chroma_planes_swapped &&
++ buffer_desc.num_planes == 3) {
++ FFSWAP(uint32_t, buffer_desc.pitches[1], buffer_desc.pitches[2]);
++ FFSWAP(uint32_t, buffer_desc.offsets[1], buffer_desc.offsets[2]);
++ }
++
++ vas = vaCreateSurfaces(dst_dev->display, format_desc->rt_format,
++ src->width, src->height,
++ &surface_id, 1,
++ attrs, FF_ARRAY_ELEMS(attrs));
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(dst_fc, AV_LOG_ERROR, "Failed to create surface from DRM "
++ "object: %d (%s).\n", vas, vaErrorStr(vas));
++ return AVERROR(EIO);
++ }
++ av_log(dst_fc, AV_LOG_DEBUG, "Create surface %#x.\n", surface_id);
++
++ err = ff_hwframe_map_create(dst->hw_frames_ctx, dst, src,
++ &vaapi_unmap_from_drm,
++ (void*)(uintptr_t)surface_id);
++ if (err < 0)
++ return err;
++
++ dst->width = src->width;
++ dst->height = src->height;
++ dst->data[3] = (uint8_t*)(uintptr_t)surface_id;
++
++ av_log(dst_fc, AV_LOG_DEBUG, "Mapped DRM object %d to "
++ "surface %#x.\n", desc->objects[0].fd, surface_id);
++
++ return 0;
++}
++
++#if VA_CHECK_VERSION(1, 1, 0)
++static void vaapi_unmap_to_drm_esh(AVHWFramesContext *hwfc,
++ HWMapDescriptor *hwmap)
++{
++ AVDRMFrameDescriptor *drm_desc = hwmap->priv;
++ int i;
++
++ for (i = 0; i < drm_desc->nb_objects; i++)
++ close(drm_desc->objects[i].fd);
++
++ av_freep(&drm_desc);
++}
++
++static int vaapi_map_to_drm_esh(AVHWFramesContext *hwfc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ VASurfaceID surface_id;
++ VAStatus vas;
++ VADRMPRIMESurfaceDescriptor va_desc;
++ AVDRMFrameDescriptor *drm_desc = NULL;
++ uint32_t export_flags;
++ int err, i, j;
++
++ surface_id = (VASurfaceID)(uintptr_t)src->data[3];
++
++ export_flags = VA_EXPORT_SURFACE_SEPARATE_LAYERS;
++ if (flags & AV_HWFRAME_MAP_READ)
++ export_flags |= VA_EXPORT_SURFACE_READ_ONLY;
++ if (flags & AV_HWFRAME_MAP_WRITE)
++ export_flags |= VA_EXPORT_SURFACE_WRITE_ONLY;
++
++ vas = vaExportSurfaceHandle(hwctx->display, surface_id,
++ VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME_2,
++ export_flags, &va_desc);
++ if (vas != VA_STATUS_SUCCESS) {
++ if (vas == VA_STATUS_ERROR_UNIMPLEMENTED)
++ return AVERROR(ENOSYS);
++ av_log(hwfc, AV_LOG_ERROR, "Failed to export surface %#x: "
++ "%d (%s).\n", surface_id, vas, vaErrorStr(vas));
++ return AVERROR(EIO);
++ }
++
++ drm_desc = av_mallocz(sizeof(*drm_desc));
++ if (!drm_desc) {
++ err = AVERROR(ENOMEM);
++ goto fail;
++ }
++
++ // By some bizarre coincidence, these structures are very similar...
++ drm_desc->nb_objects = va_desc.num_objects;
++ for (i = 0; i < va_desc.num_objects; i++) {
++ drm_desc->objects[i].fd = va_desc.objects[i].fd;
++ drm_desc->objects[i].size = va_desc.objects[i].size;
++ drm_desc->objects[i].format_modifier =
++ va_desc.objects[i].drm_format_modifier;
++ }
++ drm_desc->nb_layers = va_desc.num_layers;
++ for (i = 0; i < va_desc.num_layers; i++) {
++ drm_desc->layers[i].format = va_desc.layers[i].drm_format;
++ drm_desc->layers[i].nb_planes = va_desc.layers[i].num_planes;
++ for (j = 0; j < va_desc.layers[i].num_planes; j++) {
++ drm_desc->layers[i].planes[j].object_index =
++ va_desc.layers[i].object_index[j];
++ drm_desc->layers[i].planes[j].offset =
++ va_desc.layers[i].offset[j];
++ drm_desc->layers[i].planes[j].pitch =
++ va_desc.layers[i].pitch[j];
++ }
++ }
++
++ err = ff_hwframe_map_create(src->hw_frames_ctx, dst, src,
++ &vaapi_unmap_to_drm_esh, drm_desc);
++ if (err < 0)
++ goto fail;
++
++ dst->width = src->width;
++ dst->height = src->height;
++ dst->data[0] = (uint8_t*)drm_desc;
++
++ return 0;
++
++fail:
++ for (i = 0; i < va_desc.num_objects; i++)
++ close(va_desc.objects[i].fd);
++ av_freep(&drm_desc);
++ return err;
++}
++#endif
++
++#if VA_CHECK_VERSION(0, 36, 0)
++typedef struct VAAPIDRMImageBufferMapping {
++ VAImage image;
++ VABufferInfo buffer_info;
++
++ AVDRMFrameDescriptor drm_desc;
++} VAAPIDRMImageBufferMapping;
++
++static void vaapi_unmap_to_drm_abh(AVHWFramesContext *hwfc,
++ HWMapDescriptor *hwmap)
++{
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ VAAPIDRMImageBufferMapping *mapping = hwmap->priv;
++ VASurfaceID surface_id;
++ VAStatus vas;
++
++ surface_id = (VASurfaceID)(uintptr_t)hwmap->source->data[3];
++ av_log(hwfc, AV_LOG_DEBUG, "Unmap VAAPI surface %#x from DRM.\n",
++ surface_id);
++
++ // DRM PRIME file descriptors are closed by vaReleaseBufferHandle(),
++ // so we shouldn't close them separately.
++
++ vas = vaReleaseBufferHandle(hwctx->display, mapping->image.buf);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to release buffer "
++ "handle of image %#x (derived from surface %#x): "
++ "%d (%s).\n", mapping->image.buf, surface_id,
++ vas, vaErrorStr(vas));
++ }
++
++ vas = vaDestroyImage(hwctx->display, mapping->image.image_id);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to destroy image "
++ "derived from surface %#x: %d (%s).\n",
++ surface_id, vas, vaErrorStr(vas));
++ }
++
++ av_free(mapping);
++}
++
++static int vaapi_map_to_drm_abh(AVHWFramesContext *hwfc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++ AVVAAPIDeviceContext *hwctx = hwfc->device_ctx->hwctx;
++ VAAPIDRMImageBufferMapping *mapping = NULL;
++ VASurfaceID surface_id;
++ VAStatus vas;
++ int err, i, p;
++
++ surface_id = (VASurfaceID)(uintptr_t)src->data[3];
++ av_log(hwfc, AV_LOG_DEBUG, "Map VAAPI surface %#x to DRM.\n",
++ surface_id);
++
++ mapping = av_mallocz(sizeof(*mapping));
++ if (!mapping)
++ return AVERROR(ENOMEM);
++
++ vas = vaDeriveImage(hwctx->display, surface_id,
++ &mapping->image);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to derive image from "
++ "surface %#x: %d (%s).\n",
++ surface_id, vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail;
++ }
++
++ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_drm_format_map); i++) {
++ if (vaapi_drm_format_map[i].va_fourcc ==
++ mapping->image.format.fourcc)
++ break;
++ }
++ if (i >= FF_ARRAY_ELEMS(vaapi_drm_format_map)) {
++ av_log(hwfc, AV_LOG_ERROR, "No matching DRM format for "
++ "VAAPI format %#x.\n", mapping->image.format.fourcc);
++ err = AVERROR(EINVAL);
++ goto fail_derived;
++ }
++
++ mapping->buffer_info.mem_type =
++ VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME;
++
++ mapping->drm_desc.nb_layers =
++ vaapi_drm_format_map[i].nb_layer_formats;
++ if (mapping->drm_desc.nb_layers > 1) {
++ if (mapping->drm_desc.nb_layers != mapping->image.num_planes) {
++ av_log(hwfc, AV_LOG_ERROR, "Image properties do not match "
++ "expected format: got %d planes, but expected %d.\n",
++ mapping->image.num_planes, mapping->drm_desc.nb_layers);
++ err = AVERROR(EINVAL);
++ goto fail_derived;
++ }
++
++ for(p = 0; p < mapping->drm_desc.nb_layers; p++) {
++ mapping->drm_desc.layers[p] = (AVDRMLayerDescriptor) {
++ .format = vaapi_drm_format_map[i].layer_formats[p],
++ .nb_planes = 1,
++ .planes[0] = {
++ .object_index = 0,
++ .offset = mapping->image.offsets[p],
++ .pitch = mapping->image.pitches[p],
++ },
++ };
++ }
++ } else {
++ mapping->drm_desc.layers[0].format =
++ vaapi_drm_format_map[i].layer_formats[0];
++ mapping->drm_desc.layers[0].nb_planes = mapping->image.num_planes;
++ for (p = 0; p < mapping->image.num_planes; p++) {
++ mapping->drm_desc.layers[0].planes[p] = (AVDRMPlaneDescriptor) {
++ .object_index = 0,
++ .offset = mapping->image.offsets[p],
++ .pitch = mapping->image.pitches[p],
++ };
++ }
++ }
++
++ vas = vaAcquireBufferHandle(hwctx->display, mapping->image.buf,
++ &mapping->buffer_info);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(hwfc, AV_LOG_ERROR, "Failed to get buffer "
++ "handle from image %#x (derived from surface %#x): "
++ "%d (%s).\n", mapping->image.buf, surface_id,
++ vas, vaErrorStr(vas));
++ err = AVERROR(EIO);
++ goto fail_derived;
++ }
++
++ av_log(hwfc, AV_LOG_DEBUG, "DRM PRIME fd is %ld.\n",
++ mapping->buffer_info.handle);
++
++ mapping->drm_desc.nb_objects = 1;
++ mapping->drm_desc.objects[0] = (AVDRMObjectDescriptor) {
++ .fd = mapping->buffer_info.handle,
++ .size = mapping->image.data_size,
++ // There is no way to get the format modifier with this API.
++ .format_modifier = DRM_FORMAT_MOD_INVALID,
++ };
++
++ err = ff_hwframe_map_create(src->hw_frames_ctx,
++ dst, src, &vaapi_unmap_to_drm_abh,
++ mapping);
++ if (err < 0)
++ goto fail_mapped;
++
++ dst->data[0] = (uint8_t*)&mapping->drm_desc;
++ dst->width = src->width;
++ dst->height = src->height;
++
++ return 0;
++
++fail_mapped:
++ vaReleaseBufferHandle(hwctx->display, mapping->image.buf);
++fail_derived:
++ vaDestroyImage(hwctx->display, mapping->image.image_id);
++fail:
++ av_freep(&mapping);
++ return err;
++}
++#endif
++
++static int vaapi_map_to_drm(AVHWFramesContext *hwfc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++#if VA_CHECK_VERSION(1, 1, 0)
++ int err;
++ err = vaapi_map_to_drm_esh(hwfc, dst, src, flags);
++ if (err != AVERROR(ENOSYS))
++ return err;
++#endif
++#if VA_CHECK_VERSION(0, 36, 0)
++ return vaapi_map_to_drm_abh(hwfc, dst, src, flags);
++#endif
++ return AVERROR(ENOSYS);
++}
++
++#endif /* CONFIG_LIBDRM */
++
++static int vaapi_map_to(AVHWFramesContext *hwfc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++ switch (src->format) {
++#if CONFIG_LIBDRM
++ case AV_PIX_FMT_DRM_PRIME:
++ return vaapi_map_from_drm(hwfc, dst, src, flags);
++#endif
++ default:
++ return AVERROR(ENOSYS);
++ }
++}
++
++static int vaapi_map_from(AVHWFramesContext *hwfc, AVFrame *dst,
++ const AVFrame *src, int flags)
++{
++ switch (dst->format) {
++#if CONFIG_LIBDRM
++ case AV_PIX_FMT_DRM_PRIME:
++ return vaapi_map_to_drm(hwfc, dst, src, flags);
++#endif
++ default:
++ return vaapi_map_to_memory(hwfc, dst, src, flags);
++ }
++}
++
++static void vaapi_device_free(AVHWDeviceContext *ctx)
++{
++ AVVAAPIDeviceContext *hwctx = ctx->hwctx;
++ VAAPIDevicePriv *priv = ctx->user_opaque;
++
++ if (hwctx->display)
++ vaTerminate(hwctx->display);
++
++#if HAVE_VAAPI_X11
++ if (priv->x11_display)
++ XCloseDisplay(priv->x11_display);
++#endif
++
++ if (priv->drm_fd >= 0)
++ close(priv->drm_fd);
++
++ av_freep(&priv);
++}
++
++#if CONFIG_VAAPI_1
++static void vaapi_device_log_error(void *context, const char *message)
++{
++ AVHWDeviceContext *ctx = context;
++
++ av_log(ctx, AV_LOG_ERROR, "libva: %s", message);
++}
++
++static void vaapi_device_log_info(void *context, const char *message)
++{
++ AVHWDeviceContext *ctx = context;
++
++ av_log(ctx, AV_LOG_VERBOSE, "libva: %s", message);
++}
++#endif
++
++static int vaapi_device_connect(AVHWDeviceContext *ctx,
++ VADisplay display)
++{
++ AVVAAPIDeviceContext *hwctx = ctx->hwctx;
++ int major, minor;
++ VAStatus vas;
++
++#if CONFIG_VAAPI_1
++ vaSetErrorCallback(display, &vaapi_device_log_error, ctx);
++ vaSetInfoCallback (display, &vaapi_device_log_info, ctx);
++#endif
++
++ hwctx->display = display;
++
++ vas = vaInitialize(display, &major, &minor);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(ctx, AV_LOG_ERROR, "Failed to initialise VAAPI "
++ "connection: %d (%s).\n", vas, vaErrorStr(vas));
++ return AVERROR(EIO);
++ }
++ av_log(ctx, AV_LOG_VERBOSE, "Initialised VAAPI connection: "
++ "version %d.%d\n", major, minor);
++
++ return 0;
++}
++
++static int vaapi_device_create(AVHWDeviceContext *ctx, const char *device,
++ AVDictionary *opts, int flags)
++{
++ VAAPIDevicePriv *priv;
++ VADisplay display = NULL;
++ const AVDictionaryEntry *ent;
++ int try_drm, try_x11, try_all;
++
++ priv = av_mallocz(sizeof(*priv));
++ if (!priv)
++ return AVERROR(ENOMEM);
++
++ priv->drm_fd = -1;
++
++ ctx->user_opaque = priv;
++ ctx->free = vaapi_device_free;
++
++ ent = av_dict_get(opts, "connection_type", NULL, 0);
++ if (ent) {
++ try_all = try_drm = try_x11 = 0;
++ if (!strcmp(ent->value, "drm")) {
++ try_drm = 1;
++ } else if (!strcmp(ent->value, "x11")) {
++ try_x11 = 1;
++ } else {
++ av_log(ctx, AV_LOG_ERROR, "Invalid connection type %s.\n",
++ ent->value);
++ return AVERROR(EINVAL);
++ }
++ } else {
++ try_all = 1;
++ try_drm = HAVE_VAAPI_DRM;
++ try_x11 = HAVE_VAAPI_X11;
++ }
++
++#if HAVE_VAAPI_DRM
++ while (!display && try_drm) {
++ // If the device is specified, try to open it as a DRM device node.
++ // If not, look for a usable render node, possibly restricted to those
++ // using a specified kernel driver.
++ int loglevel = try_all ? AV_LOG_VERBOSE : AV_LOG_ERROR;
++ if (device) {
++ priv->drm_fd = open(device, O_RDWR);
++ if (priv->drm_fd < 0) {
++ av_log(ctx, loglevel, "Failed to open %s as "
++ "DRM device node.\n", device);
++ break;
++ }
++ } else {
++ char path[64];
++ int n, max_devices = 8;
++#if CONFIG_LIBDRM
++ const AVDictionaryEntry *kernel_driver;
++ kernel_driver = av_dict_get(opts, "kernel_driver", NULL, 0);
++#endif
++ for (n = 0; n < max_devices; n++) {
++ snprintf(path, sizeof(path),
++ "/dev/dri/renderD%d", 128 + n);
++ priv->drm_fd = open(path, O_RDWR);
++ if (priv->drm_fd < 0) {
++ av_log(ctx, AV_LOG_VERBOSE, "Cannot open "
++ "DRM render node for device %d.\n", n);
++ break;
++ }
++#if CONFIG_LIBDRM
++ if (kernel_driver) {
++ drmVersion *info;
++ info = drmGetVersion(priv->drm_fd);
++ if (strcmp(kernel_driver->value, info->name)) {
++ av_log(ctx, AV_LOG_VERBOSE, "Ignoring device %d "
++ "with non-matching kernel driver (%s).\n",
++ n, info->name);
++ drmFreeVersion(info);
++ close(priv->drm_fd);
++ priv->drm_fd = -1;
++ continue;
++ }
++ av_log(ctx, AV_LOG_VERBOSE, "Trying to use "
++ "DRM render node for device %d, "
++ "with matching kernel driver (%s).\n",
++ n, info->name);
++ drmFreeVersion(info);
++ } else
++#endif
++ {
++ av_log(ctx, AV_LOG_VERBOSE, "Trying to use "
++ "DRM render node for device %d.\n", n);
++ }
++ break;
++ }
++ if (n >= max_devices)
++ break;
++ }
++
++ display = vaGetDisplayDRM(priv->drm_fd);
++ if (!display) {
++ av_log(ctx, AV_LOG_VERBOSE, "Cannot open a VA display "
++ "from DRM device %s.\n", device);
++ return AVERROR_EXTERNAL;
++ }
++ break;
++ }
++#endif
++
++#if HAVE_VAAPI_X11
++ if (!display && try_x11) {
++ // Try to open the device as an X11 display.
++ priv->x11_display = XOpenDisplay(device);
++ if (!priv->x11_display) {
++ av_log(ctx, AV_LOG_VERBOSE, "Cannot open X11 display "
++ "%s.\n", XDisplayName(device));
++ } else {
++ display = vaGetDisplay(priv->x11_display);
++ if (!display) {
++ av_log(ctx, AV_LOG_ERROR, "Cannot open a VA display "
++ "from X11 display %s.\n", XDisplayName(device));
++ return AVERROR_UNKNOWN;
++ }
++
++ av_log(ctx, AV_LOG_VERBOSE, "Opened VA display via "
++ "X11 display %s.\n", XDisplayName(device));
++ }
++ }
++#endif
++
++ if (!display) {
++ if (device)
++ av_log(ctx, AV_LOG_ERROR, "No VA display found for "
++ "device %s.\n", device);
++ else
++ av_log(ctx, AV_LOG_ERROR, "No VA display found for "
++ "any default device.\n");
++ return AVERROR(EINVAL);
++ }
++
++ ent = av_dict_get(opts, "driver", NULL, 0);
++ if (ent) {
++#if VA_CHECK_VERSION(0, 38, 0)
++ VAStatus vas;
++ vas = vaSetDriverName(display, ent->value);
++ if (vas != VA_STATUS_SUCCESS) {
++ av_log(ctx, AV_LOG_ERROR, "Failed to set driver name to "
++ "%s: %d (%s).\n", ent->value, vas, vaErrorStr(vas));
++ vaTerminate(display);
++ return AVERROR_EXTERNAL;
++ }
++#else
++ av_log(ctx, AV_LOG_WARNING, "Driver name setting is not "
++ "supported with this VAAPI version.\n");
++#endif
++ }
++
++ return vaapi_device_connect(ctx, display);
++}
++
++static int vaapi_device_derive(AVHWDeviceContext *ctx,
++ AVHWDeviceContext *src_ctx, int flags)
++{
++#if HAVE_VAAPI_DRM
++ if (src_ctx->type == AV_HWDEVICE_TYPE_DRM) {
++ AVDRMDeviceContext *src_hwctx = src_ctx->hwctx;
++ VADisplay *display;
++ VAAPIDevicePriv *priv;
++
++ if (src_hwctx->fd < 0) {
++ av_log(ctx, AV_LOG_ERROR, "DRM instance requires an associated "
++ "device to derive a VA display from.\n");
++ return AVERROR(EINVAL);
++ }
++
++ priv = av_mallocz(sizeof(*priv));
++ if (!priv)
++ return AVERROR(ENOMEM);
++
++ // Inherits the fd from the source context, which will close it.
++ priv->drm_fd = -1;
++
++ ctx->user_opaque = priv;
++ ctx->free = &vaapi_device_free;
++
++ display = vaGetDisplayDRM(src_hwctx->fd);
++ if (!display) {
++ av_log(ctx, AV_LOG_ERROR, "Failed to open a VA display from "
++ "DRM device.\n");
++ return AVERROR(EIO);
++ }
++
++ return vaapi_device_connect(ctx, display);
++ }
++#endif
++ return AVERROR(ENOSYS);
++}
++
++const HWContextType ff_hwcontext_type_vaapi = {
++ .type = AV_HWDEVICE_TYPE_VAAPI,
++ .name = "VAAPI",
++
++ .device_hwctx_size = sizeof(AVVAAPIDeviceContext),
++ .device_priv_size = sizeof(VAAPIDeviceContext),
++ .device_hwconfig_size = sizeof(AVVAAPIHWConfig),
++ .frames_hwctx_size = sizeof(AVVAAPIFramesContext),
++ .frames_priv_size = sizeof(VAAPIFramesContext),
++
++ .device_create = &vaapi_device_create,
++ .device_derive = &vaapi_device_derive,
++ .device_init = &vaapi_device_init,
++ .device_uninit = &vaapi_device_uninit,
++ .frames_get_constraints = &vaapi_frames_get_constraints,
++ .frames_init = &vaapi_frames_init,
++ .frames_uninit = &vaapi_frames_uninit,
++ .frames_get_buffer = &vaapi_get_buffer,
++ .transfer_get_formats = &vaapi_transfer_get_formats,
++ .transfer_data_to = &vaapi_transfer_data_to,
++ .transfer_data_from = &vaapi_transfer_data_from,
++ .map_to = &vaapi_map_to,
++ .map_from = &vaapi_map_from,
++
++ .pix_fmts = (const enum AVPixelFormat[]) {
++ AV_PIX_FMT_VAAPI,
++ AV_PIX_FMT_NONE
++ },
++};
+diff -up firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.h.ffvpx firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.h
+--- firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.h.ffvpx 2020-12-10 17:03:31.733266237 +0100
++++ firefox-84.0/media/ffvpx/libavutil/hwcontext_vaapi.h 2020-12-10 17:03:31.733266237 +0100
+@@ -0,0 +1,117 @@
++/*
++ * This file is part of FFmpeg.
++ *
++ * FFmpeg is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU Lesser General Public
++ * License as published by the Free Software Foundation; either
++ * version 2.1 of the License, or (at your option) any later version.
++ *
++ * FFmpeg is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public
++ * License along with FFmpeg; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
++ */
++
++#ifndef AVUTIL_HWCONTEXT_VAAPI_H
++#define AVUTIL_HWCONTEXT_VAAPI_H
++
++#include <va/va.h>
++
++/**
++ * @file
++ * API-specific header for AV_HWDEVICE_TYPE_VAAPI.
++ *
++ * Dynamic frame pools are supported, but note that any pool used as a render
++ * target is required to be of fixed size in order to be be usable as an
++ * argument to vaCreateContext().
++ *
++ * For user-allocated pools, AVHWFramesContext.pool must return AVBufferRefs
++ * with the data pointer set to a VASurfaceID.
++ */
++
++enum {
++ /**
++ * The quirks field has been set by the user and should not be detected
++ * automatically by av_hwdevice_ctx_init().
++ */
++ AV_VAAPI_DRIVER_QUIRK_USER_SET = (1 << 0),
++ /**
++ * The driver does not destroy parameter buffers when they are used by
++ * vaRenderPicture(). Additional code will be required to destroy them
++ * separately afterwards.
++ */
++ AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS = (1 << 1),
++
++ /**
++ * The driver does not support the VASurfaceAttribMemoryType attribute,
++ * so the surface allocation code will not try to use it.
++ */
++ AV_VAAPI_DRIVER_QUIRK_ATTRIB_MEMTYPE = (1 << 2),
++
++ /**
++ * The driver does not support surface attributes at all.
++ * The surface allocation code will never pass them to surface allocation,
++ * and the results of the vaQuerySurfaceAttributes() call will be faked.
++ */
++ AV_VAAPI_DRIVER_QUIRK_SURFACE_ATTRIBUTES = (1 << 3),
++};
++
++/**
++ * VAAPI connection details.
++ *
++ * Allocated as AVHWDeviceContext.hwctx
++ */
++typedef struct AVVAAPIDeviceContext {
++ /**
++ * The VADisplay handle, to be filled by the user.
++ */
++ VADisplay display;
++ /**
++ * Driver quirks to apply - this is filled by av_hwdevice_ctx_init(),
++ * with reference to a table of known drivers, unless the
++ * AV_VAAPI_DRIVER_QUIRK_USER_SET bit is already present. The user
++ * may need to refer to this field when performing any later
++ * operations using VAAPI with the same VADisplay.
++ */
++ unsigned int driver_quirks;
++} AVVAAPIDeviceContext;
++
++/**
++ * VAAPI-specific data associated with a frame pool.
++ *
++ * Allocated as AVHWFramesContext.hwctx.
++ */
++typedef struct AVVAAPIFramesContext {
++ /**
++ * Set by the user to apply surface attributes to all surfaces in
++ * the frame pool. If null, default settings are used.
++ */
++ VASurfaceAttrib *attributes;
++ int nb_attributes;
++ /**
++ * The surfaces IDs of all surfaces in the pool after creation.
++ * Only valid if AVHWFramesContext.initial_pool_size was positive.
++ * These are intended to be used as the render_targets arguments to
++ * vaCreateContext().
++ */
++ VASurfaceID *surface_ids;
++ int nb_surfaces;
++} AVVAAPIFramesContext;
++
++/**
++ * VAAPI hardware pipeline configuration details.
++ *
++ * Allocated with av_hwdevice_hwconfig_alloc().
++ */
++typedef struct AVVAAPIHWConfig {
++ /**
++ * ID of a VAAPI pipeline configuration.
++ */
++ VAConfigID config_id;
++} AVVAAPIHWConfig;
++
++#endif /* AVUTIL_HWCONTEXT_VAAPI_H */
+diff -up firefox-84.0/media/ffvpx/libavutil/moz.build.ffvpx firefox-84.0/media/ffvpx/libavutil/moz.build
+--- firefox-84.0/media/ffvpx/libavutil/moz.build.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/libavutil/moz.build 2020-12-10 17:03:31.733266237 +0100
+@@ -45,6 +45,11 @@ SOURCES += [
+ 'time.c',
+ 'utils.c'
+ ]
++if CONFIG['MOZ_WAYLAND']:
++ SOURCES += [
++ 'hwcontext_vaapi.c',
++ ]
++ USE_LIBS += ['mozva']
+
+ if not CONFIG['MOZ_FFVPX_AUDIOONLY']:
+ SOURCES += [
+diff -up firefox-84.0/media/ffvpx/moz.build.ffvpx firefox-84.0/media/ffvpx/moz.build
+--- firefox-84.0/media/ffvpx/moz.build.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/moz.build 2020-12-10 17:03:31.733266237 +0100
+@@ -11,3 +11,8 @@ DIRS += [
+ 'libavutil',
+ 'libavcodec'
+ ]
++
++if CONFIG['MOZ_WAYLAND']:
++ DIRS += [
++ 'mozva',
++ ]
+diff -up firefox-84.0/media/ffvpx/mozva/moz.build.ffvpx firefox-84.0/media/ffvpx/mozva/moz.build
+--- firefox-84.0/media/ffvpx/mozva/moz.build.ffvpx 2020-12-10 17:06:25.599272289 +0100
++++ firefox-84.0/media/ffvpx/mozva/moz.build 2020-12-10 17:07:19.630827998 +0100
+@@ -0,0 +1,13 @@
++# -*- Mode: python; indent-tabs-mode: nil; tab-width: 40 -*-
++# vim: set filetype=python:
++# This Source Code Form is subject to the terms of the Mozilla Public
++# License, v. 2.0. If a copy of the MPL was not distributed with this
++# file, You can obtain one at http://mozilla.org/MPL/2.0/.
++
++SOURCES += [
++ 'mozva.c',
++]
++
++LOCAL_INCLUDES += ['/media/ffvpx']
++
++Library('mozva')
+diff -up firefox-84.0/media/ffvpx/mozva/mozva.c.ffvpx firefox-84.0/media/ffvpx/mozva/mozva.c
+--- firefox-84.0/media/ffvpx/mozva/mozva.c.ffvpx 2020-12-10 17:05:06.119983875 +0100
++++ firefox-84.0/media/ffvpx/mozva/mozva.c 2020-12-10 17:05:06.119983875 +0100
+@@ -0,0 +1,406 @@
++/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
++/* vim:expandtab:shiftwidth=4:tabstop=4:
++ */
++/* This Source Code Form is subject to the terms of the Mozilla Public
++ * License, v. 2.0. If a copy of the MPL was not distributed with this
++ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
++
++#pragma GCC visibility push(default)
++#include <va/va.h>
++#pragma GCC visibility pop
++
++#include "mozilla/Types.h"
++#include <dlfcn.h>
++#include <pthread.h>
++#include <stdlib.h>
++
++#define GET_FUNC(func, lib) (func##Fn = dlsym(lib, #func))
++
++#define IS_FUNC_LOADED(func) (func##Fn != NULL)
++
++static VAStatus (*vaDestroyBufferFn)(VADisplay dpy, VABufferID buffer_id);
++static VAStatus (*vaBeginPictureFn)(VADisplay dpy, VAContextID context,
++ VASurfaceID render_target);
++static VAStatus (*vaEndPictureFn)(VADisplay dpy, VAContextID context);
++static VAStatus (*vaRenderPictureFn)(VADisplay dpy, VAContextID context,
++ VABufferID* buffers, int num_buffers);
++static int (*vaMaxNumProfilesFn)(VADisplay dpy);
++static VAStatus (*vaCreateContextFn)(VADisplay dpy, VAConfigID config_id,
++ int picture_width, int picture_height,
++ int flag, VASurfaceID* render_targets,
++ int num_render_targets,
++ VAContextID* context /* out */);
++static VAStatus (*vaDestroyContextFn)(VADisplay dpy, VAContextID context);
++static VAStatus (*vaCreateBufferFn)(VADisplay dpy, VAContextID context,
++ VABufferType type, /* in */
++ unsigned int size, /* in */
++ unsigned int num_elements, /* in */
++ void* data, /* in */
++ VABufferID* buf_id /* out */);
++static VAStatus (*vaQuerySurfaceAttributesFn)(VADisplay dpy, VAConfigID config,
++ VASurfaceAttrib* attrib_list,
++ unsigned int* num_attribs);
++static VAStatus (*vaQueryConfigProfilesFn)(VADisplay dpy,
++ VAProfile* profile_list, /* out */
++ int* num_profiles /* out */);
++static const char* (*vaErrorStrFn)(VAStatus error_status);
++static VAStatus (*vaCreateConfigFn)(VADisplay dpy, VAProfile profile,
++ VAEntrypoint entrypoint,
++ VAConfigAttrib* attrib_list,
++ int num_attribs,
++ VAConfigID* config_id /* out */);
++static VAStatus (*vaDestroyConfigFn)(VADisplay dpy, VAConfigID config_id);
++static int (*vaMaxNumImageFormatsFn)(VADisplay dpy);
++static VAStatus (*vaQueryImageFormatsFn)(VADisplay dpy,
++ VAImageFormat* format_list, /* out */
++ int* num_formats /* out */);
++static const char* (*vaQueryVendorStringFn)(VADisplay dpy);
++static VAStatus (*vaDestroySurfacesFn)(VADisplay dpy, VASurfaceID* surfaces,
++ int num_surfaces);
++static VAStatus (*vaCreateSurfacesFn)(VADisplay dpy, unsigned int format,
++ unsigned int width, unsigned int height,
++ VASurfaceID* surfaces,
++ unsigned int num_surfaces,
++ VASurfaceAttrib* attrib_list,
++ unsigned int num_attribs);
++static VAStatus (*vaDeriveImageFn)(VADisplay dpy, VASurfaceID surface,
++ VAImage* image /* out */);
++static VAStatus (*vaDestroyImageFn)(VADisplay dpy, VAImageID image);
++static VAStatus (*vaPutImageFn)(VADisplay dpy, VASurfaceID surface,
++ VAImageID image, int src_x, int src_y,
++ unsigned int src_width, unsigned int src_height,
++ int dest_x, int dest_y, unsigned int dest_width,
++ unsigned int dest_height);
++static VAStatus (*vaSyncSurfaceFn)(VADisplay dpy, VASurfaceID render_target);
++static VAStatus (*vaCreateImageFn)(VADisplay dpy, VAImageFormat* format,
++ int width, int height,
++ VAImage* image /* out */);
++static VAStatus (*vaGetImageFn)(
++ VADisplay dpy, VASurfaceID surface,
++ int x, /* coordinates of the upper left source pixel */
++ int y, unsigned int width, /* width and height of the region */
++ unsigned int height, VAImageID image);
++static VAStatus (*vaMapBufferFn)(VADisplay dpy, VABufferID buf_id, /* in */
++ void** pbuf /* out */);
++static VAStatus (*vaUnmapBufferFn)(VADisplay dpy, VABufferID buf_id /* in */);
++static VAStatus (*vaTerminateFn)(VADisplay dpy);
++static VAStatus (*vaInitializeFn)(VADisplay dpy, int* major_version, /* out */
++ int* minor_version /* out */);
++static VAStatus (*vaSetDriverNameFn)(VADisplay dpy, char* driver_name);
++
++int LoadVALibrary() {
++ static pthread_mutex_t sVALock = PTHREAD_MUTEX_INITIALIZER;
++ static void* sVALib = NULL;
++ static int sVAInitialized = 0;
++ static int sVALoaded = 0;
++
++ pthread_mutex_lock(&sVALock);
++
++ if (!sVAInitialized) {
++ sVAInitialized = 1;
++ sVALib = dlopen("libva.so.2", RTLD_LAZY);
++ if (!sVALib) {
++ pthread_mutex_unlock(&sVALock);
++ return 0;
++ }
++ GET_FUNC(vaDestroyBuffer, sVALib);
++ GET_FUNC(vaBeginPicture, sVALib);
++ GET_FUNC(vaEndPicture, sVALib);
++ GET_FUNC(vaRenderPicture, sVALib);
++ GET_FUNC(vaMaxNumProfiles, sVALib);
++ GET_FUNC(vaCreateContext, sVALib);
++ GET_FUNC(vaDestroyContext, sVALib);
++ GET_FUNC(vaCreateBuffer, sVALib);
++ GET_FUNC(vaQuerySurfaceAttributes, sVALib);
++ GET_FUNC(vaQueryConfigProfiles, sVALib);
++ GET_FUNC(vaErrorStr, sVALib);
++ GET_FUNC(vaCreateConfig, sVALib);
++ GET_FUNC(vaDestroyConfig, sVALib);
++ GET_FUNC(vaMaxNumImageFormats, sVALib);
++ GET_FUNC(vaQueryImageFormats, sVALib);
++ GET_FUNC(vaQueryVendorString, sVALib);
++ GET_FUNC(vaDestroySurfaces, sVALib);
++ GET_FUNC(vaCreateSurfaces, sVALib);
++ GET_FUNC(vaDeriveImage, sVALib);
++ GET_FUNC(vaDestroyImage, sVALib);
++ GET_FUNC(vaPutImage, sVALib);
++ GET_FUNC(vaSyncSurface, sVALib);
++ GET_FUNC(vaCreateImage, sVALib);
++ GET_FUNC(vaGetImage, sVALib);
++ GET_FUNC(vaMapBuffer, sVALib);
++ GET_FUNC(vaUnmapBuffer, sVALib);
++ GET_FUNC(vaTerminate, sVALib);
++ GET_FUNC(vaInitialize, sVALib);
++ GET_FUNC(vaSetDriverName, sVALib);
++
++ sVALoaded =
++ (IS_FUNC_LOADED(vaDestroyBuffer) && IS_FUNC_LOADED(vaBeginPicture) &&
++ IS_FUNC_LOADED(vaEndPicture) && IS_FUNC_LOADED(vaRenderPicture) &&
++ IS_FUNC_LOADED(vaMaxNumProfiles) && IS_FUNC_LOADED(vaCreateContext) &&
++ IS_FUNC_LOADED(vaDestroyContext) && IS_FUNC_LOADED(vaCreateBuffer) &&
++ IS_FUNC_LOADED(vaQuerySurfaceAttributes) &&
++ IS_FUNC_LOADED(vaQueryConfigProfiles) && IS_FUNC_LOADED(vaErrorStr) &&
++ IS_FUNC_LOADED(vaCreateConfig) && IS_FUNC_LOADED(vaDestroyConfig) &&
++ IS_FUNC_LOADED(vaMaxNumImageFormats) &&
++ IS_FUNC_LOADED(vaQueryImageFormats) &&
++ IS_FUNC_LOADED(vaQueryVendorString) &&
++ IS_FUNC_LOADED(vaDestroySurfaces) &&
++ IS_FUNC_LOADED(vaCreateSurfaces) && IS_FUNC_LOADED(vaDeriveImage) &&
++ IS_FUNC_LOADED(vaDestroyImage) && IS_FUNC_LOADED(vaPutImage) &&
++ IS_FUNC_LOADED(vaSyncSurface) && IS_FUNC_LOADED(vaCreateImage) &&
++ IS_FUNC_LOADED(vaGetImage) && IS_FUNC_LOADED(vaMapBuffer) &&
++ IS_FUNC_LOADED(vaUnmapBuffer) && IS_FUNC_LOADED(vaTerminate) &&
++ IS_FUNC_LOADED(vaInitialize) && IS_FUNC_LOADED(vaSetDriverName));
++ }
++ pthread_mutex_unlock(&sVALock);
++ return sVALoaded;
++}
++
++#pragma GCC visibility push(default)
++
++VAStatus vaDestroyBuffer(VADisplay dpy, VABufferID buffer_id) {
++ if (LoadVALibrary()) {
++ return vaDestroyBufferFn(dpy, buffer_id);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaBeginPicture(VADisplay dpy, VAContextID context,
++ VASurfaceID render_target) {
++ if (LoadVALibrary()) {
++ return vaBeginPictureFn(dpy, context, render_target);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaEndPicture(VADisplay dpy, VAContextID context) {
++ if (LoadVALibrary()) {
++ return vaEndPictureFn(dpy, context);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaRenderPicture(VADisplay dpy, VAContextID context,
++ VABufferID* buffers, int num_buffers) {
++ if (LoadVALibrary()) {
++ return vaRenderPictureFn(dpy, context, buffers, num_buffers);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++int vaMaxNumProfiles(VADisplay dpy) {
++ if (LoadVALibrary()) {
++ return vaMaxNumProfilesFn(dpy);
++ }
++ return 0;
++}
++
++VAStatus vaCreateContext(VADisplay dpy, VAConfigID config_id, int picture_width,
++ int picture_height, int flag,
++ VASurfaceID* render_targets, int num_render_targets,
++ VAContextID* context /* out */) {
++ if (LoadVALibrary()) {
++ return vaCreateContextFn(dpy, config_id, picture_width, picture_height,
++ flag, render_targets, num_render_targets, context);
++ }
++ *context = 0;
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaDestroyContext(VADisplay dpy, VAContextID context) {
++ if (LoadVALibrary()) {
++ return vaDestroyContextFn(dpy, context);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaCreateBuffer(VADisplay dpy, VAContextID context,
++ VABufferType type, /* in */
++ unsigned int size, /* in */
++ unsigned int num_elements, /* in */
++ void* data, /* in */
++ VABufferID* buf_id /* out */) {
++ if (LoadVALibrary()) {
++ return vaCreateBufferFn(dpy, context, type, size, num_elements, data,
++ buf_id);
++ }
++ *buf_id = 0;
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaQuerySurfaceAttributes(VADisplay dpy, VAConfigID config,
++ VASurfaceAttrib* attrib_list,
++ unsigned int* num_attribs) {
++ if (LoadVALibrary()) {
++ return vaQuerySurfaceAttributesFn(dpy, config, attrib_list, num_attribs);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaQueryConfigProfiles(VADisplay dpy, VAProfile* profile_list, /* out */
++ int* num_profiles /* out */) {
++ if (LoadVALibrary()) {
++ return vaQueryConfigProfilesFn(dpy, profile_list, num_profiles);
++ }
++ *num_profiles = 0;
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++const char* vaErrorStr(VAStatus error_status) {
++ if (LoadVALibrary()) {
++ return vaErrorStrFn(error_status);
++ }
++ static char tmp[] = "Unimplemented";
++ return tmp;
++}
++
++VAStatus vaCreateConfig(VADisplay dpy, VAProfile profile,
++ VAEntrypoint entrypoint, VAConfigAttrib* attrib_list,
++ int num_attribs, VAConfigID* config_id /* out */) {
++ if (LoadVALibrary()) {
++ return vaCreateConfigFn(dpy, profile, entrypoint, attrib_list, num_attribs,
++ config_id);
++ }
++ *config_id = 0;
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaDestroyConfig(VADisplay dpy, VAConfigID config_id) {
++ if (LoadVALibrary()) {
++ return vaDestroyConfigFn(dpy, config_id);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++int vaMaxNumImageFormats(VADisplay dpy) {
++ if (LoadVALibrary()) {
++ return vaMaxNumImageFormatsFn(dpy);
++ }
++ return 0;
++}
++
++VAStatus vaQueryImageFormats(VADisplay dpy, VAImageFormat* format_list,
++ int* num_formats) {
++ if (LoadVALibrary()) {
++ return vaQueryImageFormatsFn(dpy, format_list, num_formats);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++const char* vaQueryVendorString(VADisplay dpy) {
++ if (LoadVALibrary()) {
++ return vaQueryVendorStringFn(dpy);
++ }
++ return NULL;
++}
++
++VAStatus vaDestroySurfaces(VADisplay dpy, VASurfaceID* surfaces,
++ int num_surfaces) {
++ if (LoadVALibrary()) {
++ return vaDestroySurfacesFn(dpy, surfaces, num_surfaces);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaCreateSurfaces(VADisplay dpy, unsigned int format,
++ unsigned int width, unsigned int height,
++ VASurfaceID* surfaces, unsigned int num_surfaces,
++ VASurfaceAttrib* attrib_list,
++ unsigned int num_attribs) {
++ if (LoadVALibrary()) {
++ return vaCreateSurfacesFn(dpy, format, width, height, surfaces,
++ num_surfaces, attrib_list, num_attribs);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaDeriveImage(VADisplay dpy, VASurfaceID surface,
++ VAImage* image /* out */) {
++ if (LoadVALibrary()) {
++ return vaDeriveImageFn(dpy, surface, image);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaDestroyImage(VADisplay dpy, VAImageID image) {
++ if (LoadVALibrary()) {
++ return vaDestroyImageFn(dpy, image);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaPutImage(VADisplay dpy, VASurfaceID surface, VAImageID image,
++ int src_x, int src_y, unsigned int src_width,
++ unsigned int src_height, int dest_x, int dest_y,
++ unsigned int dest_width, unsigned int dest_height) {
++ if (LoadVALibrary()) {
++ return vaPutImageFn(dpy, surface, image, src_x, src_y, src_width,
++ src_height, dest_x, dest_y, dest_width, dest_height);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaSyncSurface(VADisplay dpy, VASurfaceID render_target) {
++ if (LoadVALibrary()) {
++ return vaSyncSurfaceFn(dpy, render_target);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaCreateImage(VADisplay dpy, VAImageFormat* format, int width,
++ int height, VAImage* image /* out */) {
++ if (LoadVALibrary()) {
++ return vaCreateImageFn(dpy, format, width, height, image);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaGetImage(VADisplay dpy, VASurfaceID surface,
++ int x, /* coordinates of the upper left source pixel */
++ int y,
++ unsigned int width, /* width and height of the region */
++ unsigned int height, VAImageID image) {
++ if (LoadVALibrary()) {
++ return vaGetImageFn(dpy, surface, x, y, width, height, image);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaMapBuffer(VADisplay dpy, VABufferID buf_id, /* in */
++ void** pbuf /* out */) {
++ if (LoadVALibrary()) {
++ return vaMapBufferFn(dpy, buf_id, pbuf);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaUnmapBuffer(VADisplay dpy, VABufferID buf_id /* in */) {
++ if (LoadVALibrary()) {
++ return vaUnmapBufferFn(dpy, buf_id);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaTerminate(VADisplay dpy) {
++ if (LoadVALibrary()) {
++ return vaTerminateFn(dpy);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaInitialize(VADisplay dpy, int* major_version, /* out */
++ int* minor_version /* out */) {
++ if (LoadVALibrary()) {
++ return vaInitializeFn(dpy, major_version, minor_version);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++VAStatus vaSetDriverName(VADisplay dpy, char* driver_name) {
++ if (LoadVALibrary()) {
++ return vaSetDriverNameFn(dpy, driver_name);
++ }
++ return VA_STATUS_ERROR_UNIMPLEMENTED;
++}
++
++#pragma GCC visibility pop
+diff -up firefox-84.0/media/ffvpx/README_MOZILLA.ffvpx firefox-84.0/media/ffvpx/README_MOZILLA
+--- firefox-84.0/media/ffvpx/README_MOZILLA.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/README_MOZILLA 2020-12-10 17:05:06.119983875 +0100
+@@ -56,3 +56,5 @@ $ for i in `cat $PATH_CENTRAL/media/ffvp
+ Then apply patch.diff on the ffvpx tree.
+
+ Compilation will reveal if any files are missing.
++
++Apply linux-vaapi-build.patch patch to enable build VA-API support for Linux.
+diff -up firefox-84.0/media/ffvpx/va/README.ffvpx firefox-84.0/media/ffvpx/va/README
+--- firefox-84.0/media/ffvpx/va/README.ffvpx 2020-12-10 17:05:06.119983875 +0100
++++ firefox-84.0/media/ffvpx/va/README 2020-12-10 17:05:06.119983875 +0100
+@@ -0,0 +1,2 @@
++There are libva headers from libva 1.7.0 used to build vaapi support for in-tree ffvpx.
++Apply va.patch when you update it to new versions.
+\ No newline at end of file
+diff -up firefox-84.0/media/ffvpx/va/va_dec_vp8.h.ffvpx firefox-84.0/media/ffvpx/va/va_dec_vp8.h
+--- firefox-84.0/media/ffvpx/va/va_dec_vp8.h.ffvpx 2020-12-10 17:05:06.119983875 +0100
++++ firefox-84.0/media/ffvpx/va/va_dec_vp8.h 2020-12-10 17:05:06.119983875 +0100
+@@ -0,0 +1,254 @@
++/*
++ * Copyright (c) 2007-2012 Intel Corporation. All Rights Reserved.
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a
++ * copy of this software and associated documentation files (the
++ * "Software"), to deal in the Software without restriction, including
++ * without limitation the rights to use, copy, modify, merge, publish,
++ * distribute, sub license, and/or sell copies of the Software, and to
++ * permit persons to whom the Software is furnished to do so, subject to
++ * the following conditions:
++ *
++ * The above copyright notice and this permission notice (including the
++ * next paragraph) shall be included in all copies or substantial portions
++ * of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
++ * IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE LIABLE FOR
++ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/**
++ * \file va_dec_vp.h
++ * \brief VP8 decoding API
++ *
++ * This file contains the \ref api_dec_vp8 "VP8 decoding API".
++ */
++
++#ifndef VA_DEC_VP8_H
++#define VA_DEC_VP8_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/**
++ * \defgroup api_dec_vp8 VP8 decoding API
++ *
++ * @{
++ */
++
++/**
++ * \brief VPX Bool Coder Context structure
++ *
++ * This common structure is defined for potential sharing by other VP formats
++ *
++ */
++typedef struct _VABoolCoderContextVPX
++{
++ /* partition 0 "range" */
++ uint8_t range;
++ /* partition 0 "value" */
++ uint8_t value;
++ /*
++ * 'partition 0 number of shifts before an output byte is available'
++ * it is the number of remaining bits in 'value' for decoding, range [0, 7].
++ */
++
++ uint8_t count;
++} VABoolCoderContextVPX;
++
++/**
++ * \brief VP8 Decoding Picture Parameter Buffer Structure
++ *
++ * This structure conveys frame level parameters and should be sent once
++ * per frame.
++ *
++ */
++typedef struct _VAPictureParameterBufferVP8
++{
++ /* frame width in pixels */
++ uint32_t frame_width;
++ /* frame height in pixels */
++ uint32_t frame_height;
++
++ /* specifies the "last" reference frame */
++ VASurfaceID last_ref_frame;
++ /* specifies the "golden" reference frame */
++ VASurfaceID golden_ref_frame;
++ /* specifies the "alternate" referrence frame */
++ VASurfaceID alt_ref_frame;
++ /* specifies the out-of-loop deblocked frame, not used currently */
++ VASurfaceID out_of_loop_frame;
++
++ union {
++ struct {
++ /* same as key_frame in bitstream syntax, 0 means a key frame */
++ uint32_t key_frame : 1;
++ /* same as version in bitstream syntax */
++ uint32_t version : 3;
++ /* same as segmentation_enabled in bitstream syntax */
++ uint32_t segmentation_enabled : 1;
++ /* same as update_mb_segmentation_map in bitstream syntax */
++ uint32_t update_mb_segmentation_map : 1;
++ /* same as update_segment_feature_data in bitstream syntax */
++ uint32_t update_segment_feature_data : 1;
++ /* same as filter_type in bitstream syntax */
++ uint32_t filter_type : 1;
++ /* same as sharpness_level in bitstream syntax */
++ uint32_t sharpness_level : 3;
++ /* same as loop_filter_adj_enable in bitstream syntax */
++ uint32_t loop_filter_adj_enable : 1;
++ /* same as mode_ref_lf_delta_update in bitstream syntax */
++ uint32_t mode_ref_lf_delta_update : 1;
++ /* same as sign_bias_golden in bitstream syntax */
++ uint32_t sign_bias_golden : 1;
++ /* same as sign_bias_alternate in bitstream syntax */
++ uint32_t sign_bias_alternate : 1;
++ /* same as mb_no_coeff_skip in bitstream syntax */
++ uint32_t mb_no_coeff_skip : 1;
++ /* flag to indicate that loop filter should be disabled */
++ uint32_t loop_filter_disable : 1;
++ } bits;
++ uint32_t value;
++ } pic_fields;
++
++ /*
++ * probabilities of the segment_id decoding tree and same as
++ * mb_segment_tree_probs in the spec.
++ */
++ uint8_t mb_segment_tree_probs[3];
++
++ /* Post-adjustment loop filter levels for the 4 segments */
++ uint8_t loop_filter_level[4];
++ /* loop filter deltas for reference frame based MB level adjustment */
++ int8_t loop_filter_deltas_ref_frame[4];
++ /* loop filter deltas for coding mode based MB level adjustment */
++ int8_t loop_filter_deltas_mode[4];
++
++ /* same as prob_skip_false in bitstream syntax */
++ uint8_t prob_skip_false;
++ /* same as prob_intra in bitstream syntax */
++ uint8_t prob_intra;
++ /* same as prob_last in bitstream syntax */
++ uint8_t prob_last;
++ /* same as prob_gf in bitstream syntax */
++ uint8_t prob_gf;
++
++ /*
++ * list of 4 probabilities of the luma intra prediction mode decoding
++ * tree and same as y_mode_probs in frame header
++ */
++ uint8_t y_mode_probs[4];
++ /*
++ * list of 3 probabilities of the chroma intra prediction mode decoding
++ * tree and same as uv_mode_probs in frame header
++ */
++ uint8_t uv_mode_probs[3];
++ /*
++ * updated mv decoding probabilities and same as mv_probs in
++ * frame header
++ */
++ uint8_t mv_probs[2][19];
++
++ VABoolCoderContextVPX bool_coder_ctx;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAPictureParameterBufferVP8;
++
++/**
++ * \brief VP8 Slice Parameter Buffer Structure
++ *
++ * This structure conveys parameters related to data partitions and should be
++ * sent once per frame. Slice data buffer of VASliceDataBufferType is used
++ * to send the partition data.
++ *
++ */
++typedef struct _VASliceParameterBufferVP8
++{
++ /*
++ * number of bytes in the slice data buffer for the partitions
++ */
++ uint32_t slice_data_size;
++ /*
++ * offset to the first byte of partition data (control partition)
++ */
++ uint32_t slice_data_offset;
++ /*
++ * see VA_SLICE_DATA_FLAG_XXX definitions
++ */
++ uint32_t slice_data_flag;
++ /*
++ * offset to the first bit of MB from the first byte of partition data(slice_data_offset)
++ */
++ uint32_t macroblock_offset;
++
++ /*
++ * Partitions
++ * (1<<log2_nbr_of_dct_partitions)+1, count both control partition (frame header) and toke partition
++ */
++ uint8_t num_of_partitions;
++ /*
++ * partition_size[0] is remaining bytes of control partition after parsed by application.
++ * exclude current byte for the remaining bits in bool_coder_ctx.
++ * exclude the uncompress data chunk since first_part_size 'excluding the uncompressed data chunk'
++ */
++ uint32_t partition_size[9];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VASliceParameterBufferVP8;
++
++/**
++ * \brief VP8 Coefficient Probability Data Buffer Structure
++ *
++ * Contains the contents of the token probability table, which may be
++ * incrementally modified in the frame header. There are four dimensions to
++ * the token probability array. The outermost dimension is indexed by the
++ * type of plane being decoded; the next dimension is selected by the
++ * position of the coefficient being decoded; the third dimension, * roughly
++ * speaking, measures the "local complexity" or extent to which nearby
++ * coefficients are non-zero; the fourth, and final, dimension of the token
++ * probability array is indexed by the position in the token tree structure,
++ * as are all tree probability arrays. This structure is sent once per frame.
++ *
++ */
++typedef struct _VAProbabilityDataBufferVP8
++{
++ uint8_t dct_coeff_probs[4][8][3][11];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAProbabilityDataBufferVP8;
++
++/**
++ * \brief VP8 Inverse Quantization Matrix Buffer Structure
++ *
++ * Contains quantization indices for yac(0),ydc(1),y2dc(2),y2ac(3),uvdc(4),
++ * uvac(5) for each segment (0-3). When segmentation is disabled, only
++ * quantization_index[0][] will be used. This structure is sent once per frame.
++ */
++typedef struct _VAIQMatrixBufferVP8
++{
++ /*
++ * array first dimensional is segment and 2nd dimensional is Q index
++ * all Q indexs should be clipped to be range [0, 127]
++ */
++ uint16_t quantization_index[4][6];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAIQMatrixBufferVP8;
++
++/**@}*/
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* VA_DEC_VP8_H */
+diff -up firefox-84.0/media/ffvpx/va/va_dec_vp9.h.ffvpx firefox-84.0/media/ffvpx/va/va_dec_vp9.h
+--- firefox-84.0/media/ffvpx/va/va_dec_vp9.h.ffvpx 2020-12-10 17:05:06.119983875 +0100
++++ firefox-84.0/media/ffvpx/va/va_dec_vp9.h 2020-12-10 17:05:06.119983875 +0100
+@@ -0,0 +1,319 @@
++/*
++ * Copyright (c) 2014 Intel Corporation. All Rights Reserved.
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a
++ * copy of this software and associated documentation files (the
++ * "Software"), to deal in the Software without restriction, including
++ * without limitation the rights to use, copy, modify, merge, publish,
++ * distribute, sub license, and/or sell copies of the Software, and to
++ * permit persons to whom the Software is furnished to do so, subject to
++ * the following conditions:
++ *
++ * The above copyright notice and this permission notice (including the
++ * next paragraph) shall be included in all copies or substantial portions
++ * of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
++ * IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE LIABLE FOR
++ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/**
++ * \file va_dec_vp9.h
++ * \brief The VP9 decoding API
++ *
++ * This file contains the \ref api_dec_vp9 "VP9 decoding API".
++ */
++
++#ifndef VA_DEC_VP9_H
++#define VA_DEC_VP9_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/**
++ * \defgroup api_dec_vp9 VP9 decoding API
++ *
++ * This VP9 decoding API supports 8-bit 420 format only.
++ *
++ * @{
++ */
++
++
++
++
++/**
++ * \brief VP9 Decoding Picture Parameter Buffer Structure
++ *
++ * This structure conveys picture level parameters.
++ * App should send a surface with this data structure down to VAAPI once
++ * per frame.
++ *
++ */
++typedef struct _VADecPictureParameterBufferVP9
++{
++ /** \brief picture width
++ * Picture original resolution. The value may not be multiple of 8.
++ */
++ uint16_t frame_width;
++ /** \brief picture height
++ * Picture original resolution. The value may not be multiple of 8.
++ */
++ uint16_t frame_height;
++
++ /** \brief Surface indices of reference frames in DPB.
++ *
++ * Each entry of the list specifies the surface index of the picture
++ * that is referred by current picture or will be referred by any future
++ * picture.
++ * Application who calls this API should update this list based on the
++ * refreshing information from VP9 bitstream.
++ */
++ VASurfaceID reference_frames[8];
++
++ union
++ {
++ struct
++ {
++ /** \brief flags for current picture
++ * same syntax and semantic as those in VP9 code
++ */
++ uint32_t subsampling_x : 1;
++ uint32_t subsampling_y : 1;
++ uint32_t frame_type : 1;
++ uint32_t show_frame : 1;
++ uint32_t error_resilient_mode : 1;
++ uint32_t intra_only : 1;
++ uint32_t allow_high_precision_mv : 1;
++ uint32_t mcomp_filter_type : 3;
++ uint32_t frame_parallel_decoding_mode : 1;
++ uint32_t reset_frame_context : 2;
++ uint32_t refresh_frame_context : 1;
++ uint32_t frame_context_idx : 2;
++ uint32_t segmentation_enabled : 1;
++
++ /** \brief corresponds to variable temporal_update in VP9 code.
++ */
++ uint32_t segmentation_temporal_update : 1;
++ /** \brief corresponds to variable update_mb_segmentation_map
++ * in VP9 code.
++ */
++ uint32_t segmentation_update_map : 1;
++
++ /** \brief Index of reference_frames[] and points to the
++ * LAST reference frame.
++ * It corresponds to active_ref_idx[0] in VP9 code.
++ */
++ uint32_t last_ref_frame : 3;
++ /** \brief Sign Bias of the LAST reference frame.
++ * It corresponds to ref_frame_sign_bias[LAST_FRAME] in VP9 code.
++ */
++ uint32_t last_ref_frame_sign_bias : 1;
++ /** \brief Index of reference_frames[] and points to the
++ * GOLDERN reference frame.
++ * It corresponds to active_ref_idx[1] in VP9 code.
++ */
++ uint32_t golden_ref_frame : 3;
++ /** \brief Sign Bias of the GOLDERN reference frame.
++ * Corresponds to ref_frame_sign_bias[GOLDERN_FRAME] in VP9 code.
++ */
++ uint32_t golden_ref_frame_sign_bias : 1;
++ /** \brief Index of reference_frames[] and points to the
++ * ALTERNATE reference frame.
++ * Corresponds to active_ref_idx[2] in VP9 code.
++ */
++ uint32_t alt_ref_frame : 3;
++ /** \brief Sign Bias of the ALTERNATE reference frame.
++ * Corresponds to ref_frame_sign_bias[ALTREF_FRAME] in VP9 code.
++ */
++ uint32_t alt_ref_frame_sign_bias : 1;
++ /** \brief Lossless Mode
++ * LosslessFlag = base_qindex == 0 &&
++ * y_dc_delta_q == 0 &&
++ * uv_dc_delta_q == 0 &&
++ * uv_ac_delta_q == 0;
++ * Where base_qindex, y_dc_delta_q, uv_dc_delta_q and uv_ac_delta_q
++ * are all variables in VP9 code.
++ */
++ uint32_t lossless_flag : 1;
++ } bits;
++ uint32_t value;
++ } pic_fields;
++
++ /* following parameters have same syntax with those in VP9 code */
++ uint8_t filter_level;
++ uint8_t sharpness_level;
++
++ /** \brief number of tile rows specified by (1 << log2_tile_rows).
++ * It corresponds the variable with same name in VP9 code.
++ */
++ uint8_t log2_tile_rows;
++ /** \brief number of tile columns specified by (1 << log2_tile_columns).
++ * It corresponds the variable with same name in VP9 code.
++ */
++ uint8_t log2_tile_columns;
++ /** \brief Number of bytes taken up by the uncompressed frame header,
++ * which corresponds to byte length of function
++ * read_uncompressed_header() in VP9 code.
++ * Specifically, it is the byte count from bit stream buffer start to
++ * the last byte of uncompressed frame header.
++ * If there are other meta data in the buffer before uncompressed header,
++ * its size should be also included here.
++ */
++ uint8_t frame_header_length_in_bytes;
++
++ /** \brief The byte count of compressed header the bitstream buffer,
++ * which corresponds to syntax first_partition_size in code.
++ */
++ uint16_t first_partition_size;
++
++ /** These values are segment probabilities with same names in VP9
++ * function setup_segmentation(). They should be parsed directly from
++ * bitstream by application.
++ */
++ uint8_t mb_segment_tree_probs[7];
++ uint8_t segment_pred_probs[3];
++
++ /** \brief VP9 Profile definition
++ * value range [0..3].
++ */
++ uint8_t profile;
++
++ /** \brief VP9 bit depth per sample
++ * same for both luma and chroma samples.
++ */
++ uint8_t bit_depth;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_MEDIUM];
++
++} VADecPictureParameterBufferVP9;
++
++
++
++/**
++ * \brief VP9 Segmentation Parameter Data Structure
++ *
++ * This structure conveys per segment parameters.
++ * 8 of this data structure will be included in VASegmentationParameterBufferVP9
++ * and sent to API in a single buffer.
++ *
++ */
++typedef struct _VASegmentParameterVP9
++{
++ union
++ {
++ struct
++ {
++ /** \brief Indicates if per segment reference frame indicator
++ * is enabled.
++ * Corresponding to variable feature_enabled when
++ * j == SEG_LVL_REF_FRAME in function setup_segmentation() VP9 code.
++ */
++ uint16_t segment_reference_enabled : 1;
++ /** \brief Specifies per segment reference indication.
++ * 0: reserved
++ * 1: Last ref
++ * 2: golden
++ * 3: altref
++ * Value can be derived from variable data when
++ * j == SEG_LVL_REF_FRAME in function setup_segmentation() VP9 code.
++ */
++ uint16_t segment_reference : 2;
++ /** \brief Indicates if per segment skip feature is enabled.
++ * Corresponding to variable feature_enabled when
++ * j == SEG_LVL_SKIP in function setup_segmentation() VP9 code.
++ */
++ uint16_t segment_reference_skipped : 1;
++ } fields;
++ uint16_t value;
++ } segment_flags;
++
++ /** \brief Specifies the filter level information per segment.
++ * The value corresponds to variable lfi->lvl[seg][ref][mode] in VP9 code,
++ * where m is [ref], and n is [mode] in FilterLevel[m][n].
++ */
++ uint8_t filter_level[4][2];
++ /** \brief Specifies per segment Luma AC quantization scale.
++ * Corresponding to y_dequant[qindex][1] in vp9_mb_init_quantizer()
++ * function of VP9 code.
++ */
++ int16_t luma_ac_quant_scale;
++ /** \brief Specifies per segment Luma DC quantization scale.
++ * Corresponding to y_dequant[qindex][0] in vp9_mb_init_quantizer()
++ * function of VP9 code.
++ */
++ int16_t luma_dc_quant_scale;
++ /** \brief Specifies per segment Chroma AC quantization scale.
++ * Corresponding to uv_dequant[qindex][1] in vp9_mb_init_quantizer()
++ * function of VP9 code.
++ */
++ int16_t chroma_ac_quant_scale;
++ /** \brief Specifies per segment Chroma DC quantization scale.
++ * Corresponding to uv_dequant[qindex][0] in vp9_mb_init_quantizer()
++ * function of VP9 code.
++ */
++ int16_t chroma_dc_quant_scale;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++
++} VASegmentParameterVP9;
++
++
++
++/**
++ * \brief VP9 Slice Parameter Buffer Structure
++ *
++ * This structure conveys parameters related to segmentation data and should be
++ * sent once per frame.
++ *
++ * When segmentation is disabled, only SegParam[0] has valid values,
++ * all other entries should be populated with 0.
++ * Otherwise, all eight entries should be valid.
++ *
++ * Slice data buffer of VASliceDataBufferType is used
++ * to send the bitstream which should include whole or part of partition 0
++ * (at least compressed header) to the end of frame.
++ *
++ */
++typedef struct _VASliceParameterBufferVP9
++{
++ /** \brief The byte count of current frame in the bitstream buffer,
++ * starting from first byte of the buffer.
++ * It uses the name slice_data_size to be consitent with other codec,
++ * but actually means frame_data_size.
++ */
++ uint32_t slice_data_size;
++ /**
++ * offset to the first byte of partition data (control partition)
++ */
++ uint32_t slice_data_offset;
++ /**
++ * see VA_SLICE_DATA_FLAG_XXX definitions
++ */
++ uint32_t slice_data_flag;
++
++ /**
++ * \brief per segment information
++ */
++ VASegmentParameterVP9 seg_param[8];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++
++} VASliceParameterBufferVP9;
++
++
++/**@}*/
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* VA_DEC_VP9_H */
+diff -up firefox-84.0/media/ffvpx/va/va.h.ffvpx firefox-84.0/media/ffvpx/va/va.h
+--- firefox-84.0/media/ffvpx/va/va.h.ffvpx 2020-12-10 17:05:06.121983932 +0100
++++ firefox-84.0/media/ffvpx/va/va.h 2020-12-10 17:05:06.121983932 +0100
+@@ -0,0 +1,4636 @@
++/*
++ * Copyright (c) 2007-2009 Intel Corporation. All Rights Reserved.
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a
++ * copy of this software and associated documentation files (the
++ * "Software"), to deal in the Software without restriction, including
++ * without limitation the rights to use, copy, modify, merge, publish,
++ * distribute, sub license, and/or sell copies of the Software, and to
++ * permit persons to whom the Software is furnished to do so, subject to
++ * the following conditions:
++ *
++ * The above copyright notice and this permission notice (including the
++ * next paragraph) shall be included in all copies or substantial portions
++ * of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
++ * IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE LIABLE FOR
++ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ */
++/*
++ * Video Acceleration (VA) API Specification
++ *
++ * Rev. 0.30
++ * <jonathan.bian@intel.com>
++ *
++ * Revision History:
++ * rev 0.10 (12/10/2006 Jonathan Bian) - Initial draft
++ * rev 0.11 (12/15/2006 Jonathan Bian) - Fixed some errors
++ * rev 0.12 (02/05/2007 Jonathan Bian) - Added VC-1 data structures for slice level decode
++ * rev 0.13 (02/28/2007 Jonathan Bian) - Added GetDisplay()
++ * rev 0.14 (04/13/2007 Jonathan Bian) - Fixed MPEG-2 PictureParameter structure, cleaned up a few funcs.
++ * rev 0.15 (04/20/2007 Jonathan Bian) - Overhauled buffer management
++ * rev 0.16 (05/02/2007 Jonathan Bian) - Added error codes and fixed some issues with configuration
++ * rev 0.17 (05/07/2007 Jonathan Bian) - Added H.264/AVC data structures for slice level decode.
++ * rev 0.18 (05/14/2007 Jonathan Bian) - Added data structures for MPEG-4 slice level decode
++ * and MPEG-2 motion compensation.
++ * rev 0.19 (08/06/2007 Jonathan Bian) - Removed extra type for bitplane data.
++ * rev 0.20 (08/08/2007 Jonathan Bian) - Added missing fields to VC-1 PictureParameter structure.
++ * rev 0.21 (08/20/2007 Jonathan Bian) - Added image and subpicture support.
++ * rev 0.22 (08/27/2007 Jonathan Bian) - Added support for chroma-keying and global alpha.
++ * rev 0.23 (09/11/2007 Jonathan Bian) - Fixed some issues with images and subpictures.
++ * rev 0.24 (09/18/2007 Jonathan Bian) - Added display attributes.
++ * rev 0.25 (10/18/2007 Jonathan Bian) - Changed to use IDs only for some types.
++ * rev 0.26 (11/07/2007 Waldo Bastian) - Change vaCreateBuffer semantics
++ * rev 0.27 (11/19/2007 Matt Sottek) - Added DeriveImage
++ * rev 0.28 (12/06/2007 Jonathan Bian) - Added new versions of PutImage and AssociateSubpicture
++ * to enable scaling
++ * rev 0.29 (02/07/2008 Jonathan Bian) - VC1 parameter fixes,
++ * added VA_STATUS_ERROR_RESOLUTION_NOT_SUPPORTED
++ * rev 0.30 (03/01/2009 Jonathan Bian) - Added encoding support for H.264 BP and MPEG-4 SP and fixes
++ * for ISO C conformance.
++ * rev 0.31 (09/02/2009 Gwenole Beauchesne) - VC-1/H264 fields change for VDPAU and XvBA backend
++ * Application needs to relink with the new library.
++ *
++ * rev 0.31.1 (03/29/2009) - Data structure for JPEG encode
++ * rev 0.31.2 (01/13/2011 Anthony Pabon)- Added a flag to indicate Subpicture coordinates are screen
++ * screen relative rather than source video relative.
++ * rev 0.32.0 (01/13/2011 Xiang Haihao) - Add profile into VAPictureParameterBufferVC1
++ * update VAAPI to 0.32.0
++ *
++ * Acknowledgements:
++ * Some concepts borrowed from XvMC and XvImage.
++ * Waldo Bastian (Intel), Matt Sottek (Intel), Austin Yuan (Intel), and Gwenole Beauchesne (SDS)
++ * contributed to various aspects of the API.
++ */
++
++/**
++ * \file va.h
++ * \brief The Core API
++ *
++ * This file contains the \ref api_core "Core API".
++ */
++
++#ifndef _VA_H_
++#define _VA_H_
++
++#include <stddef.h>
++#include <stdint.h>
++#include "va_version.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#if defined(__GNUC__) && !defined(__COVERITY__)
++#define va_deprecated __attribute__((deprecated))
++#if __GNUC__ >= 6
++#define va_deprecated_enum va_deprecated
++#else
++#define va_deprecated_enum
++#endif
++#else
++#define va_deprecated
++#define va_deprecated_enum
++#endif
++
++/**
++ * \mainpage Video Acceleration (VA) API
++ *
++ * \section intro Introduction
++ *
++ * The main motivation for VA-API (Video Acceleration API) is to
++ * enable hardware accelerated video decode and encode at various
++ * entry-points (VLD, IDCT, Motion Compensation etc.) for the
++ * prevailing coding standards today (MPEG-2, MPEG-4 ASP/H.263, MPEG-4
++ * AVC/H.264, VC-1/VMW3, and JPEG, HEVC/H265, VP8, VP9) and video pre/post
++ * processing
++ *
++ * VA-API is split into several modules:
++ * - \ref api_core
++ * - Encoder (H264, HEVC, JPEG, MPEG2, VP8, VP9)
++ * - \ref api_enc_h264
++ * - \ref api_enc_hevc
++ * - \ref api_enc_jpeg
++ * - \ref api_enc_mpeg2
++ * - \ref api_enc_vp8
++ * - \ref api_enc_vp9
++ * - Decoder (HEVC, JPEG, VP8, VP9)
++ * - \ref api_dec_hevc
++ * - \ref api_dec_jpeg
++ * - \ref api_dec_vp8
++ * - \ref api_dec_vp9
++ * - \ref api_vpp
++ * - FEI (H264, HEVC)
++ * - \ref api_fei
++ * - \ref api_fei_h264
++ * - \ref api_fei_hevc
++ */
++
++/**
++ * \defgroup api_core Core API
++ *
++ * @{
++ */
++
++/**
++Overview
++
++The VA API is intended to provide an interface between a video decode/encode/processing
++application (client) and a hardware accelerator (server), to off-load
++video decode/encode/processing operations from the host to the hardware accelerator at various
++entry-points.
++
++The basic operation steps are:
++
++- Negotiate a mutually acceptable configuration with the server to lock
++ down profile, entrypoints, and other attributes that will not change on
++ a frame-by-frame basis.
++- Create a video decode, encode or processing context which represents a
++ "virtualized" hardware device
++- Get and fill the render buffers with the corresponding data (depending on
++ profiles and entrypoints)
++- Pass the render buffers to the server to handle the current frame
++
++Initialization & Configuration Management
++
++- Find out supported profiles
++- Find out entrypoints for a given profile
++- Find out configuration attributes for a given profile/entrypoint pair
++- Create a configuration for use by the application
++
++*/
++
++typedef void* VADisplay; /* window system dependent */
++
++typedef int VAStatus; /** Return status type from functions */
++/** Values for the return status */
++#define VA_STATUS_SUCCESS 0x00000000
++#define VA_STATUS_ERROR_OPERATION_FAILED 0x00000001
++#define VA_STATUS_ERROR_ALLOCATION_FAILED 0x00000002
++#define VA_STATUS_ERROR_INVALID_DISPLAY 0x00000003
++#define VA_STATUS_ERROR_INVALID_CONFIG 0x00000004
++#define VA_STATUS_ERROR_INVALID_CONTEXT 0x00000005
++#define VA_STATUS_ERROR_INVALID_SURFACE 0x00000006
++#define VA_STATUS_ERROR_INVALID_BUFFER 0x00000007
++#define VA_STATUS_ERROR_INVALID_IMAGE 0x00000008
++#define VA_STATUS_ERROR_INVALID_SUBPICTURE 0x00000009
++#define VA_STATUS_ERROR_ATTR_NOT_SUPPORTED 0x0000000a
++#define VA_STATUS_ERROR_MAX_NUM_EXCEEDED 0x0000000b
++#define VA_STATUS_ERROR_UNSUPPORTED_PROFILE 0x0000000c
++#define VA_STATUS_ERROR_UNSUPPORTED_ENTRYPOINT 0x0000000d
++#define VA_STATUS_ERROR_UNSUPPORTED_RT_FORMAT 0x0000000e
++#define VA_STATUS_ERROR_UNSUPPORTED_BUFFERTYPE 0x0000000f
++#define VA_STATUS_ERROR_SURFACE_BUSY 0x00000010
++#define VA_STATUS_ERROR_FLAG_NOT_SUPPORTED 0x00000011
++#define VA_STATUS_ERROR_INVALID_PARAMETER 0x00000012
++#define VA_STATUS_ERROR_RESOLUTION_NOT_SUPPORTED 0x00000013
++#define VA_STATUS_ERROR_UNIMPLEMENTED 0x00000014
++#define VA_STATUS_ERROR_SURFACE_IN_DISPLAYING 0x00000015
++#define VA_STATUS_ERROR_INVALID_IMAGE_FORMAT 0x00000016
++#define VA_STATUS_ERROR_DECODING_ERROR 0x00000017
++#define VA_STATUS_ERROR_ENCODING_ERROR 0x00000018
++/**
++ * \brief An invalid/unsupported value was supplied.
++ *
++ * This is a catch-all error code for invalid or unsupported values.
++ * e.g. value exceeding the valid range, invalid type in the context
++ * of generic attribute values.
++ */
++#define VA_STATUS_ERROR_INVALID_VALUE 0x00000019
++/** \brief An unsupported filter was supplied. */
++#define VA_STATUS_ERROR_UNSUPPORTED_FILTER 0x00000020
++/** \brief An invalid filter chain was supplied. */
++#define VA_STATUS_ERROR_INVALID_FILTER_CHAIN 0x00000021
++/** \brief Indicate HW busy (e.g. run multiple encoding simultaneously). */
++#define VA_STATUS_ERROR_HW_BUSY 0x00000022
++/** \brief An unsupported memory type was supplied. */
++#define VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE 0x00000024
++/** \brief Indicate allocated buffer size is not enough for input or output. */
++#define VA_STATUS_ERROR_NOT_ENOUGH_BUFFER 0x00000025
++#define VA_STATUS_ERROR_UNKNOWN 0xFFFFFFFF
++
++/**
++ * 1. De-interlacing flags for vaPutSurface()
++ * 2. Surface sample type for input/output surface flag
++ * - Progressive: VA_FRAME_PICTURE
++ * - Interleaved: VA_TOP_FIELD_FIRST, VA_BOTTOM_FIELD_FIRST
++ * - Field: VA_TOP_FIELD, VA_BOTTOM_FIELD
++*/
++#define VA_FRAME_PICTURE 0x00000000
++#define VA_TOP_FIELD 0x00000001
++#define VA_BOTTOM_FIELD 0x00000002
++#define VA_TOP_FIELD_FIRST 0x00000004
++#define VA_BOTTOM_FIELD_FIRST 0x00000008
++
++/**
++ * Enabled the positioning/cropping/blending feature:
++ * 1, specify the video playback position in the isurface
++ * 2, specify the cropping info for video playback
++ * 3, encoded video will blend with background color
++ */
++#define VA_ENABLE_BLEND 0x00000004 /* video area blend with the constant color */
++
++/**
++ * Clears the drawable with background color.
++ * for hardware overlay based implementation this flag
++ * can be used to turn off the overlay
++ */
++#define VA_CLEAR_DRAWABLE 0x00000008
++
++/** Color space conversion flags for vaPutSurface() */
++#define VA_SRC_COLOR_MASK 0x000000f0
++#define VA_SRC_BT601 0x00000010
++#define VA_SRC_BT709 0x00000020
++#define VA_SRC_SMPTE_240 0x00000040
++
++/** Scaling flags for vaPutSurface() */
++#define VA_FILTER_SCALING_DEFAULT 0x00000000
++#define VA_FILTER_SCALING_FAST 0x00000100
++#define VA_FILTER_SCALING_HQ 0x00000200
++#define VA_FILTER_SCALING_NL_ANAMORPHIC 0x00000300
++#define VA_FILTER_SCALING_MASK 0x00000f00
++
++/** Padding size in 4-bytes */
++#define VA_PADDING_LOW 4
++#define VA_PADDING_MEDIUM 8
++#define VA_PADDING_HIGH 16
++#define VA_PADDING_LARGE 32
++
++/**
++ * Returns a short english description of error_status
++ */
++const char *vaErrorStr(VAStatus error_status);
++
++typedef struct _VARectangle
++{
++ int16_t x;
++ int16_t y;
++ uint16_t width;
++ uint16_t height;
++} VARectangle;
++
++/** \brief Generic motion vector data structure. */
++typedef struct _VAMotionVector {
++ /** \mv0[0]: horizontal motion vector for past reference */
++ /** \mv0[1]: vertical motion vector for past reference */
++ /** \mv1[0]: horizontal motion vector for future reference */
++ /** \mv1[1]: vertical motion vector for future reference */
++ int16_t mv0[2]; /* past reference */
++ int16_t mv1[2]; /* future reference */
++} VAMotionVector;
++
++/** Type of a message callback, used for both error and info log. */
++typedef void (*VAMessageCallback)(void *user_context, const char *message);
++
++/**
++ * Set the callback for error messages, or NULL for no logging.
++ * Returns the previous one, or NULL if it was disabled.
++ */
++VAMessageCallback vaSetErrorCallback(VADisplay dpy, VAMessageCallback callback, void *user_context);
++
++/**
++ * Set the callback for info messages, or NULL for no logging.
++ * Returns the previous one, or NULL if it was disabled.
++ */
++VAMessageCallback vaSetInfoCallback(VADisplay dpy, VAMessageCallback callback, void *user_context);
++
++/**
++ * Initialization:
++ * A display must be obtained by calling vaGetDisplay() before calling
++ * vaInitialize() and other functions. This connects the API to the
++ * native window system.
++ * For X Windows, native_dpy would be from XOpenDisplay()
++ */
++typedef void* VANativeDisplay; /* window system dependent */
++
++int vaDisplayIsValid(VADisplay dpy);
++
++/**
++ * Set the override driver name instead of queried driver driver.
++ */
++VAStatus vaSetDriverName(VADisplay dpy,
++ char *driver_name
++);
++
++/**
++ * Initialize the library
++ */
++VAStatus vaInitialize (
++ VADisplay dpy,
++ int *major_version, /* out */
++ int *minor_version /* out */
++);
++
++/**
++ * After this call, all library internal resources will be cleaned up
++ */
++VAStatus vaTerminate (
++ VADisplay dpy
++);
++
++/**
++ * vaQueryVendorString returns a pointer to a zero-terminated string
++ * describing some aspects of the VA implemenation on a specific
++ * hardware accelerator. The format of the returned string is vendor
++ * specific and at the discretion of the implementer.
++ * e.g. for the Intel GMA500 implementation, an example would be:
++ * "Intel GMA500 - 2.0.0.32L.0005"
++ */
++const char *vaQueryVendorString (
++ VADisplay dpy
++);
++
++typedef int (*VAPrivFunc)(void);
++
++/**
++ * Return a function pointer given a function name in the library.
++ * This allows private interfaces into the library
++ */
++VAPrivFunc vaGetLibFunc (
++ VADisplay dpy,
++ const char *func
++);
++
++/** Currently defined profiles */
++typedef enum
++{
++ /** \brief Profile ID used for video processing. */
++ VAProfileNone = -1,
++ VAProfileMPEG2Simple = 0,
++ VAProfileMPEG2Main = 1,
++ VAProfileMPEG4Simple = 2,
++ VAProfileMPEG4AdvancedSimple = 3,
++ VAProfileMPEG4Main = 4,
++ VAProfileH264Baseline va_deprecated_enum = 5,
++ VAProfileH264Main = 6,
++ VAProfileH264High = 7,
++ VAProfileVC1Simple = 8,
++ VAProfileVC1Main = 9,
++ VAProfileVC1Advanced = 10,
++ VAProfileH263Baseline = 11,
++ VAProfileJPEGBaseline = 12,
++ VAProfileH264ConstrainedBaseline = 13,
++ VAProfileVP8Version0_3 = 14,
++ VAProfileH264MultiviewHigh = 15,
++ VAProfileH264StereoHigh = 16,
++ VAProfileHEVCMain = 17,
++ VAProfileHEVCMain10 = 18,
++ VAProfileVP9Profile0 = 19,
++ VAProfileVP9Profile1 = 20,
++ VAProfileVP9Profile2 = 21,
++ VAProfileVP9Profile3 = 22,
++ VAProfileHEVCMain12 = 23,
++ VAProfileHEVCMain422_10 = 24,
++ VAProfileHEVCMain422_12 = 25,
++ VAProfileHEVCMain444 = 26,
++ VAProfileHEVCMain444_10 = 27,
++ VAProfileHEVCMain444_12 = 28,
++ VAProfileHEVCSccMain = 29,
++ VAProfileHEVCSccMain10 = 30,
++ VAProfileHEVCSccMain444 = 31
++} VAProfile;
++
++/**
++ * Currently defined entrypoints
++ */
++typedef enum
++{
++ VAEntrypointVLD = 1,
++ VAEntrypointIZZ = 2,
++ VAEntrypointIDCT = 3,
++ VAEntrypointMoComp = 4,
++ VAEntrypointDeblocking = 5,
++ VAEntrypointEncSlice = 6, /* slice level encode */
++ VAEntrypointEncPicture = 7, /* pictuer encode, JPEG, etc */
++ /*
++ * For an implementation that supports a low power/high performance variant
++ * for slice level encode, it can choose to expose the
++ * VAEntrypointEncSliceLP entrypoint. Certain encoding tools may not be
++ * available with this entrypoint (e.g. interlace, MBAFF) and the
++ * application can query the encoding configuration attributes to find
++ * out more details if this entrypoint is supported.
++ */
++ VAEntrypointEncSliceLP = 8,
++ VAEntrypointVideoProc = 10, /**< Video pre/post-processing. */
++ /**
++ * \brief VAEntrypointFEI
++ *
++ * The purpose of FEI (Flexible Encoding Infrastructure) is to allow applications to
++ * have more controls and trade off quality for speed with their own IPs.
++ * The application can optionally provide input to ENC for extra encode control
++ * and get the output from ENC. Application can chose to modify the ENC
++ * output/PAK input during encoding, but the performance impact is significant.
++ *
++ * On top of the existing buffers for normal encode, there will be
++ * one extra input buffer (VAEncMiscParameterFEIFrameControl) and
++ * three extra output buffers (VAEncFEIMVBufferType, VAEncFEIMBModeBufferType
++ * and VAEncFEIDistortionBufferType) for VAEntrypointFEI entry function.
++ * If separate PAK is set, two extra input buffers
++ * (VAEncFEIMVBufferType, VAEncFEIMBModeBufferType) are needed for PAK input.
++ **/
++ VAEntrypointFEI = 11,
++ /**
++ * \brief VAEntrypointStats
++ *
++ * A pre-processing function for getting some statistics and motion vectors is added,
++ * and some extra controls for Encode pipeline are provided. The application can
++ * optionally call the statistics function to get motion vectors and statistics like
++ * variances, distortions before calling Encode function via this entry point.
++ *
++ * Checking whether Statistics is supported can be performed with vaQueryConfigEntrypoints().
++ * If Statistics entry point is supported, then the list of returned entry-points will
++ * include #VAEntrypointStats. Supported pixel format, maximum resolution and statistics
++ * specific attributes can be obtained via normal attribute query. One input buffer
++ * (VAStatsStatisticsParameterBufferType) and one or two output buffers
++ * (VAStatsStatisticsBufferType, VAStatsStatisticsBottomFieldBufferType (for interlace only)
++ * and VAStatsMVBufferType) are needed for this entry point.
++ **/
++ VAEntrypointStats = 12,
++} VAEntrypoint;
++
++/** Currently defined configuration attribute types */
++typedef enum
++{
++ VAConfigAttribRTFormat = 0,
++ VAConfigAttribSpatialResidual = 1,
++ VAConfigAttribSpatialClipping = 2,
++ VAConfigAttribIntraResidual = 3,
++ VAConfigAttribEncryption = 4,
++ VAConfigAttribRateControl = 5,
++
++ /** @name Attributes for decoding */
++ /**@{*/
++ /**
++ * \brief Slice Decoding mode. Read/write.
++ *
++ * This attribute determines what mode the driver supports for slice
++ * decoding, through vaGetConfigAttributes(); and what mode the user
++ * will be providing to the driver, through vaCreateConfig(), if the
++ * driver supports those. If this attribute is not set by the user then
++ * it is assumed that VA_DEC_SLICE_MODE_NORMAL mode is used.
++ *
++ * See \c VA_DEC_SLICE_MODE_xxx for the list of slice decoding modes.
++ */
++ VAConfigAttribDecSliceMode = 6,
++ /**
++ * \brief JPEG decoding attribute. Read-only.
++ *
++ * This attribute exposes a number of capabilities of the underlying
++ * JPEG implementation. The attribute value is partitioned into fields as defined in the
++ * VAConfigAttribValDecJPEG union.
++ */
++ VAConfigAttribDecJPEG = 7,
++ /**
++ * \brief Decode processing support. Read/write.
++ *
++ * This attribute determines if the driver supports video processing
++ * with decoding using the decoding context in a single call, through
++ * vaGetConfigAttributes(); and if the user may use this feature,
++ * through vaCreateConfig(), if the driver supports the user scenario.
++ * The user will essentially create a regular decode VAContext. Therefore,
++ * the parameters of vaCreateContext() such as picture_width, picture_height
++ * and render_targets are in relation to the decode output parameters
++ * (not processing output parameters) as normal.
++ * If this attribute is not set by the user then it is assumed that no
++ * extra processing is done after decoding for this decode context.
++ *
++ * Since essentially the application is creating a decoder config and context,
++ * all function calls that take in the config (e.g. vaQuerySurfaceAttributes())
++ * or context are in relation to the decoder, except those video processing
++ * function specified in the next paragraph.
++ *
++ * Once the decode config and context are created, the user must further
++ * query the supported processing filters using vaQueryVideoProcFilters(),
++ * vaQueryVideoProcFilterCaps(), vaQueryVideoProcPipelineCaps() by specifying
++ * the created decode context. The user must provide processing information
++ * and extra processing output surfaces as "additional_outputs" to the driver
++ * through VAProcPipelineParameterBufferType. The render_target specified
++ * at vaBeginPicture() time refers to the decode output surface. The
++ * target surface for the output of processing needs to be a different
++ * surface since the decode process requires the original reconstructed buffer.
++ * The “surface” member of VAProcPipelineParameterBuffer should be set to the
++ * same as “render_target” set in vaBeginPicture(), but the driver may choose
++ * to ignore this parameter.
++ */
++ VAConfigAttribDecProcessing = 8,
++ /** @name Attributes for encoding */
++ /**@{*/
++ /**
++ * \brief Packed headers mode. Read/write.
++ *
++ * This attribute determines what packed headers the driver supports,
++ * through vaGetConfigAttributes(); and what packed headers the user
++ * will be providing to the driver, through vaCreateConfig(), if the
++ * driver supports those.
++ *
++ * See \c VA_ENC_PACKED_HEADER_xxx for the list of packed headers.
++ */
++ VAConfigAttribEncPackedHeaders = 10,
++ /**
++ * \brief Interlaced mode. Read/write.
++ *
++ * This attribute determines what kind of interlaced encoding mode
++ * the driver supports.
++ *
++ * See \c VA_ENC_INTERLACED_xxx for the list of interlaced modes.
++ */
++ VAConfigAttribEncInterlaced = 11,
++ /**
++ * \brief Maximum number of reference frames. Read-only.
++ *
++ * This attribute determines the maximum number of reference
++ * frames supported for encoding.
++ *
++ * Note: for H.264 encoding, the value represents the maximum number
++ * of reference frames for both the reference picture list 0 (bottom
++ * 16 bits) and the reference picture list 1 (top 16 bits).
++ */
++ VAConfigAttribEncMaxRefFrames = 13,
++ /**
++ * \brief Maximum number of slices per frame. Read-only.
++ *
++ * This attribute determines the maximum number of slices the
++ * driver can support to encode a single frame.
++ */
++ VAConfigAttribEncMaxSlices = 14,
++ /**
++ * \brief Slice structure. Read-only.
++ *
++ * This attribute determines slice structures supported by the
++ * driver for encoding. This attribute is a hint to the user so
++ * that he can choose a suitable surface size and how to arrange
++ * the encoding process of multiple slices per frame.
++ *
++ * More specifically, for H.264 encoding, this attribute
++ * determines the range of accepted values to
++ * VAEncSliceParameterBufferH264::macroblock_address and
++ * VAEncSliceParameterBufferH264::num_macroblocks.
++ *
++ * See \c VA_ENC_SLICE_STRUCTURE_xxx for the supported slice
++ * structure types.
++ */
++ VAConfigAttribEncSliceStructure = 15,
++ /**
++ * \brief Macroblock information. Read-only.
++ *
++ * This attribute determines whether the driver supports extra
++ * encoding information per-macroblock. e.g. QP.
++ *
++ * More specifically, for H.264 encoding, if the driver returns a non-zero
++ * value for this attribute, this means the application can create
++ * additional #VAEncMacroblockParameterBufferH264 buffers referenced
++ * through VAEncSliceParameterBufferH264::macroblock_info.
++ */
++ VAConfigAttribEncMacroblockInfo = 16,
++ /**
++ * \brief Maximum picture width. Read-only.
++ *
++ * This attribute determines the maximum picture width the driver supports
++ * for a given configuration.
++ */
++ VAConfigAttribMaxPictureWidth = 18,
++ /**
++ * \brief Maximum picture height. Read-only.
++ *
++ * This attribute determines the maximum picture height the driver supports
++ * for a given configuration.
++ */
++ VAConfigAttribMaxPictureHeight = 19,
++ /**
++ * \brief JPEG encoding attribute. Read-only.
++ *
++ * This attribute exposes a number of capabilities of the underlying
++ * JPEG implementation. The attribute value is partitioned into fields as defined in the
++ * VAConfigAttribValEncJPEG union.
++ */
++ VAConfigAttribEncJPEG = 20,
++ /**
++ * \brief Encoding quality range attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports different quality level settings
++ * for encoding. A value less than or equal to 1 means that the encoder only has a single
++ * quality setting, and a value greater than 1 represents the number of quality levels
++ * that can be configured. e.g. a value of 2 means there are two distinct quality levels.
++ */
++ VAConfigAttribEncQualityRange = 21,
++ /**
++ * \brief Encoding quantization attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports certain types of quantization methods
++ * for encoding (e.g. trellis). See \c VA_ENC_QUANTIZATION_xxx for the list of quantization methods
++ */
++ VAConfigAttribEncQuantization = 22,
++ /**
++ * \brief Encoding intra refresh attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports certain types of intra refresh methods
++ * for encoding (e.g. adaptive intra refresh or rolling intra refresh).
++ * See \c VA_ENC_INTRA_REFRESH_xxx for intra refresh methods
++ */
++ VAConfigAttribEncIntraRefresh = 23,
++ /**
++ * \brief Encoding skip frame attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports sending skip frame parameters
++ * (VAEncMiscParameterTypeSkipFrame) to the encoder's rate control, when the user has
++ * externally skipped frames.
++ */
++ VAConfigAttribEncSkipFrame = 24,
++ /**
++ * \brief Encoding region-of-interest (ROI) attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports region-of-interest (ROI) encoding,
++ * based on user provided ROI rectangles. The attribute value is partitioned into fields
++ * as defined in the VAConfigAttribValEncROI union.
++ *
++ * If ROI encoding is supported, the ROI information is passed to the driver using
++ * VAEncMiscParameterTypeROI.
++ */
++ VAConfigAttribEncROI = 25,
++ /**
++ * \brief Encoding extended rate control attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports any extended rate control features
++ * The attribute value is partitioned into fields as defined in the
++ * VAConfigAttribValEncRateControlExt union.
++ */
++ VAConfigAttribEncRateControlExt = 26,
++ /**
++ * \brief Processing rate reporting attribute. Read-only.
++ *
++ * This attribute conveys whether the driver supports reporting of
++ * encode/decode processing rate based on certain set of parameters
++ * (i.e. levels, I frame internvals) for a given configuration.
++ * If this is supported, vaQueryProcessingRate() can be used to get
++ * encode or decode processing rate.
++ * See \c VA_PROCESSING_RATE_xxx for encode/decode processing rate
++ */
++ VAConfigAttribProcessingRate = 27,
++ /**
++ * \brief Encoding dirty rectangle. Read-only.
++ *
++ * This attribute conveys whether the driver supports dirty rectangle.
++ * encoding, based on user provided ROI rectangles which indicate the rectangular areas
++ * where the content has changed as compared to the previous picture. The regions of the
++ * picture that are not covered by dirty rect rectangles are assumed to have not changed
++ * compared to the previous picture. The encoder may do some optimizations based on
++ * this information. The attribute value returned indicates the number of regions that
++ * are supported. e.g. A value of 0 means dirty rect encoding is not supported. If dirty
++ * rect encoding is supported, the ROI information is passed to the driver using
++ * VAEncMiscParameterTypeDirtyRect.
++ */
++ VAConfigAttribEncDirtyRect = 28,
++ /**
++ * \brief Parallel Rate Control (hierachical B) attribute. Read-only.
++ *
++ * This attribute conveys whether the encoder supports parallel rate control.
++ * It is a integer value 0 - unsupported, > 0 - maximum layer supported.
++ * This is the way when hireachical B frames are encoded, multiple independent B frames
++ * on the same layer may be processed at same time. If supported, app may enable it by
++ * setting enable_parallel_brc in VAEncMiscParameterRateControl,and the number of B frames
++ * per layer per GOP will be passed to driver through VAEncMiscParameterParallelRateControl
++ * structure.Currently three layers are defined.
++ */
++ VAConfigAttribEncParallelRateControl = 29,
++ /**
++ * \brief Dynamic Scaling Attribute. Read-only.
++ *
++ * This attribute conveys whether encoder is capable to determine dynamic frame
++ * resolutions adaptive to bandwidth utilization and processing power, etc.
++ * It is a boolean value 0 - unsupported, 1 - supported.
++ * If it is supported,for VP9, suggested frame resolution can be retrieved from VACodedBufferVP9Status.
++ */
++ VAConfigAttribEncDynamicScaling = 30,
++ /**
++ * \brief frame size tolerance support
++ * it indicates the tolerance of frame size
++ */
++ VAConfigAttribFrameSizeToleranceSupport = 31,
++ /**
++ * \brief Encode function type for FEI.
++ *
++ * This attribute conveys whether the driver supports different function types for encode.
++ * It can be VA_FEI_FUNCTION_ENC, VA_FEI_FUNCTION_PAK, or VA_FEI_FUNCTION_ENC_PAK. Currently
++ * it is for FEI entry point only.
++ * Default is VA_FEI_FUNCTION_ENC_PAK.
++ */
++ VAConfigAttribFEIFunctionType = 32,
++ /**
++ * \brief Maximum number of FEI MV predictors. Read-only.
++ *
++ * This attribute determines the maximum number of MV predictors the driver
++ * can support to encode a single frame. 0 means no MV predictor is supported.
++ * Currently it is for FEI entry point only.
++ */
++ VAConfigAttribFEIMVPredictors = 33,
++ /**
++ * \brief Statistics attribute. Read-only.
++ *
++ * This attribute exposes a number of capabilities of the VAEntrypointStats entry
++ * point. The attribute value is partitioned into fields as defined in the
++ * VAConfigAttribValStats union. Currently it is for VAEntrypointStats only.
++ */
++ VAConfigAttribStats = 34,
++ /**
++ * \brief Tile Support Attribute. Read-only.
++ *
++ * This attribute conveys whether encoder is capable to support tiles.
++ * If not supported, the tile related parameters sent to encoder, such as
++ * tiling structure, should be ignored. 0 - unsupported, 1 - supported.
++ */
++ VAConfigAttribEncTileSupport = 35,
++ /**
++ * \brief whether accept rouding setting from application. Read-only.
++ * This attribute is for encode quality, if it is report,
++ * application can change the rounding setting by VAEncMiscParameterTypeCustomRoundingControl
++ */
++ VAConfigAttribCustomRoundingControl = 36,
++ /**
++ * \brief Encoding QP info block size attribute. Read-only.
++ * This attribute conveys the block sizes that underlying driver
++ * support for QP info for buffer #VAEncQpBuffer.
++ */
++ VAConfigAttribQPBlockSize = 37,
++ /**
++ * \brief encode max frame size attribute. Read-only
++ * attribute value \c VAConfigAttribValMaxFrameSize represent max frame size support
++ */
++ VAConfigAttribMaxFrameSize = 38,
++ /** \brief inter frame prediction directrion attribute. Read-only.
++ * this attribute conveys the prediction direction (backward or forword) for specific config
++ * the value could be VA_PREDICTION_DIRECTION_XXXX. it can be combined with VAConfigAttribEncMaxRefFrames
++ * to describe reference list , and the prediction direction. if this attrib is not present,both direction
++ * should be supported, no restriction.
++ * for example: normal HEVC encoding , maximum reference frame number in reflist 0 and reflist 1 is deduced
++ * by VAConfigAttribEncMaxRefFrames. so there are typical P frame, B frame,
++ * if VAConfigAttribPredictionDirection is also present. it will stipulate prediction direction in both
++ * reference list. if only one prediction direction present(such as PREVIOUS),all reference frame should be
++ * previous frame (PoC < current).
++ */
++ VAConfigAttribPredictionDirection = 39,
++ /** \brief combined submission of multiple frames from different streams, it is optimization for different HW
++ * implementation, multiple frames encode/decode can improve HW concurrency
++ */
++ VAConfigAttribMultipleFrame = 40,
++ /**@}*/
++ VAConfigAttribTypeMax
++} VAConfigAttribType;
++
++/**
++ * Configuration attributes
++ * If there is more than one value for an attribute, a default
++ * value will be assigned to the attribute if the client does not
++ * specify the attribute when creating a configuration
++ */
++typedef struct _VAConfigAttrib {
++ VAConfigAttribType type;
++ uint32_t value; /* OR'd flags (bits) for this attribute */
++} VAConfigAttrib;
++
++/* Attribute values for VAConfigAttribRTFormat. */
++
++#define VA_RT_FORMAT_YUV420 0x00000001 ///< YUV 4:2:0 8-bit.
++#define VA_RT_FORMAT_YUV422 0x00000002 ///< YUV 4:2:2 8-bit.
++#define VA_RT_FORMAT_YUV444 0x00000004 ///< YUV 4:4:4 8-bit.
++#define VA_RT_FORMAT_YUV411 0x00000008 ///< YUV 4:1:1 8-bit.
++#define VA_RT_FORMAT_YUV400 0x00000010 ///< Greyscale 8-bit.
++#define VA_RT_FORMAT_YUV420_10 0x00000100 ///< YUV 4:2:0 10-bit.
++#define VA_RT_FORMAT_YUV422_10 0x00000200 ///< YUV 4:2:2 10-bit.
++#define VA_RT_FORMAT_YUV444_10 0x00000400 ///< YUV 4:4:4 10-bit.
++#define VA_RT_FORMAT_YUV420_12 0x00001000 ///< YUV 4:2:0 12-bit.
++#define VA_RT_FORMAT_YUV422_12 0x00002000 ///< YUV 4:2:2 12-bit.
++#define VA_RT_FORMAT_YUV444_12 0x00004000 ///< YUV 4:4:4 12-bit.
++
++#define VA_RT_FORMAT_RGB16 0x00010000 ///< Packed RGB, 16 bits per pixel.
++#define VA_RT_FORMAT_RGB32 0x00020000 ///< Packed RGB, 32 bits per pixel, 8 bits per colour sample.
++#define VA_RT_FORMAT_RGBP 0x00100000 ///< Planar RGB, 8 bits per sample.
++#define VA_RT_FORMAT_RGB32_10 0x00200000 ///< Packed RGB, 32 bits per pixel, 10 bits per colour sample.
++
++#define VA_RT_FORMAT_PROTECTED 0x80000000
++
++#define VA_RT_FORMAT_RGB32_10BPP VA_RT_FORMAT_RGB32_10 ///< @deprecated use VA_RT_FORMAT_RGB32_10 instead.
++#define VA_RT_FORMAT_YUV420_10BPP VA_RT_FORMAT_YUV420_10 ///< @deprecated use VA_RT_FORMAT_YUV420_10 instead.
++
++/** @name Attribute values for VAConfigAttribRateControl */
++/**@{*/
++/** \brief Driver does not support any form of rate control. */
++#define VA_RC_NONE 0x00000001
++/** \brief Constant bitrate. */
++#define VA_RC_CBR 0x00000002
++/** \brief Variable bitrate. */
++#define VA_RC_VBR 0x00000004
++/** \brief Video conference mode. */
++#define VA_RC_VCM 0x00000008
++/** \brief Constant QP. */
++#define VA_RC_CQP 0x00000010
++/** \brief Variable bitrate with peak rate higher than average bitrate. */
++#define VA_RC_VBR_CONSTRAINED 0x00000020
++/** \brief Intelligent Constant Quality. Provided an initial ICQ_quality_factor,
++ * adjusts QP at a frame and MB level based on motion to improve subjective quality. */
++#define VA_RC_ICQ 0x00000040
++/** \brief Macroblock based rate control. Per MB control is decided
++ * internally in the encoder. It may be combined with other RC modes, except CQP. */
++#define VA_RC_MB 0x00000080
++/** \brief Constant Frame Size, it is used for small tolerent */
++#define VA_RC_CFS 0x00000100
++/** \brief Parallel BRC, for hierachical B.
++ *
++ * For hierachical B, B frames can be refered by other B frames.
++ * Currently three layers of hierachy are defined:
++ * B0 - regular B, no reference to other B frames.
++ * B1 - reference to only I, P and regular B0 frames.
++ * B2 - reference to any other frames, including B1.
++ * In Hierachical B structure, B frames on the same layer can be processed
++ * simultaneously. And BRC would adjust accordingly. This is so called
++ * Parallel BRC. */
++#define VA_RC_PARALLEL 0x00000200
++/** \brief Quality defined VBR
++ * Use Quality factor to determine the good enough QP for each MB such that
++ * good enough quality can be obtained without waste of bits
++ * for this BRC mode, you must set all legacy VBR parameters
++ * and reuse quality_factor in \c VAEncMiscParameterRateControl
++ * */
++#define VA_RC_QVBR 0x00000400
++/** \brief Average VBR
++ * Average variable bitrate control algorithm focuses on overall encoding
++ * quality while meeting the specified target bitrate, within the accuracy
++ * range, after a convergence period.
++ * bits_per_second in VAEncMiscParameterRateControl is target bitrate for AVBR.
++ * Convergence is specified in the unit of frame.
++ * window_size in VAEncMiscParameterRateControl is equal to convergence for AVBR.
++ * Accuracy is in the range of [1,100], 1 means one percent, and so on.
++ * target_percentage in VAEncMiscParameterRateControl is equal to accuracy for AVBR. */
++#define VA_RC_AVBR 0x00000800
++
++/**@}*/
++
++/** @name Attribute values for VAConfigAttribDecSliceMode */
++/**@{*/
++/** \brief Driver supports normal mode for slice decoding */
++#define VA_DEC_SLICE_MODE_NORMAL 0x00000001
++/** \brief Driver supports base mode for slice decoding */
++#define VA_DEC_SLICE_MODE_BASE 0x00000002
++
++/** @name Attribute values for VAConfigAttribDecJPEG */
++/**@{*/
++typedef union _VAConfigAttribValDecJPEG {
++ struct {
++ /** \brief Set to (1 << VA_ROTATION_xxx) for supported rotation angles. */
++ uint32_t rotation : 4;
++ /** \brief Reserved for future use. */
++ uint32_t reserved : 28;
++ } bits;
++ uint32_t value;
++} VAConfigAttribValDecJPEG;
++/** @name Attribute values for VAConfigAttribDecProcessing */
++/**@{*/
++/** \brief No decoding + processing in a single decoding call. */
++#define VA_DEC_PROCESSING_NONE 0x00000000
++/** \brief Decode + processing in a single decoding call. */
++#define VA_DEC_PROCESSING 0x00000001
++/**@}*/
++
++/** @name Attribute values for VAConfigAttribEncPackedHeaders */
++/**@{*/
++/** \brief Driver does not support any packed headers mode. */
++#define VA_ENC_PACKED_HEADER_NONE 0x00000000
++/**
++ * \brief Driver supports packed sequence headers. e.g. SPS for H.264.
++ *
++ * Application must provide it to driver once this flag is returned through
++ * vaGetConfigAttributes()
++ */
++#define VA_ENC_PACKED_HEADER_SEQUENCE 0x00000001
++/**
++ * \brief Driver supports packed picture headers. e.g. PPS for H.264.
++ *
++ * Application must provide it to driver once this falg is returned through
++ * vaGetConfigAttributes()
++ */
++#define VA_ENC_PACKED_HEADER_PICTURE 0x00000002
++/**
++ * \brief Driver supports packed slice headers. e.g. slice_header() for H.264.
++ *
++ * Application must provide it to driver once this flag is returned through
++ * vaGetConfigAttributes()
++ */
++#define VA_ENC_PACKED_HEADER_SLICE 0x00000004
++/**
++ * \brief Driver supports misc packed headers. e.g. SEI for H.264.
++ *
++ * @deprecated
++ * This is a deprecated packed header flag, All applications can use
++ * \c VA_ENC_PACKED_HEADER_RAW_DATA to pass the corresponding packed
++ * header data buffer to the driver
++ */
++#define VA_ENC_PACKED_HEADER_MISC 0x00000008
++/** \brief Driver supports raw packed header, see VAEncPackedHeaderRawData */
++#define VA_ENC_PACKED_HEADER_RAW_DATA 0x00000010
++/**@}*/
++
++/** @name Attribute values for VAConfigAttribEncInterlaced */
++/**@{*/
++/** \brief Driver does not support interlaced coding. */
++#define VA_ENC_INTERLACED_NONE 0x00000000
++/** \brief Driver supports interlaced frame coding. */
++#define VA_ENC_INTERLACED_FRAME 0x00000001
++/** \brief Driver supports interlaced field coding. */
++#define VA_ENC_INTERLACED_FIELD 0x00000002
++/** \brief Driver supports macroblock adaptive frame field coding. */
++#define VA_ENC_INTERLACED_MBAFF 0x00000004
++/** \brief Driver supports picture adaptive frame field coding. */
++#define VA_ENC_INTERLACED_PAFF 0x00000008
++/**@}*/
++
++/** @name Attribute values for VAConfigAttribEncSliceStructure */
++/**@{*/
++/** \brief Driver supports a power-of-two number of rows per slice. */
++#define VA_ENC_SLICE_STRUCTURE_POWER_OF_TWO_ROWS 0x00000001
++/** \brief Driver supports an arbitrary number of macroblocks per slice. */
++#define VA_ENC_SLICE_STRUCTURE_ARBITRARY_MACROBLOCKS 0x00000002
++/** \brief Dirver support 1 rows per slice */
++#define VA_ENC_SLICE_STRUCTURE_EQUAL_ROWS 0x00000004
++/** \brief Dirver support max encoded slice size per slice */
++#define VA_ENC_SLICE_STRUCTURE_MAX_SLICE_SIZE 0x00000008
++/** \brief Driver supports an arbitrary number of rows per slice. */
++#define VA_ENC_SLICE_STRUCTURE_ARBITRARY_ROWS 0x00000010
++/**@}*/
++
++/** \brief Attribute value for VAConfigAttribMaxFrameSize */
++typedef union _VAConfigAttribValMaxFrameSize {
++ struct {
++ /** \brief support max frame size
++ * if max_frame_size == 1, VAEncMiscParameterTypeMaxFrameSize/VAEncMiscParameterBufferMaxFrameSize
++ * could be used to set the frame size, if multiple_pass also equal 1, VAEncMiscParameterTypeMultiPassFrameSize
++ * VAEncMiscParameterBufferMultiPassFrameSize could be used to set frame size and pass information
++ */
++ uint32_t max_frame_size : 1;
++ /** \brief multiple_pass support */
++ uint32_t multiple_pass : 1;
++ /** \brief reserved bits for future, must be zero*/
++ uint32_t reserved :30;
++ } bits;
++ uint32_t value;
++} VAConfigAttribValMaxFrameSize;
++
++/** \brief Attribute value for VAConfigAttribEncJPEG */
++typedef union _VAConfigAttribValEncJPEG {
++ struct {
++ /** \brief set to 1 for arithmatic coding. */
++ uint32_t arithmatic_coding_mode : 1;
++ /** \brief set to 1 for progressive dct. */
++ uint32_t progressive_dct_mode : 1;
++ /** \brief set to 1 for non-interleaved. */
++ uint32_t non_interleaved_mode : 1;
++ /** \brief set to 1 for differential. */
++ uint32_t differential_mode : 1;
++ uint32_t max_num_components : 3;
++ uint32_t max_num_scans : 4;
++ uint32_t max_num_huffman_tables : 3;
++ uint32_t max_num_quantization_tables : 3;
++ } bits;
++ uint32_t value;
++} VAConfigAttribValEncJPEG;
++
++/** @name Attribute values for VAConfigAttribEncQuantization */
++/**@{*/
++/** \brief Driver does not support special types of quantization */
++#define VA_ENC_QUANTIZATION_NONE 0x00000000
++/** \brief Driver supports trellis quantization */
++#define VA_ENC_QUANTIZATION_TRELLIS_SUPPORTED 0x00000001
++/**@}*/
++
++/** @name Attribute values for VAConfigAttribPredictionDirection */
++/**@{*/
++/** \brief Driver support forward reference frame (inter frame for vpx, P frame for H26x MPEG)
++ * can work with the VAConfigAttribEncMaxRefFrames. for example: low delay B frame of HEVC.
++ * these value can be OR'd together. typical value should be VA_PREDICTION_DIRECTION_PREVIOUS
++ * or VA_PREDICTION_DIRECTION_PREVIOUS | VA_PREDICTION_DIRECTION_FUTURE, theoretically, there
++ * are no stream only include future reference frame.
++ */
++#define VA_PREDICTION_DIRECTION_PREVIOUS 0x00000001
++/** \brief Driver support backward prediction frame/slice */
++#define VA_PREDICTION_DIRECTION_FUTURE 0x00000002
++/**@}*/
++
++/** @name Attribute values for VAConfigAttribEncIntraRefresh */
++/**@{*/
++/** \brief Driver does not support intra refresh */
++#define VA_ENC_INTRA_REFRESH_NONE 0x00000000
++/** \brief Driver supports column based rolling intra refresh */
++#define VA_ENC_INTRA_REFRESH_ROLLING_COLUMN 0x00000001
++/** \brief Driver supports row based rolling intra refresh */
++#define VA_ENC_INTRA_REFRESH_ROLLING_ROW 0x00000002
++/** \brief Driver supports adaptive intra refresh */
++#define VA_ENC_INTRA_REFRESH_ADAPTIVE 0x00000010
++/** \brief Driver supports cyclic intra refresh */
++#define VA_ENC_INTRA_REFRESH_CYCLIC 0x00000020
++/** \brief Driver supports intra refresh of P frame*/
++#define VA_ENC_INTRA_REFRESH_P_FRAME 0x00010000
++/** \brief Driver supports intra refresh of B frame */
++#define VA_ENC_INTRA_REFRESH_B_FRAME 0x00020000
++/** \brief Driver supports intra refresh of multiple reference encoder */
++#define VA_ENC_INTRA_REFRESH_MULTI_REF 0x00040000
++
++/**@}*/
++
++/** \brief Attribute value for VAConfigAttribEncROI */
++typedef union _VAConfigAttribValEncROI {
++ struct {
++ /** \brief The number of ROI regions supported, 0 if ROI is not supported. */
++ uint32_t num_roi_regions : 8;
++ /**
++ * \brief A flag indicates whether ROI priority is supported
++ *
++ * \ref roi_rc_priority_support equal to 1 specifies the underlying driver supports
++ * ROI priority when VAConfigAttribRateControl != VA_RC_CQP, user can use \c roi_value
++ * in #VAEncROI to set ROI priority. \ref roi_rc_priority_support equal to 0 specifies
++ * the underlying driver doesn't support ROI priority.
++ *
++ * User should ignore \ref roi_rc_priority_support when VAConfigAttribRateControl == VA_RC_CQP
++ * because ROI delta QP is always required when VAConfigAttribRateControl == VA_RC_CQP.
++ */
++ uint32_t roi_rc_priority_support : 1;
++ /**
++ * \brief A flag indicates whether ROI delta QP is supported
++ *
++ * \ref roi_rc_qp_delta_support equal to 1 specifies the underlying driver supports
++ * ROI delta QP when VAConfigAttribRateControl != VA_RC_CQP, user can use \c roi_value
++ * in #VAEncROI to set ROI delta QP. \ref roi_rc_qp_delta_support equal to 0 specifies
++ * the underlying driver doesn't support ROI delta QP.
++ *
++ * User should ignore \ref roi_rc_qp_delta_support when VAConfigAttribRateControl == VA_RC_CQP
++ * because ROI delta QP is always required when VAConfigAttribRateControl == VA_RC_CQP.
++ */
++ uint32_t roi_rc_qp_delta_support : 1;
++ uint32_t reserved : 22;
++ } bits;
++ uint32_t value;
++} VAConfigAttribValEncROI;
++
++/** \brief Attribute value for VAConfigAttribEncRateControlExt */
++typedef union _VAConfigAttribValEncRateControlExt {
++ struct {
++ /**
++ * \brief The maximum number of temporal layers minus 1
++ *
++ * \ref max_num_temporal_layers_minus1 plus 1 specifies the maximum number of temporal
++ * layers that supported by the underlying driver. \ref max_num_temporal_layers_minus1
++ * equal to 0 implies the underlying driver doesn't support encoding with temporal layer.
++ */
++ uint32_t max_num_temporal_layers_minus1 : 8;
++
++ /**
++ * /brief support temporal layer bit-rate control flag
++ *
++ * \ref temporal_layer_bitrate_control_flag equal to 1 specifies the underlying driver
++ * can support bit-rate control per temporal layer when (#VAConfigAttribRateControl == #VA_RC_CBR ||
++ * #VAConfigAttribRateControl == #VA_RC_VBR).
++ *
++ * The underlying driver must set \ref temporal_layer_bitrate_control_flag to 0 when
++ * \c max_num_temporal_layers_minus1 is equal to 0
++ *
++ * To use bit-rate control per temporal layer, an application must send the right layer
++ * structure via #VAEncMiscParameterTemporalLayerStructure at the beginning of a coded sequence
++ * and then followed by #VAEncMiscParameterRateControl and #VAEncMiscParameterFrameRate structures
++ * for each layer, using the \c temporal_id field as the layer identifier. Otherwise
++ * the driver doesn't use bitrate control per temporal layer if an application doesn't send the
++ * layer structure via #VAEncMiscParameterTemporalLayerStructure to the driver. The driver returns
++ * VA_STATUS_ERROR_INVALID_PARAMETER if an application sends a wrong layer structure or doesn't send
++ * #VAEncMiscParameterRateControl and #VAEncMiscParameterFrameRate for each layer.
++ *
++ * The driver will ignore #VAEncMiscParameterTemporalLayerStructure and the \c temporal_id field
++ * in #VAEncMiscParameterRateControl and #VAEncMiscParameterFrameRate if
++ * \ref temporal_layer_bitrate_control_flag is equal to 0 or #VAConfigAttribRateControl == #VA_RC_CQP
++ */
++ uint32_t temporal_layer_bitrate_control_flag : 1;
++ uint32_t reserved : 23;
++ } bits;
++ uint32_t value;
++} VAConfigAttribValEncRateControlExt;
++
++/** \brief Attribute value for VAConfigAttribMultipleFrame*/
++typedef union _VAConfigAttribValMultipleFrame {
++ struct {
++ /** \brief max num of concurrent frames from different stream */
++ uint32_t max_num_concurrent_frames : 8;
++ /** \brief indicate whether all stream must support same quality level
++ * if mixed_quality_level == 0, same quality level setting for multple streams is required
++ * if mixed_quality_level == 1, different stream can have different quality level*/
++ uint32_t mixed_quality_level : 1;
++ /** \brief reserved bit for future, must be zero */
++ uint32_t reserved : 23;
++ } bits;
++ uint32_t value;
++}VAConfigAttribValMultipleFrame;
++
++/** @name Attribute values for VAConfigAttribProcessingRate. */
++/**@{*/
++/** \brief Driver does not support processing rate report */
++#define VA_PROCESSING_RATE_NONE 0x00000000
++/** \brief Driver supports encode processing rate report */
++#define VA_PROCESSING_RATE_ENCODE 0x00000001
++/** \brief Driver supports decode processing rate report */
++#define VA_PROCESSING_RATE_DECODE 0x00000002
++/**@}*/
++/**
++ * if an attribute is not applicable for a given
++ * profile/entrypoint pair, then set the value to the following
++ */
++#define VA_ATTRIB_NOT_SUPPORTED 0x80000000
++
++/** Get maximum number of profiles supported by the implementation */
++int vaMaxNumProfiles (
++ VADisplay dpy
++);
++
++/** Get maximum number of entrypoints supported by the implementation */
++int vaMaxNumEntrypoints (
++ VADisplay dpy
++);
++
++/** Get maximum number of attributs supported by the implementation */
++int vaMaxNumConfigAttributes (
++ VADisplay dpy
++);
++
++/**
++ * Query supported profiles
++ * The caller must provide a "profile_list" array that can hold at
++ * least vaMaxNumProfile() entries. The actual number of profiles
++ * returned in "profile_list" is returned in "num_profile".
++ */
++VAStatus vaQueryConfigProfiles (
++ VADisplay dpy,
++ VAProfile *profile_list, /* out */
++ int *num_profiles /* out */
++);
++
++/**
++ * Query supported entrypoints for a given profile
++ * The caller must provide an "entrypoint_list" array that can hold at
++ * least vaMaxNumEntrypoints() entries. The actual number of entrypoints
++ * returned in "entrypoint_list" is returned in "num_entrypoints".
++ */
++VAStatus vaQueryConfigEntrypoints (
++ VADisplay dpy,
++ VAProfile profile,
++ VAEntrypoint *entrypoint_list, /* out */
++ int *num_entrypoints /* out */
++);
++
++/**
++ * Get attributes for a given profile/entrypoint pair
++ * The caller must provide an "attrib_list" with all attributes to be
++ * retrieved. Upon return, the attributes in "attrib_list" have been
++ * updated with their value. Unknown attributes or attributes that are
++ * not supported for the given profile/entrypoint pair will have their
++ * value set to VA_ATTRIB_NOT_SUPPORTED
++ */
++VAStatus vaGetConfigAttributes (
++ VADisplay dpy,
++ VAProfile profile,
++ VAEntrypoint entrypoint,
++ VAConfigAttrib *attrib_list, /* in/out */
++ int num_attribs
++);
++
++/** Generic ID type, can be re-typed for specific implementation */
++typedef unsigned int VAGenericID;
++
++typedef VAGenericID VAConfigID;
++
++/**
++ * Create a configuration for the video decode/encode/processing pipeline
++ * it passes in the attribute list that specifies the attributes it cares
++ * about, with the rest taking default values.
++ */
++VAStatus vaCreateConfig (
++ VADisplay dpy,
++ VAProfile profile,
++ VAEntrypoint entrypoint,
++ VAConfigAttrib *attrib_list,
++ int num_attribs,
++ VAConfigID *config_id /* out */
++);
++
++/**
++ * Free resources associdated with a given config
++ */
++VAStatus vaDestroyConfig (
++ VADisplay dpy,
++ VAConfigID config_id
++);
++
++/**
++ * Query all attributes for a given configuration
++ * The profile of the configuration is returned in "profile"
++ * The entrypoint of the configuration is returned in "entrypoint"
++ * The caller must provide an "attrib_list" array that can hold at least
++ * vaMaxNumConfigAttributes() entries. The actual number of attributes
++ * returned in "attrib_list" is returned in "num_attribs"
++ */
++VAStatus vaQueryConfigAttributes (
++ VADisplay dpy,
++ VAConfigID config_id,
++ VAProfile *profile, /* out */
++ VAEntrypoint *entrypoint, /* out */
++ VAConfigAttrib *attrib_list,/* out */
++ int *num_attribs /* out */
++);
++
++
++/**
++ * Contexts and Surfaces
++ *
++ * Context represents a "virtual" video decode, encode or video processing
++ * pipeline. Surfaces are render targets for a given context. The data in the
++ * surfaces are not accessible to the client except if derived image is supported
++ * and the internal data format of the surface is implementation specific.
++ *
++ * Surfaces are provided as a hint of what surfaces will be used when the context
++ * is created through vaCreateContext(). A surface may be used by different contexts
++ * at the same time as soon as application can make sure the operations are synchronized
++ * between different contexts, e.g. a surface is used as the output of a decode context
++ * and the input of a video process context. Surfaces can only be destroyed after all
++ * contexts using these surfaces have been destroyed.
++ *
++ * Both contexts and surfaces are identified by unique IDs and its
++ * implementation specific internals are kept opaque to the clients
++ */
++
++typedef VAGenericID VAContextID;
++
++typedef VAGenericID VASurfaceID;
++
++#define VA_INVALID_ID 0xffffffff
++#define VA_INVALID_SURFACE VA_INVALID_ID
++
++/** \brief Generic value types. */
++typedef enum {
++ VAGenericValueTypeInteger = 1, /**< 32-bit signed integer. */
++ VAGenericValueTypeFloat, /**< 32-bit floating-point value. */
++ VAGenericValueTypePointer, /**< Generic pointer type */
++ VAGenericValueTypeFunc /**< Pointer to function */
++} VAGenericValueType;
++
++/** \brief Generic function type. */
++typedef void (*VAGenericFunc)(void);
++
++/** \brief Generic value. */
++typedef struct _VAGenericValue {
++ /** \brief Value type. See #VAGenericValueType. */
++ VAGenericValueType type;
++ /** \brief Value holder. */
++ union {
++ /** \brief 32-bit signed integer. */
++ int32_t i;
++ /** \brief 32-bit float. */
++ float f;
++ /** \brief Generic pointer. */
++ void *p;
++ /** \brief Pointer to function. */
++ VAGenericFunc fn;
++ } value;
++} VAGenericValue;
++
++/** @name Surface attribute flags */
++/**@{*/
++/** \brief Surface attribute is not supported. */
++#define VA_SURFACE_ATTRIB_NOT_SUPPORTED 0x00000000
++/** \brief Surface attribute can be got through vaQuerySurfaceAttributes(). */
++#define VA_SURFACE_ATTRIB_GETTABLE 0x00000001
++/** \brief Surface attribute can be set through vaCreateSurfaces(). */
++#define VA_SURFACE_ATTRIB_SETTABLE 0x00000002
++/**@}*/
++
++/** \brief Surface attribute types. */
++typedef enum {
++ VASurfaceAttribNone = 0,
++ /**
++ * \brief Pixel format (fourcc).
++ *
++ * The value is meaningful as input to vaQuerySurfaceAttributes().
++ * If zero, the driver returns the optimal pixel format for the
++ * specified config. Otherwise, if non-zero, the value represents
++ * a pixel format (FOURCC) that is kept as is on output, if the
++ * driver supports it. Otherwise, the driver sets the value to
++ * zero and drops the \c VA_SURFACE_ATTRIB_SETTABLE flag.
++ */
++ VASurfaceAttribPixelFormat,
++ /** \brief Minimal width in pixels (int, read-only). */
++ VASurfaceAttribMinWidth,
++ /** \brief Maximal width in pixels (int, read-only). */
++ VASurfaceAttribMaxWidth,
++ /** \brief Minimal height in pixels (int, read-only). */
++ VASurfaceAttribMinHeight,
++ /** \brief Maximal height in pixels (int, read-only). */
++ VASurfaceAttribMaxHeight,
++ /** \brief Surface memory type expressed in bit fields (int, read/write). */
++ VASurfaceAttribMemoryType,
++ /** \brief External buffer descriptor (pointer, write).
++ *
++ * Refer to the documentation for the memory type being created to
++ * determine what descriptor structure to pass here. If not otherwise
++ * stated, the common VASurfaceAttribExternalBuffers should be used.
++ */
++ VASurfaceAttribExternalBufferDescriptor,
++ /** \brief Surface usage hint, gives the driver a hint of intended usage
++ * to optimize allocation (e.g. tiling) (int, read/write). */
++ VASurfaceAttribUsageHint,
++ /** \brief Number of surface attributes. */
++ VASurfaceAttribCount
++} VASurfaceAttribType;
++
++/** \brief Surface attribute. */
++typedef struct _VASurfaceAttrib {
++ /** \brief Type. */
++ VASurfaceAttribType type;
++ /** \brief Flags. See "Surface attribute flags". */
++ uint32_t flags;
++ /** \brief Value. See "Surface attribute types" for the expected types. */
++ VAGenericValue value;
++} VASurfaceAttrib;
++
++/**
++ * @name VASurfaceAttribMemoryType values in bit fields.
++ * Bit 0:7 are reserved for generic types, Bit 31:28 are reserved for
++ * Linux DRM, Bit 23:20 are reserved for Android. DRM and Android specific
++ * types are defined in DRM and Android header files.
++ */
++/**@{*/
++/** \brief VA memory type (default) is supported. */
++#define VA_SURFACE_ATTRIB_MEM_TYPE_VA 0x00000001
++/** \brief V4L2 buffer memory type is supported. */
++#define VA_SURFACE_ATTRIB_MEM_TYPE_V4L2 0x00000002
++/** \brief User pointer memory type is supported. */
++#define VA_SURFACE_ATTRIB_MEM_TYPE_USER_PTR 0x00000004
++/**@}*/
++
++/**
++ * \brief VASurfaceAttribExternalBuffers structure for
++ * the VASurfaceAttribExternalBufferDescriptor attribute.
++ */
++typedef struct _VASurfaceAttribExternalBuffers {
++ /** \brief pixel format in fourcc. */
++ uint32_t pixel_format;
++ /** \brief width in pixels. */
++ uint32_t width;
++ /** \brief height in pixels. */
++ uint32_t height;
++ /** \brief total size of the buffer in bytes. */
++ uint32_t data_size;
++ /** \brief number of planes for planar layout */
++ uint32_t num_planes;
++ /** \brief pitch for each plane in bytes */
++ uint32_t pitches[4];
++ /** \brief offset for each plane in bytes */
++ uint32_t offsets[4];
++ /** \brief buffer handles or user pointers */
++ uintptr_t *buffers;
++ /** \brief number of elements in the "buffers" array */
++ uint32_t num_buffers;
++ /** \brief flags. See "Surface external buffer descriptor flags". */
++ uint32_t flags;
++ /** \brief reserved for passing private data */
++ void *private_data;
++} VASurfaceAttribExternalBuffers;
++
++/** @name VASurfaceAttribExternalBuffers flags */
++/**@{*/
++/** \brief Enable memory tiling */
++#define VA_SURFACE_EXTBUF_DESC_ENABLE_TILING 0x00000001
++/** \brief Memory is cacheable */
++#define VA_SURFACE_EXTBUF_DESC_CACHED 0x00000002
++/** \brief Memory is non-cacheable */
++#define VA_SURFACE_EXTBUF_DESC_UNCACHED 0x00000004
++/** \brief Memory is write-combined */
++#define VA_SURFACE_EXTBUF_DESC_WC 0x00000008
++/** \brief Memory is protected */
++#define VA_SURFACE_EXTBUF_DESC_PROTECTED 0x80000000
++
++/** @name VASurfaceAttribUsageHint attribute usage hint flags */
++/**@{*/
++/** \brief Surface usage not indicated. */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_GENERIC 0x00000000
++/** \brief Surface used by video decoder. */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_DECODER 0x00000001
++/** \brief Surface used by video encoder. */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_ENCODER 0x00000002
++/** \brief Surface read by video post-processing. */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_VPP_READ 0x00000004
++/** \brief Surface written by video post-processing. */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_VPP_WRITE 0x00000008
++/** \brief Surface used for display. */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_DISPLAY 0x00000010
++/** \brief Surface used for export to third-party APIs, e.g. via
++ * vaExportSurfaceHandle(). */
++#define VA_SURFACE_ATTRIB_USAGE_HINT_EXPORT 0x00000020
++
++/**@}*/
++
++/**
++ * \brief Queries surface attributes for the supplied config.
++ *
++ * This function queries for all supported attributes for the
++ * supplied VA @config. In particular, if the underlying hardware
++ * supports the creation of VA surfaces in various formats, then
++ * this function will enumerate all pixel formats that are supported.
++ *
++ * The \c attrib_list array is allocated by the user and \c
++ * num_attribs shall be initialized to the number of allocated
++ * elements in that array. Upon successful return, the actual number
++ * of attributes will be overwritten into \c num_attribs. Otherwise,
++ * \c VA_STATUS_ERROR_MAX_NUM_EXCEEDED is returned and \c num_attribs
++ * is adjusted to the number of elements that would be returned if
++ * enough space was available.
++ *
++ * Note: it is perfectly valid to pass NULL to the \c attrib_list
++ * argument when vaQuerySurfaceAttributes() is used to determine the
++ * actual number of elements that need to be allocated.
++ *
++ * @param[in] dpy the VA display
++ * @param[in] config the config identifying a codec or a video
++ * processing pipeline
++ * @param[out] attrib_list the output array of #VASurfaceAttrib elements
++ * @param[in,out] num_attribs the number of elements allocated on
++ * input, the number of elements actually filled in output
++ */
++VAStatus
++vaQuerySurfaceAttributes(
++ VADisplay dpy,
++ VAConfigID config,
++ VASurfaceAttrib *attrib_list,
++ unsigned int *num_attribs
++);
++
++/**
++ * \brief Creates an array of surfaces
++ *
++ * Creates an array of surfaces. The optional list of attributes shall
++ * be constructed based on what the underlying hardware could expose
++ * through vaQuerySurfaceAttributes().
++ *
++ * @param[in] dpy the VA display
++ * @param[in] format the desired surface format. See \c VA_RT_FORMAT_*
++ * @param[in] width the surface width
++ * @param[in] height the surface height
++ * @param[out] surfaces the array of newly created surfaces
++ * @param[in] num_surfaces the number of surfaces to create
++ * @param[in] attrib_list the list of (optional) attributes, or \c NULL
++ * @param[in] num_attribs the number of attributes supplied in
++ * \c attrib_list, or zero
++ */
++VAStatus
++vaCreateSurfaces(
++ VADisplay dpy,
++ unsigned int format,
++ unsigned int width,
++ unsigned int height,
++ VASurfaceID *surfaces,
++ unsigned int num_surfaces,
++ VASurfaceAttrib *attrib_list,
++ unsigned int num_attribs
++);
++
++/**
++ * vaDestroySurfaces - Destroy resources associated with surfaces.
++ * Surfaces can only be destroyed after all contexts using these surfaces have been
++ * destroyed.
++ * dpy: display
++ * surfaces: array of surfaces to destroy
++ * num_surfaces: number of surfaces in the array to be destroyed.
++ */
++VAStatus vaDestroySurfaces (
++ VADisplay dpy,
++ VASurfaceID *surfaces,
++ int num_surfaces
++);
++
++#define VA_PROGRESSIVE 0x1
++/**
++ * vaCreateContext - Create a context
++ * dpy: display
++ * config_id: configuration for the context
++ * picture_width: coded picture width
++ * picture_height: coded picture height
++ * flag: any combination of the following:
++ * VA_PROGRESSIVE (only progressive frame pictures in the sequence when set)
++ * render_targets: a hint for render targets (surfaces) tied to the context
++ * num_render_targets: number of render targets in the above array
++ * context: created context id upon return
++ */
++VAStatus vaCreateContext (
++ VADisplay dpy,
++ VAConfigID config_id,
++ int picture_width,
++ int picture_height,
++ int flag,
++ VASurfaceID *render_targets,
++ int num_render_targets,
++ VAContextID *context /* out */
++);
++
++/**
++ * vaDestroyContext - Destroy a context
++ * dpy: display
++ * context: context to be destroyed
++ */
++VAStatus vaDestroyContext (
++ VADisplay dpy,
++ VAContextID context
++);
++
++//Multi-frame context
++typedef VAGenericID VAMFContextID;
++/**
++ * vaCreateMFContext - Create a multi-frame context
++ * interface encapsulating common for all streams memory objects and structures
++ * required for single GPU task submission from several VAContextID's.
++ * Allocation: This call only creates an instance, doesn't allocate any additional memory.
++ * Support identification: Application can identify multi-frame feature support by ability
++ * to create multi-frame context. If driver supports multi-frame - call successful,
++ * mf_context != NULL and VAStatus = VA_STATUS_SUCCESS, otherwise if multi-frame processing
++ * not supported driver returns VA_STATUS_ERROR_UNIMPLEMENTED and mf_context = NULL.
++ * return values:
++ * VA_STATUS_SUCCESS - operation successful.
++ * VA_STATUS_ERROR_UNIMPLEMENTED - no support for multi-frame.
++ * dpy: display adapter.
++ * mf_context: Multi-Frame context encapsulating all associated context
++ * for multi-frame submission.
++ */
++VAStatus vaCreateMFContext (
++ VADisplay dpy,
++ VAMFContextID *mf_context /* out */
++);
++
++/**
++ * vaMFAddContext - Provide ability to associate each context used for
++ * Multi-Frame submission and common Multi-Frame context.
++ * Try to add context to understand if it is supported.
++ * Allocation: this call allocates and/or reallocates all memory objects
++ * common for all contexts associated with particular Multi-Frame context.
++ * All memory required for each context(pixel buffers, internal driver
++ * buffers required for processing) allocated during standard vaCreateContext call for each context.
++ * Runtime dependency - if current implementation doesn't allow to run different entry points/profile,
++ * first context added will set entry point/profile for whole Multi-Frame context,
++ * all other entry points and profiles can be rejected to be added.
++ * Return values:
++ * VA_STATUS_SUCCESS - operation successful, context was added.
++ * VA_STATUS_ERROR_OPERATION_FAILED - something unexpected happened - application have to close
++ * current mf_context and associated contexts and start working with new ones.
++ * VA_STATUS_ERROR_INVALID_CONTEXT - ContextID is invalid, means:
++ * 1 - mf_context is not valid context or
++ * 2 - driver can't suport different VAEntrypoint or VAProfile simultaneosly
++ * and current context contradicts with previously added, application can continue with current mf_context
++ * and other contexts passed this call, rejected context can continue work in stand-alone
++ * mode or other mf_context.
++ * VA_STATUS_ERROR_UNSUPPORTED_ENTRYPOINT - particular context being added was created with with
++ * unsupported VAEntrypoint. Application can continue with current mf_context
++ * and other contexts passed this call, rejected context can continue work in stand-alone
++ * mode.
++ * VA_STATUS_ERROR_UNSUPPORTED_PROFILE - Current context with Particular VAEntrypoint is supported
++ * but VAProfile is not supported. Application can continue with current mf_context
++ * and other contexts passed this call, rejected context can continue work in stand-alone
++ * mode.
++ * dpy: display adapter.
++ * context: context being associated with Multi-Frame context.
++ * mf_context: - multi-frame context used to associate contexts for multi-frame submission.
++ */
++VAStatus vaMFAddContext (
++ VADisplay dpy,
++ VAMFContextID mf_context,
++ VAContextID context
++);
++
++/**
++ * vaMFReleaseContext - Removes context from multi-frame and
++ * association with multi-frame context.
++ * After association removed vaEndPicture will submit tasks, but not vaMFSubmit.
++ * Return values:
++ * VA_STATUS_SUCCESS - operation successful, context was removed.
++ * VA_STATUS_ERROR_OPERATION_FAILED - something unexpected happened.
++ * application need to destroy this VAMFContextID and all assotiated VAContextID
++ * dpy: display
++ * mf_context: VAMFContextID where context is added
++ * context: VAContextID to be added
++ */
++VAStatus vaMFReleaseContext (
++ VADisplay dpy,
++ VAMFContextID mf_context,
++ VAContextID context
++);
++
++/**
++ * Buffers
++ * Buffers are used to pass various types of data from the
++ * client to the server. The server maintains a data store
++ * for each buffer created, and the client idenfies a buffer
++ * through a unique buffer id assigned by the server.
++ */
++
++typedef VAGenericID VABufferID;
++
++typedef enum
++{
++ VAPictureParameterBufferType = 0,
++ VAIQMatrixBufferType = 1,
++ VABitPlaneBufferType = 2,
++ VASliceGroupMapBufferType = 3,
++ VASliceParameterBufferType = 4,
++ VASliceDataBufferType = 5,
++ VAMacroblockParameterBufferType = 6,
++ VAResidualDataBufferType = 7,
++ VADeblockingParameterBufferType = 8,
++ VAImageBufferType = 9,
++ VAProtectedSliceDataBufferType = 10,
++ VAQMatrixBufferType = 11,
++ VAHuffmanTableBufferType = 12,
++ VAProbabilityBufferType = 13,
++
++/* Following are encode buffer types */
++ VAEncCodedBufferType = 21,
++ VAEncSequenceParameterBufferType = 22,
++ VAEncPictureParameterBufferType = 23,
++ VAEncSliceParameterBufferType = 24,
++ VAEncPackedHeaderParameterBufferType = 25,
++ VAEncPackedHeaderDataBufferType = 26,
++ VAEncMiscParameterBufferType = 27,
++ VAEncMacroblockParameterBufferType = 28,
++ VAEncMacroblockMapBufferType = 29,
++
++ /**
++ * \brief Encoding QP buffer
++ *
++ * This buffer contains QP per MB for encoding. Currently
++ * VAEncQPBufferH264 is defined for H.264 encoding, see
++ * #VAEncQPBufferH264 for details
++ */
++ VAEncQPBufferType = 30,
++/* Following are video processing buffer types */
++ /**
++ * \brief Video processing pipeline parameter buffer.
++ *
++ * This buffer describes the video processing pipeline. See
++ * #VAProcPipelineParameterBuffer for details.
++ */
++ VAProcPipelineParameterBufferType = 41,
++ /**
++ * \brief Video filter parameter buffer.
++ *
++ * This buffer describes the video filter parameters. All buffers
++ * inherit from #VAProcFilterParameterBufferBase, thus including
++ * a unique filter buffer type.
++ *
++ * The default buffer used by most filters is #VAProcFilterParameterBuffer.
++ * Filters requiring advanced parameters include, but are not limited to,
++ * deinterlacing (#VAProcFilterParameterBufferDeinterlacing),
++ * color balance (#VAProcFilterParameterBufferColorBalance), etc.
++ */
++ VAProcFilterParameterBufferType = 42,
++ /**
++ * \brief FEI specific buffer types
++ */
++ VAEncFEIMVBufferType = 43,
++ VAEncFEIMBCodeBufferType = 44,
++ VAEncFEIDistortionBufferType = 45,
++ VAEncFEIMBControlBufferType = 46,
++ VAEncFEIMVPredictorBufferType = 47,
++ VAStatsStatisticsParameterBufferType = 48,
++ /** \brief Statistics output for VAEntrypointStats progressive and top field of interlaced case*/
++ VAStatsStatisticsBufferType = 49,
++ /** \brief Statistics output for VAEntrypointStats bottom field of interlaced case*/
++ VAStatsStatisticsBottomFieldBufferType = 50,
++ VAStatsMVBufferType = 51,
++ VAStatsMVPredictorBufferType = 52,
++ /** Force MB's to be non skip for encode.it's per-mb control buffer, The width of the MB map
++ * Surface is (width of the Picture in MB unit) * 1 byte, multiple of 64 bytes.
++ * The height is (height of the picture in MB unit). The picture is either
++ * frame or non-interleaved top or bottom field. If the application provides this
++ *surface, it will override the "skipCheckDisable" setting in VAEncMiscParameterEncQuality.
++ */
++ VAEncMacroblockDisableSkipMapBufferType = 53,
++ /**
++ * \brief HEVC FEI CTB level cmd buffer
++ * it is CTB level information for future usage.
++ */
++ VAEncFEICTBCmdBufferType = 54,
++ /**
++ * \brief HEVC FEI CU level data buffer
++ * it's CTB level information for future usage
++ */
++ VAEncFEICURecordBufferType = 55,
++ /** decode stream out buffer, intermedia data of decode, it may include MV, MB mode etc.
++ * it can be used to detect motion and analyze the frame contain */
++ VADecodeStreamoutBufferType = 56,
++
++ /** \brief HEVC Decoding Subset Parameter buffer type
++ *
++ * The subsets parameter buffer is concatenation with one or multiple
++ * subset entry point offsets. All the offset values are layed out one
++ * by one according to slice order with first slice segment first, second
++ * slice segment second, etc... The entry number is indicated by parameter
++ * \ref num_entry_point_offsets. And the first entry position of the entry
++ * point offsets for any slice segment is indicated by parameter
++ * entry_offset_to_subset_array in VAPictureParameterBufferHEVC data structure.
++ */
++ VASubsetsParameterBufferType = 57,
++
++ VABufferTypeMax
++} VABufferType;
++
++/**
++ * Processing rate parameter for encode.
++ */
++typedef struct _VAProcessingRateParameterEnc {
++ /** \brief Profile level */
++ uint8_t level_idc;
++ uint8_t reserved[3];
++ /** \brief quality level. When set to 0, default quality
++ * level is used.
++ */
++ uint32_t quality_level;
++ /** \brief Period between I frames. */
++ uint32_t intra_period;
++ /** \brief Period between I/P frames. */
++ uint32_t ip_period;
++} VAProcessingRateParameterEnc;
++
++/**
++ * Processing rate parameter for decode.
++ */
++typedef struct _VAProcessingRateParameterDec {
++ /** \brief Profile level */
++ uint8_t level_idc;
++ uint8_t reserved0[3];
++ uint32_t reserved;
++} VAProcessingRateParameterDec;
++
++typedef struct _VAProcessingRateParameter {
++ union {
++ VAProcessingRateParameterEnc proc_buf_enc;
++ VAProcessingRateParameterDec proc_buf_dec;
++ };
++} VAProcessingRateParameter;
++
++/**
++ * \brief Queries processing rate for the supplied config.
++ *
++ * This function queries the processing rate based on parameters in
++ * \c proc_buf for the given \c config. Upon successful return, the processing
++ * rate value will be stored in \c processing_rate. Processing rate is
++ * specified as the number of macroblocks/CTU per second.
++ *
++ * If NULL is passed to the \c proc_buf, the default processing rate for the
++ * given configuration will be returned.
++ *
++ * @param[in] dpy the VA display
++ * @param[in] config the config identifying a codec or a video
++ * processing pipeline
++ * @param[in] proc_buf the buffer that contains the parameters for
++ either the encode or decode processing rate
++ * @param[out] processing_rate processing rate in number of macroblocks per
++ second constrained by parameters specified in proc_buf
++ *
++ */
++VAStatus
++vaQueryProcessingRate(
++ VADisplay dpy,
++ VAConfigID config,
++ VAProcessingRateParameter *proc_buf,
++ unsigned int *processing_rate
++);
++
++typedef enum
++{
++ VAEncMiscParameterTypeFrameRate = 0,
++ VAEncMiscParameterTypeRateControl = 1,
++ VAEncMiscParameterTypeMaxSliceSize = 2,
++ VAEncMiscParameterTypeAIR = 3,
++ /** \brief Buffer type used to express a maximum frame size (in bits). */
++ VAEncMiscParameterTypeMaxFrameSize = 4,
++ /** \brief Buffer type used for HRD parameters. */
++ VAEncMiscParameterTypeHRD = 5,
++ VAEncMiscParameterTypeQualityLevel = 6,
++ /** \brief Buffer type used for Rolling intra refresh */
++ VAEncMiscParameterTypeRIR = 7,
++ /** \brief Buffer type used for quantization parameters, it's per-sequence parameter*/
++ VAEncMiscParameterTypeQuantization = 8,
++ /** \brief Buffer type used for sending skip frame parameters to the encoder's
++ * rate control, when the user has externally skipped frames. */
++ VAEncMiscParameterTypeSkipFrame = 9,
++ /** \brief Buffer type used for region-of-interest (ROI) parameters. */
++ VAEncMiscParameterTypeROI = 10,
++ /** \brief Buffer type used to express a maximum frame size (in bytes) settings for multiple pass. */
++ VAEncMiscParameterTypeMultiPassFrameSize = 11,
++ /** \brief Buffer type used for temporal layer structure */
++ VAEncMiscParameterTypeTemporalLayerStructure = 12,
++ /** \brief Buffer type used for dirty region-of-interest (ROI) parameters. */
++ VAEncMiscParameterTypeDirtyRect = 13,
++ /** \brief Buffer type used for parallel BRC parameters. */
++ VAEncMiscParameterTypeParallelBRC = 14,
++ /** \brief Set MB partion mode mask and Half-pel/Quant-pel motion search */
++ VAEncMiscParameterTypeSubMbPartPel = 15,
++ /** \brief set encode quality tuning */
++ VAEncMiscParameterTypeEncQuality = 16,
++ /** \brief Buffer type used for encoder rounding offset parameters. */
++ VAEncMiscParameterTypeCustomRoundingControl = 17,
++ /** \brief Buffer type used for FEI input frame level parameters */
++ VAEncMiscParameterTypeFEIFrameControl = 18,
++ /** \brief encode extension buffer, ect. MPEG2 Sequence extenstion data */
++ VAEncMiscParameterTypeExtensionData = 19
++} VAEncMiscParameterType;
++
++/** \brief Packed header type. */
++typedef enum {
++ /** \brief Packed sequence header. */
++ VAEncPackedHeaderSequence = 1,
++ /** \brief Packed picture header. */
++ VAEncPackedHeaderPicture = 2,
++ /** \brief Packed slice header. */
++ VAEncPackedHeaderSlice = 3,
++ /**
++ * \brief Packed raw header.
++ *
++ * Packed raw data header can be used by the client to insert a header
++ * into the bitstream data buffer at the point it is passed, the driver
++ * will handle the raw packed header based on "has_emulation_bytes" field
++ * in the packed header parameter structure.
++ */
++ VAEncPackedHeaderRawData = 4,
++ /**
++ * \brief Misc packed header. See codec-specific definitions.
++ *
++ * @deprecated
++ * This is a deprecated packed header type. All applications can use
++ * \c VAEncPackedHeaderRawData to insert a codec-specific packed header
++ */
++ VAEncPackedHeaderMiscMask va_deprecated_enum = 0x80000000,
++} VAEncPackedHeaderType;
++
++/** \brief Packed header parameter. */
++typedef struct _VAEncPackedHeaderParameterBuffer {
++ /** Type of the packed header buffer. See #VAEncPackedHeaderType. */
++ uint32_t type;
++ /** \brief Size of the #VAEncPackedHeaderDataBuffer in bits. */
++ uint32_t bit_length;
++ /** \brief Flag: buffer contains start code emulation prevention bytes? */
++ uint8_t has_emulation_bytes;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncPackedHeaderParameterBuffer;
++
++/**
++ * For application, e.g. set a new bitrate
++ * VABufferID buf_id;
++ * VAEncMiscParameterBuffer *misc_param;
++ * VAEncMiscParameterRateControl *misc_rate_ctrl;
++ *
++ * vaCreateBuffer(dpy, context, VAEncMiscParameterBufferType,
++ * sizeof(VAEncMiscParameterBuffer) + sizeof(VAEncMiscParameterRateControl),
++ * 1, NULL, &buf_id);
++ *
++ * vaMapBuffer(dpy,buf_id,(void **)&misc_param);
++ * misc_param->type = VAEncMiscParameterTypeRateControl;
++ * misc_rate_ctrl= (VAEncMiscParameterRateControl *)misc_param->data;
++ * misc_rate_ctrl->bits_per_second = 6400000;
++ * vaUnmapBuffer(dpy, buf_id);
++ * vaRenderPicture(dpy, context, &buf_id, 1);
++ */
++typedef struct _VAEncMiscParameterBuffer
++{
++ VAEncMiscParameterType type;
++ uint32_t data[];
++} VAEncMiscParameterBuffer;
++
++/** \brief Temporal layer Structure*/
++typedef struct _VAEncMiscParameterTemporalLayerStructure
++{
++ /** \brief The number of temporal layers */
++ uint32_t number_of_layers;
++ /** \brief The length of the array defining frame layer membership. Should be 1-32 */
++ uint32_t periodicity;
++ /**
++ * \brief The array indicating the layer id for each frame
++ *
++ * The layer id for the first frame in a coded sequence is always 0, so layer_id[] specifies the layer
++ * ids for frames starting from the 2nd frame.
++ */
++ uint32_t layer_id[32];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterTemporalLayerStructure;
++
++
++/** \brief Rate control parameters */
++typedef struct _VAEncMiscParameterRateControl
++{
++ /** The maximum bit-rate which the the rate controller should generate. */
++ uint32_t bits_per_second;
++ /** The target bit-rate which the rate controller should generate, as a percentage of the
++ * maximum bit-rate.
++ *
++ * In CBR mode this value is ignored (treated as 100%).
++ */
++ uint32_t target_percentage;
++ /** Rate control window size in milliseconds.
++ *
++ * The rate controller will attempt to guarantee that the target and maximum bit-rates are
++ * correct over this window.
++ */
++ uint32_t window_size;
++ /** Initial quantiser value used at the start of the stream.
++ *
++ * Ignored if set to zero.
++ */
++ uint32_t initial_qp;
++ /** Minimum quantiser value to use.
++ *
++ * The quantiser will not go below the value - if this limit is hit, the output bitrate may
++ * be lower than the target. Ignored if set to zero.
++ */
++ uint32_t min_qp;
++ /** Basic unit size.
++ *
++ * Only used by some drivers - see driver documentation for details. Set to zero if unused.
++ */
++ uint32_t basic_unit_size;
++ union
++ {
++ struct
++ {
++ /** Force rate controller reset.
++ *
++ * The next frame will be treated as the start of a new stream, with all rate
++ * controller state reset to its initial values.
++ */
++ uint32_t reset : 1;
++ /** Disable frame skip in rate control mode. */
++ uint32_t disable_frame_skip : 1;
++ /** Disable bit stuffing in rate control mode. */
++ uint32_t disable_bit_stuffing : 1;
++ /** Macroblock-level rate control.
++ *
++ * 0: use default, 1: always enable, 2: always disable, other: reserved.
++ *
++ * This feature is only available if VAConfigAttribRateControl has the
++ * \ref VA_RC_MB bit set.
++ */
++ uint32_t mb_rate_control : 4;
++ /** The temporal layer that these rate control parameters apply to. */
++ uint32_t temporal_id : 8;
++ /** Ensure that intra frames also conform to the constant frame size. */
++ uint32_t cfs_I_frames : 1;
++ /** Enable parallel rate control for hierarchical B frames.
++ *
++ * See \ref VA_RC_PARALLEL.
++ */
++ uint32_t enable_parallel_brc : 1;
++ uint32_t enable_dynamic_scaling : 1;
++ /** Frame tolerance mode.
++ *
++ * Indicates the tolerance the application has to variations in the frame size.
++ * For example, wireless display scenarios may require very steady bit rate to
++ * reduce buffering time. It affects the rate control algorithm used,
++ * but may or may not have an effect based on the combination of other BRC
++ * parameters. Only valid when the driver reports support for
++ * #VAConfigAttribFrameSizeToleranceSupport.
++ *
++ * equals 0 -- normal mode;
++ * equals 1 -- maps to sliding window;
++ * equals 2 -- maps to low delay mode;
++ * other -- invalid.
++ */
++ uint32_t frame_tolerance_mode : 2;
++ /** Reserved for future use, must be zero. */
++ uint32_t reserved : 12;
++ } bits;
++ uint32_t value;
++ } rc_flags;
++ /** Initial quality factor used in ICQ mode.
++ *
++ * This value must be between 1 and 51.
++ * this value will be deprecated in future, to use quality_factor instead of it.
++ */
++ uint32_t ICQ_quality_factor;
++ /** Maximum quantiser value to use.
++ *
++ * The quantiser will not go above this value - if this limit is hit, the output bitrate
++ * may exceed the target. Ignored if set to zero.
++ */
++ uint32_t max_qp;
++ /** Quality factor
++ *
++ * the range will be different for different codec
++ */
++ uint32_t quality_factor;
++ /** Reserved bytes for future use, must be zero. */
++ uint32_t va_reserved[VA_PADDING_MEDIUM - 3];
++} VAEncMiscParameterRateControl;
++
++/** Encode framerate parameters.
++ *
++ * Sets the encode framerate used by the rate controller. This should be
++ * provided in all modes using a bitrate target (variable framerate is not
++ * supported).
++ */
++typedef struct _VAEncMiscParameterFrameRate
++{
++ /** Encode framerate.
++ *
++ * The framerate is specified as a number of frames per second, as a
++ * fraction. The denominator of the fraction is given in the top half
++ * (the high two bytes) of the framerate field, and the numerator is
++ * given in the bottom half (the low two bytes).
++ *
++ * That is:
++ * denominator = framerate >> 16 & 0xffff;
++ * numerator = framerate & 0xffff;
++ * fps = numerator / denominator;
++ *
++ * For example, if framerate is set to (100 << 16 | 750), this is
++ * 750 / 100, hence 7.5fps.
++ *
++ * If the denominator is zero (the high two bytes are both zero) then
++ * it takes the value one instead, so the framerate is just the integer
++ * in the low 2 bytes.
++ */
++ uint32_t framerate;
++ union
++ {
++ struct
++ {
++ /** The temporal layer that these framerate parameters apply to. */
++ uint32_t temporal_id : 8;
++ /** Reserved for future use, must be zero. */
++ uint32_t reserved : 24;
++ } bits;
++ uint32_t value;
++ } framerate_flags;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterFrameRate;
++
++/**
++ * Allow a maximum slice size to be specified (in bits).
++ * The encoder will attempt to make sure that individual slices do not exceed this size
++ * Or to signal applicate if the slice size exceed this size, see "status" of VACodedBufferSegment
++ */
++typedef struct _VAEncMiscParameterMaxSliceSize
++{
++ uint32_t max_slice_size;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterMaxSliceSize;
++
++typedef struct _VAEncMiscParameterAIR
++{
++ uint32_t air_num_mbs;
++ uint32_t air_threshold;
++ uint32_t air_auto; /* if set to 1 then hardware auto-tune the AIR threshold */
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterAIR;
++
++/*
++ * \brief Rolling intra refresh data structure for encoding.
++ */
++typedef struct _VAEncMiscParameterRIR
++{
++ union
++ {
++ struct
++ /**
++ * \brief Indicate if intra refresh is enabled in column/row.
++ *
++ * App should query VAConfigAttribEncIntraRefresh to confirm RIR support
++ * by the driver before sending this structure.
++ */
++ {
++ /* \brief enable RIR in column */
++ uint32_t enable_rir_column : 1;
++ /* \brief enable RIR in row */
++ uint32_t enable_rir_row : 1;
++ uint32_t reserved : 30;
++ } bits;
++ uint32_t value;
++ } rir_flags;
++ /**
++ * \brief Indicates the column or row location in MB. It is ignored if
++ * rir_flags is 0.
++ */
++ uint16_t intra_insertion_location;
++ /**
++ * \brief Indicates the number of columns or rows in MB. It is ignored if
++ * rir_flags is 0.
++ */
++ uint16_t intra_insert_size;
++ /**
++ * \brief indicates the Qp difference for inserted intra columns or rows.
++ * App can use this to adjust intra Qp based on bitrate & max frame size.
++ */
++ uint8_t qp_delta_for_inserted_intra;
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterRIR;
++
++/** HRD / VBV buffering parameters for encoding.
++ *
++ * This sets the HRD / VBV parameters which will be used by the rate
++ * controller for encoding. It should be specified in modes using a bitrate
++ * target when the buffering of the output stream needs to be constrained.
++ *
++ * If not provided, the encoder may use arbitrary amounts of buffering.
++ */
++typedef struct _VAEncMiscParameterHRD
++{
++ /** The initial fullness of the HRD coded picture buffer, in bits.
++ *
++ * This sets how full the CPB is when encoding begins - that is, how much
++ * buffering will happen on the decoder side before the first frame.
++ * The CPB fullness will be reset to this value after any rate control
++ * reset (a change in parameters or an explicit reset).
++ *
++ * For H.264, it should match the value of initial_cpb_removal_delay in
++ * buffering_period SEI messages.
++ */
++ uint32_t initial_buffer_fullness;
++ /** The HRD coded picture buffer size, in bits.
++ *
++ * For H.264, it should match the value of cpb_size_value_minus1 in the VUI
++ * parameters.
++ */
++ uint32_t buffer_size;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterHRD;
++
++/**
++ * \brief Defines a maximum frame size (in bits).
++ *
++ * This misc parameter buffer defines the maximum size of a frame (in
++ * bits). The encoder will try to make sure that each frame does not
++ * exceed this size. Otherwise, if the frame size exceeds this size,
++ * the \c status flag of #VACodedBufferSegment will contain
++ * #VA_CODED_BUF_STATUS_FRAME_SIZE_OVERFLOW.
++ */
++typedef struct _VAEncMiscParameterBufferMaxFrameSize {
++ /** \brief Type. Shall be set to #VAEncMiscParameterTypeMaxFrameSize. */
++ /** duplicated with VAEncMiscParameterBuffer, should be deprecated*/
++ va_deprecated VAEncMiscParameterType type;
++ /** \brief Maximum size of a frame (in bits). */
++ uint32_t max_frame_size;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterBufferMaxFrameSize;
++
++/**
++ * \brief Maximum frame size (in bytes) settings for multiple pass.
++ *
++ * This misc parameter buffer defines the maximum size of a frame (in
++ * bytes) settings for multiple pass. currently only AVC encoder can
++ * support this settings in multiple pass case. If the frame size exceeds
++ * this size, the encoder will do more pak passes to adjust the QP value
++ * to control the frame size.
++ */
++typedef struct _VAEncMiscParameterBufferMultiPassFrameSize {
++ /** \brief Type. Shall be set to #VAEncMiscParameterTypeMultiPassMaxFrameSize. */
++ /** duplicated with VAEncMiscParameterBuffer, should be deprecated*/
++ va_deprecated VAEncMiscParameterType type;
++ /** \brief Maximum size of a frame (in byte) */
++ uint32_t max_frame_size;
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t reserved;
++ /** \brief number of passes, every pass has different QP, currently AVC encoder can support up to 4 passes */
++ uint8_t num_passes;
++ /** \brief delta QP list for every pass */
++ uint8_t *delta_qp;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ unsigned long va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterBufferMultiPassFrameSize;
++
++/**
++ * \brief Encoding quality level.
++ *
++ * The encoding quality could be set through this structure, if the implementation
++ * supports multiple quality levels. The quality level set through this structure is
++ * persistent over the entire coded sequence, or until a new structure is being sent.
++ * The quality level range can be queried through the VAConfigAttribEncQualityRange
++ * attribute. A lower value means higher quality, and a value of 1 represents the highest
++ * quality. The quality level setting is used as a trade-off between quality and speed/power
++ * consumption, with higher quality corresponds to lower speed and higher power consumption.
++ */
++typedef struct _VAEncMiscParameterBufferQualityLevel {
++ /** \brief Encoding quality level setting. When set to 0, default quality
++ * level is used.
++ */
++ uint32_t quality_level;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterBufferQualityLevel;
++
++/**
++ * \brief Quantization settings for encoding.
++ *
++ * Some encoders support special types of quantization such as trellis, and this structure
++ * can be used by the app to control these special types of quantization by the encoder.
++ */
++typedef struct _VAEncMiscParameterQuantization
++{
++ union
++ {
++ /* if no flags is set then quantization is determined by the driver */
++ struct
++ {
++ /* \brief disable trellis for all frames/fields */
++ uint32_t disable_trellis : 1;
++ /* \brief enable trellis for I frames/fields */
++ uint32_t enable_trellis_I : 1;
++ /* \brief enable trellis for P frames/fields */
++ uint32_t enable_trellis_P : 1;
++ /* \brief enable trellis for B frames/fields */
++ uint32_t enable_trellis_B : 1;
++ uint32_t reserved : 28;
++ } bits;
++ uint32_t value;
++ } quantization_flags;
++ uint32_t va_reserved;
++} VAEncMiscParameterQuantization;
++
++/**
++ * \brief Encoding skip frame.
++ *
++ * The application may choose to skip frames externally to the encoder (e.g. drop completely or
++ * code as all skip's). For rate control purposes the encoder will need to know the size and number
++ * of skipped frames. Skip frame(s) indicated through this structure is applicable only to the
++ * current frame. It is allowed for the application to still send in packed headers for the driver to
++ * pack, although no frame will be encoded (e.g. for HW to encrypt the frame).
++ */
++typedef struct _VAEncMiscParameterSkipFrame {
++ /** \brief Indicates skip frames as below.
++ * 0: Encode as normal, no skip.
++ * 1: One or more frames were skipped prior to the current frame, encode the current frame as normal.
++ * 2: The current frame is to be skipped, do not encode it but pack/encrypt the packed header contents
++ * (all except VAEncPackedHeaderSlice) which could contain actual frame contents (e.g. pack the frame
++ * in VAEncPackedHeaderPicture). */
++ uint8_t skip_frame_flag;
++ /** \brief The number of frames skipped prior to the current frame. Valid when skip_frame_flag = 1. */
++ uint8_t num_skip_frames;
++ /** \brief When skip_frame_flag = 1, the size of the skipped frames in bits. When skip_frame_flag = 2,
++ * the size of the current skipped frame that is to be packed/encrypted in bits. */
++ uint32_t size_skip_frames;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterSkipFrame;
++
++/**
++ * \brief Encoding region-of-interest (ROI).
++ *
++ * The encoding ROI can be set through VAEncMiscParameterBufferROI, if the implementation
++ * supports ROI input. The ROI set through this structure is applicable only to the
++ * current frame or field, so must be sent every frame or field to be applied. The number of
++ * supported ROIs can be queried through the VAConfigAttribEncROI. The encoder will use the
++ * ROI information to adjust the QP values of the MB's that fall within the ROIs.
++ */
++typedef struct _VAEncROI
++{
++ /** \brief Defines the ROI boundary in pixels, the driver will map it to appropriate
++ * codec coding units. It is relative to frame coordinates for the frame case and
++ * to field coordinates for the field case. */
++ VARectangle roi_rectangle;
++ /**
++ * \brief ROI value
++ *
++ * \ref roi_value specifies ROI delta QP or ROI priority.
++ * -- ROI delta QP is the value that will be added on top of the frame level QP.
++ * -- ROI priority specifies the priority of a region, it can be positive (more important)
++ * or negative (less important) values and is compared with non-ROI region (taken as value 0),
++ * E.g. ROI region with \ref roi_value -3 is less important than the non-ROI region (\ref roi_value
++ * implied to be 0) which is less important than ROI region with roi_value +2. For overlapping
++ * regions, the roi_value that is first in the ROI array will have priority.
++ *
++ * \ref roi_value always specifes ROI delta QP when VAConfigAttribRateControl == VA_RC_CQP, no matter
++ * the value of \c roi_value_is_qp_delta in #VAEncMiscParameterBufferROI.
++ *
++ * \ref roi_value depends on \c roi_value_is_qp_delta in #VAEncMiscParameterBufferROI when
++ * VAConfigAttribRateControl != VA_RC_CQP. \ref roi_value specifies ROI_delta QP if \c roi_value_is_qp_delta
++ * in VAEncMiscParameterBufferROI is 1, otherwise \ref roi_value specifies ROI priority.
++ */
++ int8_t roi_value;
++} VAEncROI;
++
++typedef struct _VAEncMiscParameterBufferROI {
++ /** \brief Number of ROIs being sent.*/
++ uint32_t num_roi;
++
++ /** \brief Valid when VAConfigAttribRateControl != VA_RC_CQP, then the encoder's
++ * rate control will determine actual delta QPs. Specifies the max/min allowed delta
++ * QPs. */
++ int8_t max_delta_qp;
++ int8_t min_delta_qp;
++
++ /** \brief Pointer to a VAEncROI array with num_roi elements. It is relative to frame
++ * coordinates for the frame case and to field coordinates for the field case.*/
++ VAEncROI *roi;
++ union {
++ struct {
++ /**
++ * \brief An indication for roi value.
++ *
++ * \ref roi_value_is_qp_delta equal to 1 indicates \c roi_value in #VAEncROI should
++ * be used as ROI delta QP. \ref roi_value_is_qp_delta equal to 0 indicates \c roi_value
++ * in #VAEncROI should be used as ROI priority.
++ *
++ * \ref roi_value_is_qp_delta is only available when VAConfigAttribRateControl != VA_RC_CQP,
++ * the setting must comply with \c roi_rc_priority_support and \c roi_rc_qp_delta_support in
++ * #VAConfigAttribValEncROI. The underlying driver should ignore this field
++ * when VAConfigAttribRateControl == VA_RC_CQP.
++ */
++ uint32_t roi_value_is_qp_delta : 1;
++ uint32_t reserved : 31;
++ } bits;
++ uint32_t value;
++ } roi_flags;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncMiscParameterBufferROI;
++/*
++ * \brief Dirty rectangle data structure for encoding.
++ *
++ * The encoding dirty rect can be set through VAEncMiscParameterBufferDirtyRect, if the
++ * implementation supports dirty rect input. The rect set through this structure is applicable
++ * only to the current frame or field, so must be sent every frame or field to be applied.
++ * The number of supported rects can be queried through the VAConfigAttribEncDirtyRect. The
++ * encoder will use the rect information to know those rectangle areas have changed while the
++ * areas not covered by dirty rect rectangles are assumed to have not changed compared to the
++ * previous picture. The encoder may do some internal optimizations.
++ */
++typedef struct _VAEncMiscParameterBufferDirtyRect
++{
++ /** \brief Number of Rectangle being sent.*/
++ uint32_t num_roi_rectangle;
++
++ /** \brief Pointer to a VARectangle array with num_roi_rectangle elements.*/
++ VARectangle *roi_rectangle;
++} VAEncMiscParameterBufferDirtyRect;
++
++/** \brief Attribute value for VAConfigAttribEncParallelRateControl */
++typedef struct _VAEncMiscParameterParallelRateControl {
++ /** brief Number of layers*/
++ uint32_t num_layers;
++ /** brief Number of B frames per layer per GOP.
++ *
++ * it should be allocated by application, and the is num_layers.
++ * num_b_in_gop[0] is the number of regular B which refers to only I or P frames. */
++ uint32_t *num_b_in_gop;
++} VAEncMiscParameterParallelRateControl;
++
++/** per frame encoder quality controls, once set they will persist for all future frames
++ *till it is updated again. */
++typedef struct _VAEncMiscParameterEncQuality
++{
++ union
++ {
++ struct
++ {
++ /** Use raw frames for reference instead of reconstructed frames.
++ * it only impact motion estimation (ME) stage, and will not impact MC stage
++ * so the reconstruct picture will can match with decode side */
++ uint32_t useRawPicForRef : 1;
++ /** Disables skip check for ME stage, it will increase the bistream size
++ * but will improve the qulity */
++ uint32_t skipCheckDisable : 1;
++ /** Indicates app will override default driver FTQ settings using FTQEnable.
++ * FTQ is forward transform quantization */
++ uint32_t FTQOverride : 1;
++ /** Enables/disables FTQ. */
++ uint32_t FTQEnable : 1;
++ /** Indicates the app will provide the Skip Threshold LUT to use when FTQ is
++ * enabled (FTQSkipThresholdLUT), else default driver thresholds will be used. */
++ uint32_t FTQSkipThresholdLUTInput : 1;
++ /** Indicates the app will provide the Skip Threshold LUT to use when FTQ is
++ * disabled (NonFTQSkipThresholdLUT), else default driver thresholds will be used. */
++ uint32_t NonFTQSkipThresholdLUTInput : 1;
++ uint32_t ReservedBit : 1;
++ /** Control to enable the ME mode decision algorithm to bias to fewer B Direct/Skip types.
++ * Applies only to B frames, all other frames will ignore this setting. */
++ uint32_t directBiasAdjustmentEnable : 1;
++ /** Enables global motion bias. global motion also is called HME (Heirarchical Motion Estimation )
++ * HME is used to handle large motions and avoiding local minima in the video encoding process
++ * down scaled the input and reference picture, then do ME. the result will be a predictor to next level HME or ME
++ * current interface divide the HME to 3 level. UltraHME , SuperHME, and HME, result of UltraHME will be input of SurperHME,
++ * result of superHME will be a input for HME. HME result will be input of ME. it is a switch for HMEMVCostScalingFactor
++ * can change the HME bias inside RDO stage*/
++ uint32_t globalMotionBiasAdjustmentEnable : 1;
++ /** MV cost scaling ratio for HME ( predictors. It is used when
++ * globalMotionBiasAdjustmentEnable == 1, else it is ignored. Values are:
++ * 0: set MV cost to be 0 for HME predictor.
++ * 1: scale MV cost to be 1/2 of the default value for HME predictor.
++ * 2: scale MV cost to be 1/4 of the default value for HME predictor.
++ * 3: scale MV cost to be 1/8 of the default value for HME predictor. */
++ uint32_t HMEMVCostScalingFactor : 2;
++ /**disable HME, if it is disabled. Super*ultraHME should also be disabled */
++ uint32_t HMEDisable : 1;
++ /**disable Super HME, if it is disabled, ultraHME should be disabled */
++ uint32_t SuperHMEDisable : 1;
++ /** disable Ultra HME */
++ uint32_t UltraHMEDisable : 1;
++ /** disable panic mode. Panic mode happened when there are extreme BRC (bit rate control) requirement
++ * frame size cant achieve the target of BRC. when Panic mode is triggered, Coefficients will
++ * be set to zero. disable panic mode will improve quality but will impact BRC */
++ uint32_t PanicModeDisable : 1;
++ /** Force RepartitionCheck
++ * 0: DEFAULT - follow driver default settings.
++ * 1: FORCE_ENABLE - enable this feature totally for all cases.
++ * 2: FORCE_DISABLE - disable this feature totally for all cases. */
++ uint32_t ForceRepartitionCheck : 2;
++
++ };
++ uint32_t encControls;
++ };
++
++ /** Maps QP to skip thresholds when FTQ is enabled. Valid range is 0-255. */
++ uint8_t FTQSkipThresholdLUT[52];
++ /** Maps QP to skip thresholds when FTQ is disabled. Valid range is 0-65535. */
++ uint16_t NonFTQSkipThresholdLUT[52];
++
++ uint32_t reserved[VA_PADDING_HIGH]; // Reserved for future use.
++
++} VAEncMiscParameterEncQuality;
++
++/**
++ * \brief Custom Encoder Rounding Offset Control.
++ * Application may use this structure to set customized rounding
++ * offset parameters for quantization.
++ * Valid when \c VAConfigAttribCustomRoundingControl equals 1.
++ */
++typedef struct _VAEncMiscParameterCustomRoundingControl
++{
++ union {
++ struct {
++ /** \brief Enable customized rounding offset for intra blocks.
++ * If 0, default value would be taken by driver for intra
++ * rounding offset.
++ */
++ uint32_t enable_custom_rouding_intra : 1 ;
++
++ /** \brief Intra rounding offset
++ * Ignored if \c enable_custom_rouding_intra equals 0.
++ */
++ uint32_t rounding_offset_intra : 7;
++
++ /** \brief Enable customized rounding offset for inter blocks.
++ * If 0, default value would be taken by driver for inter
++ * rounding offset.
++ */
++ uint32_t enable_custom_rounding_inter : 1 ;
++
++ /** \brief Inter rounding offset
++ * Ignored if \c enable_custom_rouding_inter equals 0.
++ */
++ uint32_t rounding_offset_inter : 7;
++
++ /* Reserved */
++ uint32_t reserved :16;
++ } bits;
++ uint32_t value;
++ } rounding_offset_setting;
++} VAEncMiscParameterCustomRoundingControl;
++/**
++ * There will be cases where the bitstream buffer will not have enough room to hold
++ * the data for the entire slice, and the following flags will be used in the slice
++ * parameter to signal to the server for the possible cases.
++ * If a slice parameter buffer and slice data buffer pair is sent to the server with
++ * the slice data partially in the slice data buffer (BEGIN and MIDDLE cases below),
++ * then a slice parameter and data buffer needs to be sent again to complete this slice.
++ */
++#define VA_SLICE_DATA_FLAG_ALL 0x00 /* whole slice is in the buffer */
++#define VA_SLICE_DATA_FLAG_BEGIN 0x01 /* The beginning of the slice is in the buffer but the end if not */
++#define VA_SLICE_DATA_FLAG_MIDDLE 0x02 /* Neither beginning nor end of the slice is in the buffer */
++#define VA_SLICE_DATA_FLAG_END 0x04 /* end of the slice is in the buffer */
++
++/* Codec-independent Slice Parameter Buffer base */
++typedef struct _VASliceParameterBufferBase
++{
++ uint32_t slice_data_size; /* number of bytes in the slice data buffer for this slice */
++ uint32_t slice_data_offset; /* the offset to the first byte of slice data */
++ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX definitions */
++} VASliceParameterBufferBase;
++
++/**********************************
++ * JPEG common data structures
++ **********************************/
++/**
++ * \brief Huffman table for JPEG decoding.
++ *
++ * This structure holds the complete Huffman tables. This is an
++ * aggregation of all Huffman table (DHT) segments maintained by the
++ * application. i.e. up to 2 Huffman tables are stored in there for
++ * baseline profile.
++ *
++ * The #load_huffman_table array can be used as a hint to notify the
++ * VA driver implementation about which table(s) actually changed
++ * since the last submission of this buffer.
++ */
++typedef struct _VAHuffmanTableBufferJPEGBaseline {
++ /** \brief Specifies which #huffman_table is valid. */
++ uint8_t load_huffman_table[2];
++ /** \brief Huffman tables indexed by table identifier (Th). */
++ struct {
++ /** @name DC table (up to 12 categories) */
++ /**@{*/
++ /** \brief Number of Huffman codes of length i + 1 (Li). */
++ uint8_t num_dc_codes[16];
++ /** \brief Value associated with each Huffman code (Vij). */
++ uint8_t dc_values[12];
++ /**@}*/
++ /** @name AC table (2 special codes + up to 16 * 10 codes) */
++ /**@{*/
++ /** \brief Number of Huffman codes of length i + 1 (Li). */
++ uint8_t num_ac_codes[16];
++ /** \brief Value associated with each Huffman code (Vij). */
++ uint8_t ac_values[162];
++ /** \brief Padding to 4-byte boundaries. Must be set to zero. */
++ uint8_t pad[2];
++ /**@}*/
++ } huffman_table[2];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAHuffmanTableBufferJPEGBaseline;
++
++/****************************
++ * MPEG-2 data structures
++ ****************************/
++
++/* MPEG-2 Picture Parameter Buffer */
++/*
++ * For each frame or field, and before any slice data, a single
++ * picture parameter buffer must be send.
++ */
++typedef struct _VAPictureParameterBufferMPEG2
++{
++ uint16_t horizontal_size;
++ uint16_t vertical_size;
++ VASurfaceID forward_reference_picture;
++ VASurfaceID backward_reference_picture;
++ /* meanings of the following fields are the same as in the standard */
++ int32_t picture_coding_type;
++ int32_t f_code; /* pack all four fcode into this */
++ union {
++ struct {
++ uint32_t intra_dc_precision : 2;
++ uint32_t picture_structure : 2;
++ uint32_t top_field_first : 1;
++ uint32_t frame_pred_frame_dct : 1;
++ uint32_t concealment_motion_vectors : 1;
++ uint32_t q_scale_type : 1;
++ uint32_t intra_vlc_format : 1;
++ uint32_t alternate_scan : 1;
++ uint32_t repeat_first_field : 1;
++ uint32_t progressive_frame : 1;
++ uint32_t is_first_field : 1; /* indicate whether the current field
++ * is the first field for field picture
++ */
++ } bits;
++ uint32_t value;
++ } picture_coding_extension;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAPictureParameterBufferMPEG2;
++
++/** MPEG-2 Inverse Quantization Matrix Buffer */
++typedef struct _VAIQMatrixBufferMPEG2
++{
++ /** \brief Same as the MPEG-2 bitstream syntax element. */
++ int32_t load_intra_quantiser_matrix;
++ /** \brief Same as the MPEG-2 bitstream syntax element. */
++ int32_t load_non_intra_quantiser_matrix;
++ /** \brief Same as the MPEG-2 bitstream syntax element. */
++ int32_t load_chroma_intra_quantiser_matrix;
++ /** \brief Same as the MPEG-2 bitstream syntax element. */
++ int32_t load_chroma_non_intra_quantiser_matrix;
++ /** \brief Luminance intra matrix, in zig-zag scan order. */
++ uint8_t intra_quantiser_matrix[64];
++ /** \brief Luminance non-intra matrix, in zig-zag scan order. */
++ uint8_t non_intra_quantiser_matrix[64];
++ /** \brief Chroma intra matrix, in zig-zag scan order. */
++ uint8_t chroma_intra_quantiser_matrix[64];
++ /** \brief Chroma non-intra matrix, in zig-zag scan order. */
++ uint8_t chroma_non_intra_quantiser_matrix[64];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAIQMatrixBufferMPEG2;
++
++/** MPEG-2 Slice Parameter Buffer */
++typedef struct _VASliceParameterBufferMPEG2
++{
++ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
++ uint32_t slice_data_offset;/* the offset to the first byte of slice data */
++ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
++ uint32_t macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
++ uint32_t slice_horizontal_position;
++ uint32_t slice_vertical_position;
++ int32_t quantiser_scale_code;
++ int32_t intra_slice_flag;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VASliceParameterBufferMPEG2;
++
++/** MPEG-2 Macroblock Parameter Buffer */
++typedef struct _VAMacroblockParameterBufferMPEG2
++{
++ uint16_t macroblock_address;
++ /*
++ * macroblock_address (in raster scan order)
++ * top-left: 0
++ * bottom-right: picture-height-in-mb*picture-width-in-mb - 1
++ */
++ uint8_t macroblock_type; /* see definition below */
++ union {
++ struct {
++ uint32_t frame_motion_type : 2;
++ uint32_t field_motion_type : 2;
++ uint32_t dct_type : 1;
++ } bits;
++ uint32_t value;
++ } macroblock_modes;
++ uint8_t motion_vertical_field_select;
++ /*
++ * motion_vertical_field_select:
++ * see section 6.3.17.2 in the spec
++ * only the lower 4 bits are used
++ * bit 0: first vector forward
++ * bit 1: first vector backward
++ * bit 2: second vector forward
++ * bit 3: second vector backward
++ */
++ int16_t PMV[2][2][2]; /* see Table 7-7 in the spec */
++ uint16_t coded_block_pattern;
++ /*
++ * The bitplanes for coded_block_pattern are described
++ * in Figure 6.10-12 in the spec
++ */
++
++ /* Number of skipped macroblocks after this macroblock */
++ uint16_t num_skipped_macroblocks;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAMacroblockParameterBufferMPEG2;
++
++/*
++ * OR'd flags for macroblock_type (section 6.3.17.1 in the spec)
++ */
++#define VA_MB_TYPE_MOTION_FORWARD 0x02
++#define VA_MB_TYPE_MOTION_BACKWARD 0x04
++#define VA_MB_TYPE_MOTION_PATTERN 0x08
++#define VA_MB_TYPE_MOTION_INTRA 0x10
++
++/**
++ * MPEG-2 Residual Data Buffer
++ * For each macroblock, there wil be 64 shorts (16-bit) in the
++ * residual data buffer
++ */
++
++/****************************
++ * MPEG-4 Part 2 data structures
++ ****************************/
++
++/* MPEG-4 Picture Parameter Buffer */
++/*
++ * For each frame or field, and before any slice data, a single
++ * picture parameter buffer must be send.
++ */
++typedef struct _VAPictureParameterBufferMPEG4
++{
++ uint16_t vop_width;
++ uint16_t vop_height;
++ VASurfaceID forward_reference_picture;
++ VASurfaceID backward_reference_picture;
++ union {
++ struct {
++ uint32_t short_video_header : 1;
++ uint32_t chroma_format : 2;
++ uint32_t interlaced : 1;
++ uint32_t obmc_disable : 1;
++ uint32_t sprite_enable : 2;
++ uint32_t sprite_warping_accuracy : 2;
++ uint32_t quant_type : 1;
++ uint32_t quarter_sample : 1;
++ uint32_t data_partitioned : 1;
++ uint32_t reversible_vlc : 1;
++ uint32_t resync_marker_disable : 1;
++ } bits;
++ uint32_t value;
++ } vol_fields;
++ uint8_t no_of_sprite_warping_points;
++ int16_t sprite_trajectory_du[3];
++ int16_t sprite_trajectory_dv[3];
++ uint8_t quant_precision;
++ union {
++ struct {
++ uint32_t vop_coding_type : 2;
++ uint32_t backward_reference_vop_coding_type : 2;
++ uint32_t vop_rounding_type : 1;
++ uint32_t intra_dc_vlc_thr : 3;
++ uint32_t top_field_first : 1;
++ uint32_t alternate_vertical_scan_flag : 1;
++ } bits;
++ uint32_t value;
++ } vop_fields;
++ uint8_t vop_fcode_forward;
++ uint8_t vop_fcode_backward;
++ uint16_t vop_time_increment_resolution;
++ /* short header related */
++ uint8_t num_gobs_in_vop;
++ uint8_t num_macroblocks_in_gob;
++ /* for direct mode prediction */
++ int16_t TRB;
++ int16_t TRD;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAPictureParameterBufferMPEG4;
++
++/** MPEG-4 Inverse Quantization Matrix Buffer */
++typedef struct _VAIQMatrixBufferMPEG4
++{
++ /** Same as the MPEG-4:2 bitstream syntax element. */
++ int32_t load_intra_quant_mat;
++ /** Same as the MPEG-4:2 bitstream syntax element. */
++ int32_t load_non_intra_quant_mat;
++ /** The matrix for intra blocks, in zig-zag scan order. */
++ uint8_t intra_quant_mat[64];
++ /** The matrix for non-intra blocks, in zig-zag scan order. */
++ uint8_t non_intra_quant_mat[64];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAIQMatrixBufferMPEG4;
++
++/** MPEG-4 Slice Parameter Buffer */
++typedef struct _VASliceParameterBufferMPEG4
++{
++ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
++ uint32_t slice_data_offset;/* the offset to the first byte of slice data */
++ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
++ uint32_t macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
++ uint32_t macroblock_number;
++ int32_t quant_scale;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VASliceParameterBufferMPEG4;
++
++/**
++ VC-1 data structures
++*/
++
++typedef enum /* see 7.1.1.32 */
++{
++ VAMvMode1Mv = 0,
++ VAMvMode1MvHalfPel = 1,
++ VAMvMode1MvHalfPelBilinear = 2,
++ VAMvModeMixedMv = 3,
++ VAMvModeIntensityCompensation = 4
++} VAMvModeVC1;
++
++/** VC-1 Picture Parameter Buffer */
++/*
++ * For each picture, and before any slice data, a picture parameter
++ * buffer must be send. Multiple picture parameter buffers may be
++ * sent for a single picture. In that case picture parameters will
++ * apply to all slice data that follow it until a new picture
++ * parameter buffer is sent.
++ *
++ * Notes:
++ * pic_quantizer_type should be set to the applicable quantizer
++ * type as defined by QUANTIZER (J.1.19) and either
++ * PQUANTIZER (7.1.1.8) or PQINDEX (7.1.1.6)
++ */
++typedef struct _VAPictureParameterBufferVC1
++{
++ VASurfaceID forward_reference_picture;
++ VASurfaceID backward_reference_picture;
++ /* if out-of-loop post-processing is done on the render
++ target, then we need to keep the in-loop decoded
++ picture as a reference picture */
++ VASurfaceID inloop_decoded_picture;
++
++ /* sequence layer for AP or meta data for SP and MP */
++ union {
++ struct {
++ uint32_t pulldown : 1; /* SEQUENCE_LAYER::PULLDOWN */
++ uint32_t interlace : 1; /* SEQUENCE_LAYER::INTERLACE */
++ uint32_t tfcntrflag : 1; /* SEQUENCE_LAYER::TFCNTRFLAG */
++ uint32_t finterpflag : 1; /* SEQUENCE_LAYER::FINTERPFLAG */
++ uint32_t psf : 1; /* SEQUENCE_LAYER::PSF */
++ uint32_t multires : 1; /* METADATA::MULTIRES */
++ uint32_t overlap : 1; /* METADATA::OVERLAP */
++ uint32_t syncmarker : 1; /* METADATA::SYNCMARKER */
++ uint32_t rangered : 1; /* METADATA::RANGERED */
++ uint32_t max_b_frames : 3; /* METADATA::MAXBFRAMES */
++ uint32_t profile : 2; /* SEQUENCE_LAYER::PROFILE or The MSB of METADATA::PROFILE */
++ } bits;
++ uint32_t value;
++ } sequence_fields;
++
++ uint16_t coded_width; /* ENTRY_POINT_LAYER::CODED_WIDTH */
++ uint16_t coded_height; /* ENTRY_POINT_LAYER::CODED_HEIGHT */
++ union {
++ struct {
++ uint32_t broken_link : 1; /* ENTRY_POINT_LAYER::BROKEN_LINK */
++ uint32_t closed_entry : 1; /* ENTRY_POINT_LAYER::CLOSED_ENTRY */
++ uint32_t panscan_flag : 1; /* ENTRY_POINT_LAYER::PANSCAN_FLAG */
++ uint32_t loopfilter : 1; /* ENTRY_POINT_LAYER::LOOPFILTER */
++ } bits;
++ uint32_t value;
++ } entrypoint_fields;
++ uint8_t conditional_overlap_flag; /* ENTRY_POINT_LAYER::CONDOVER */
++ uint8_t fast_uvmc_flag; /* ENTRY_POINT_LAYER::FASTUVMC */
++ union {
++ struct {
++ uint32_t luma_flag : 1; /* ENTRY_POINT_LAYER::RANGE_MAPY_FLAG */
++ uint32_t luma : 3; /* ENTRY_POINT_LAYER::RANGE_MAPY */
++ uint32_t chroma_flag : 1; /* ENTRY_POINT_LAYER::RANGE_MAPUV_FLAG */
++ uint32_t chroma : 3; /* ENTRY_POINT_LAYER::RANGE_MAPUV */
++ } bits;
++ uint32_t value;
++ } range_mapping_fields;
++
++ uint8_t b_picture_fraction; /* Index for PICTURE_LAYER::BFRACTION value in Table 40 (7.1.1.14) */
++ uint8_t cbp_table; /* PICTURE_LAYER::CBPTAB/ICBPTAB */
++ uint8_t mb_mode_table; /* PICTURE_LAYER::MBMODETAB */
++ uint8_t range_reduction_frame;/* PICTURE_LAYER::RANGEREDFRM */
++ uint8_t rounding_control; /* PICTURE_LAYER::RNDCTRL */
++ uint8_t post_processing; /* PICTURE_LAYER::POSTPROC */
++ uint8_t picture_resolution_index; /* PICTURE_LAYER::RESPIC */
++ uint8_t luma_scale; /* PICTURE_LAYER::LUMSCALE */
++ uint8_t luma_shift; /* PICTURE_LAYER::LUMSHIFT */
++
++ union {
++ struct {
++ uint32_t picture_type : 3; /* PICTURE_LAYER::PTYPE */
++ uint32_t frame_coding_mode : 3; /* PICTURE_LAYER::FCM */
++ uint32_t top_field_first : 1; /* PICTURE_LAYER::TFF */
++ uint32_t is_first_field : 1; /* set to 1 if it is the first field */
++ uint32_t intensity_compensation : 1; /* PICTURE_LAYER::INTCOMP */
++ } bits;
++ uint32_t value;
++ } picture_fields;
++ union {
++ struct {
++ uint32_t mv_type_mb : 1; /* PICTURE::MVTYPEMB */
++ uint32_t direct_mb : 1; /* PICTURE::DIRECTMB */
++ uint32_t skip_mb : 1; /* PICTURE::SKIPMB */
++ uint32_t field_tx : 1; /* PICTURE::FIELDTX */
++ uint32_t forward_mb : 1; /* PICTURE::FORWARDMB */
++ uint32_t ac_pred : 1; /* PICTURE::ACPRED */
++ uint32_t overflags : 1; /* PICTURE::OVERFLAGS */
++ } flags;
++ uint32_t value;
++ } raw_coding;
++ union {
++ struct {
++ uint32_t bp_mv_type_mb : 1; /* PICTURE::MVTYPEMB */
++ uint32_t bp_direct_mb : 1; /* PICTURE::DIRECTMB */
++ uint32_t bp_skip_mb : 1; /* PICTURE::SKIPMB */
++ uint32_t bp_field_tx : 1; /* PICTURE::FIELDTX */
++ uint32_t bp_forward_mb : 1; /* PICTURE::FORWARDMB */
++ uint32_t bp_ac_pred : 1; /* PICTURE::ACPRED */
++ uint32_t bp_overflags : 1; /* PICTURE::OVERFLAGS */
++ } flags;
++ uint32_t value;
++ } bitplane_present; /* signal what bitplane is being passed via the bitplane buffer */
++ union {
++ struct {
++ uint32_t reference_distance_flag : 1;/* PICTURE_LAYER::REFDIST_FLAG */
++ uint32_t reference_distance : 5;/* PICTURE_LAYER::REFDIST */
++ uint32_t num_reference_pictures: 1;/* PICTURE_LAYER::NUMREF */
++ uint32_t reference_field_pic_indicator : 1;/* PICTURE_LAYER::REFFIELD */
++ } bits;
++ uint32_t value;
++ } reference_fields;
++ union {
++ struct {
++ uint32_t mv_mode : 3; /* PICTURE_LAYER::MVMODE */
++ uint32_t mv_mode2 : 3; /* PICTURE_LAYER::MVMODE2 */
++ uint32_t mv_table : 3; /* PICTURE_LAYER::MVTAB/IMVTAB */
++ uint32_t two_mv_block_pattern_table: 2; /* PICTURE_LAYER::2MVBPTAB */
++ uint32_t four_mv_switch : 1; /* PICTURE_LAYER::4MVSWITCH */
++ uint32_t four_mv_block_pattern_table : 2; /* PICTURE_LAYER::4MVBPTAB */
++ uint32_t extended_mv_flag : 1; /* ENTRY_POINT_LAYER::EXTENDED_MV */
++ uint32_t extended_mv_range : 2; /* PICTURE_LAYER::MVRANGE */
++ uint32_t extended_dmv_flag : 1; /* ENTRY_POINT_LAYER::EXTENDED_DMV */
++ uint32_t extended_dmv_range : 2; /* PICTURE_LAYER::DMVRANGE */
++ } bits;
++ uint32_t value;
++ } mv_fields;
++ union {
++ struct {
++ uint32_t dquant : 2; /* ENTRY_POINT_LAYER::DQUANT */
++ uint32_t quantizer : 2; /* ENTRY_POINT_LAYER::QUANTIZER */
++ uint32_t half_qp : 1; /* PICTURE_LAYER::HALFQP */
++ uint32_t pic_quantizer_scale : 5;/* PICTURE_LAYER::PQUANT */
++ uint32_t pic_quantizer_type : 1;/* PICTURE_LAYER::PQUANTIZER */
++ uint32_t dq_frame : 1; /* VOPDQUANT::DQUANTFRM */
++ uint32_t dq_profile : 2; /* VOPDQUANT::DQPROFILE */
++ uint32_t dq_sb_edge : 2; /* VOPDQUANT::DQSBEDGE */
++ uint32_t dq_db_edge : 2; /* VOPDQUANT::DQDBEDGE */
++ uint32_t dq_binary_level : 1; /* VOPDQUANT::DQBILEVEL */
++ uint32_t alt_pic_quantizer : 5;/* VOPDQUANT::ALTPQUANT */
++ } bits;
++ uint32_t value;
++ } pic_quantizer_fields;
++ union {
++ struct {
++ uint32_t variable_sized_transform_flag : 1;/* ENTRY_POINT_LAYER::VSTRANSFORM */
++ uint32_t mb_level_transform_type_flag : 1;/* PICTURE_LAYER::TTMBF */
++ uint32_t frame_level_transform_type : 2;/* PICTURE_LAYER::TTFRM */
++ uint32_t transform_ac_codingset_idx1 : 2;/* PICTURE_LAYER::TRANSACFRM */
++ uint32_t transform_ac_codingset_idx2 : 2;/* PICTURE_LAYER::TRANSACFRM2 */
++ uint32_t intra_transform_dc_table : 1;/* PICTURE_LAYER::TRANSDCTAB */
++ } bits;
++ uint32_t value;
++ } transform_fields;
++
++ uint8_t luma_scale2; /* PICTURE_LAYER::LUMSCALE2 */
++ uint8_t luma_shift2; /* PICTURE_LAYER::LUMSHIFT2 */
++ uint8_t intensity_compensation_field; /* Index for PICTURE_LAYER::INTCOMPFIELD value in Table 109 (9.1.1.48) */
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_MEDIUM - 1];
++} VAPictureParameterBufferVC1;
++
++/** VC-1 Bitplane Buffer
++There will be at most three bitplanes coded in any picture header. To send
++the bitplane data more efficiently, each byte is divided in two nibbles, with
++each nibble carrying three bitplanes for one macroblock. The following table
++shows the bitplane data arrangement within each nibble based on the picture
++type.
++
++Picture Type Bit3 Bit2 Bit1 Bit0
++I or BI OVERFLAGS ACPRED FIELDTX
++P MYTYPEMB SKIPMB DIRECTMB
++B FORWARDMB SKIPMB DIRECTMB
++
++Within each byte, the lower nibble is for the first MB and the upper nibble is
++for the second MB. E.g. the lower nibble of the first byte in the bitplane
++buffer is for Macroblock #1 and the upper nibble of the first byte is for
++Macroblock #2 in the first row.
++*/
++
++/* VC-1 Slice Parameter Buffer */
++typedef struct _VASliceParameterBufferVC1
++{
++ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
++ uint32_t slice_data_offset;/* the offset to the first byte of slice data */
++ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
++ uint32_t macroblock_offset;/* the offset to the first bit of MB from the first byte of slice data */
++ uint32_t slice_vertical_position;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VASliceParameterBufferVC1;
++
++/* VC-1 Slice Data Buffer */
++/*
++This is simplely a buffer containing raw bit-stream bytes
++*/
++
++/****************************
++ * H.264/AVC data structures
++ ****************************/
++
++typedef struct _VAPictureH264
++{
++ VASurfaceID picture_id;
++ uint32_t frame_idx;
++ uint32_t flags;
++ int32_t TopFieldOrderCnt;
++ int32_t BottomFieldOrderCnt;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAPictureH264;
++/* flags in VAPictureH264 could be OR of the following */
++#define VA_PICTURE_H264_INVALID 0x00000001
++#define VA_PICTURE_H264_TOP_FIELD 0x00000002
++#define VA_PICTURE_H264_BOTTOM_FIELD 0x00000004
++#define VA_PICTURE_H264_SHORT_TERM_REFERENCE 0x00000008
++#define VA_PICTURE_H264_LONG_TERM_REFERENCE 0x00000010
++
++/** H.264 Picture Parameter Buffer */
++/*
++ * For each picture, and before any slice data, a single
++ * picture parameter buffer must be send.
++ */
++typedef struct _VAPictureParameterBufferH264
++{
++ VAPictureH264 CurrPic;
++ VAPictureH264 ReferenceFrames[16]; /* in DPB */
++ uint16_t picture_width_in_mbs_minus1;
++ uint16_t picture_height_in_mbs_minus1;
++ uint8_t bit_depth_luma_minus8;
++ uint8_t bit_depth_chroma_minus8;
++ uint8_t num_ref_frames;
++ union {
++ struct {
++ uint32_t chroma_format_idc : 2;
++ uint32_t residual_colour_transform_flag : 1; /* Renamed to separate_colour_plane_flag in newer standard versions. */
++ uint32_t gaps_in_frame_num_value_allowed_flag : 1;
++ uint32_t frame_mbs_only_flag : 1;
++ uint32_t mb_adaptive_frame_field_flag : 1;
++ uint32_t direct_8x8_inference_flag : 1;
++ uint32_t MinLumaBiPredSize8x8 : 1; /* see A.3.3.2 */
++ uint32_t log2_max_frame_num_minus4 : 4;
++ uint32_t pic_order_cnt_type : 2;
++ uint32_t log2_max_pic_order_cnt_lsb_minus4 : 4;
++ uint32_t delta_pic_order_always_zero_flag : 1;
++ } bits;
++ uint32_t value;
++ } seq_fields;
++ // FMO is not supported.
++ va_deprecated uint8_t num_slice_groups_minus1;
++ va_deprecated uint8_t slice_group_map_type;
++ va_deprecated uint16_t slice_group_change_rate_minus1;
++ int8_t pic_init_qp_minus26;
++ int8_t pic_init_qs_minus26;
++ int8_t chroma_qp_index_offset;
++ int8_t second_chroma_qp_index_offset;
++ union {
++ struct {
++ uint32_t entropy_coding_mode_flag : 1;
++ uint32_t weighted_pred_flag : 1;
++ uint32_t weighted_bipred_idc : 2;
++ uint32_t transform_8x8_mode_flag : 1;
++ uint32_t field_pic_flag : 1;
++ uint32_t constrained_intra_pred_flag : 1;
++ uint32_t pic_order_present_flag : 1; /* Renamed to bottom_field_pic_order_in_frame_present_flag in newer standard versions. */
++ uint32_t deblocking_filter_control_present_flag : 1;
++ uint32_t redundant_pic_cnt_present_flag : 1;
++ uint32_t reference_pic_flag : 1; /* nal_ref_idc != 0 */
++ } bits;
++ uint32_t value;
++ } pic_fields;
++ uint16_t frame_num;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_MEDIUM];
++} VAPictureParameterBufferH264;
++
++/** H.264 Inverse Quantization Matrix Buffer */
++typedef struct _VAIQMatrixBufferH264
++{
++ /** \brief 4x4 scaling list, in raster scan order. */
++ uint8_t ScalingList4x4[6][16];
++ /** \brief 8x8 scaling list, in raster scan order. */
++ uint8_t ScalingList8x8[2][64];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAIQMatrixBufferH264;
++
++/** H.264 Slice Parameter Buffer */
++typedef struct _VASliceParameterBufferH264
++{
++ uint32_t slice_data_size;/* number of bytes in the slice data buffer for this slice */
++ /** \brief Byte offset to the NAL Header Unit for this slice. */
++ uint32_t slice_data_offset;
++ uint32_t slice_data_flag; /* see VA_SLICE_DATA_FLAG_XXX defintions */
++ /**
++ * \brief Bit offset from NAL Header Unit to the begining of slice_data().
++ *
++ * This bit offset is relative to and includes the NAL unit byte
++ * and represents the number of bits parsed in the slice_header()
++ * after the removal of any emulation prevention bytes in
++ * there. However, the slice data buffer passed to the hardware is
++ * the original bitstream, thus including any emulation prevention
++ * bytes.
++ */
++ uint16_t slice_data_bit_offset;
++ uint16_t first_mb_in_slice;
++ uint8_t slice_type;
++ uint8_t direct_spatial_mv_pred_flag;
++ /**
++ * H264/AVC syntax element
++ *
++ * if num_ref_idx_active_override_flag equals 0, host decoder should
++ * set its value to num_ref_idx_l0_default_active_minus1.
++ */
++ uint8_t num_ref_idx_l0_active_minus1;
++ /**
++ * H264/AVC syntax element
++ *
++ * if num_ref_idx_active_override_flag equals 0, host decoder should
++ * set its value to num_ref_idx_l1_default_active_minus1.
++ */
++ uint8_t num_ref_idx_l1_active_minus1;
++ uint8_t cabac_init_idc;
++ int8_t slice_qp_delta;
++ uint8_t disable_deblocking_filter_idc;
++ int8_t slice_alpha_c0_offset_div2;
++ int8_t slice_beta_offset_div2;
++ VAPictureH264 RefPicList0[32]; /* See 8.2.4.2 */
++ VAPictureH264 RefPicList1[32]; /* See 8.2.4.2 */
++ uint8_t luma_log2_weight_denom;
++ uint8_t chroma_log2_weight_denom;
++ uint8_t luma_weight_l0_flag;
++ int16_t luma_weight_l0[32];
++ int16_t luma_offset_l0[32];
++ uint8_t chroma_weight_l0_flag;
++ int16_t chroma_weight_l0[32][2];
++ int16_t chroma_offset_l0[32][2];
++ uint8_t luma_weight_l1_flag;
++ int16_t luma_weight_l1[32];
++ int16_t luma_offset_l1[32];
++ uint8_t chroma_weight_l1_flag;
++ int16_t chroma_weight_l1[32][2];
++ int16_t chroma_offset_l1[32][2];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VASliceParameterBufferH264;
++
++/****************************
++ * Common encode data structures
++ ****************************/
++typedef enum
++{
++ VAEncPictureTypeIntra = 0,
++ VAEncPictureTypePredictive = 1,
++ VAEncPictureTypeBidirectional = 2,
++} VAEncPictureType;
++
++/**
++ * \brief Encode Slice Parameter Buffer.
++ *
++ * @deprecated
++ * This is a deprecated encode slice parameter buffer, All applications
++ * \c can use VAEncSliceParameterBufferXXX (XXX = MPEG2, HEVC, H264, JPEG)
++ */
++typedef struct _VAEncSliceParameterBuffer
++{
++ uint32_t start_row_number; /* starting MB row number for this slice */
++ uint32_t slice_height; /* slice height measured in MB */
++ union {
++ struct {
++ uint32_t is_intra : 1;
++ uint32_t disable_deblocking_filter_idc : 2;
++ uint32_t uses_long_term_ref :1;
++ uint32_t is_long_term_ref :1;
++ } bits;
++ uint32_t value;
++ } slice_flags;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncSliceParameterBuffer;
++
++
++/****************************
++ * H.263 specific encode data structures
++ ****************************/
++
++typedef struct _VAEncSequenceParameterBufferH263
++{
++ uint32_t intra_period;
++ uint32_t bits_per_second;
++ uint32_t frame_rate;
++ uint32_t initial_qp;
++ uint32_t min_qp;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncSequenceParameterBufferH263;
++
++typedef struct _VAEncPictureParameterBufferH263
++{
++ VASurfaceID reference_picture;
++ VASurfaceID reconstructed_picture;
++ VABufferID coded_buf;
++ uint16_t picture_width;
++ uint16_t picture_height;
++ VAEncPictureType picture_type;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncPictureParameterBufferH263;
++
++/****************************
++ * MPEG-4 specific encode data structures
++ ****************************/
++
++typedef struct _VAEncSequenceParameterBufferMPEG4
++{
++ uint8_t profile_and_level_indication;
++ uint32_t intra_period;
++ uint32_t video_object_layer_width;
++ uint32_t video_object_layer_height;
++ uint32_t vop_time_increment_resolution;
++ uint32_t fixed_vop_rate;
++ uint32_t fixed_vop_time_increment;
++ uint32_t bits_per_second;
++ uint32_t frame_rate;
++ uint32_t initial_qp;
++ uint32_t min_qp;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncSequenceParameterBufferMPEG4;
++
++typedef struct _VAEncPictureParameterBufferMPEG4
++{
++ VASurfaceID reference_picture;
++ VASurfaceID reconstructed_picture;
++ VABufferID coded_buf;
++ uint16_t picture_width;
++ uint16_t picture_height;
++ uint32_t modulo_time_base; /* number of 1s */
++ uint32_t vop_time_increment;
++ VAEncPictureType picture_type;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAEncPictureParameterBufferMPEG4;
++
++
++
++/** Buffer functions */
++
++/**
++ * Creates a buffer for "num_elements" elements of "size" bytes and
++ * initalize with "data".
++ * if "data" is null, then the contents of the buffer data store
++ * are undefined.
++ * Basically there are two ways to get buffer data to the server side. One is
++ * to call vaCreateBuffer() with a non-null "data", which results the data being
++ * copied to the data store on the server side. A different method that
++ * eliminates this copy is to pass null as "data" when calling vaCreateBuffer(),
++ * and then use vaMapBuffer() to map the data store from the server side to the
++ * client address space for access.
++ * The user must call vaDestroyBuffer() to destroy a buffer.
++ * Note: image buffers are created by the library, not the client. Please see
++ * vaCreateImage on how image buffers are managed.
++ */
++VAStatus vaCreateBuffer (
++ VADisplay dpy,
++ VAContextID context,
++ VABufferType type, /* in */
++ unsigned int size, /* in */
++ unsigned int num_elements, /* in */
++ void *data, /* in */
++ VABufferID *buf_id /* out */
++);
++
++/**
++ * Create a buffer for given width & height get unit_size, pitch, buf_id for 2D buffer
++ * for permb qp buffer, it will return unit_size for one MB or LCU and the pitch for alignments
++ * can call vaMapBuffer with this Buffer ID to get virtual address.
++ * e.g. AVC 1080P encode, 1920x1088, the size in MB is 120x68,but inside driver,
++ * maybe it should align with 256, and one byte present one Qp.so, call the function.
++ * then get unit_size = 1, pitch = 256. call vaMapBuffer to get the virtual address (pBuf).
++ * then read write the memory like 2D. the size is 256x68, application can only use 120x68
++ * pBuf + 256 is the start of next line.
++ * different driver implementation maybe return different unit_size and pitch
++ */
++VAStatus vaCreateBuffer2(
++ VADisplay dpy,
++ VAContextID context,
++ VABufferType type,
++ unsigned int width,
++ unsigned int height,
++ unsigned int *unit_size,
++ unsigned int *pitch,
++ VABufferID *buf_id
++);
++
++/**
++ * Convey to the server how many valid elements are in the buffer.
++ * e.g. if multiple slice parameters are being held in a single buffer,
++ * this will communicate to the server the number of slice parameters
++ * that are valid in the buffer.
++ */
++VAStatus vaBufferSetNumElements (
++ VADisplay dpy,
++ VABufferID buf_id, /* in */
++ unsigned int num_elements /* in */
++);
++
++
++/**
++ * device independent data structure for codedbuffer
++ */
++
++/*
++ * FICTURE_AVE_QP(bit7-0): The average Qp value used during this frame
++ * LARGE_SLICE(bit8):At least one slice in the current frame was large
++ * enough for the encoder to attempt to limit its size.
++ * SLICE_OVERFLOW(bit9): At least one slice in the current frame has
++ * exceeded the maximum slice size specified.
++ * BITRATE_OVERFLOW(bit10): The peak bitrate was exceeded for this frame.
++ * BITRATE_HIGH(bit11): The frame size got within the safety margin of the maximum size (VCM only)
++ * AIR_MB_OVER_THRESHOLD: the number of MBs adapted to Intra MB
++ */
++#define VA_CODED_BUF_STATUS_PICTURE_AVE_QP_MASK 0xff
++#define VA_CODED_BUF_STATUS_LARGE_SLICE_MASK 0x100
++#define VA_CODED_BUF_STATUS_SLICE_OVERFLOW_MASK 0x200
++#define VA_CODED_BUF_STATUS_BITRATE_OVERFLOW 0x400
++#define VA_CODED_BUF_STATUS_BITRATE_HIGH 0x800
++/**
++ * \brief The frame has exceeded the maximum requested size.
++ *
++ * This flag indicates that the encoded frame size exceeds the value
++ * specified through a misc parameter buffer of type
++ * #VAEncMiscParameterTypeMaxFrameSize.
++ */
++#define VA_CODED_BUF_STATUS_FRAME_SIZE_OVERFLOW 0x1000
++/**
++ * \brief the bitstream is bad or corrupt.
++ */
++#define VA_CODED_BUF_STATUS_BAD_BITSTREAM 0x8000
++#define VA_CODED_BUF_STATUS_AIR_MB_OVER_THRESHOLD 0xff0000
++
++/**
++ * \brief The coded buffer segment status contains frame encoding passes number
++ *
++ * This is the mask to get the number of encoding passes from the coded
++ * buffer segment status.
++ * NUMBER_PASS(bit24~bit27): the number for encoding passes executed for the coded frame.
++ *
++ */
++#define VA_CODED_BUF_STATUS_NUMBER_PASSES_MASK 0xf000000
++
++/**
++ * \brief The coded buffer segment contains a single NAL unit.
++ *
++ * This flag indicates that the coded buffer segment contains a
++ * single NAL unit. This flag might be useful to the user for
++ * processing the coded buffer.
++ */
++#define VA_CODED_BUF_STATUS_SINGLE_NALU 0x10000000
++
++/**
++ * \brief Coded buffer segment.
++ *
++ * #VACodedBufferSegment is an element of a linked list describing
++ * some information on the coded buffer. The coded buffer segment
++ * could contain either a single NAL unit, or more than one NAL unit.
++ * It is recommended (but not required) to return a single NAL unit
++ * in a coded buffer segment, and the implementation should set the
++ * VA_CODED_BUF_STATUS_SINGLE_NALU status flag if that is the case.
++ */
++typedef struct _VACodedBufferSegment {
++ /**
++ * \brief Size of the data buffer in this segment (in bytes).
++ */
++ uint32_t size;
++ /** \brief Bit offset into the data buffer where the video data starts. */
++ uint32_t bit_offset;
++ /** \brief Status set by the driver. See \c VA_CODED_BUF_STATUS_*. */
++ uint32_t status;
++ /** \brief Reserved for future use. */
++ uint32_t reserved;
++ /** \brief Pointer to the start of the data buffer. */
++ void *buf;
++ /**
++ * \brief Pointer to the next #VACodedBufferSegment element,
++ * or \c NULL if there is none.
++ */
++ void *next;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VACodedBufferSegment;
++
++/**
++ * Map data store of the buffer into the client's address space
++ * vaCreateBuffer() needs to be called with "data" set to NULL before
++ * calling vaMapBuffer()
++ *
++ * if buffer type is VAEncCodedBufferType, pbuf points to link-list of
++ * VACodedBufferSegment, and the list is terminated if "next" is NULL
++ */
++VAStatus vaMapBuffer (
++ VADisplay dpy,
++ VABufferID buf_id, /* in */
++ void **pbuf /* out */
++);
++
++/**
++ * After client making changes to a mapped data store, it needs to
++ * "Unmap" it to let the server know that the data is ready to be
++ * consumed by the server
++ */
++VAStatus vaUnmapBuffer (
++ VADisplay dpy,
++ VABufferID buf_id /* in */
++);
++
++/**
++ * After this call, the buffer is deleted and this buffer_id is no longer valid
++ *
++ * A buffer can be re-used and sent to the server by another Begin/Render/End
++ * sequence if vaDestroyBuffer() is not called with this buffer.
++ *
++ * Note re-using a shared buffer (e.g. a slice data buffer) between the host and the
++ * hardware accelerator can result in performance dropping.
++ */
++VAStatus vaDestroyBuffer (
++ VADisplay dpy,
++ VABufferID buffer_id
++);
++
++/** \brief VA buffer information */
++typedef struct {
++ /** \brief Buffer handle */
++ uintptr_t handle;
++ /** \brief Buffer type (See \ref VABufferType). */
++ uint32_t type;
++ /**
++ * \brief Buffer memory type (See \ref VASurfaceAttribMemoryType).
++ *
++ * On input to vaAcquireBufferHandle(), this field can serve as a hint
++ * to specify the set of memory types the caller is interested in.
++ * On successful return from vaAcquireBufferHandle(), the field is
++ * updated with the best matching memory type.
++ */
++ uint32_t mem_type;
++ /** \brief Size of the underlying buffer. */
++ size_t mem_size;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VABufferInfo;
++
++/**
++ * \brief Acquires buffer handle for external API usage
++ *
++ * Locks the VA buffer object \ref buf_id for external API usage like
++ * EGL or OpenCL (OCL). This function is a synchronization point. This
++ * means that any pending operation is guaranteed to be completed
++ * prior to returning from the function.
++ *
++ * If the referenced VA buffer object is the backing store of a VA
++ * surface, then this function acts as if vaSyncSurface() on the
++ * parent surface was called first.
++ *
++ * The \ref VABufferInfo argument shall be zero'ed on input. On
++ * successful output, the data structure is filled in with all the
++ * necessary buffer level implementation details like handle, type,
++ * memory type and memory size.
++ *
++ * Note: the external API implementation, or the application, can
++ * express the memory types it is interested in by filling in the \ref
++ * mem_type field accordingly. On successful output, the memory type
++ * that fits best the request and that was used is updated in the \ref
++ * VABufferInfo data structure. If none of the supplied memory types
++ * is supported, then a \ref VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE
++ * error is returned.
++ *
++ * The \ref VABufferInfo data is valid until vaReleaseBufferHandle()
++ * is called. Besides, no additional operation is allowed on any of
++ * the buffer parent object until vaReleaseBufferHandle() is called.
++ * e.g. decoding into a VA surface backed with the supplied VA buffer
++ * object \ref buf_id would fail with a \ref VA_STATUS_ERROR_SURFACE_BUSY
++ * error.
++ *
++ * Possible errors:
++ * - \ref VA_STATUS_ERROR_UNIMPLEMENTED: the VA driver implementation
++ * does not support this interface
++ * - \ref VA_STATUS_ERROR_INVALID_DISPLAY: an invalid display was supplied
++ * - \ref VA_STATUS_ERROR_INVALID_BUFFER: an invalid buffer was supplied
++ * - \ref VA_STATUS_ERROR_UNSUPPORTED_BUFFERTYPE: the implementation
++ * does not support exporting buffers of the specified type
++ * - \ref VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE: none of the requested
++ * memory types in \ref VABufferInfo.mem_type was supported
++ *
++ * @param[in] dpy the VA display
++ * @param[in] buf_id the VA buffer
++ * @param[in,out] buf_info the associated VA buffer information
++ * @return VA_STATUS_SUCCESS if successful
++ */
++VAStatus
++vaAcquireBufferHandle(VADisplay dpy, VABufferID buf_id, VABufferInfo *buf_info);
++
++/**
++ * \brief Releases buffer after usage from external API
++ *
++ * Unlocks the VA buffer object \ref buf_id from external API usage like
++ * EGL or OpenCL (OCL). This function is a synchronization point. This
++ * means that any pending operation is guaranteed to be completed
++ * prior to returning from the function.
++ *
++ * The \ref VABufferInfo argument shall point to the original data
++ * structure that was obtained from vaAcquireBufferHandle(), unaltered.
++ * This is necessary so that the VA driver implementation could
++ * deallocate any resources that were needed.
++ *
++ * In any case, returning from this function invalidates any contents
++ * in \ref VABufferInfo. i.e. the underlyng buffer handle is no longer
++ * valid. Therefore, VA driver implementations are free to reset this
++ * data structure to safe defaults.
++ *
++ * Possible errors:
++ * - \ref VA_STATUS_ERROR_UNIMPLEMENTED: the VA driver implementation
++ * does not support this interface
++ * - \ref VA_STATUS_ERROR_INVALID_DISPLAY: an invalid display was supplied
++ * - \ref VA_STATUS_ERROR_INVALID_BUFFER: an invalid buffer was supplied
++ * - \ref VA_STATUS_ERROR_UNSUPPORTED_BUFFERTYPE: the implementation
++ * does not support exporting buffers of the specified type
++ *
++ * @param[in] dpy the VA display
++ * @param[in] buf_id the VA buffer
++ * @return VA_STATUS_SUCCESS if successful
++ */
++VAStatus
++vaReleaseBufferHandle(VADisplay dpy, VABufferID buf_id);
++
++/** @name vaExportSurfaceHandle() flags
++ *
++ * @{
++ */
++/** Export surface to be read by external API. */
++#define VA_EXPORT_SURFACE_READ_ONLY 0x0001
++/** Export surface to be written by external API. */
++#define VA_EXPORT_SURFACE_WRITE_ONLY 0x0002
++/** Export surface to be both read and written by external API. */
++#define VA_EXPORT_SURFACE_READ_WRITE 0x0003
++/** Export surface with separate layers.
++ *
++ * For example, NV12 surfaces should be exported as two separate
++ * planes for luma and chroma.
++ */
++#define VA_EXPORT_SURFACE_SEPARATE_LAYERS 0x0004
++/** Export surface with composed layers.
++ *
++ * For example, NV12 surfaces should be exported as a single NV12
++ * composed object.
++ */
++#define VA_EXPORT_SURFACE_COMPOSED_LAYERS 0x0008
++
++/** @} */
++
++/**
++ * \brief Export a handle to a surface for use with an external API
++ *
++ * The exported handles are owned by the caller, and the caller is
++ * responsible for freeing them when no longer needed (e.g. by closing
++ * DRM PRIME file descriptors).
++ *
++ * This does not perform any synchronisation. If the contents of the
++ * surface will be read, vaSyncSurface() must be called before doing so.
++ * If the contents of the surface are written, then all operations must
++ * be completed externally before using the surface again by via VA-API
++ * functions.
++ *
++ * @param[in] dpy VA display.
++ * @param[in] surface_id Surface to export.
++ * @param[in] mem_type Memory type to export to.
++ * @param[in] flags Combination of flags to apply
++ * (VA_EXPORT_SURFACE_*).
++ * @param[out] descriptor Pointer to the descriptor structure to fill
++ * with the handle details. The type of this structure depends on
++ * the value of mem_type.
++ *
++ * @return Status code:
++ * - VA_STATUS_SUCCESS: Success.
++ * - VA_STATUS_ERROR_INVALID_DISPLAY: The display is not valid.
++ * - VA_STATUS_ERROR_UNIMPLEMENTED: The driver does not implement
++ * this interface.
++ * - VA_STATUS_ERROR_INVALID_SURFACE: The surface is not valid, or
++ * the surface is not exportable in the specified way.
++ * - VA_STATUS_ERROR_UNSUPPORTED_MEMORY_TYPE: The driver does not
++ * support exporting surfaces to the specified memory type.
++ */
++VAStatus vaExportSurfaceHandle(VADisplay dpy,
++ VASurfaceID surface_id,
++ uint32_t mem_type, uint32_t flags,
++ void *descriptor);
++
++/**
++ * Render (Video Decode/Encode/Processing) Pictures
++ *
++ * A picture represents either a frame or a field.
++ *
++ * The Begin/Render/End sequence sends the video decode/encode/processing buffers
++ * to the server
++ */
++
++/**
++ * Get ready for a video pipeline
++ * - decode a picture to a target surface
++ * - encode a picture from a target surface
++ * - process a picture to a target surface
++ */
++VAStatus vaBeginPicture (
++ VADisplay dpy,
++ VAContextID context,
++ VASurfaceID render_target
++);
++
++/**
++ * Send video decode, encode or processing buffers to the server.
++ */
++VAStatus vaRenderPicture (
++ VADisplay dpy,
++ VAContextID context,
++ VABufferID *buffers,
++ int num_buffers
++);
++
++/**
++ * Make the end of rendering for a picture.
++ * The server should start processing all pending operations for this
++ * surface. This call is non-blocking. The client can start another
++ * Begin/Render/End sequence on a different render target.
++ * if VAContextID used in this function previously successfully passed
++ * vaMFAddContext call, real processing will be started during vaMFSubmit
++ */
++VAStatus vaEndPicture (
++ VADisplay dpy,
++ VAContextID context
++);
++
++/**
++ * Make the end of rendering for a pictures in contexts passed with submission.
++ * The server should start processing all pending operations for contexts.
++ * All contexts passed should be associated through vaMFAddContext
++ * and call sequence Begin/Render/End performed.
++ * This call is non-blocking. The client can start another
++ * Begin/Render/End/vaMFSubmit sequence on a different render targets.
++ * Return values:
++ * VA_STATUS_SUCCESS - operation successful, context was removed.
++ * VA_STATUS_ERROR_INVALID_CONTEXT - mf_context or one of contexts are invalid
++ * due to mf_context not created or one of contexts not assotiated with mf_context
++ * through vaAddContext.
++ * VA_STATUS_ERROR_INVALID_PARAMETER - one of context has not submitted it's frame
++ * through vaBeginPicture vaRenderPicture vaEndPicture call sequence.
++ * dpy: display
++ * mf_context: Multi-Frame context
++ * contexts: list of contexts submitting their tasks for multi-frame operation.
++ * num_contexts: number of passed contexts.
++ */
++VAStatus vaMFSubmit (
++ VADisplay dpy,
++ VAMFContextID mf_context,
++ VAContextID * contexts,
++ int num_contexts
++);
++
++/*
++
++Synchronization
++
++*/
++
++/**
++ * This function blocks until all pending operations on the render target
++ * have been completed. Upon return it is safe to use the render target for a
++ * different picture.
++ */
++VAStatus vaSyncSurface (
++ VADisplay dpy,
++ VASurfaceID render_target
++);
++
++typedef enum
++{
++ VASurfaceRendering = 1, /* Rendering in progress */
++ VASurfaceDisplaying = 2, /* Displaying in progress (not safe to render into it) */
++ /* this status is useful if surface is used as the source */
++ /* of an overlay */
++ VASurfaceReady = 4, /* not being rendered or displayed */
++ VASurfaceSkipped = 8 /* Indicate a skipped frame during encode */
++} VASurfaceStatus;
++
++/**
++ * Find out any pending ops on the render target
++ */
++VAStatus vaQuerySurfaceStatus (
++ VADisplay dpy,
++ VASurfaceID render_target,
++ VASurfaceStatus *status /* out */
++);
++
++typedef enum
++{
++ VADecodeSliceMissing = 0,
++ VADecodeMBError = 1,
++} VADecodeErrorType;
++
++/**
++ * Client calls vaQuerySurfaceError with VA_STATUS_ERROR_DECODING_ERROR, server side returns
++ * an array of structure VASurfaceDecodeMBErrors, and the array is terminated by setting status=-1
++*/
++typedef struct _VASurfaceDecodeMBErrors
++{
++ int32_t status; /* 1 if hardware has returned detailed info below, -1 means this record is invalid */
++ uint32_t start_mb; /* start mb address with errors */
++ uint32_t end_mb; /* end mb address with errors */
++ VADecodeErrorType decode_error_type;
++ uint32_t num_mb; /* number of mbs with errors */
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW - 1];
++} VASurfaceDecodeMBErrors;
++
++/**
++ * After the application gets VA_STATUS_ERROR_DECODING_ERROR after calling vaSyncSurface(),
++ * it can call vaQuerySurfaceError to find out further details on the particular error.
++ * VA_STATUS_ERROR_DECODING_ERROR should be passed in as "error_status",
++ * upon the return, error_info will point to an array of _VASurfaceDecodeMBErrors structure,
++ * which is allocated and filled by libVA with detailed information on the missing or error macroblocks.
++ * The array is terminated if "status==-1" is detected.
++ */
++VAStatus vaQuerySurfaceError(
++ VADisplay dpy,
++ VASurfaceID surface,
++ VAStatus error_status,
++ void **error_info
++);
++
++/**
++ * Images and Subpictures
++ * VAImage is used to either get the surface data to client memory, or
++ * to copy image data in client memory to a surface.
++ * Both images, subpictures and surfaces follow the same 2D coordinate system where origin
++ * is at the upper left corner with positive X to the right and positive Y down
++ */
++#define VA_FOURCC(ch0, ch1, ch2, ch3) \
++ ((unsigned long)(unsigned char) (ch0) | ((unsigned long)(unsigned char) (ch1) << 8) | \
++ ((unsigned long)(unsigned char) (ch2) << 16) | ((unsigned long)(unsigned char) (ch3) << 24 ))
++
++/* Pre-defined fourcc codes. */
++
++/** NV12: two-plane 8-bit YUV 4:2:0.
++ * The first plane contains Y, the second plane contains U and V in pairs of bytes.
++ */
++#define VA_FOURCC_NV12 0x3231564E
++/** NV21: two-plane 8-bit YUV 4:2:0.
++ * Same as NV12, but with U and V swapped.
++ */
++#define VA_FOURCC_NV21 0x3132564E
++
++/** AI44: packed 4-bit YA.
++ *
++ * The bottom half of each byte contains luma, the top half contains alpha.
++ */
++#define VA_FOURCC_AI44 0x34344149
++
++/** RGBA: packed 8-bit RGBA.
++ *
++ * Four bytes per pixel: red, green, blue, alpha.
++ */
++#define VA_FOURCC_RGBA 0x41424752
++/** RGBX: packed 8-bit RGB.
++ *
++ * Four bytes per pixel: red, green, blue, unspecified.
++ */
++#define VA_FOURCC_RGBX 0x58424752
++/** BGRA: packed 8-bit RGBA.
++ *
++ * Four bytes per pixel: blue, green, red, alpha.
++ */
++#define VA_FOURCC_BGRA 0x41524742
++/** BGRX: packed 8-bit RGB.
++ *
++ * Four bytes per pixel: blue, green, red, unspecified.
++ */
++#define VA_FOURCC_BGRX 0x58524742
++/** ARGB: packed 8-bit RGBA.
++ *
++ * Four bytes per pixel: alpha, red, green, blue.
++ */
++#define VA_FOURCC_ARGB 0x42475241
++/** XRGB: packed 8-bit RGB.
++ *
++ * Four bytes per pixel: unspecified, red, green, blue.
++ */
++#define VA_FOURCC_XRGB 0x42475258
++/** ABGR: packed 8-bit RGBA.
++ *
++ * Four bytes per pixel: alpha, blue, green, red.
++ */
++#define VA_FOURCC_ABGR 0x52474241
++/** XBGR: packed 8-bit RGB.
++ *
++ * Four bytes per pixel: unspecified, blue, green, red.
++ */
++#define VA_FOURCC_XBGR 0x52474258
++
++/** UYUV: packed 8-bit YUV 4:2:2.
++ *
++ * Four bytes per pair of pixels: U, Y, U, V.
++ */
++#define VA_FOURCC_UYVY 0x59565955
++/** YUY2: packed 8-bit YUV 4:2:2.
++ *
++ * Four bytes per pair of pixels: Y, U, Y, V.
++ */
++#define VA_FOURCC_YUY2 0x32595559
++/** AYUV: packed 8-bit YUVA 4:4:4.
++ *
++ * Four bytes per pixel: A, Y, U, V.
++ */
++#define VA_FOURCC_AYUV 0x56555941
++/** NV11: two-plane 8-bit YUV 4:1:1.
++ *
++ * The first plane contains Y, the second plane contains U and V in pairs of bytes.
++ */
++#define VA_FOURCC_NV11 0x3131564e
++/** YV12: three-plane 8-bit YUV 4:2:0.
++ *
++ * The three planes contain Y, V and U respectively.
++ */
++#define VA_FOURCC_YV12 0x32315659
++/** P208: two-plane 8-bit YUV 4:2:2.
++ *
++ * The first plane contains Y, the second plane contains U and V in pairs of bytes.
++ */
++#define VA_FOURCC_P208 0x38303250
++/** I420: three-plane 8-bit YUV 4:2:0.
++ *
++ * The three planes contain Y, U and V respectively.
++ */
++#define VA_FOURCC_I420 0x30323449
++/** YV24: three-plane 8-bit YUV 4:4:4.
++ *
++ * The three planes contain Y, V and U respectively.
++ */
++#define VA_FOURCC_YV24 0x34325659
++/** YV32: four-plane 8-bit YUVA 4:4:4
++ *
++ * The four planes contain Y, V, U and A respectively.
++ */
++#define VA_FOURCC_YV32 0x32335659
++/** Y800: 8-bit greyscale.
++ */
++#define VA_FOURCC_Y800 0x30303859
++/** IMC3: three-plane 8-bit YUV 4:2:0.
++ *
++ * Equivalent to YV12, but with the additional constraint that the pitch of all three planes
++ * must be the same.
++ */
++#define VA_FOURCC_IMC3 0x33434D49
++/** 411P: three-plane 8-bit YUV 4:1:1.
++ *
++ * The three planes contain Y, U and V respectively.
++ */
++#define VA_FOURCC_411P 0x50313134
++/** 411R: three-plane 8-bit YUV.
++ *
++ * The subsampling is the transpose of 4:1:1 - full chroma appears on every fourth line.
++ * The three planes contain Y, U and V respectively.
++ */
++#define VA_FOURCC_411R 0x52313134
++/** 422H: three-plane 8-bit YUV 4:2:2.
++ *
++ * The three planes contain Y, U and V respectively.
++ */
++#define VA_FOURCC_422H 0x48323234
++/** 422V: three-plane 8-bit YUV 4:4:0.
++ *
++ * The three planes contain Y, U and V respectively.
++ */
++#define VA_FOURCC_422V 0x56323234
++/** 444P: three-plane 8-bit YUV 4:4:4.
++ *
++ * The three planes contain Y, U and V respectively.
++ */
++#define VA_FOURCC_444P 0x50343434
++
++/** RGBP: three-plane 8-bit RGB.
++ *
++ * The three planes contain red, green and blue respectively.
++ */
++#define VA_FOURCC_RGBP 0x50424752
++/** BGRP: three-plane 8-bit RGB.
++ *
++ * The three planes contain blue, green and red respectively.
++ */
++#define VA_FOURCC_BGRP 0x50524742
++/** RG16: packed 5/6-bit RGB.
++ *
++ * Each pixel is a two-byte little-endian value.
++ * Red, green and blue are found in bits 15:11, 10:5, 4:0 respectively.
++ */
++#define VA_FOURCC_RGB565 0x36314752
++/** BG16: packed 5/6-bit RGB.
++ *
++ * Each pixel is a two-byte little-endian value.
++ * Blue, green and red are found in bits 15:11, 10:5, 4:0 respectively.
++ */
++#define VA_FOURCC_BGR565 0x36314742
++
++/** Y210: packed 10-bit YUV 4:2:2.
++ *
++ * Eight bytes represent a pair of pixels. Each sample is a two-byte little-endian value,
++ * with the bottom six bits ignored. The samples are in the order Y, U, Y, V.
++ */
++#define VA_FOURCC_Y210 0x30313259
++/** Y216: packed 16-bit YUV 4:2:2.
++ *
++ * Eight bytes represent a pair of pixels. Each sample is a two-byte little-endian value.
++ * The samples are in the order Y, U, Y, V.
++ */
++#define VA_FOURCC_Y216 0x36313259
++/** Y410: packed 10-bit YUVA 4:4:4.
++ *
++ * Each pixel is a four-byte little-endian value.
++ * A, V, Y, U are found in bits 31:30, 29:20, 19:10, 9:0 respectively.
++ */
++#define VA_FOURCC_Y410 0x30313459
++/** Y416: packed 16-bit YUVA 4:4:4.
++ *
++ * Each pixel is a set of four samples, each of which is a two-byte little-endian value.
++ * The samples are in the order A, V, Y, U.
++ */
++#define VA_FOURCC_Y416 0x36313459
++
++/** YV16: three-plane 8-bit YUV 4:2:2.
++ *
++ * The three planes contain Y, V and U respectively.
++ */
++#define VA_FOURCC_YV16 0x36315659
++/** P010: two-plane 10-bit YUV 4:2:0.
++ *
++ * Each sample is a two-byte little-endian value with the bottom six bits ignored.
++ * The first plane contains Y, the second plane contains U and V in pairs of samples.
++ */
++#define VA_FOURCC_P010 0x30313050
++/** P016: two-plane 16-bit YUV 4:2:0.
++ *
++ * Each sample is a two-byte little-endian value. The first plane contains Y, the second
++ * plane contains U and V in pairs of samples.
++ */
++#define VA_FOURCC_P016 0x36313050
++
++/** I010: three-plane 10-bit YUV 4:2:0.
++ *
++ * Each sample is a two-byte little-endian value with the top six bits ignored.
++ * The three planes contain Y, V and U respectively.
++ */
++#define VA_FOURCC_I010 0x30313049
++
++/** IYUV: three-plane 8-bit YUV 4:2:0.
++ *
++ * @deprecated Use I420 instead.
++ */
++#define VA_FOURCC_IYUV 0x56555949
++/**
++ * 10-bit Pixel RGB formats.
++ */
++#define VA_FOURCC_A2R10G10B10 0x30335241 /* VA_FOURCC('A','R','3','0') */
++/**
++ * 10-bit Pixel BGR formats.
++ */
++#define VA_FOURCC_A2B10G10R10 0x30334241 /* VA_FOURCC('A','B','3','0') */
++
++/** Y8: 8-bit greyscale.
++ *
++ * Only a single sample, 8 bit Y plane for monochrome images
++ */
++#define VA_FOURCC_Y8 0x20203859
++/** Y16: 16-bit greyscale.
++ *
++ * Only a single sample, 16 bit Y plane for monochrome images
++ */
++#define VA_FOURCC_Y16 0x20363159
++/** VYUV: packed 8-bit YUV 4:2:2.
++ *
++ * Four bytes per pair of pixels: V, Y, U, V.
++ */
++#define VA_FOURCC_VYUY 0x59555956
++/** YVYU: packed 8-bit YUV 4:2:2.
++ *
++ * Four bytes per pair of pixels: Y, V, Y, U.
++ */
++#define VA_FOURCC_YVYU 0x55595659
++/** AGRB64: three-plane 16-bit ARGB 16:16:16:16
++ *
++ * The four planes contain: alpha, red, green, blue respectively.
++ */
++#define VA_FOURCC_ARGB64 0x34475241
++/** ABGR64: three-plane 16-bit ABGR 16:16:16:16
++ *
++ * The four planes contain: alpha, blue, green, red respectively.
++ */
++#define VA_FOURCC_ABGR64 0x34474241
++
++/* byte order */
++#define VA_LSB_FIRST 1
++#define VA_MSB_FIRST 2
++
++typedef struct _VAImageFormat
++{
++ uint32_t fourcc;
++ uint32_t byte_order; /* VA_LSB_FIRST, VA_MSB_FIRST */
++ uint32_t bits_per_pixel;
++ /* for RGB formats */
++ uint32_t depth; /* significant bits per pixel */
++ uint32_t red_mask;
++ uint32_t green_mask;
++ uint32_t blue_mask;
++ uint32_t alpha_mask;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAImageFormat;
++
++typedef VAGenericID VAImageID;
++
++typedef struct _VAImage
++{
++ VAImageID image_id; /* uniquely identify this image */
++ VAImageFormat format;
++ VABufferID buf; /* image data buffer */
++ /*
++ * Image data will be stored in a buffer of type VAImageBufferType to facilitate
++ * data store on the server side for optimal performance. The buffer will be
++ * created by the CreateImage function, and proper storage allocated based on the image
++ * size and format. This buffer is managed by the library implementation, and
++ * accessed by the client through the buffer Map/Unmap functions.
++ */
++ uint16_t width;
++ uint16_t height;
++ uint32_t data_size;
++ uint32_t num_planes; /* can not be greater than 3 */
++ /*
++ * An array indicating the scanline pitch in bytes for each plane.
++ * Each plane may have a different pitch. Maximum 3 planes for planar formats
++ */
++ uint32_t pitches[3];
++ /*
++ * An array indicating the byte offset from the beginning of the image data
++ * to the start of each plane.
++ */
++ uint32_t offsets[3];
++
++ /* The following fields are only needed for paletted formats */
++ int32_t num_palette_entries; /* set to zero for non-palette images */
++ /*
++ * Each component is one byte and entry_bytes indicates the number of components in
++ * each entry (eg. 3 for YUV palette entries). set to zero for non-palette images
++ */
++ int32_t entry_bytes;
++ /*
++ * An array of ascii characters describing the order of the components within the bytes.
++ * Only entry_bytes characters of the string are used.
++ */
++ int8_t component_order[4];
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAImage;
++
++/** Get maximum number of image formats supported by the implementation */
++int vaMaxNumImageFormats (
++ VADisplay dpy
++);
++
++/**
++ * Query supported image formats
++ * The caller must provide a "format_list" array that can hold at
++ * least vaMaxNumImageFormats() entries. The actual number of formats
++ * returned in "format_list" is returned in "num_formats".
++ */
++VAStatus vaQueryImageFormats (
++ VADisplay dpy,
++ VAImageFormat *format_list, /* out */
++ int *num_formats /* out */
++);
++
++/**
++ * Create a VAImage structure
++ * The width and height fields returned in the VAImage structure may get
++ * enlarged for some YUV formats. Upon return from this function,
++ * image->buf has been created and proper storage allocated by the library.
++ * The client can access the image through the Map/Unmap calls.
++ */
++VAStatus vaCreateImage (
++ VADisplay dpy,
++ VAImageFormat *format,
++ int width,
++ int height,
++ VAImage *image /* out */
++);
++
++/**
++ * Should call DestroyImage before destroying the surface it is bound to
++ */
++VAStatus vaDestroyImage (
++ VADisplay dpy,
++ VAImageID image
++);
++
++VAStatus vaSetImagePalette (
++ VADisplay dpy,
++ VAImageID image,
++ /*
++ * pointer to an array holding the palette data. The size of the array is
++ * num_palette_entries * entry_bytes in size. The order of the components
++ * in the palette is described by the component_order in VAImage struct
++ */
++ unsigned char *palette
++);
++
++/**
++ * Retrive surface data into a VAImage
++ * Image must be in a format supported by the implementation
++ */
++VAStatus vaGetImage (
++ VADisplay dpy,
++ VASurfaceID surface,
++ int x, /* coordinates of the upper left source pixel */
++ int y,
++ unsigned int width, /* width and height of the region */
++ unsigned int height,
++ VAImageID image
++);
++
++/**
++ * Copy data from a VAImage to a surface
++ * Image must be in a format supported by the implementation
++ * Returns a VA_STATUS_ERROR_SURFACE_BUSY if the surface
++ * shouldn't be rendered into when this is called
++ */
++VAStatus vaPutImage (
++ VADisplay dpy,
++ VASurfaceID surface,
++ VAImageID image,
++ int src_x,
++ int src_y,
++ unsigned int src_width,
++ unsigned int src_height,
++ int dest_x,
++ int dest_y,
++ unsigned int dest_width,
++ unsigned int dest_height
++);
++
++/**
++ * Derive an VAImage from an existing surface.
++ * This interface will derive a VAImage and corresponding image buffer from
++ * an existing VA Surface. The image buffer can then be mapped/unmapped for
++ * direct CPU access. This operation is only possible on implementations with
++ * direct rendering capabilities and internal surface formats that can be
++ * represented with a VAImage. When the operation is not possible this interface
++ * will return VA_STATUS_ERROR_OPERATION_FAILED. Clients should then fall back
++ * to using vaCreateImage + vaPutImage to accomplish the same task in an
++ * indirect manner.
++ *
++ * Implementations should only return success when the resulting image buffer
++ * would be useable with vaMap/Unmap.
++ *
++ * When directly accessing a surface special care must be taken to insure
++ * proper synchronization with the graphics hardware. Clients should call
++ * vaQuerySurfaceStatus to insure that a surface is not the target of concurrent
++ * rendering or currently being displayed by an overlay.
++ *
++ * Additionally nothing about the contents of a surface should be assumed
++ * following a vaPutSurface. Implementations are free to modify the surface for
++ * scaling or subpicture blending within a call to vaPutImage.
++ *
++ * Calls to vaPutImage or vaGetImage using the same surface from which the image
++ * has been derived will return VA_STATUS_ERROR_SURFACE_BUSY. vaPutImage or
++ * vaGetImage with other surfaces is supported.
++ *
++ * An image created with vaDeriveImage should be freed with vaDestroyImage. The
++ * image and image buffer structures will be destroyed; however, the underlying
++ * surface will remain unchanged until freed with vaDestroySurfaces.
++ */
++VAStatus vaDeriveImage (
++ VADisplay dpy,
++ VASurfaceID surface,
++ VAImage *image /* out */
++);
++
++/**
++ * Subpictures
++ * Subpicture is a special type of image that can be blended
++ * with a surface during vaPutSurface(). Subpicture can be used to render
++ * DVD sub-titles or closed captioning text etc.
++ */
++
++typedef VAGenericID VASubpictureID;
++
++/** Get maximum number of subpicture formats supported by the implementation */
++int vaMaxNumSubpictureFormats (
++ VADisplay dpy
++);
++
++/** flags for subpictures */
++#define VA_SUBPICTURE_CHROMA_KEYING 0x0001
++#define VA_SUBPICTURE_GLOBAL_ALPHA 0x0002
++#define VA_SUBPICTURE_DESTINATION_IS_SCREEN_COORD 0x0004
++/**
++ * Query supported subpicture formats
++ * The caller must provide a "format_list" array that can hold at
++ * least vaMaxNumSubpictureFormats() entries. The flags arrary holds the flag
++ * for each format to indicate additional capabilities for that format. The actual
++ * number of formats returned in "format_list" is returned in "num_formats".
++ * flags: returned value to indicate addtional capabilities
++ * VA_SUBPICTURE_CHROMA_KEYING - supports chroma-keying
++ * VA_SUBPICTURE_GLOBAL_ALPHA - supports global alpha
++ * VA_SUBPICTURE_DESTINATION_IS_SCREEN_COORD - supports unscaled screen relative subpictures for On Screen Display
++ */
++
++VAStatus vaQuerySubpictureFormats (
++ VADisplay dpy,
++ VAImageFormat *format_list, /* out */
++ unsigned int *flags, /* out */
++ unsigned int *num_formats /* out */
++);
++
++/**
++ * Subpictures are created with an image associated.
++ */
++VAStatus vaCreateSubpicture (
++ VADisplay dpy,
++ VAImageID image,
++ VASubpictureID *subpicture /* out */
++);
++
++/**
++ * Destroy the subpicture before destroying the image it is assocated to
++ */
++VAStatus vaDestroySubpicture (
++ VADisplay dpy,
++ VASubpictureID subpicture
++);
++
++/**
++ * Bind an image to the subpicture. This image will now be associated with
++ * the subpicture instead of the one at creation.
++ */
++VAStatus vaSetSubpictureImage (
++ VADisplay dpy,
++ VASubpictureID subpicture,
++ VAImageID image
++);
++
++/**
++ * If chromakey is enabled, then the area where the source value falls within
++ * the chromakey [min, max] range is transparent
++ * The chromakey component format is the following:
++ * For RGB: [0:7] Red [8:15] Blue [16:23] Green
++ * For YUV: [0:7] V [8:15] U [16:23] Y
++ * The chromakey mask can be used to mask out certain components for chromakey
++ * comparision
++ */
++VAStatus vaSetSubpictureChromakey (
++ VADisplay dpy,
++ VASubpictureID subpicture,
++ unsigned int chromakey_min,
++ unsigned int chromakey_max,
++ unsigned int chromakey_mask
++);
++
++/**
++ * Global alpha value is between 0 and 1. A value of 1 means fully opaque and
++ * a value of 0 means fully transparent. If per-pixel alpha is also specified then
++ * the overall alpha is per-pixel alpha multiplied by the global alpha
++ */
++VAStatus vaSetSubpictureGlobalAlpha (
++ VADisplay dpy,
++ VASubpictureID subpicture,
++ float global_alpha
++);
++
++/**
++ * vaAssociateSubpicture associates the subpicture with target_surfaces.
++ * It defines the region mapping between the subpicture and the target
++ * surfaces through source and destination rectangles (with the same width and height).
++ * Both will be displayed at the next call to vaPutSurface. Additional
++ * associations before the call to vaPutSurface simply overrides the association.
++ */
++VAStatus vaAssociateSubpicture (
++ VADisplay dpy,
++ VASubpictureID subpicture,
++ VASurfaceID *target_surfaces,
++ int num_surfaces,
++ int16_t src_x, /* upper left offset in subpicture */
++ int16_t src_y,
++ uint16_t src_width,
++ uint16_t src_height,
++ int16_t dest_x, /* upper left offset in surface */
++ int16_t dest_y,
++ uint16_t dest_width,
++ uint16_t dest_height,
++ /*
++ * whether to enable chroma-keying, global-alpha, or screen relative mode
++ * see VA_SUBPICTURE_XXX values
++ */
++ uint32_t flags
++);
++
++/**
++ * vaDeassociateSubpicture removes the association of the subpicture with target_surfaces.
++ */
++VAStatus vaDeassociateSubpicture (
++ VADisplay dpy,
++ VASubpictureID subpicture,
++ VASurfaceID *target_surfaces,
++ int num_surfaces
++);
++
++/**
++ * Display attributes
++ * Display attributes are used to control things such as contrast, hue, saturation,
++ * brightness etc. in the rendering process. The application can query what
++ * attributes are supported by the driver, and then set the appropriate attributes
++ * before calling vaPutSurface()
++ */
++/* PowerVR IEP Lite attributes */
++typedef enum
++{
++ VADISPLAYATTRIB_BLE_OFF = 0x00,
++ VADISPLAYATTRIB_BLE_LOW,
++ VADISPLAYATTRIB_BLE_MEDIUM,
++ VADISPLAYATTRIB_BLE_HIGH,
++ VADISPLAYATTRIB_BLE_NONE,
++} VADisplayAttribBLEMode;
++
++/** attribute value for VADisplayAttribRotation */
++#define VA_ROTATION_NONE 0x00000000
++#define VA_ROTATION_90 0x00000001
++#define VA_ROTATION_180 0x00000002
++#define VA_ROTATION_270 0x00000003
++/**@}*/
++
++/**
++ * @name Mirroring directions
++ *
++ * Those values could be used for VADisplayAttribMirror attribute or
++ * VAProcPipelineParameterBuffer::mirror_state.
++
++ */
++/**@{*/
++/** \brief No Mirroring. */
++#define VA_MIRROR_NONE 0x00000000
++/** \brief Horizontal Mirroring. */
++#define VA_MIRROR_HORIZONTAL 0x00000001
++/** \brief Vertical Mirroring. */
++#define VA_MIRROR_VERTICAL 0x00000002
++/**@}*/
++
++/** attribute value for VADisplayAttribOutOfLoopDeblock */
++#define VA_OOL_DEBLOCKING_FALSE 0x00000000
++#define VA_OOL_DEBLOCKING_TRUE 0x00000001
++
++/** Render mode */
++#define VA_RENDER_MODE_UNDEFINED 0
++#define VA_RENDER_MODE_LOCAL_OVERLAY 1
++#define VA_RENDER_MODE_LOCAL_GPU 2
++#define VA_RENDER_MODE_EXTERNAL_OVERLAY 4
++#define VA_RENDER_MODE_EXTERNAL_GPU 8
++
++/** Render device */
++#define VA_RENDER_DEVICE_UNDEFINED 0
++#define VA_RENDER_DEVICE_LOCAL 1
++#define VA_RENDER_DEVICE_EXTERNAL 2
++
++/** Currently defined display attribute types */
++typedef enum
++{
++ VADisplayAttribBrightness = 0,
++ VADisplayAttribContrast = 1,
++ VADisplayAttribHue = 2,
++ VADisplayAttribSaturation = 3,
++ /* client can specifiy a background color for the target window
++ * the new feature of video conference,
++ * the uncovered area of the surface is filled by this color
++ * also it will blend with the decoded video color
++ */
++ VADisplayAttribBackgroundColor = 4,
++ /*
++ * this is a gettable only attribute. For some implementations that use the
++ * hardware overlay, after PutSurface is called, the surface can not be
++ * re-used until after the subsequent PutSurface call. If this is the case
++ * then the value for this attribute will be set to 1 so that the client
++ * will not attempt to re-use the surface right after returning from a call
++ * to PutSurface.
++ *
++ * Don't use it, use flag VASurfaceDisplaying of vaQuerySurfaceStatus since
++ * driver may use overlay or GPU alternatively
++ */
++ VADisplayAttribDirectSurface = 5,
++ VADisplayAttribRotation = 6,
++ VADisplayAttribOutofLoopDeblock = 7,
++
++ /* PowerVR IEP Lite specific attributes */
++ VADisplayAttribBLEBlackMode = 8,
++ VADisplayAttribBLEWhiteMode = 9,
++ VADisplayAttribBlueStretch = 10,
++ VADisplayAttribSkinColorCorrection = 11,
++ /*
++ * For type VADisplayAttribCSCMatrix, "value" field is a pointer to the color
++ * conversion matrix. Each element in the matrix is float-point
++ */
++ VADisplayAttribCSCMatrix = 12,
++ /* specify the constant color used to blend with video surface
++ * Cd = Cv*Cc*Ac + Cb *(1 - Ac) C means the constant RGB
++ * d: the final color to overwrite into the frame buffer
++ * v: decoded video after color conversion,
++ * c: video color specified by VADisplayAttribBlendColor
++ * b: background color of the drawable
++ */
++ VADisplayAttribBlendColor = 13,
++ /*
++ * Indicate driver to skip painting color key or not.
++ * only applicable if the render is overlay
++ */
++ VADisplayAttribOverlayAutoPaintColorKey = 14,
++ /*
++ * customized overlay color key, the format is RGB888
++ * [23:16] = Red, [15:08] = Green, [07:00] = Blue.
++ */
++ VADisplayAttribOverlayColorKey = 15,
++ /*
++ * The hint for the implementation of vaPutSurface
++ * normally, the driver could use an overlay or GPU to render the surface on the screen
++ * this flag provides APP the flexibity to switch the render dynamically
++ */
++ VADisplayAttribRenderMode = 16,
++ /*
++ * specify if vaPutSurface needs to render into specified monitors
++ * one example is that one external monitor (e.g. HDMI) is enabled,
++ * but the window manager is not aware of it, and there is no associated drawable
++ */
++ VADisplayAttribRenderDevice = 17,
++ /*
++ * specify vaPutSurface render area if there is no drawable on the monitor
++ */
++ VADisplayAttribRenderRect = 18,
++} VADisplayAttribType;
++
++/* flags for VADisplayAttribute */
++#define VA_DISPLAY_ATTRIB_NOT_SUPPORTED 0x0000
++#define VA_DISPLAY_ATTRIB_GETTABLE 0x0001
++#define VA_DISPLAY_ATTRIB_SETTABLE 0x0002
++
++typedef struct _VADisplayAttribute
++{
++ VADisplayAttribType type;
++ int32_t min_value;
++ int32_t max_value;
++ int32_t value; /* used by the set/get attribute functions */
++/* flags can be VA_DISPLAY_ATTRIB_GETTABLE or VA_DISPLAY_ATTRIB_SETTABLE or OR'd together */
++ uint32_t flags;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VADisplayAttribute;
++
++/** Get maximum number of display attributs supported by the implementation */
++int vaMaxNumDisplayAttributes (
++ VADisplay dpy
++);
++
++/**
++ * Query display attributes
++ * The caller must provide a "attr_list" array that can hold at
++ * least vaMaxNumDisplayAttributes() entries. The actual number of attributes
++ * returned in "attr_list" is returned in "num_attributes".
++ */
++VAStatus vaQueryDisplayAttributes (
++ VADisplay dpy,
++ VADisplayAttribute *attr_list, /* out */
++ int *num_attributes /* out */
++);
++
++/**
++ * Get display attributes
++ * This function returns the current attribute values in "attr_list".
++ * Only attributes returned with VA_DISPLAY_ATTRIB_GETTABLE set in the "flags" field
++ * from vaQueryDisplayAttributes() can have their values retrieved.
++ */
++VAStatus vaGetDisplayAttributes (
++ VADisplay dpy,
++ VADisplayAttribute *attr_list, /* in/out */
++ int num_attributes
++);
++
++/**
++ * Set display attributes
++ * Only attributes returned with VA_DISPLAY_ATTRIB_SETTABLE set in the "flags" field
++ * from vaQueryDisplayAttributes() can be set. If the attribute is not settable or
++ * the value is out of range, the function returns VA_STATUS_ERROR_ATTR_NOT_SUPPORTED
++ */
++VAStatus vaSetDisplayAttributes (
++ VADisplay dpy,
++ VADisplayAttribute *attr_list,
++ int num_attributes
++);
++
++/****************************
++ * HEVC data structures
++ ****************************/
++/**
++ * \brief Description of picture properties of those in DPB surfaces.
++ *
++ * If only progressive scan is supported, each surface contains one whole
++ * frame picture.
++ * Otherwise, each surface contains two fields of whole picture.
++ * In this case, two entries of ReferenceFrames[] may share same picture_id
++ * value.
++ */
++typedef struct _VAPictureHEVC
++{
++ /** \brief reconstructed picture buffer surface index
++ * invalid when taking value VA_INVALID_SURFACE.
++ */
++ VASurfaceID picture_id;
++ /** \brief picture order count.
++ * in HEVC, POCs for top and bottom fields of same picture should
++ * take different values.
++ */
++ int32_t pic_order_cnt;
++ /* described below */
++ uint32_t flags;
++
++ /** \brief Reserved bytes for future use, must be zero */
++ uint32_t va_reserved[VA_PADDING_LOW];
++} VAPictureHEVC;
++
++/* flags in VAPictureHEVC could be OR of the following */
++#define VA_PICTURE_HEVC_INVALID 0x00000001
++/** \brief indication of interlace scan picture.
++ * should take same value for all the pictures in sequence.
++ */
++#define VA_PICTURE_HEVC_FIELD_PIC 0x00000002
++/** \brief polarity of the field picture.
++ * top field takes even lines of buffer surface.
++ * bottom field takes odd lines of buffer surface.
++ */
++#define VA_PICTURE_HEVC_BOTTOM_FIELD 0x00000004
++/** \brief Long term reference picture */
++#define VA_PICTURE_HEVC_LONG_TERM_REFERENCE 0x00000008
++/**
++ * VA_PICTURE_HEVC_RPS_ST_CURR_BEFORE, VA_PICTURE_HEVC_RPS_ST_CURR_AFTER
++ * and VA_PICTURE_HEVC_RPS_LT_CURR of any picture in ReferenceFrames[] should
++ * be exclusive. No more than one of them can be set for any picture.
++ * Sum of NumPocStCurrBefore, NumPocStCurrAfter and NumPocLtCurr
++ * equals NumPocTotalCurr, which should be equal to or smaller than 8.
++ * Application should provide valid values for both short format and long format.
++ * The pictures in DPB with any of these three flags turned on are referred by
++ * the current picture.
++ */
++/** \brief RefPicSetStCurrBefore of HEVC spec variable
++ * Number of ReferenceFrames[] entries with this bit set equals
++ * NumPocStCurrBefore.
++ */
++#define VA_PICTURE_HEVC_RPS_ST_CURR_BEFORE 0x00000010
++/** \brief RefPicSetStCurrAfter of HEVC spec variable
++ * Number of ReferenceFrames[] entries with this bit set equals
++ * NumPocStCurrAfter.
++ */
++#define VA_PICTURE_HEVC_RPS_ST_CURR_AFTER 0x00000020
++/** \brief RefPicSetLtCurr of HEVC spec variable
++ * Number of ReferenceFrames[] entries with this bit set equals
++ * NumPocLtCurr.
++ */
++#define VA_PICTURE_HEVC_RPS_LT_CURR 0x00000040
++
++//#include <va/va_dec_hevc.h>
++//#include <va/va_dec_jpeg.h>
++#include "va_dec_vp8.h"
++#include "va_dec_vp9.h"
++//#include <va/va_enc_hevc.h>
++//#include <va/va_fei_hevc.h>
++//#include <va/va_enc_h264.h>
++//#include <va/va_enc_jpeg.h>
++//#include <va/va_enc_mpeg2.h>
++//#include <va/va_enc_vp8.h>
++//#include <va/va_enc_vp9.h>
++//#include <va/va_fei.h>
++//#include <va/va_fei_h264.h>
++//#include <va/va_vpp.h>
++
++/**@}*/
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _VA_H_ */
+diff -up firefox-84.0/media/ffvpx/va/va.patch.ffvpx firefox-84.0/media/ffvpx/va/va.patch
+--- firefox-84.0/media/ffvpx/va/va.patch.ffvpx 2020-12-10 17:05:06.121983932 +0100
++++ firefox-84.0/media/ffvpx/va/va.patch 2020-12-10 17:05:06.121983932 +0100
+@@ -0,0 +1,33 @@
++--- va.h.old 2020-10-22 10:41:57.805112031 +0200
+++++ va.h 2020-10-22 10:37:22.597088670 +0200
++@@ -4613,18 +4613,18 @@
++ #define VA_PICTURE_HEVC_RPS_LT_CURR 0x00000040
++
++-#include <va/va_dec_hevc.h>
++-#include <va/va_dec_jpeg.h>
+++//#include <va/va_dec_hevc.h>
+++//#include <va/va_dec_jpeg.h>
++ #include "va_dec_vp8.h"
++ #include "va_dec_vp9.h"
++-#include <va/va_enc_hevc.h>
++-#include <va/va_fei_hevc.h>
++-#include <va/va_enc_h264.h>
++-#include <va/va_enc_jpeg.h>
++-#include <va/va_enc_mpeg2.h>
++-#include <va/va_enc_vp8.h>
++-#include <va/va_enc_vp9.h>
++-#include <va/va_fei.h>
++-#include <va/va_fei_h264.h>
++-#include <va/va_vpp.h>
+++//#include <va/va_enc_hevc.h>
+++//#include <va/va_fei_hevc.h>
+++//#include <va/va_enc_h264.h>
+++//#include <va/va_enc_jpeg.h>
+++//#include <va/va_enc_mpeg2.h>
+++//#include <va/va_enc_vp8.h>
+++//#include <va/va_enc_vp9.h>
+++//#include <va/va_fei.h>
+++//#include <va/va_fei_h264.h>
+++//#include <va/va_vpp.h>
++
++ /**@}*/
+diff -up firefox-84.0/media/ffvpx/va/va_version.h.ffvpx firefox-84.0/media/ffvpx/va/va_version.h
+--- firefox-84.0/media/ffvpx/va/va_version.h.ffvpx 2020-12-10 17:05:06.121983932 +0100
++++ firefox-84.0/media/ffvpx/va/va_version.h 2020-12-10 17:05:06.121983932 +0100
+@@ -0,0 +1,87 @@
++/*
++ * Copyright (C) 2009 Splitted-Desktop Systems. All Rights Reserved.
++ *
++ * Permission is hereby granted, free of charge, to any person obtaining a
++ * copy of this software and associated documentation files (the
++ * "Software"), to deal in the Software without restriction, including
++ * without limitation the rights to use, copy, modify, merge, publish,
++ * distribute, sub license, and/or sell copies of the Software, and to
++ * permit persons to whom the Software is furnished to do so, subject to
++ * the following conditions:
++ *
++ * The above copyright notice and this permission notice (including the
++ * next paragraph) shall be included in all copies or substantial portions
++ * of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
++ * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
++ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
++ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
++ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#ifndef VA_VERSION_H
++#define VA_VERSION_H
++
++/**
++ * VA_MAJOR_VERSION:
++ *
++ * The major version of VA-API (1, if %VA_VERSION is 1.2.3)
++ */
++#define VA_MAJOR_VERSION 1
++
++/**
++ * VA_MINOR_VERSION:
++ *
++ * The minor version of VA-API (2, if %VA_VERSION is 1.2.3)
++ */
++#define VA_MINOR_VERSION 7
++
++/**
++ * VA_MICRO_VERSION:
++ *
++ * The micro version of VA-API (3, if %VA_VERSION is 1.2.3)
++ */
++#define VA_MICRO_VERSION 0
++
++/**
++ * VA_VERSION:
++ *
++ * The full version of VA-API, like 1.2.3
++ */
++#define VA_VERSION 1.7.0
++
++/**
++ * VA_VERSION_S:
++ *
++ * The full version of VA-API, in string form (suited for string
++ * concatenation)
++ */
++#define VA_VERSION_S "1.7.0"
++
++/**
++ * VA_VERSION_HEX:
++ *
++ * Numerically encoded version of VA-API, like 0x010203
++ */
++#define VA_VERSION_HEX ((VA_MAJOR_VERSION << 24) | \
++ (VA_MINOR_VERSION << 16) | \
++ (VA_MICRO_VERSION << 8))
++
++/**
++ * VA_CHECK_VERSION:
++ * @major: major version, like 1 in 1.2.3
++ * @minor: minor version, like 2 in 1.2.3
++ * @micro: micro version, like 3 in 1.2.3
++ *
++ * Evaluates to %TRUE if the version of VA-API is greater than
++ * @major, @minor and @micro
++ */
++#define VA_CHECK_VERSION(major,minor,micro) \
++ (VA_MAJOR_VERSION > (major) || \
++ (VA_MAJOR_VERSION == (major) && VA_MINOR_VERSION > (minor)) || \
++ (VA_MAJOR_VERSION == (major) && VA_MINOR_VERSION == (minor) && VA_MICRO_VERSION >= (micro)))
++
++#endif /* VA_VERSION_H */
+diff -up firefox-84.0/widget/gtk/DMABufSurface.h.ffvpx firefox-84.0/widget/gtk/DMABufSurface.h
+--- firefox-84.0/widget/gtk/DMABufSurface.h.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/widget/gtk/DMABufSurface.h 2020-12-10 17:05:06.121983932 +0100
+@@ -8,10 +8,9 @@
+ #define DMABufSurface_h__
+
+ #include <stdint.h>
+-#include "GLContext.h"
+-#include "GLContextTypes.h"
+ #include "mozilla/widget/nsWaylandDisplay.h"
+ #include "mozilla/widget/va_drmcommon.h"
++#include "GLTypes.h"
+
+ typedef void* EGLImageKHR;
+ typedef void* EGLSyncKHR;
+@@ -23,6 +22,9 @@ namespace layers {
+ class SurfaceDescriptor;
+ class SurfaceDescriptorDMABuf;
+ } // namespace layers
++namespace gl {
++class GLContext;
++}
+ } // namespace mozilla
+
+ typedef enum {
+diff -up firefox-84.0/widget/gtk/nsWaylandDisplay.cpp.ffvpx firefox-84.0/widget/gtk/nsWaylandDisplay.cpp
+--- firefox-84.0/widget/gtk/nsWaylandDisplay.cpp.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/widget/gtk/nsWaylandDisplay.cpp 2020-12-10 17:05:06.121983932 +0100
+@@ -6,6 +6,10 @@
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+ #include "nsWaylandDisplay.h"
++
++#include "base/message_loop.h" // for MessageLoop
++#include "base/task.h" // for NewRunnableMethod, etc
++#include "mozilla/StaticMutex.h"
+ #include "mozilla/StaticPrefs_widget.h"
+
+ namespace mozilla {
+diff -up firefox-84.0/widget/gtk/nsWaylandDisplay.h.ffvpx firefox-84.0/widget/gtk/nsWaylandDisplay.h
+--- firefox-84.0/widget/gtk/nsWaylandDisplay.h.ffvpx 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/widget/gtk/nsWaylandDisplay.h 2020-12-10 17:05:06.122983961 +0100
+@@ -10,10 +10,6 @@
+
+ #include "DMABufLibWrapper.h"
+
+-#include "base/message_loop.h" // for MessageLoop
+-#include "base/task.h" // for NewRunnableMethod, etc
+-#include "mozilla/StaticMutex.h"
+-
+ #include "mozilla/widget/mozwayland.h"
+ #include "mozilla/widget/gbm.h"
+ #include "mozilla/widget/gtk-primary-selection-client-protocol.h"
diff --git a/firefox-mochitest.patch b/firefox-mochitest.patch
deleted file mode 100644
index c7539be..0000000
--- a/firefox-mochitest.patch
+++ /dev/null
@@ -1,9 +0,0 @@
-diff --git a/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt b/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt
---- a/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt
-+++ b/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt
-@@ -1,4 +1,5 @@
- # This file is the websocketprocess requirements.txt used with python 3.
-+pyrsistent
-
- # needed by txws, and we'd like pip to get it from the local server before setuptools tries pypi
- six
diff --git a/firefox-testing.patch b/firefox-testing.patch
index 04ef0f3..c973db6 100644
--- a/firefox-testing.patch
+++ b/firefox-testing.patch
@@ -1,6 +1,6 @@
-diff -up firefox-83.0/docshell/base/crashtests/crashtests.list.test firefox-83.0/docshell/base/crashtests/crashtests.list
---- firefox-83.0/docshell/base/crashtests/crashtests.list.test 2020-11-12 19:04:36.000000000 +0100
-+++ firefox-83.0/docshell/base/crashtests/crashtests.list 2020-11-19 10:30:26.127468382 +0100
+diff -up firefox-84.0/docshell/base/crashtests/crashtests.list.testing firefox-84.0/docshell/base/crashtests/crashtests.list
+--- firefox-84.0/docshell/base/crashtests/crashtests.list.testing 2020-12-07 23:32:58.000000000 +0100
++++ firefox-84.0/docshell/base/crashtests/crashtests.list 2020-12-10 12:42:49.725237640 +0100
@@ -13,7 +13,6 @@ load 614499-1.html
load 678872-1.html
skip-if(Android) pref(dom.disable_open_during_load,false) load 914521.html # Android bug 1584562
@@ -9,8 +9,9 @@ diff -up firefox-83.0/docshell/base/crashtests/crashtests.list.test firefox-83.0
load 1341657.html
load 1584467.html
load 1614211-1.html
---- firefox-83.0/dom/media/tests/crashtests/crashtests.list.test 2020-11-19 10:42:04.960128784 +0100
-+++ firefox-83.0/dom/media/tests/crashtests/crashtests.list 2020-11-19 10:42:21.508182030 +0100
+diff -up firefox-84.0/dom/media/tests/crashtests/crashtests.list.testing firefox-84.0/dom/media/tests/crashtests/crashtests.list
+--- firefox-84.0/dom/media/tests/crashtests/crashtests.list.testing 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/tests/crashtests/crashtests.list 2020-12-10 12:42:49.725237640 +0100
@@ -24,7 +24,7 @@ asserts-if(Android,0-1) pref(browser.lin
asserts-if(Android,0-1) pref(browser.link.open_newwindow,2) load 1429507_2.html # window.open() in tab doesn't work for crashtest in e10s, this opens a new window instead
asserts-if(Android,0-2) load 1453030.html
@@ -20,41 +21,32 @@ diff -up firefox-83.0/docshell/base/crashtests/crashtests.list.test firefox-83.0
load 1505957.html
load 1509442.html
load 1511130.html
-diff -up firefox-83.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py.old firefox-83.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py
---- firefox-83.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py.old 2020-11-19 11:15:59.150990819 +0100
-+++ firefox-83.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py 2020-11-19 11:17:53.390337862 +0100
-@@ -62,16 +62,9 @@ class TestMarionette(MarionetteTestCase)
+diff -up firefox-84.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py.testing firefox-84.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py
+--- firefox-84.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py.testing 2020-12-10 12:42:49.725237640 +0100
++++ firefox-84.0/testing/marionette/harness/marionette_harness/tests/unit/test_marionette.py 2020-12-10 12:54:22.885925814 +0100
+@@ -69,15 +69,7 @@ class TestMarionette(MarionetteTestCase)
def test_application_update_disabled(self):
# Updates of the application should always be disabled by default
- with self.marionette.using_context("chrome"):
-- update_allowed = self.marionette.execute_script("""
+- update_allowed = self.marionette.execute_script(
+- """
- let aus = Cc['@mozilla.org/updates/update-service;1']
- .getService(Ci.nsIApplicationUpdateService);
- return aus.canCheckForUpdates;
-- """)
+- """
+- )
-
+ update_allowed = False
self.assertFalse(update_allowed)
--
- class TestContext(MarionetteTestCase):
-
- def setUp(self):
-diff -up firefox-83.0/testing/web-platform/tests/tools/manifest/vcs.py.old firefox-83.0/testing/web-platform/tests/tools/manifest/vcs.py
---- firefox-83.0/testing/web-platform/tests/tools/manifest/vcs.py.old 2020-11-19 11:37:03.591683420 +0100
-+++ firefox-83.0/testing/web-platform/tests/tools/manifest/vcs.py 2020-11-19 11:37:18.730715053 +0100
-@@ -9,11 +9,8 @@ from six.moves.collections_abc import Mu
-
- from .utils import git
-
--try:
-- from ..gitignore import gitignore
--except ValueError:
-- # relative import beyond toplevel throws *ValueError*!
-- from gitignore import gitignore # type: ignore
-+# relative import beyond toplevel throws *ValueError*!
-+from gitignore import gitignore # type: ignore
+diff --git a/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt b/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt
+--- a/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt
++++ b/testing/tools/websocketprocessbridge/websocketprocessbridge_requirements_3.txt
+@@ -1,4 +1,5 @@
+ # This file is the websocketprocess requirements.txt used with python 3.
++pyrsistent
- MYPY = False
+ # needed by txws, and we'd like pip to get it from the local server before setuptools tries pypi
+ six
diff --git a/firefox.spec b/firefox.spec
index 071dc6a..eb54712 100644
--- a/firefox.spec
+++ b/firefox.spec
@@ -5,7 +5,7 @@
%global build_with_asan 0
%global run_firefox_tests 1
%global create_debuginfo 1
-%global system_nss 1
+%global system_nss 0
# There are still build problems on s390x, see
# https://koji.fedoraproject.org/koji/taskinfo?taskID=55048351
@@ -120,13 +120,13 @@
Summary: Mozilla Firefox Web browser
Name: firefox
-Version: 83.0
-Release: 15%{?pre_tag}%{?dist}
+Version: 84.0
+Release: 1%{?pre_tag}%{?dist}
URL: https://www.mozilla.org/firefox/
License: MPLv1.1 or GPLv2+ or LGPLv2+
Source0: https://archive.mozilla.org/pub/firefox/releases/%{version}%{?pre_version}/source/firefox-%{version}%{?pre_version}.source.tar.xz
%if %{with langpacks}
-Source1: firefox-langpacks-%{version}%{?pre_version}-20201116.tar.xz
+Source1: firefox-langpacks-%{version}%{?pre_version}-20201210.tar.xz
%endif
Source2: cbindgen-vendor.tar.xz
Source10: firefox-mozconfig
@@ -179,7 +179,6 @@ Patch224: mozilla-1170092.patch
Patch226: rhbz-1354671.patch
Patch227: firefox-locale-debug.patch
Patch228: disable-openh264-download.patch
-Patch229: firefox-mochitest.patch
# Upstream patches
Patch402: mozilla-1196777.patch
@@ -187,11 +186,8 @@ Patch407: mozilla-1667096.patch
Patch408: mozilla-1663844.patch
Patch415: mozilla-1670333.patch
Patch416: mozilla-1673202.patch
-Patch417: mozilla-1673313.patch
Patch418: mozilla-1556931-s390x-hidden-syms.patch
-Patch419: mozilla-1885133.patch
Patch420: mozilla-1678680.patch
-Patch421: mozilla-1672139.patch
# Upstream patches from mozbz#1672944
Patch450: pw1.patch
@@ -201,8 +197,9 @@ Patch453: pw4.patch
Patch454: pw5.patch
Patch455: pw6.patch
+Patch500: ffvpx.patch
+
#VA-API patches
-Patch584: firefox-disable-ffvpx-with-vapi.patch
Patch585: firefox-vaapi-extra-frames.patch
# PGO/LTO patches
@@ -401,7 +398,6 @@ This package contains results of tests executed during build.
%endif
%patch227 -p1 -b .locale-debug
%patch228 -p1 -b .disable-openh264-download
-%patch229 -p1 -b .firefox-mochitest
%patch402 -p1 -b .1196777
%patch407 -p1 -b .1667096
@@ -410,21 +406,19 @@ This package contains results of tests executed during build.
%if 0%{?fedora} > 33 || 0%{?eln}
%patch416 -p1 -b .1673202
%endif
-%patch417 -p1 -b .1673313
%patch418 -p1 -b .1556931-s390x-hidden-syms
-%patch419 -p1 -b .1885133
-%patch450 -p1 -b .pw1
-%patch451 -p1 -b .pw2
-%patch452 -p1 -b .pw3
-%patch453 -p1 -b .pw4
-%patch454 -p1 -b .pw5
+#%patch450 -p1 -b .pw1
+#%patch451 -p1 -b .pw2
+#%patch452 -p1 -b .pw3
+#%patch453 -p1 -b .pw4
+#%patch454 -p1 -b .pw5
%patch455 -p1 -b .pw6
%patch420 -p1 -b .1678680
-%patch421 -p1 -b .1672139
+
+%patch500 -p1 -b .ffvpx
# VA-API fixes
-%patch584 -p1 -b .firefox-disable-ffvpx-with-vapi
%patch585 -p1 -b .firefox-vaapi-extra-frames
# PGO patches
diff --git a/mozilla-1516803.patch b/mozilla-1516803.patch
index f1f37f4..5053e51 100644
--- a/mozilla-1516803.patch
+++ b/mozilla-1516803.patch
@@ -1,16 +1,15 @@
-diff --git a/security/sandbox/linux/moz.build b/security/sandbox/linux/moz.build
---- a/security/sandbox/linux/moz.build
-+++ b/security/sandbox/linux/moz.build
-@@ -99,9 +99,8 @@
+diff -up firefox-84.0/security/sandbox/linux/moz.build.1516803 firefox-84.0/security/sandbox/linux/moz.build
+--- firefox-84.0/security/sandbox/linux/moz.build.1516803 2020-12-10 16:17:55.425139545 +0100
++++ firefox-84.0/security/sandbox/linux/moz.build 2020-12-10 16:29:21.945860841 +0100
+@@ -114,9 +114,8 @@ if CONFIG["CC_TYPE"] in ("clang", "gcc")
# gcc lto likes to put the top level asm in syscall.cc in a different partition
# from the function using it which breaks the build. Work around that by
# forcing there to be only one partition.
--for f in CONFIG['OS_CXXFLAGS']:
-- if f.startswith('-flto') and CONFIG['CC_TYPE'] != 'clang':
-- LDFLAGS += ['--param lto-partitions=1']
+-for f in CONFIG["OS_CXXFLAGS"]:
+- if f.startswith("-flto") and CONFIG["CC_TYPE"] != "clang":
+- LDFLAGS += ["--param lto-partitions=1"]
+if CONFIG['CC_TYPE'] != 'clang':
+ LDFLAGS += ['--param', 'lto-partitions=1']
- DEFINES['NS_NO_XPCOM'] = True
+ DEFINES["NS_NO_XPCOM"] = True
DisableStlWrapping()
-
diff --git a/mozilla-1663844.patch b/mozilla-1663844.patch
index 3e55e80..6c2392f 100644
--- a/mozilla-1663844.patch
+++ b/mozilla-1663844.patch
@@ -1,7 +1,19 @@
-diff --git a/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp b/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp
---- a/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp
-+++ b/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp
-@@ -86,7 +86,7 @@ bool GMPDecoderModule::SupportsMimeType(
+diff -up firefox-84.0/dom/media/gmp/GMPSharedMemManager.h.1663844 firefox-84.0/dom/media/gmp/GMPSharedMemManager.h
+--- firefox-84.0/dom/media/gmp/GMPSharedMemManager.h.1663844 2020-12-07 23:32:59.000000000 +0100
++++ firefox-84.0/dom/media/gmp/GMPSharedMemManager.h 2020-12-10 12:59:39.287832851 +0100
+@@ -27,7 +27,7 @@ class GMPSharedMem {
+ // returned to the parent pool (which is not included). If more than
+ // this are needed, we presume the client has either crashed or hung
+ // (perhaps temporarily).
+- static const uint32_t kGMPBufLimit = 20;
++ static const uint32_t kGMPBufLimit = 40;
+
+ GMPSharedMem() {
+ for (size_t i = 0; i < sizeof(mGmpAllocated) / sizeof(mGmpAllocated[0]);
+diff -up firefox-84.0/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp.1663844 firefox-84.0/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp
+--- firefox-84.0/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp.1663844 2020-12-10 12:59:39.287832851 +0100
++++ firefox-84.0/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp 2020-12-10 14:05:00.833685947 +0100
+@@ -82,7 +82,7 @@ bool GMPDecoderModule::SupportsMimeType(
bool GMPDecoderModule::SupportsMimeType(
const nsACString& aMimeType, DecoderDoctorDiagnostics* aDiagnostics) const {
@@ -9,10 +21,10 @@ diff --git a/dom/media/platforms/agnostic/gmp/GMPDecoderModule.cpp b/dom/media/p
+ return MP4Decoder::IsH264(aMimeType);
}
- } // namespace mozilla
-diff --git a/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp b/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp
---- a/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp
-+++ b/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp
+ /* static */
+diff -up firefox-84.0/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp.1663844 firefox-84.0/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp
+--- firefox-84.0/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp.1663844 2020-12-08 00:35:04.000000000 +0100
++++ firefox-84.0/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp 2020-12-10 12:59:39.287832851 +0100
@@ -67,6 +67,8 @@ void GMPVideoDecoder::Decoded(GMPVideoi4
RefPtr<GMPVideoDecoder> self = this;
if (v) {
@@ -22,15 +34,3 @@ diff --git a/dom/media/platforms/agnostic/gmp/GMPVideoDecoder.cpp b/dom/media/pl
} else {
mDecodedData.Clear();
mDecodePromise.RejectIfExists(
-diff -up firefox-81.0.2/dom/media/gmp/GMPSharedMemManager.h.oldd firefox-81.0.2/dom/media/gmp/GMPSharedMemManager.h
---- firefox-81.0.2/dom/media/gmp/GMPSharedMemManager.h.oldd 2020-10-12 18:19:09.158070701 +0200
-+++ firefox-81.0.2/dom/media/gmp/GMPSharedMemManager.h 2020-10-12 18:19:18.398109540 +0200
-@@ -27,7 +27,7 @@ class GMPSharedMem {
- // returned to the parent pool (which is not included). If more than
- // this are needed, we presume the client has either crashed or hung
- // (perhaps temporarily).
-- static const uint32_t kGMPBufLimit = 20;
-+ static const uint32_t kGMPBufLimit = 40;
-
- GMPSharedMem() {
- for (size_t i = 0; i < sizeof(mGmpAllocated) / sizeof(mGmpAllocated[0]);
diff --git a/mozilla-1667096.patch b/mozilla-1667096.patch
index 5d98fe2..cbe8aea 100644
--- a/mozilla-1667096.patch
+++ b/mozilla-1667096.patch
@@ -1,18 +1,6 @@
-changeset: 551978:40c95986d358
-tag: tip
-parent: 551976:daadcfadb2f8
-user: stransky <stransky@redhat.com>
-date: Thu Sep 24 15:51:06 2020 +0200
-files: media/ffvpx/libavcodec/codec_list.c media/ffvpx/libavcodec/libfdk-aacdec.c media/ffvpx/libavcodec/moz.build toolkit/moz.configure
-description:
-Bug 1667096 Add libfdk-aacdec.c to bundled ffvpx and allow build Firefox with system fdk-aac-free library, r?jya
-
-Differential Revision: https://phabricator.services.mozilla.com/D91278
-
-
-diff --git a/media/ffvpx/libavcodec/codec_list.c b/media/ffvpx/libavcodec/codec_list.c
---- a/media/ffvpx/libavcodec/codec_list.c
-+++ b/media/ffvpx/libavcodec/codec_list.c
+diff -up firefox-84.0/media/ffvpx/libavcodec/codec_list.c.1667096 firefox-84.0/media/ffvpx/libavcodec/codec_list.c
+--- firefox-84.0/media/ffvpx/libavcodec/codec_list.c.1667096 2020-12-07 23:33:03.000000000 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/codec_list.c 2020-12-10 12:57:14.722762321 +0100
@@ -11,4 +11,8 @@ static const AVCodec * const codec_list[
#if CONFIG_MP3_DECODER
&ff_mp3_decoder,
@@ -22,10 +10,9 @@ diff --git a/media/ffvpx/libavcodec/codec_list.c b/media/ffvpx/libavcodec/codec_
+#endif
+
NULL };
-diff --git a/media/ffvpx/libavcodec/libfdk-aacdec.c b/media/ffvpx/libavcodec/libfdk-aacdec.c
-new file mode 100644
---- /dev/null
-+++ b/media/ffvpx/libavcodec/libfdk-aacdec.c
+diff -up firefox-84.0/media/ffvpx/libavcodec/libfdk-aacdec.c.1667096 firefox-84.0/media/ffvpx/libavcodec/libfdk-aacdec.c
+--- firefox-84.0/media/ffvpx/libavcodec/libfdk-aacdec.c.1667096 2020-12-10 12:57:14.722762321 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/libfdk-aacdec.c 2020-12-10 12:57:14.722762321 +0100
@@ -0,0 +1,409 @@
+/*
+ * AAC decoder wrapper
@@ -436,9 +423,9 @@ new file mode 100644
+ FF_CODEC_CAP_INIT_CLEANUP,
+ .wrapper_name = "libfdk",
+};
-diff --git a/media/ffvpx/libavcodec/moz.build b/media/ffvpx/libavcodec/moz.build
---- a/media/ffvpx/libavcodec/moz.build
-+++ b/media/ffvpx/libavcodec/moz.build
+diff -up firefox-84.0/media/ffvpx/libavcodec/moz.build.1667096 firefox-84.0/media/ffvpx/libavcodec/moz.build
+--- firefox-84.0/media/ffvpx/libavcodec/moz.build.1667096 2020-12-08 00:35:05.000000000 +0100
++++ firefox-84.0/media/ffvpx/libavcodec/moz.build 2020-12-10 12:57:14.722762321 +0100
@@ -97,6 +97,12 @@ if not CONFIG['MOZ_FFVPX_AUDIOONLY']:
'vp9recon.c'
]
@@ -452,12 +439,12 @@ diff --git a/media/ffvpx/libavcodec/moz.build b/media/ffvpx/libavcodec/moz.build
if CONFIG['MOZ_LIBAV_FFT']:
SOURCES += [
'avfft.c',
-diff --git a/toolkit/moz.configure b/toolkit/moz.configure
---- a/toolkit/moz.configure
-+++ b/toolkit/moz.configure
-@@ -1592,6 +1592,14 @@ with only_when(compile_environment):
- set_define('MOZ_LIBAV_FFT', depends(when=libav_fft)(lambda: True))
- set_config('LIBAV_FFT_ASFLAGS', libav_fft.flags)
+diff -up firefox-84.0/toolkit/moz.configure.1667096 firefox-84.0/toolkit/moz.configure
+--- firefox-84.0/toolkit/moz.configure.1667096 2020-12-10 12:57:14.723762349 +0100
++++ firefox-84.0/toolkit/moz.configure 2020-12-10 12:58:29.051855203 +0100
+@@ -1868,6 +1868,14 @@ with only_when(compile_environment):
+ set_define("MOZ_LIBAV_FFT", depends(when=libav_fft)(lambda: True))
+ set_config("LIBAV_FFT_ASFLAGS", libav_fft.flags)
+# fdk aac support
+option('--with-system-fdk-aac',
@@ -470,4 +457,3 @@ diff --git a/toolkit/moz.configure b/toolkit/moz.configure
# FFmpeg's ffvpx configuration
# ==============================================================
-
diff --git a/mozilla-1670333.patch b/mozilla-1670333.patch
index a7c7f8a..01dfb25 100644
--- a/mozilla-1670333.patch
+++ b/mozilla-1670333.patch
@@ -1,6 +1,6 @@
-diff -up firefox-82.0/dom/media/mp4/MP4Demuxer.cpp.1670333 firefox-82.0/dom/media/mp4/MP4Demuxer.cpp
---- firefox-82.0/dom/media/mp4/MP4Demuxer.cpp.1670333 2020-10-14 19:20:18.000000000 +0200
-+++ firefox-82.0/dom/media/mp4/MP4Demuxer.cpp 2020-10-19 20:56:38.362039524 +0200
+diff -up firefox-84.0/dom/media/mp4/MP4Demuxer.cpp.1670333 firefox-84.0/dom/media/mp4/MP4Demuxer.cpp
+--- firefox-84.0/dom/media/mp4/MP4Demuxer.cpp.1670333 2020-12-07 23:32:59.000000000 +0100
++++ firefox-84.0/dom/media/mp4/MP4Demuxer.cpp 2020-12-10 14:07:49.095266466 +0100
@@ -31,6 +31,8 @@ mozilla::LogModule* GetDemuxerLog() { re
DDMOZ_LOG(gMediaDemuxerLog, mozilla::LogLevel::Debug, "::%s: " arg, \
__func__, ##__VA_ARGS__)
@@ -23,10 +23,10 @@ diff -up firefox-82.0/dom/media/mp4/MP4Demuxer.cpp.1670333 firefox-82.0/dom/medi
if (sample->mKeyframe != keyframe) {
NS_WARNING(nsPrintfCString("Frame incorrectly marked as %skeyframe "
"@ pts:%" PRId64 " dur:%" PRId64
-diff -up firefox-82.0/dom/media/platforms/PDMFactory.cpp.1670333 firefox-82.0/dom/media/platforms/PDMFactory.cpp
---- firefox-82.0/dom/media/platforms/PDMFactory.cpp.1670333 2020-10-14 19:20:18.000000000 +0200
-+++ firefox-82.0/dom/media/platforms/PDMFactory.cpp 2020-10-19 20:53:14.631214334 +0200
-@@ -49,6 +49,8 @@
+diff -up firefox-84.0/dom/media/platforms/PDMFactory.cpp.1670333 firefox-84.0/dom/media/platforms/PDMFactory.cpp
+--- firefox-84.0/dom/media/platforms/PDMFactory.cpp.1670333 2020-12-10 14:07:49.095266466 +0100
++++ firefox-84.0/dom/media/platforms/PDMFactory.cpp 2020-12-10 15:29:28.969006031 +0100
+@@ -52,6 +52,8 @@
#include <functional>
@@ -34,35 +34,42 @@ diff -up firefox-82.0/dom/media/platforms/PDMFactory.cpp.1670333 firefox-82.0/do
+
namespace mozilla {
- extern already_AddRefed<PlatformDecoderModule> CreateBlankDecoderModule();
-@@ -380,7 +382,8 @@ void PDMFactory::CreatePDMs() {
+ // Set on the main thread, in content processes before any PDMFactory will ever
+@@ -522,9 +524,11 @@ void PDMFactory::CreateContentPDMs() {
+ }
+ #endif
#ifdef MOZ_FFMPEG
- if (StaticPrefs::media_ffmpeg_enabled()) {
- m = FFmpegRuntimeLinker::CreateDecoderModule();
-- mFFmpegFailedToLoad = !StartupPDM(m);
-+ mFFmpegUsed = StartupPDM(m);
-+ mFFmpegFailedToLoad = !mFFmpegUsed;
- } else {
- mFFmpegFailedToLoad = false;
+- if (StaticPrefs::media_ffmpeg_enabled() &&
+- !CreateAndStartupPDM<FFmpegRuntimeLinker>()) {
+- mFailureFlags += DecoderDoctorDiagnostics::Flags::FFmpegFailedToLoad;
++ if (StaticPrefs::media_ffmpeg_enabled()) {
++ mFFmpegUsed = CreateAndStartupPDM<FFmpegRuntimeLinker>();
++ if (!mFFmpegUsed) {
++ mFailureFlags += DecoderDoctorDiagnostics::Flags::FFmpegFailedToLoad;
++ }
}
-@@ -395,7 +398,8 @@ void PDMFactory::CreatePDMs() {
- m = new AgnosticDecoderModule();
- StartupPDM(m);
+ #endif
+ #ifdef MOZ_WIDGET_ANDROID
+@@ -536,8 +540,9 @@ void PDMFactory::CreateContentPDMs() {
+
+ CreateAndStartupPDM<AgnosticDecoderModule>();
-- if (StaticPrefs::media_gmp_decoder_enabled()) {
-+ if (StaticPrefs::media_gmp_decoder_enabled() && !mFFmpegUsed) {
+- if (StaticPrefs::media_gmp_decoder_enabled() &&
++ if (StaticPrefs::media_gmp_decoder_enabled() && !mFFmpegUsed &&
+ !CreateAndStartupPDM<GMPDecoderModule>()) {
+ gUseKeyframeFromContainer = true;
- m = new GMPDecoderModule();
- mGMPPDMFailedToStartup = !StartupPDM(m);
- } else {
-diff -up firefox-82.0/dom/media/platforms/PDMFactory.h.1670333 firefox-82.0/dom/media/platforms/PDMFactory.h
---- firefox-82.0/dom/media/platforms/PDMFactory.h.1670333 2020-10-14 19:20:18.000000000 +0200
-+++ firefox-82.0/dom/media/platforms/PDMFactory.h 2020-10-19 20:53:14.631214334 +0200
-@@ -70,6 +70,7 @@ class PDMFactory final {
+ mFailureFlags += DecoderDoctorDiagnostics::Flags::GMPPDMFailedToStartup;
+ }
+ }
+diff -up firefox-84.0/dom/media/platforms/PDMFactory.h.1670333 firefox-84.0/dom/media/platforms/PDMFactory.h
+--- firefox-84.0/dom/media/platforms/PDMFactory.h.1670333 2020-12-10 14:07:49.096266493 +0100
++++ firefox-84.0/dom/media/platforms/PDMFactory.h 2020-12-10 15:27:42.363034881 +0100
+@@ -116,6 +116,8 @@ class PDMFactory final {
- bool mWMFFailedToLoad = false;
- bool mFFmpegFailedToLoad = false;
-+ bool mFFmpegUsed = false;
- bool mGMPPDMFailedToStartup = false;
+ DecoderDoctorDiagnostics::FlagsSet mFailureFlags;
++ bool mFFmpegUsed = false;
++
friend class RemoteVideoDecoderParent;
+ static void EnsureInit();
+ template <class T>
diff --git a/pgo.patch b/pgo.patch
index c4a6bf4..f6b4953 100644
--- a/pgo.patch
+++ b/pgo.patch
@@ -1,24 +1,7 @@
-diff -up firefox-81.0.1/build/moz.configure/lto-pgo.configure.pgo firefox-81.0.1/build/moz.configure/lto-pgo.configure
---- firefox-81.0.1/build/moz.configure/lto-pgo.configure.pgo 2020-09-30 19:41:10.000000000 +0200
-+++ firefox-81.0.1/build/moz.configure/lto-pgo.configure 2020-10-07 09:16:44.071786956 +0200
-@@ -69,12 +69,14 @@ set_config('PGO_PROFILE_PATH', pgo_profi
- @imports(_from='__builtin__', _import='min')
- def pgo_flags(compiler, profdata, target_is_windows):
- if compiler.type == 'gcc':
-+ #profile_use = '-fprofile-use=$(topobjdir)'
-+ profile_use = '-fprofile-use'
- return namespace(
- gen_cflags=['-fprofile-generate'],
- gen_ldflags=['-fprofile-generate'],
-- use_cflags=['-fprofile-use', '-fprofile-correction',
-+ use_cflags=[profile_use, '-fprofile-correction',
- '-Wcoverage-mismatch'],
-- use_ldflags=['-fprofile-use'],
-+ use_ldflags=[profile_use],
- )
-
- if compiler.type in ('clang-cl', 'clang'):
-@@ -192,13 +194,13 @@ def lto(value, c_compiler, ld64_known_go
+diff -up firefox-84.0/build/moz.configure/lto-pgo.configure.pgo firefox-84.0/build/moz.configure/lto-pgo.configure
+--- firefox-84.0/build/moz.configure/lto-pgo.configure.pgo 2020-12-10 15:55:41.932635998 +0100
++++ firefox-84.0/build/moz.configure/lto-pgo.configure 2020-12-10 16:01:24.674052547 +0100
+@@ -228,13 +228,13 @@ def lto(value, c_compiler, ld64_known_go
cflags.append("-flto")
ldflags.append("-flto")
else:
@@ -26,17 +9,17 @@ diff -up firefox-81.0.1/build/moz.configure/lto-pgo.configure.pgo firefox-81.0.1
- ldflags.append("-flto=thin")
+ cflags.append("-flto")
+ ldflags.append("-flto")
- elif c_compiler.type == 'clang-cl':
- if len(value) and value[0].lower() == 'full':
+ elif c_compiler.type == "clang-cl":
+ if len(value) and value[0].lower() == "full":
cflags.append("-flto")
else:
- cflags.append("-flto=thin")
+ cflags.append("-flto")
# With clang-cl, -flto can only be used with -c or -fuse-ld=lld.
# AC_TRY_LINKs during configure don't have -c, so pass -fuse-ld=lld.
- cflags.append("-fuse-ld=lld");
-@@ -232,7 +234,7 @@ def lto(value, c_compiler, ld64_known_go
- if len(value) and value[0].lower() == 'full':
+ cflags.append("-fuse-ld=lld")
+@@ -268,7 +268,7 @@ def lto(value, c_compiler, ld64_known_go
+ if len(value) and value[0].lower() == "full":
cflags.append("-flto")
else:
- cflags.append("-flto=thin")
@@ -44,9 +27,9 @@ diff -up firefox-81.0.1/build/moz.configure/lto-pgo.configure.pgo firefox-81.0.1
cflags.append("-flifetime-dse=1")
ldflags.append("-flto=%s" % num_cores)
-diff -up firefox-81.0.1/build/pgo/profileserver.py.pgo firefox-81.0.1/build/pgo/profileserver.py
---- firefox-81.0.1/build/pgo/profileserver.py.pgo 2020-09-30 19:41:10.000000000 +0200
-+++ firefox-81.0.1/build/pgo/profileserver.py 2020-10-07 09:16:44.071786956 +0200
+diff -up firefox-84.0/build/pgo/profileserver.py.pgo firefox-84.0/build/pgo/profileserver.py
+--- firefox-84.0/build/pgo/profileserver.py.pgo 2020-12-07 23:32:58.000000000 +0100
++++ firefox-84.0/build/pgo/profileserver.py 2020-12-10 16:05:16.278668657 +0100
@@ -11,7 +11,7 @@ import glob
import subprocess
@@ -56,11 +39,11 @@ diff -up firefox-81.0.1/build/pgo/profileserver.py.pgo firefox-81.0.1/build/pgo/
from mozfile import TemporaryDirectory
from mozhttpd import MozHttpd
from mozprofile import FirefoxProfile, Preferences
-@@ -84,9 +84,22 @@ if __name__ == '__main__':
- port=PORT,
- options='primary,privileged')
+@@ -87,9 +87,22 @@ if __name__ == "__main__":
+ locations = ServerLocations()
+ locations.add_host(host="127.0.0.1", port=PORT, options="primary,privileged")
-- old_profraw_files = glob.glob('*.profraw')
+- old_profraw_files = glob.glob("*.profraw")
- for f in old_profraw_files:
- os.remove(f)
+ using_gcc = False
@@ -82,21 +65,20 @@ diff -up firefox-81.0.1/build/pgo/profileserver.py.pgo firefox-81.0.1/build/pgo/
with TemporaryDirectory() as profilePath:
# TODO: refactor this into mozprofile
-@@ -191,6 +204,11 @@ if __name__ == '__main__':
+@@ -212,6 +225,10 @@ if __name__ == "__main__":
print("Firefox exited successfully, but produced a crashreport")
sys.exit(1)
-+
+ print('Copying profile data....')
+ os.system('pwd');
+ os.system('tar cf profdata.tar.gz `find . -name "*.gcda"`; cd ..; tar xf instrumented/profdata.tar.gz;');
+
- llvm_profdata = env.get('LLVM_PROFDATA')
+ llvm_profdata = env.get("LLVM_PROFDATA")
if llvm_profdata:
- profraw_files = glob.glob('*.profraw')
-diff -up firefox-81.0.1/build/unix/mozconfig.unix.pgo firefox-81.0.1/build/unix/mozconfig.unix
---- firefox-81.0.1/build/unix/mozconfig.unix.pgo 2020-09-30 19:41:10.000000000 +0200
-+++ firefox-81.0.1/build/unix/mozconfig.unix 2020-10-07 09:16:44.071786956 +0200
+ profraw_files = glob.glob("*.profraw")
+diff -up firefox-84.0/build/unix/mozconfig.unix.pgo firefox-84.0/build/unix/mozconfig.unix
+--- firefox-84.0/build/unix/mozconfig.unix.pgo 2020-12-07 23:32:58.000000000 +0100
++++ firefox-84.0/build/unix/mozconfig.unix 2020-12-10 15:55:41.933636031 +0100
@@ -6,6 +6,15 @@ if [ -n "$FORCE_GCC" ]; then
CC="$MOZ_FETCHES_DIR/gcc/bin/gcc"
CXX="$MOZ_FETCHES_DIR/gcc/bin/g++"
@@ -113,32 +95,33 @@ diff -up firefox-81.0.1/build/unix/mozconfig.unix.pgo firefox-81.0.1/build/unix/
# We want to make sure we use binutils and other binaries in the tooltool
# package.
mk_add_options "export PATH=$MOZ_FETCHES_DIR/gcc/bin:$PATH"
-diff -up firefox-81.0.1/extensions/spellcheck/src/moz.build.pgo firefox-81.0.1/extensions/spellcheck/src/moz.build
---- firefox-81.0.1/extensions/spellcheck/src/moz.build.pgo 2020-09-30 19:41:17.000000000 +0200
-+++ firefox-81.0.1/extensions/spellcheck/src/moz.build 2020-10-07 09:16:44.071786956 +0200
+diff -up firefox-84.0/extensions/spellcheck/src/moz.build.pgo firefox-84.0/extensions/spellcheck/src/moz.build
+--- firefox-84.0/extensions/spellcheck/src/moz.build.pgo 2020-12-10 15:55:41.933636031 +0100
++++ firefox-84.0/extensions/spellcheck/src/moz.build 2020-12-10 16:16:05.897011122 +0100
@@ -31,3 +31,5 @@ EXPORTS.mozilla += [
- if CONFIG['CC_TYPE'] in ('clang', 'gcc'):
- CXXFLAGS += ['-Wno-error=shadow']
+ if CONFIG["CC_TYPE"] in ("clang", "gcc"):
+ CXXFLAGS += ["-Wno-error=shadow"]
+
+CXXFLAGS += ['-fno-devirtualize']
-\ No newline at end of file
-diff -up firefox-81.0.1/python/mozbuild/mozbuild/build_commands.py.pgo firefox-81.0.1/python/mozbuild/mozbuild/build_commands.py
---- firefox-81.0.1/python/mozbuild/mozbuild/build_commands.py.pgo 2020-09-30 19:41:46.000000000 +0200
-+++ firefox-81.0.1/python/mozbuild/mozbuild/build_commands.py 2020-10-07 09:16:44.071786956 +0200
-@@ -108,7 +108,8 @@ class Build(MachCommandBase):
+diff -up firefox-84.0/python/mozbuild/mozbuild/build_commands.py.pgo firefox-84.0/python/mozbuild/mozbuild/build_commands.py
+--- firefox-84.0/python/mozbuild/mozbuild/build_commands.py.pgo 2020-12-10 15:55:41.933636031 +0100
++++ firefox-84.0/python/mozbuild/mozbuild/build_commands.py 2020-12-10 16:14:30.017272529 +0100
+@@ -126,9 +126,8 @@ class Build(MachCommandBase):
return status
pgo_env = os.environ.copy()
-- pgo_env['LLVM_PROFDATA'] = instr.config_environment.substs.get('LLVM_PROFDATA')
+- pgo_env["LLVM_PROFDATA"] = instr.config_environment.substs.get(
+- "LLVM_PROFDATA"
+- )
+ if instr.config_environment.substs.get('CC_TYPE') != 'gcc':
-+ pgo_env['LLVM_PROFDATA'] = instr.config_environment.substs.get('LLVM_PROFDATA')
- pgo_env['JARLOG_FILE'] = mozpath.join(orig_topobjdir, 'jarlog/en-US.log')
++ pgo_env["LLVM_PROFDATA"] = instr.config_environment.substs.get("LLVM_PROFDATA")
+ pgo_env["JARLOG_FILE"] = mozpath.join(orig_topobjdir, "jarlog/en-US.log")
pgo_cmd = [
instr.virtualenv_manager.python_path,
-diff -up firefox-81.0.1/toolkit/components/terminator/nsTerminator.cpp.pgo firefox-81.0.1/toolkit/components/terminator/nsTerminator.cpp
---- firefox-81.0.1/toolkit/components/terminator/nsTerminator.cpp.pgo 2020-10-07 09:22:26.698243673 +0200
-+++ firefox-81.0.1/toolkit/components/terminator/nsTerminator.cpp 2020-10-07 09:22:43.026312999 +0200
+diff -up firefox-84.0/toolkit/components/terminator/nsTerminator.cpp.pgo firefox-84.0/toolkit/components/terminator/nsTerminator.cpp
+--- firefox-84.0/toolkit/components/terminator/nsTerminator.cpp.pgo 2020-12-07 23:33:08.000000000 +0100
++++ firefox-84.0/toolkit/components/terminator/nsTerminator.cpp 2020-12-10 15:55:41.933636031 +0100
@@ -418,6 +418,11 @@ void nsTerminator::StartWatchdog() {
}
#endif
diff --git a/print_results b/print_results
index c4c60ef..d0bb535 100755
--- a/print_results
+++ b/print_results
@@ -4,17 +4,7 @@
export TEST_DIR="test_results"
echo "Test results"
-echo "SW"
+echo "Basic compositor"
./print_subtest "test_results" ""
-echo "WR"
+echo "WebRender"
./print_subtest "test_results" "-wr"
-echo "General"
-
-UNPASS=`grep "cppunittests INFO | Passed:" $TEST_DIR/cppunittest | cut -d ' ' -f 5`
-UNFAIL=`grep "cppunittests INFO | Failed:" $TEST_DIR/cppunittest | cut -d ' ' -f 5`
-echo "CPP UNIT: PASSED: $UNPASS FAILED: $UNFAIL"
-
-JSPASS=`grep "TEST-PASS" $TEST_DIR/jsapi | wc -l`
-echo "JSAPI: PASSED: $JSPASS"
-
-echo "JStests: "`tail -n 1 $TEST_DIR/jstests`
diff --git a/print_subtest b/print_subtest
index 2870188..6657757 100755
--- a/print_subtest
+++ b/print_subtest
@@ -14,8 +14,8 @@ MARSKIP=`grep --text "Skipped:" $TEST_DIR/marionette$TEST_FLAVOUR | cut -d ' ' -
MARFAILED=`grep --text "Unexpected results:" $TEST_DIR/marionette$TEST_FLAVOUR | cut -d ' ' -f 3`
echo "Marionette: PASSED: $MARPASS FAILED: $MARSKIP Known issues: $MARFAILED"
-XPCPASS=`grep --text "INFO INFO | Passed:" $TEST_DIR/xpcshell$TEST_FLAVOUR | cut -d ' ' -f 7`
-XPCFAIL=`grep --text "INFO INFO | Failed:" $TEST_DIR/xpcshell$TEST_FLAVOUR | cut -d ' ' -f 7`
+XPCPASS=`grep --text "Expected results:" $TEST_DIR/xpcshell$TEST_FLAVOUR | cut -d ' ' -f 3`
+XPCFAIL=`grep --text "Unexpected results:" $TEST_DIR/xpcshell$TEST_FLAVOUR | cut -d ' ' -f 3`
echo "XPCShell: PASSED: $XPCPASS FAILED: $XPCFAIL"
CRPASS=`grep "REFTEST INFO | Successful:" $TEST_DIR/crashtest$TEST_FLAVOUR | cut -d ' ' -f 5`
diff --git a/run-tests b/run-tests
index dcfe318..f5f5056 100755
--- a/run-tests
+++ b/run-tests
@@ -31,11 +31,5 @@ xvfb-run -s "$X_PARAMS" ./mach marionette-test $TEST_PARAMS >& $TEST_DIR/marione
xvfb-run -s "$X_PARAMS" ./mach reftest $TEST_PARAMS --run-tests-in-parallel >& $TEST_DIR/reftest$TEST_FLAVOUR
./mach xpcshell-test $TEST_PARAMS 2>&1 | cat - > $TEST_DIR/xpcshell$TEST_FLAVOUR
-# Rest
-export TEST_DIR="test"
-objdir/dist/bin/jsapi-tests >& $TEST_DIR/jsapi
-./mach cppunittest >& $TEST_DIR/cppunittest
-./mach jstests >& $TEST_DIR/jstests
-
rm -f objdir/dist/bin/certutil
rm -f objdir/dist/bin/pk12util
diff --git a/sources b/sources
index 32b62ca..049b0ec 100644
--- a/sources
+++ b/sources
@@ -1,4 +1,4 @@
SHA512 (cbindgen-vendor.tar.xz) = 3c925c5523246b7dfbcb4ce563483d5b45315a06dc90f2cf07cddef0c263dd15b410afbbe4d86594de96a308e93be3b27ffec01f5f759a42ecba3cc983b1677f
-SHA512 (firefox-83.0.source.tar.xz) = 4ac49cefed278d1f898907bbedacf81ea4bb4e5784f567d4c0971d9cbc2cf4a2e4472de81a7ded620bc3a516bc972d600b516b7674319cdfc9734c3824a9a2f6
-SHA512 (firefox-langpacks-83.0-20201116.tar.xz) = 0d26660a7f09481e82d8d88ac43917001301d422a94dc48d3913dff92805f100221ca6db15fea05e895221efe5a9d74c07780a671aebc26a69d7a588e1cd423d
SHA512 (mochitest-python.tar.gz) = 7f357cb8bd93d64be5cb75819a8a813d2f8f217ff25f0df8c3190910744132405d45797b3900775a44b554f5c70cf2682809c9e7a686ca131fddcd81e98028d9
+SHA512 (firefox-84.0.source.tar.xz) = 16e3219e28d0807f53c9713e7efaea56cea65bb02959680bed13db4bd9331d9651de5c80c70c928a41b3db9d5471d7b38fa2d88f3e8017565ca7ea79ed0527e9
+SHA512 (firefox-langpacks-84.0-20201210.tar.xz) = 3f836e854425ad9911cc02d5e82f88b904ecbd63357caa677a35bd226d475a161bcbb1647bfce17fed3ccb719dd95340cc7b0b6f7478c87d7c0b45c9493218a5
bgstack15