diff options
Diffstat (limited to 'depcomp')
| -rwxr-xr-x | depcomp | 479 |
1 files changed, 0 insertions, 479 deletions
diff --git a/depcomp b/depcomp deleted file mode 100755 index edb5d38..0000000 --- a/depcomp +++ /dev/null @@ -1,479 +0,0 @@ -#! /bin/sh - -# depcomp - compile a program generating dependencies as side-effects -# Copyright 1999, 2000, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi -# `libtool' can also be set to `yes' or `no'. - -if test -z "$depfile"; then - base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` - dir=`echo "$object" | sed 's,/.*$,/,'` - if test "$dir" = "$object"; then - dir= - fi - # FIXME: should be _deps on DOS. - depfile="$dir.deps/$base" -fi - -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" - if test "$libtool" = yes; then - "$@" -Wc,-M - else - "$@" -M - fi - stat=$? - - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - - if test -f "$tmpdepfile"; then - outname="$stripped.o" - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - tmpdepfile1="$dir.libs/$base.lo.d" - tmpdepfile2="$dir.libs/$base.d" - "$@" -Wc,-MD - else - tmpdepfile1="$dir$base.o.d" - tmpdepfile2="$dir$base.d" - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - if test -f "$tmpdepfile1"; then - tmpdepfile="$tmpdepfile1" - else - tmpdepfile="$tmpdepfile2" - fi - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no - for arg in "$@"; do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - "$@" || exit $? - IFS=" " - for arg - do - case "$arg" in - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 |