New upstream version 3.8.0

1 files changed, 97 insertions, 52 deletions

diff --git a/Makefile.in b/Makefile.in
index 87d8e02..5f1b7ca 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,6 +15,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,11 +69,11 @@ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = krb5-auth-dialog.spec
 CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
 SOURCES =
 DIST_SOURCES =
@@ -67,6 +84,11 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
@@ -79,9 +101,11 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -107,9 +131,11 @@ am__relativize = \
     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
   done; \
   reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
+DIST_ARCHIVES = $(distdir).tar.xz
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ALL_LINGUAS = @ALL_LINGUAS@
@@ -143,19 +169,16 @@ ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
-GCONFTOOL = @GCONFTOOL@
-GCONF_CFLAGS = @GCONF_CFLAGS@
-GCONF_LIBS = @GCONF_LIBS@
-GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
-GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
 GIO_CFLAGS = @GIO_CFLAGS@
 GIO_LIBS = @GIO_LIBS@
+GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
 GMODULE_CFLAGS = @GMODULE_CFLAGS@
 GMODULE_LIBS = @GMODULE_LIBS@
 GMOFILES = @GMOFILES@
 GMSGFMT = @GMSGFMT@
 GREP = @GREP@
+GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
 GTK_CFLAGS = @GTK_CFLAGS@
 GTK_LIBS = @GTK_LIBS@
 HELP_DIR = @HELP_DIR@
@@ -170,6 +193,10 @@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
 INTLTOOL_MERGE = @INTLTOOL_MERGE@
 INTLTOOL_PERL = @INTLTOOL_PERL@
 INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
+INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
+INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
+INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
 KA_PLUGINS_DIR = @KA_PLUGINS_DIR@
 KRB5_CFLAGS = @KRB5_CFLAGS@
 KRB5_CONFIG = @KRB5_CONFIG@
@@ -260,6 +287,7 @@ datarootdir = @datarootdir@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
+gsettingsschemadir = @gsettingsschemadir@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
@@ -269,6 +297,8 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
+intltool__v_merge_options_ = @intltool__v_merge_options_@
+intltool__v_merge_options_0 = @intltool__v_merge_options_0@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -309,7 +339,7 @@ all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -345,10 +375,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -541,13 +569,10 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -580,16 +605,20 @@ distdir: $(DISTFILES)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
+
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 	$(am__remove_distdir)
 
 dist-lzma: distdir
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
-
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 
 dist-tarZ: distdir
@@ -606,8 +635,7 @@ dist-zip: distdir
 	$(am__remove_distdir)
 
 dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
@@ -621,6 +649,8 @@ distcheck: dist
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
@@ -630,7 +660,7 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	chmod -R a-w $(distdir); chmod u+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
@@ -640,6 +670,7 @@ distcheck: dist
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -668,8 +699,16 @@ distcheck: dist
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -700,10 +739,15 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -792,18 +836,19 @@ uninstall-am:
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
 	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+	dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
 
 
 dist-hook: