From 7bf26d686e5c4588c2cca1f78bfb6d5ab4b9333f Mon Sep 17 00:00:00 2001 From: B Stack Date: Wed, 11 Sep 2019 14:59:55 -0400 Subject: plymouth 0.9.4 without systemd --- plymouth/debian/plymouth.README.Debian | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 plymouth/debian/plymouth.README.Debian (limited to 'plymouth/debian/plymouth.README.Debian') diff --git a/plymouth/debian/plymouth.README.Debian b/plymouth/debian/plymouth.README.Debian new file mode 100644 index 0000000..d504b2d --- /dev/null +++ b/plymouth/debian/plymouth.README.Debian @@ -0,0 +1,31 @@ +plymouth for Debian +------------------- + +Plymouth supports both KMS (kernel mode setting) and standard console output. +For standard console support the plymouth-x11 package has to be installed. + +The following steps are required in order to enable the plymouth bootsplash: + + * In case the KMS backend should be used and KMS is not yet enabled on your + system, add the following lines to /etc/initramfs-tools/modules: + + # for KMS with Intel graphic cards + i915 modeset=1 + + # for KMS with NVIDIA graphic cards + nouveau modeset=1 + + # for KMS with AMD (ATI) graphic cards + radeon modeset=1 + + Remember to afterwards rebuild the initrd with 'update-initramfs -u' as + root. + + * Install plymouth and optionally the plymouth-themes packages. + + * Add 'splash' as boot parameter in your bootloader configuration. + + * Optionally switch to a different theme by running + plymouth-set-default-theme (and rebuilding the initrd again). + + -- Daniel Baumann Mon, 06 Sep 2010 12:11:20 +0200 -- cgit