From 826a2e7f8c7786acb3b5d2217f19814f314289ab Mon Sep 17 00:00:00 2001 From: "B. Stack" Date: Wed, 5 Jan 2022 16:21:31 -0500 Subject: add initial lw d/ contents --- .../Add-xptcall-support-for-SH4-processors.patch | 516 +++++++++++++++++++++ 1 file changed, 516 insertions(+) create mode 100644 librewolf/debian/patches/porting/Add-xptcall-support-for-SH4-processors.patch (limited to 'librewolf/debian/patches/porting/Add-xptcall-support-for-SH4-processors.patch') diff --git a/librewolf/debian/patches/porting/Add-xptcall-support-for-SH4-processors.patch b/librewolf/debian/patches/porting/Add-xptcall-support-for-SH4-processors.patch new file mode 100644 index 0000000..d048acc --- /dev/null +++ b/librewolf/debian/patches/porting/Add-xptcall-support-for-SH4-processors.patch @@ -0,0 +1,516 @@ +From: Mike Hommey +Date: Fri, 30 Apr 2010 11:03:50 +0200 +Subject: Add xptcall support for SH4 processors + +Closes: #553593 +https://bugzilla.mozilla.org/show_bug.cgi?id=382214 +--- + xpcom/reflect/xptcall/md/unix/moz.build | 5 + + .../src/md/unix/xptcinvoke_linux_sh.cpp | 203 +++++++++++++ + .../src/md/unix/xptcstubs_linux_sh.cpp | 271 ++++++++++++++++++ + 3 files changed, 479 insertions(+) + create mode 100644 xpcom/reflect/xptcall/src/md/unix/xptcinvoke_linux_sh.cpp + create mode 100644 xpcom/reflect/xptcall/src/md/unix/xptcstubs_linux_sh.cpp + +diff --git a/xpcom/reflect/xptcall/md/unix/moz.build b/xpcom/reflect/xptcall/md/unix/moz.build +index 1779c14..43a10a2 100644 +--- a/xpcom/reflect/xptcall/md/unix/moz.build ++++ b/xpcom/reflect/xptcall/md/unix/moz.build +@@ -262,6 +262,11 @@ if CONFIG["OS_ARCH"] == "Linux": + CXXFLAGS += [ + "-fno-integrated-as", + ] ++ elif CONFIG['OS_TEST'] in ('sh4', 'sh4a'): ++ SOURCES += [ ++ 'xptcinvoke_linux_sh.cpp', ++ 'xptcstubs_linux_sh.cpp', ++ ] + + if CONFIG["OS_ARCH"] == "Linux" and CONFIG["CPU_ARCH"] == "riscv64": + SOURCES += [ +diff --git a/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_linux_sh.cpp b/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_linux_sh.cpp +new file mode 100644 +index 0000000..ca4807d +--- /dev/null ++++ b/xpcom/reflect/xptcall/src/md/unix/xptcinvoke_linux_sh.cpp +@@ -0,0 +1,203 @@ ++/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- ++ * ++ * ***** BEGIN LICENSE BLOCK ***** ++ * Version: MPL 1.1/GPL 2.0/LGPL 2.1 ++ * ++ * The contents of this file are subject to the Mozilla Public License Version ++ * 1.1 (the "License"); you may not use this file except in compliance with ++ * the License. You may obtain a copy of the License at ++ * http://www.mozilla.org/MPL/ ++ * ++ * Software distributed under the License is distributed on an "AS IS" basis, ++ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License ++ * for the specific language governing rights and limitations under the ++ * License. ++ * ++ * The Original Code is mozilla.org code. ++ * ++ * The Initial Developer of the Original Code is ++ * Netscape Communications Corporation. ++ * Portions created by the Initial Developer are Copyright (C) 1998 ++ * the Initial Developer. All Rights Reserved. ++ * ++ * Contributor(s): ++ * - Copyright (C) 2008-2009 STMicroelectronics ++ * ++ * Alternatively, the contents of this file may be used under the terms of ++ * either of the GNU General Public License Version 2 or later (the "GPL"), ++ * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), ++ * in which case the provisions of the GPL or the LGPL are applicable instead ++ * of those above. If you wish to allow use of your version of this file only ++ * under the terms of either the GPL or the LGPL, and not to allow others to ++ * use your version of this file under the terms of the MPL, indicate your ++ * decision by deleting the provisions above and replace them with the notice ++ * and other provisions required by the GPL or the LGPL. If you do not delete ++ * the provisions above, a recipient may use your version of this file under ++ * the terms of any one of the MPL, the GPL or the LGPL. ++ * ++ * Based on the neutroni port, however that assumed that the compiler was pushing params ++ * onto the stack. Change to take this into account. ++ * ++ * ***** END LICENSE BLOCK ***** */ ++ ++#include "xptcprivate.h" ++ ++extern "C" { ++ ++const int c_int_register_params = 4; ++const int c_float_register_params = 8; ++ ++static PRUint32 __attribute__((__used__)) ++copy_to_stack(PRUint32 **that,PRUint32 methodIndex,PRUint32 paramCount, nsXPTCVariant* s,PRUint32* data) ++{ ++ int intCount = 1; // Because of that ++ int floatCount = 0; ++ PRUint32 *intRegParams=data+1 ; ++ float *floatRegParams = (float *)(data+4); ++ ++ /* Push the that register into the right place so it can be restored on exit */ ++ *data= (PRUint32)(that); ++ data+=12; /* 4 integer registers, and 8 floating point registers */ ++ ++ for ( PRUint32 i = 0; i < paramCount; ++i, ++s ) ++ { ++ nsXPTType type = s->IsPtrData() ? nsXPTType::T_I32 : s->type; ++ ++ switch ( type ) { ++ case nsXPTType::T_I64: ++ case nsXPTType::T_U64: ++ // Space to pass in registers? ++ if ( (c_int_register_params - intCount) >= 2 ) { ++ *((PRInt64 *) intRegParams) = s->val.i64; ++ intRegParams += 2; ++ intCount += 2; ++ } ++ else { ++ *((PRInt64*) data) = s->val.i64; ++ data += 2; ++ } ++ break; ++ case nsXPTType::T_FLOAT: ++ // Space to pass in registers? ++ if ( floatCount < c_float_register_params ) { ++ *floatRegParams = s->val.f; ++ ++floatCount; ++ ++floatRegParams; ++ } ++ else { ++ *((float*) data) = s->val.f; ++ ++data; ++ } ++ break; ++ case nsXPTType::T_DOUBLE: ++ // Space to pass in registers? ++ if ( (c_float_register_params - floatCount) >= 2 ) { ++ if ( (floatCount & 1) != 0 ) { ++ ++floatCount; ++ ++floatRegParams; ++ } ++ *(double *)floatRegParams = s->val.d; ++ floatCount += 2; ++ floatRegParams += 2; ++ } ++ else { ++ *((double *) data) = s->val.d; ++ data += 2; ++ } ++ break; ++ default: // 32 (non-float) value ++ PRInt32 value = (PRInt32) (s->IsPtrData() ? s->ptr : s->val.p); ++ // Space to pass in registers? ++ if ( intCount < c_int_register_params ) { ++ *intRegParams = value; ++ ++intRegParams; ++ ++intCount; ++ } ++ else { ++ *data = value; ++ ++data; ++ } ++ break; ++ } ++ } ++ ++ /* Now calculate the return address ++ * Dereference that to get vtable pointer ++ */ ++ return *( (*(that))+(methodIndex) ); ++ ++} ++ ++} ++ ++ /* This was originally done as a C function, but the original code was ++ * relying on how the compiler laid out the stack. Later versions of ++ * gcc do a better job of optimising and never push the parameters on the ++ * stack. So it is simpler to just write the whole thing in assembler anyway ++ */ ++ ++ /* Because the SH processor passes the first few parameters in registers ++ it is a bit tricky setting things up right. To make things easier, ++ all the hard work will be done by copy_to_stack above. We pass to it ++ a chunk of memory, the bottom of which will be copied to registers r4 to r7 ++ and fr4 to fr11 before calling the target function. ++ */ ++ ++/* r4= that, r5=methodIndex,r6=paramCount,r7=params */ ++ ++ __asm__ ( ++ ++ ++ /* Make space for parameters to be passed to the method. Assume worst case ++ 8 bytes per parameter. Also leave space for 4 longs and 8 floats that ++ will be put into registers. The worst case is all int64 parameters ++ and even in this case 8 bytes are passed in registers so we can ++ deduct this from our allocation. ++ */ ++ ".section .text\n" ++ ".balign 4\n" ++ ".global NS_InvokeByIndex_P\n" ++ "NS_InvokeByIndex_P:\n" ++ "mov.l r14, @-r15 \n\t" // Push frame ++ "sts.l pr, @-r15 \n\t" // Push link ++ "mov.l r8, @-r15 \n\t" // Save ++ "mov r15, r14\n\t" // Set frame ++ "mov #3, r1 \n\t" // Assume worse case, all params are 64bit, hence *8 ++ "mov r6, r2\n\t" ++ "shld r1, r2 \n\t" ++ "mov r2, r8 \n\t" // Save stack drop ++ "add #48, r2 \n\t" // Space for 4 longs, 8 floats ++ "sub r2, r15 \n\t" // Drop stack ++ "mov.l 1f, r1 \n\t" // Get address of copy_to_stack_function ++ "jsr @r1 \n\t" ++ "mov.l r15, @-r15 \n\t" // Params will be dumped here ++ "add #4, r15 \n\t" // Pop stack ptr param. r0 contains method address ++ ++ /* Now everything is laid out nicely in the stack. We just have to ++ load values at the top end of the memory area into registers and ++ make the call. We may load more things into registers than needed, ++ but nobody will care about that. ++ */ ++ ++ "mov.l @r15+, r4 \n\t" // that ++ "mov.l @r15+, r5 \n\t" ++ "mov.l @r15+, r6 \n\t" ++ "mov.l @r15+, r7 \n\t" ++ "fmov.s @r15+, fr5 \n\t" ++ "fmov.s @r15+, fr4 \n\t" ++ "fmov.s @r15+, fr7 \n\t" ++ "fmov.s @r15+, fr6 \n\t" ++ "fmov.s @r15+, fr9 \n\t" ++ "fmov.s @r15+, fr8 \n\t" ++ "fmov.s @r15+, fr11 \n\t" ++ "jsr @r0 \n\t" // Invoke method ++ "fmov.s @r15+, fr10 \n\t" ++ "add r8, r15\n\t" // Pop stack back ++ "mov.l @r15+, r8\n\t" // Restore r8 ++ "lds.l @r15+, pr\n\t" ++ "rts\n\t" ++ "mov.l @r15+, r14\n\t" ++ ".balign 4\n\t" ++ "1: .long copy_to_stack \n\t" ++ ); ++ +diff --git a/xpcom/reflect/xptcall/src/md/unix/xptcstubs_linux_sh.cpp b/xpcom/reflect/xptcall/src/md/unix/xptcstubs_linux_sh.cpp +new file mode 100644 +index 0000000..cf9fcea +--- /dev/null ++++ b/xpcom/reflect/xptcall/src/md/unix/xptcstubs_linux_sh.cpp +@@ -0,0 +1,271 @@ ++/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ ++/* ***** BEGIN LICENSE BLOCK ***** ++ * Version: MPL 1.1/GPL 2.0/LGPL 2.1 ++ * ++ * The contents of this file are subject to the Mozilla Public License Version ++ * 1.1 (the "License"); you may not use this file except in compliance with ++ * the License. You may obtain a copy of the License at ++ * http://www.mozilla.org/MPL/ ++ * ++ * Software distributed under the License is distributed on an "AS IS" basis, ++ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License ++ * for the specific language governing rights and limitations under the ++ * License. ++ * ++ * The Original Code is mozilla.org code. ++ * ++ * The Initial Developer of the Original Code is ++ * Netscape Communications Corporation. ++ * Portions created by the Initial Developer are Copyright (C) 1999 ++ * the Initial Developer. All Rights Reserved. ++ * ++ * Contributor(s): ++ * - Copyright (C) 2008-2009 STMicroelectronics ++ * ++ * Alternatively, the contents of this file may be used under the terms of ++ * either of the GNU General Public License Version 2 or later (the "GPL"), ++ * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), ++ * in which case the provisions of the GPL or the LGPL are applicable instead ++ * of those above. If you wish to allow use of your version of this file only ++ * under the terms of either the GPL or the LGPL, and not to allow others to ++ * use your version of this file under the terms of the MPL, indicate your ++ * decision by deleting the provisions above and replace them with the notice ++ * and other provisions required by the GPL or the LGPL. If you do not delete ++ * the provisions above, a recipient may use your version of this file under ++ * the terms of any one of the MPL, the GPL or the LGPL. ++ * ++ * Based on the neutrino code, with some bug fixes and using the C preprocessor ++ * like all the other ports rather than the python script. ++ * ++ * ***** END LICENSE BLOCK ***** */ ++ ++#include "xptcprivate.h" ++#include "xptiprivate.h" ++ ++const int c_int_register_params = 3; ++const int c_float_register_params = 8; ++ ++/* ++ Dispatch function for all stubs. ++ ++ The parameters to the original function are spread between 'data' which ++ is value of the stack pointer when the stub was called, intRegParams which ++ points to an area containing the values of r5, r6 and r7 when the stub was ++ called and floatRegParams which points to an area containing the values ++ of float registers fr4 to fr11 when the stub was called. ++ ++ */ ++extern "C" nsresult ++PrepareAndDispatch(nsXPTCStubBase* self, int methodIndex, PRUint32* data, ++ PRUint32 *intRegParams, float *floatRegParams) ++{ ++#define PARAM_BUFFER_COUNT 16 ++ ++ nsresult result = NS_ERROR_FAILURE; ++ int intCount = 0; ++ int floatCount = 0; ++ nsXPTCMiniVariant paramBuffer[PARAM_BUFFER_COUNT]; ++ nsXPTCMiniVariant* dispatchParams = NULL; ++ const nsXPTMethodInfo* info; ++ PRUint8 paramCount; ++ PRUint8 i; ++ ++ NS_ASSERTION(self,"no self"); ++ ++ self->mEntry->GetMethodInfo(PRUint16(methodIndex), &info); ++ NS_ASSERTION(info,"no interface info"); ++ ++ paramCount = info->GetParamCount(); ++ ++ // setup variant array pointer ++ if(paramCount > PARAM_BUFFER_COUNT) ++ dispatchParams = new nsXPTCMiniVariant[paramCount]; ++ else ++ dispatchParams = paramBuffer; ++ NS_ASSERTION(dispatchParams,"no place for params"); ++ ++ for ( i = 0; i < paramCount; ++i ) { ++ const nsXPTParamInfo& param = info->GetParam(i); ++ nsXPTCMiniVariant* dp = &dispatchParams[i]; ++ nsXPTType type = param.IsOut() ? nsXPTType::T_I32 : param.GetType(); ++ ++ switch ( type ) { ++ case nsXPTType::T_I64: ++ case nsXPTType::T_U64: ++ // Was this passed in a register? ++ if ( (c_int_register_params - intCount) >= 2 ) { ++ dp->val.i64 = *((PRInt64 *) intRegParams); ++ intRegParams += 2; ++ intCount += 2; ++ } ++ else { ++ dp->val.i64 = *((PRInt64*) data); ++ data += 2; ++ } ++ break; ++ case nsXPTType::T_FLOAT: ++ // Was this passed in a register? ++ if ( floatCount < c_float_register_params ) { ++ dp->val.f = *floatRegParams; ++ ++floatCount; ++ ++floatRegParams; ++ } ++ else { ++ dp->val.f = *((float*) data); ++ ++data; ++ } ++ break; ++ case nsXPTType::T_DOUBLE: ++ // Was this passed in a register? ++ if ( (c_float_register_params - floatCount) >= 2 ) { ++ if ( floatCount & 1 != 0 ) { ++ ++floatCount; ++ ++floatRegParams; ++ } ++ dp->val.d = *(double *)floatRegParams; ++ floatCount += 2; ++ floatRegParams += 2; ++ } ++ else { ++ dp->val.d = *((double *) data); ++ data += 2; ++ } ++ break; ++ default: // 32-bit (non-float) value ++ // Was this passed in a register? ++ if ( intCount < c_int_register_params ) { ++ dp->val.i32 = *intRegParams; ++ ++intRegParams; ++ ++intCount; ++ } ++ else { ++ dp->val.i32 = *data; ++ ++data; ++ } ++ break; ++ } ++ } ++ ++ result = self->mOuter->CallMethod((PRUint16)methodIndex, info, dispatchParams); ++ ++ if(dispatchParams != paramBuffer) ++ delete [] dispatchParams; ++ ++ return result; ++} ++ ++ ++__asm__ ( ++ ".text\n" ++ ".little\n" ++ ".section .rodata\n" ++ ++ ".globl SharedStub\n" ++ ".type SharedStub, @function\n" ++ "SharedStub:\n" ++ "mov r15, r1\n" ++ "mov.l r14,@-r15\n" ++ "sts.l pr,@-r15\n" ++ "mov r15, r14\n" ++ ++ /* Some parameters might have been passed in registers, so push them ++ * all onto the stack, PrepareAndDispatch can then work out whats what ++ * given method type information. ++ */ ++ "mov.l r7, @-r15\n" ++ "mov.l r6, @-r15\n" ++ "mov.l r5, @-r15\n" ++ "mov r15, r7\n" /* r7 = PrepareAndDispatch intRegParams param */ ++ ++ "fmov.s fr10, @-r15\n" ++ "fmov.s fr11, @-r15\n" ++ "fmov.s fr8, @-r15\n" ++ "fmov.s fr9, @-r15\n" ++ "fmov.s fr6, @-r15\n" ++ "fmov.s fr7, @-r15\n" ++ "fmov.s fr4, @-r15\n" ++ "fmov.s fr5, @-r15\n" ++ "mov.l r15, @-r15\n" /* PrepareAndDispatch floatRegParams param */ ++ ++ "mov r1, r6\n" /* r6 = PrepareAndDispatch data param */ ++ ++ "mov.l 1f, r1\n" ++ "jsr @r1\n" /* Note, following instruction is executed first*/ ++ "mov r2, r5\n" /* r5 = PrepareAndDispatch methodIndex param */ ++ ++ "mov r14,r15\n" ++ "lds.l @r15+,pr\n" ++ "mov.l @r15+,r14\n" ++ "rts\n" ++ "nop\n" ++ ".align 2\n" ++ "1:\n" ++ ".long PrepareAndDispatch\n" ++ ); ++ ++#define STUB_ENTRY(n) \ ++__asm__( \ ++ ".text\n" \ ++ ".align 1 \n" \ ++ ".if " #n " < 10\n\t" \ ++ ".globl _ZN14nsXPTCStubBase5Stub" #n "Ev\n\t" \ ++ ".type _ZN14nsXPTCStubBase5Stub" #n "Ev,@function\n"\ ++ "_ZN14nsXPTCStubBase5Stub" #n "Ev:\n\t" \ ++ ".elseif " #n " < 100\n\t" \ ++ ".globl _ZN14nsXPTCStubBase6Stub" #n "Ev\n\t" \ ++ ".type _ZN14nsXPTCStubBase6Stub" #n "Ev,@function\n"\ ++ "_ZN14nsXPTCStubBase6Stub" #n "Ev:\n\t" \ ++ ".elseif " #n " < 1000\n\t" \ ++ ".globl _ZN14nsXPTCStubBase7Stub" #n "Ev\n\t" \ ++ ".type _ZN14nsXPTCStubBase7Stub" #n "Ev,@function\n"\ ++ "_ZN14nsXPTCStubBase7Stub" #n "Ev:\n\t" \ ++ ".else\n\t" \ ++ ".err \"stub number " #n " >= 1000 not yet supported\"\n\t" \ ++ ".endif\n\t" \ ++ "mov.l 1f, r1 \n" \ ++ ".if "#n" < 128 \n" \ ++ "jmp @r1 \n" \ ++ " mov #"#n",r2 \n" \ ++ ".elseif "#n" < 256 \n" \ ++ "mov #"#n", r2 \n" \ ++ "jmp @r1 \n" \ ++ " extu.b r2, r2 \n" \ ++ ".else \n" \ ++ "mov #"#n" & 0xff,r2 \n" \ ++ "extu.b r2, r2 \n" \ ++ "mov #"#n">>8, r3 \n" \ ++ "shll8 r3 \n" \ ++ "jmp @r1 \n" \ ++ " or r3, r2 \n" \ ++ ".endif \n" \ ++ ".if "#n" % 20 == 0\n" \ ++ ".align 2\n" \ ++ "1:\n" \ ++ ".long SharedStub\n" \ ++ ".endif\n" \ ++ ); ++ ++ ++/* Due to the fact that the SH4 can only load forward labels, we have ++ * to use sentinel_entry to output the last label. A better solution ++ * would be to introduce a STUB_LAST macro in the defs.in file, but ++ * this will do for now ++ */ ++ ++#define SENTINEL_ENTRY(n) \ ++__asm__( \ ++".if "#n" == 0 \n" \ ++ ".text \n" \ ++ ".align 2\n" \ ++ "1:\n" \ ++ ".long SharedStub\n" \ ++".endif\n" \ ++); \ ++ \ ++nsresult nsXPTCStubBase::Sentinel##n() \ ++{ \ ++ NS_ASSERTION(0,"nsXPTCStubBase::Sentinel called"); \ ++ return NS_ERROR_NOT_IMPLEMENTED; \ ++} ++ ++#include "xptcstubsdef.inc" -- cgit