diff options
Diffstat (limited to 'shared/ossp_uuid/ltmain.sh')
| -rw-r--r-- | shared/ossp_uuid/ltmain.sh | 7874 |
1 files changed, 0 insertions, 7874 deletions
diff --git a/shared/ossp_uuid/ltmain.sh b/shared/ossp_uuid/ltmain.sh deleted file mode 100644 index 174e4923..00000000 --- a/shared/ossp_uuid/ltmain.sh +++ /dev/null @@ -1,7874 +0,0 @@ -# Generated from ltmain.m4sh. - -# ltmain.sh (GNU libtool) 2.2.4 -# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print informational messages (default) -# --version print version information -# -h, --help print short or long help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.2.4 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to <bug-libtool@gnu.org>. - -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=2.2.4 -TIMESTAMP="" -package_revision=1.2976 - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# NLS nuisances: We save the old values to restore during execute mode. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" - fi" -done - -$lt_unset CDPATH - - - - - -: ${CP="cp -f"} -: ${ECHO="echo"} -: ${EGREP="/usr/bin/grep -E"} -: ${FGREP="/usr/bin/grep -F"} -: ${GREP="/usr/bin/grep"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SED="/opt/local/bin/gsed"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" - -dirname="s,/[^/]*$,," -basename="s,^.*/,," - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -# Generated shell functions inserted here. - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -# In the unlikely event $progname began with a '-', it would play havoc with -# func_echo (imagine progname=-n), so we prepend ./ in that case: -func_dirname_and_basename "$progpath" -progname=$func_basename_result -case $progname in - -*) progname=./$progname ;; -esac - -# Make sure we have an absolute path for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=$func_dirname_result - progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" - ;; - *) - save_IFS="$IFS" - IFS=: - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break - done - IFS="$save_IFS" - test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" - -# Standard options: -opt_dry_run=false -opt_help=false -opt_quiet=false -opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname${mode+: }$mode: $*" -} - -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 -} - -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -} - -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default - - -# func_grep expression filename -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_mkdir_p directory-path -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - my_directory_path="$1" - my_dir_list= - - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then - - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" - - # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` - done - my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : - done - IFS="$save_mkdir_p_IFS" - - # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" - fi -} - - -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () -{ - my_template="${TMPDIR-/tmp}/${1-$progname}" - - if test "$opt_dry_run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" - else - - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" - - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi - - $ECHO "X$my_tmpdir" | $Xsed -} - - -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () -{ - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac - - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac -} - - -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "X$1" | $Xsed \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac - - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac - - func_quote_for_expand_result="$my_arg" -} - - -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - - - - -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} - -# func_usage -# Echo short help message to standard output and exit. -func_usage () -{ - $SED -n '/^# Usage:/,/# -h/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - $ECHO - $ECHO "run \`$progname --help | more' for full usage" - exit $? -} - -# func_help -# Echo long help message to standard output and exit. -func_help () -{ - $SED -n '/^# Usage:/,/# Report bugs to/ { - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ - p - }' < "$progpath" - exit $? -} - -# func_missing_arg argname -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - func_error "missing argument for $1" - exit_cmd=exit -} - -exit_cmd=: - - - - - -# Check that we have a working $ECHO. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell, and then maybe $ECHO will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit $EXIT_SUCCESS -fi - -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" - -# Global variables. -# $mode is unset -nonopt= -execute_dlfiles= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 - -opt_dry_run=false -opt_duplicate_deps=false -opt_silent=false -opt_debug=: - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -# func_fatal_configuration arg... -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." -} - - -# func_config -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - -# func_features -# Display the features supported by this script. -func_features () -{ - $ECHO "host: $host" - if test "$build_libtool_libs" = yes; then - $ECHO "enable shared libraries" - else - $ECHO "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - $ECHO "enable static libraries" - else - $ECHO "disable static libraries" - fi - - exit $? -} - -# func_enable_tag tagname -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname="$1" - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - -# Parse options once, thoroughly. This comes as soon as possible in -# the script to make things like `libtool --version' happen quickly. -{ - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac - - # Parse non-mode specific arguments: - while test "$#" -gt 0; do - opt="$1" - shift - - case $opt in - --config) func_config ;; - - --debug) preserve_args="$preserve_args $opt" - func_echo "enabling shell trace mode" - opt_debug='set -x' - $opt_debug - ;; - - -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break - execute_dlfiles="$execute_dlfiles $1" - shift - ;; - - --dry-run | -n) opt_dry_run=: ;; - --features) func_features ;; - --finish) mode="finish" ;; - - --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break - case $1 in - # Valid mode arguments: - clean) ;; - compile) ;; - execute) ;; - finish) ;; - install) ;; - link) ;; - relink) ;; - uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; - esac - - mode="$1" - shift - ;; - - --preserve-dup-deps) - opt_duplicate_deps=: ;; - - --quiet|--silent) preserve_args="$preserve_args $opt" - opt_silent=: - ;; - - --verbose| -v) preserve_args="$preserve_args $opt" - opt_silent=false - ;; - - --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break - preserve_args="$preserve_args $opt $1" - func_enable_tag "$1" # tagname is set here - shift - ;; - - # Separate optargs to long options: - -dlopen=*|--mode=*|--tag=*) - func_opt_split "$opt" - set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} - shift - ;; - - -\?|-h) func_usage ;; - --help) opt_help=: ;; - --version) func_version ;; - - -*) func_fatal_help "unrecognized option \`$opt'" ;; - - *) nonopt="$opt" - break - ;; - esac - done - - - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_duplicate_deps - ;; - esac - - # Having warned about all mis-specified options, bail out if - # anything was wrong. - $exit_cmd $EXIT_FAILURE -} - -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -## ----------- ## -## Main. ## -## ----------- ## - -$opt_help || { - # Sanity checks first: - func_check_version_match - - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - - test -z "$mode" && func_fatal_error "error: you must specify a MODE." - - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$mode' for more information." -} - - -# func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case "$lalib_p_line" in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test "$lalib_p" = yes -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - func_lalib_p "$1" -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_ltwrapper_scriptname_result="" - if func_ltwrapper_executable_p "$1"; then - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - fi -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $opt_debug - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$save_ifs - eval cmd=\"$cmd\" - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. -func_source () -{ - $opt_debug - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $opt_debug - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case "$@ " in - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' - else - write_lobj=none - fi - - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T <<EOF -# $write_libobj - a libtool object file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# Name of the PIC object. -pic_object=$write_lobj - -# Name of the non-PIC object -non_pic_object=$write_oldobj - -EOF - $MV "${write_libobj}T" "${write_libobj}" - } -} - -# func_mode_compile arg... -func_mode_compile () -{ - $opt_debug - # Get the compilation command and the source file. - base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - pie_flag= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; - - target ) - libobj="$arg" - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" - arg_mode=target - continue - ;; - - -pie | -fpie | -fPIE) - pie_flag="$pie_flag $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - func_quote_for_eval "$arg" - lastarg="$lastarg $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" - continue - ;; - - *) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg="$srcfile" - srcfile="$arg" - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - func_quote_for_eval "$lastarg" - base_compile="$base_compile $func_quote_for_eval_result" - done # for arg - - case $arg_mode in - arg) - func_fatal_error "you must specify an argument for -Xcompile" - ;; - target) - func_fatal_error "you must specify a target with \`-o'" - ;; - *) - # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj="$func_basename_result" - } - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx) - func_xform "$libobj" - libobj=$func_xform_result - ;; - esac - - case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; - *) - func_fatal_error "cannot determine name of library object from \`$libobj'" - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - continue - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - removelist="$removelist $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - removelist="$removelist $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test "$pic_mode" != no; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - command="$command -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { -test "$mode" = compile && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode \`$mode'" - ;; - esac - - $ECHO - $ECHO "Try \`$progname --help' for more information about other modes." - - exit $? -} - - # Now that we've collected a possible --mode arg, show help if necessary - $opt_help && func_mode_help - - -# func_mode_execute arg... -func_mode_execute () -{ - $opt_debug - # The first argument is the command name. - cmd="$nonopt" - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - test -f "$file" \ - || func_fatal_help "\`$file' is not a file" - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir="$func_dirname_result" - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir="$func_dirname_result" - ;; - - *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file="$progdir/$program" - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_quote_for_eval "$file" - args="$args $func_quote_for_eval_result" - done - - if test "X$opt_dry_run" = Xfalse; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - $ECHO "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - fi -} - -test "$mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS - - $ECHO "X----------------------------------------------------------------------" | $Xsed - $ECHO "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - $ECHO - $ECHO "If you ever happen to want to link against installed libraries" - $ECHO "in a given directory, LIBDIR, you must either use libtool, and" - $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" - $ECHO "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" - $ECHO " during execution" - fi - if test -n "$runpath_var"; then - $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" - $ECHO " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $ECHO - - $ECHO "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" - $ECHO "pages." - ;; - *) - $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - $ECHO "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS -} - -test "$mode" = finish && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $opt_debug - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $ECHO "X$nonopt" | $GREP shtool >/dev/null; then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - install_prog="$install_prog$func_quote_for_eval_result" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - install_prog="$install_prog $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "\`$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir="$func_dirname_result" - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking \`$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname="$1" - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme="$stripme" - case $host_os in - cygwin* | mingw* | pw32*) - case $realname in - *.dll.a) - tstripme="" - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - $opt_dry_run || { - if test "$finalize" = yes; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_silent || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink \`$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file="$outputname" - else - func_warning "cannot relink \`$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name="$func_basename_result" - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test "$mode" = install && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_verbose "extracting global C symbols from \`$progfile'" - $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $opt_dry_run || { - $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin | *mingw* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" - func_basename "$dlprefile" - name="$func_basename_result" - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 </dev/null >/dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - $ECHO >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -" - case $host in - *cygwin* | *mingw* ) - $ECHO >> "$output_objdir/$my_dlsyms" "\ -/* DATA imports from DLLs on WIN32 con't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs. */" - lt_dlsym_const= ;; - *osf5*) - echo >> "$output_objdir/$my_dlsyms" "\ -/* This system does not cope well with relocations in const data */" - lt_dlsym_const= ;; - *) - lt_dlsym_const=const ;; - esac - - $ECHO >> "$output_objdir/$my_dlsyms" "\ -extern $lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; -$lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - $ECHO >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) symtab_cflags="$symtab_cflags $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' - - # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" - case $host in - *cygwin* | *mingw* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () -{ - $opt_debug - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | - $SED -n -e ' - 1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $opt_debug - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib="$func_basename_result" - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" -} - - - -# func_emit_wrapper arg -# -# emit a libtool wrapper script on stdout -# don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variable -# set therein. -# -# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the '.lib' directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=no - if test -n "$1" ; then - func_emit_wrapper_arg1=$1 - fi - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - ECHO=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$ECHO works! - : - else - # Restart under the correct shell, and then maybe \$ECHO will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $ECHO "\ - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $ECHO "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} -# end: func_emit_wrapper - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat <<EOF - -/* $cwrappersource - temporary wrapper executable for $objdir/$outputname - Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION - - The $output program cannot be directly executed until all the libtool - libraries that it depends on are installed. - - This wrapper executable should never be moved out of the build directory. - If it is, it will not operate correctly. - - Currently, it simply execs the wrapper *script* "$SHELL $output", - but could eventually absorb all of the scripts functionality and - exec $objdir/$outputname directly. -*/ -EOF - cat <<"EOF" -#include <stdio.h> -#include <stdlib.h> -#ifdef _MSC_VER -# include <direct.h> -# include <process.h> -# include <io.h> -# define setmode _setmode -#else -# include <unistd.h> -# include <stdint.h> -# ifdef __CYGWIN__ -# include <io.h> -# endif -#endif -#include <malloc.h> -#include <stdarg.h> -#include <assert.h> -#include <string.h> -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <sys/stat.h> - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -#ifdef _MSC_VER -# define S_IXUSR _S_IEXEC -# define stat _stat -# ifndef _INTPTR_T_DEFINED -# define intptr_t int -# endif -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifdef __CYGWIN__ -# define FOPEN_WB "wb" -#endif - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -#undef LTWRAPPER_DEBUGPRINTF -#if defined DEBUGWRAPPER -# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args -static void -ltwrapper_debugprintf (const char *fmt, ...) -{ - va_list args; - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); -} -#else -# define LTWRAPPER_DEBUGPRINTF(args) -#endif - -const char *program_name = NULL; - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_fatal (const char *message, ...); - -static const char *script_text = -EOF - - func_emit_wrapper yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - - cat <<EOF -const char * MAGIC_EXE = "$magic_exe"; - -int -main (int argc, char *argv[]) -{ - char **newargz; - char *tmp_pathspec; - char *actual_cwrapper_path; - char *shwrapper_name; - intptr_t rval = 127; - FILE *shwrapper; - - const char *dumpscript_opt = "--lt-dump-script"; - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); - - /* very simple arg parsing; don't want to rely on getopt */ - for (i = 1; i < argc; i++) - { - if (strcmp (argv[i], dumpscript_opt) == 0) - { -EOF - case "$host" in - *mingw* | *cygwin* ) - # make stdout use "unix" line endings - echo " setmode(1,_O_BINARY);" - ;; - esac - - cat <<EOF - printf ("%s", script_text); - return 0; - } - } - - newargz = XMALLOC (char *, argc + 2); -EOF - - if test -n "$TARGETSHELL" ; then - # no path translation at all - lt_newargv0=$TARGETSHELL - else - case "$host" in - *mingw* ) - # awkward: cmd appends spaces to result - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - lt_newargv0=`( cmd //c echo $SHELL | $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo $SHELL` - case $lt_newargv0 in - *.exe | *.EXE) ;; - *) lt_newargv0=$lt_newargv0.exe ;; - esac - ;; - * ) lt_newargv0=$SHELL ;; - esac - fi - - cat <<EOF - newargz[0] = (char *) xstrdup ("$lt_newargv0"); -EOF - - cat <<"EOF" - tmp_pathspec = find_executable (argv[0]); - if (tmp_pathspec == NULL) - lt_fatal ("Couldn't find %s", argv[0]); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", - tmp_pathspec)); - - actual_cwrapper_path = chase_symlinks (tmp_pathspec); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", - actual_cwrapper_path)); - XFREE (tmp_pathspec); - - shwrapper_name = (char *) xstrdup (base_name (actual_cwrapper_path)); - strendzap (actual_cwrapper_path, shwrapper_name); - - /* shwrapper_name transforms */ - strendzap (shwrapper_name, ".exe"); - tmp_pathspec = XMALLOC (char, (strlen (shwrapper_name) + - strlen ("_ltshwrapperTMP") + 1)); - strcpy (tmp_pathspec, shwrapper_name); - strcat (tmp_pathspec, "_ltshwrapperTMP"); - XFREE (shwrapper_name); - shwrapper_name = tmp_pathspec; - tmp_pathspec = 0; - LTWRAPPER_DEBUGPRINTF (("(main) libtool shell wrapper name: %s\n", - shwrapper_name)); -EOF - - cat <<EOF - newargz[1] = - XMALLOC (char, (strlen (actual_cwrapper_path) + - strlen ("$objdir") + 1 + strlen (shwrapper_name) + 1)); - strcpy (newargz[1], actual_cwrapper_path); - strcat (newargz[1], "$objdir"); - strcat (newargz[1], "/"); - strcat (newargz[1], shwrapper_name); -EOF - - - case $host_os in - mingw*) - cat <<"EOF" - { - char* p; - while ((p = strchr (newargz[1], '\\')) != NULL) - { - *p = '/'; - } - } -EOF - ;; - esac - - cat <<"EOF" - XFREE (shwrapper_name); - XFREE (actual_cwrapper_path); - - /* always write in binary mode */ - if ((shwrapper = fopen (newargz[1], FOPEN_WB)) == 0) - { - lt_fatal ("Could not open %s for writing", newargz[1]); - } - fprintf (shwrapper, "%s", script_text); - fclose (shwrapper); - - make_executable (newargz[1]); - - for (i = 1; i < argc; i++) - newargz[i + 1] = xstrdup (argv[i]); - newargz[argc + 1] = NULL; - - for (i = 0; i < argc + 1; i++) - { - LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, newargz[i])); - } - -EOF - - case $host_os in - mingw*) - cat <<EOF - /* execv doesn't actually work on mingw as expected on unix */ - rval = _spawnv (_P_WAIT, "$lt_newargv0", (const char * const *) newargz); - if (rval == -1) - { - /* failed to start process */ - LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"$lt_newargv0\": errno = %d\n", errno)); - return 127; - } - return rval; -} -EOF - ;; - *) - cat <<EOF - execv ("$lt_newargv0", newargz); - return rval; /* =127, but avoids unused variable warning */ -} -EOF - ;; - esac - - cat <<"EOF" - -void * -xmalloc (size_t num) -{ - void *p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), - string) : NULL; -} - -const char * -base_name (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char) name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} - -int -check_executable (const char *path) -{ - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if ((stat (path, &st) >= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char *concat_name; - - LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", - wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", - tmp_pathspec)); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - char *errstr = strerror (errno); - lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal ("Could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp (str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF -} -# end: func_emit_cwrapperexe_src - -# func_mode_link arg... -func_mode_link () -{ - $opt_debug - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module="${wl}-single_module" - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) deplibs="$deplibs $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file \`$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - weak) - weak_libs="$weak_libs $arg" - prev= - continue - ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname '-L' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test "X$arg" = "X-lc" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot) - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; - esac - continue - ;; - - -multi_module) - single_module="${wl}-multi_module" - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" - linker_flags="$linker_flags $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - func_append compile_command " $arg" - func_append finalize_command " $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_duplicate_deps ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs="$tmp_deplibs" - fi - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - case $lib in - *.la) func_source "$lib" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` - case " $weak_libs " in - *" $deplib_base "*) ;; - *) deplibs="$deplibs $deplib" ;; - esac - done - done - libs="$dlprefiles" - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - compiler_flags="$compiler_flags $deplib" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test "$linkmode" = lib; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - *) - func_warning "\`-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - func_stripname '-R' '' "$deplib" - dir=$func_stripname_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $ECHO - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because the file extensions .$libext of this argument makes me believe" - $ECHO "*** that it is just a static archive that I should not use here." - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - ;; - esac - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" - fi - ;; - esac - func_basename "$lib" - laname="$func_basename_result" - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in - *"$absdir:"*) ;; - *) temp_rpath="$temp_rpath$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then - use_static_libs=no - fi - if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw*) - # No point in relinking DLLs because paths are not encoded - notinst_deplibs="$notinst_deplibs $lib" - need_relink=no - ;; - *) - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" - break - fi - done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - $ECHO - if test "$linkmode" = prog; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname="$1" - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw*) - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - func_basename "$soroot" - soname="$func_basename_result" - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from \`$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $ECHO - $ECHO "*** And there doesn't seem to be a static archive available" - $ECHO "*** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - elif test -n "$old_library"; then - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - $ECHO - $ECHO "*** Warning: This system can not link to static lib archive $lib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - $ECHO "*** But as you try to build a module library, libtool will still create " - $ECHO "*** a static module, that should work as long as the dlopening application" - $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - func_dirname "$deplib" "" "." - dir="$func_dirname_result" - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" - path= - fi - fi - ;; - *) - path="-L$absdir/$objdir" - ;; - esac - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" - - path="-L$absdir" - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "\`-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" - - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" - - install_libdir="$1" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - shift - IFS="$save_ifs" - - test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major="$1" - number_minor="$2" - number_revision="$3" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_minor" - lt_irix_increment=no - ;; - esac - ;; - no) - current="$1" - revision="$2" - age="$3" - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current" - ;; - - irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - qnx) - major=".$current" - versuffix=".$current" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - - *) - func_fatal_configuration "unknown library version type \`$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - fi - - func_generate_dlsyms "$libname" "$libname" "yes" - libobjs="$libobjs $symfileobj" - test "X$libobjs" = "X " && libobjs= - - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` - # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` - # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c <<EOF - int main() { return 0; } -EOF - $opt_dry_run || $RM conftest - if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then - ldd_output=`ldd conftest` - for i in $deplibs; do - case $i in - -l*) - func_stripname -l '' "$i" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) - newdeplibs="$newdeplibs $i" - i="" - ;; - esac - fi - if test -n "$i" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` - set dummy $deplib_matches; shift - deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - $ECHO - $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which I believe you do not have" - $ECHO "*** because a test_compile did reveal that the linker did not use it for" - $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." - fi - fi - ;; - *) - newdeplibs="$newdeplibs $i" - ;; - esac - done - else - # Error occurred in the first compile. Let's try to salvage - # the situation: Compile a separate program for each library. - for i in $deplibs; do - case $i in - -l*) - func_stripname -l '' "$i" - name=$func_stripname_result - $opt_dry_run || $RM conftest - if $LTCC $LTCFLAGS -o conftest conftest.c $i; then - ldd_output=`ldd conftest` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) - newdeplibs="$newdeplibs $i" - i="" - ;; - esac - fi - if test -n "$i" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` - set dummy $deplib_matches; shift - deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - $ECHO - $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because a test_compile did reveal that the linker did not use this one" - $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." - fi - fi - else - droppeddeps=yes - $ECHO - $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - $ECHO "*** make it link in! You will probably need to install it or some" - $ECHO "*** library that it depends on before this library will be fully" - $ECHO "*** functional. Installing it before continuing would be even better." - fi - ;; - *) - newdeplibs="$newdeplibs $i" - ;; - esac - done - fi - ;; - file_magic*) - set dummy $deplibs_check_method; shift - file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ - -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` - done - fi - if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | - $GREP . >/dev/null; then - $ECHO - if test "X$deplibs_check_method" = "Xnone"; then - $ECHO "*** Warning: inter-library dependencies are not supported in this platform." - else - $ECHO "*** Warning: inter-library dependencies are not known to be supported." - fi - $ECHO "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - $ECHO - $ECHO "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - $ECHO "*** a static module, that should work as long as the dlopening" - $ECHO "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - $ECHO "*** The inter-library dependencies that have been dropped here will be" - $ECHO "*** automatically added whenever a program is linked with this library" - $ECHO "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - $ECHO - $ECHO "*** Since this library must not contain undefined symbols," - $ECHO "*** because either the platform does not support them or" - $ECHO "*** it was explicitly requested with -no-undefined," - $ECHO "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - deplibs="$new_libs" - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname="$1" - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - linknames= - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" - delfiles="$delfiles $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols="$export_symbols" - export_symbols= - always_export_symbols=yes - fi - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - func_len " $cmd" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test "X$skipped_export" != "X:" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - output_la=`$ECHO "X$output" | $Xsed -e "$basename"` - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript - func_verbose "creating GNU ld script: $output" - $ECHO 'INPUT (' > $output - for obj in $save_libobjs - do - $ECHO "$obj" >> $output - done - $ECHO ')' >> $output - delfiles="$delfiles $output" - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test "$compiler_needs_object" = yes; then - firstobj="$1 " - shift - fi - for obj - do - $ECHO "$obj" >> $output - done - delfiles="$delfiles $output" - output=$firstobj\"$file_list_spec$output\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test "X$objlist" = X || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi - delfiles="$delfiles $output" - - else - output= - fi - - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - fi - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - if ${skipped_export-false}; then - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - fi - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "\`-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` - else - gentop="$output_objdir/${obj}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "\`-release' is ignored for programs" - - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - compile_deplibs="$new_libs" - - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=yes - case $host in - *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - esac - if test "$wrappers_required" = no; then - # Replace the output file specification. - compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' - fi - - exit $exit_status - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - exit $EXIT_SUCCESS - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $ECHO for shipping. - if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - oldobjs="$oldobjs $symfileobj" - fi - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $ECHO "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase="$func_basename_result" - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done - fi - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlfiles="$newdlfiles $libdir/$name" - ;; - *) newdlfiles="$newdlfiles $lib" ;; - esac - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlprefiles="$newdlprefiles $libdir/$name" - ;; - esac - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" - done - dlprefiles="$newdlprefiles" - fi - $RM $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that can not go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -{ test "$mode" = link || test "$mode" = relink; } && - func_mode_link ${1+"$@"} - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $opt_debug - RM="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) RM="$RM $arg"; rmforce=yes ;; - -*) RM="$RM $arg" ;; - *) files="$files $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - origobjdir="$objdir" - for file in $files; do - func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - objdir="$origobjdir" - else - objdir="$dir/$origobjdir" - fi - func_basename "$file" - name="$func_basename_result" - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - - case "$mode" in - clean) - case " $library_names " in - # " " in the beginning catches empty $dlname - *" $dlname "*) ;; - *) rmfiles="$rmfiles $objdir/$dlname" ;; - esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi - ;; - - *) - if test "$mode" = clean ; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - rmfiles="$rmfiles $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - rmfiles="$rmfiles $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - objdir="$origobjdir" - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -{ test "$mode" = uninstall || test "$mode" = clean; } && - func_mode_uninstall ${1+"$@"} - -test -z "$mode" && { - help="$generic_help" - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: -# vi:sw=2 - |