From 2fbc41109e1aa07a81aef6ff6f61cb023cb28b9e Mon Sep 17 00:00:00 2001 From: Cédric Bonhomme Date: Fri, 20 Feb 2015 07:37:19 +0100 Subject: SPhinx documentation. --- documentation/Makefile | 153 ++++++++++++++++++++++++++ documentation/conf.py | 242 +++++++++++++++++++++++++++++++++++++++++ documentation/deployment.rst | 20 ++-- documentation/index.rst | 34 ++++++ documentation/make.bat | 190 ++++++++++++++++++++++++++++++++ documentation/migrations.rst | 4 +- documentation/web-services.rst | 20 ++-- 7 files changed, 641 insertions(+), 22 deletions(-) create mode 100644 documentation/Makefile create mode 100644 documentation/conf.py create mode 100644 documentation/index.rst create mode 100644 documentation/make.bat (limited to 'documentation') diff --git a/documentation/Makefile b/documentation/Makefile new file mode 100644 index 00000000..18130862 --- /dev/null +++ b/documentation/Makefile @@ -0,0 +1,153 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + +clean: + -rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/pyAggr3g470r.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/pyAggr3g470r.qhc" + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/pyAggr3g470r" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/pyAggr3g470r" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." diff --git a/documentation/conf.py b/documentation/conf.py new file mode 100644 index 00000000..b148de9d --- /dev/null +++ b/documentation/conf.py @@ -0,0 +1,242 @@ +# -*- coding: utf-8 -*- +# +# pyAggr3g470r documentation build configuration file, created by +# sphinx-quickstart on Fri Feb 20 07:23:42 2015. +# +# This file is execfile()d with the current directory set to its containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys, os + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +#sys.path.insert(0, os.path.abspath('.')) + +# -- General configuration ----------------------------------------------------- + +# If your documentation needs a minimal Sphinx version, state it here. +#needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be extensions +# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. +extensions = [] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'pyAggr3g470r' +copyright = u'2015, Cédric Bonhomme' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '6.0' +# The full version, including alpha/beta/rc tags. +release = '6.0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +#language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + + +# -- Options for HTML output --------------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +html_theme = 'default' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Output file base name for HTML help builder. +htmlhelp_basename = 'pyAggr3g470rdoc' + + +# -- Options for LaTeX output -------------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, author, documentclass [howto/manual]). +latex_documents = [ + ('index', 'pyAggr3g470r.tex', u'pyAggr3g470r Documentation', + u'Cédric Bonhomme', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output -------------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + ('index', 'pyaggr3g470r', u'pyAggr3g470r Documentation', + [u'Cédric Bonhomme'], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------------ + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + ('index', 'pyAggr3g470r', u'pyAggr3g470r Documentation', + u'Cédric Bonhomme', 'pyAggr3g470r', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' diff --git a/documentation/deployment.rst b/documentation/deployment.rst index 95f3bc23..d0639c45 100644 --- a/documentation/deployment.rst +++ b/documentation/deployment.rst @@ -10,7 +10,7 @@ Deploying the application with Vagrant Installation of VirtualBox and Vagrant -.. code:: bash +.. code-block:: bash $ sudo apt-get install virtualbox $ wget https://dl.bintray.com/mitchellh/vagrant/vagrant_1.6.5_x86_64.deb @@ -18,7 +18,7 @@ Installation of VirtualBox and Vagrant Deployment of pyAggr3g470r -.. code:: bash +.. code-block:: bash $ git clone https://bitbucket.org/cedricbonhomme/pyaggr3g470r.git $ cd pyaggr3g470r/vagrant/ @@ -34,7 +34,7 @@ An instance of pyAggr3g470r is running `here @@ -77,7 +77,7 @@ And some other optional environment variables, as previously presented. Deploying the application on a traditional server ------------------------------------------------- -.. code:: bash +.. code-block:: bash $ sudo apt-get install python libpq-dev python-dev python-pip build-essential git $ sudo apt-get install libxml2-dev libxslt1-dev # for lxml @@ -89,7 +89,7 @@ Deploying the application on a traditional server If you want to use PostgreSQL ''''''''''''''''''''''''''''' -.. code:: bash +.. code-block:: bash $ sudo apt-get install postgresql postgresql-server-dev-9.3 postgresql-client $ echo "127.0.0.1:5432:aggregator:pgsqluser:pgsqlpwd" > ~/.pgpass @@ -101,7 +101,7 @@ If you want to use PostgreSQL Edit the configuration file with the line: -.. code:: cfg +.. code-block:: cfg [database] uri = postgres://pgsqluser:pgsqlpwd@127.0.0.1:5433/aggregator @@ -111,7 +111,7 @@ If you want to use SQLite Just edit the configuration file with the line: -.. code:: cfg +.. code-block:: cfg [database] uri = sqlite+pysqlite:///pyAggr3g470r.db @@ -119,7 +119,7 @@ Just edit the configuration file with the line: Finally: -.. code:: bash +.. code-block:: bash $ python db_create.py $ python runserver.py @@ -142,7 +142,7 @@ Automatic updates You can fetch new articles with `cron `_ and the script *fetch.py*. For example if you want to check for updates every 30 minutes, add this line to your cron rules (*crontab -e*): -.. code:: bash +.. code-block:: bash */30 * * * * cd ~/.pyaggr3g470r/ ; python fetch.py firstname.lastname@mail.com diff --git a/documentation/index.rst b/documentation/index.rst new file mode 100644 index 00000000..d01dc583 --- /dev/null +++ b/documentation/index.rst @@ -0,0 +1,34 @@ +.. pyAggr3g470r documentation master file, created by + sphinx-quickstart on Fri Feb 20 07:23:42 2015. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to pyAggr3g470r's documentation! +======================================== + + +Deployment and configuration +============================ + +.. toctree:: + :maxdepth: 2 + + deployment + +Web services +============ + +.. toctree:: + :maxdepth: 2 + + web-services + +Migrations +========== + +.. toctree:: + :maxdepth: 2 + + migrations + + diff --git a/documentation/make.bat b/documentation/make.bat new file mode 100644 index 00000000..fa0c6a48 --- /dev/null +++ b/documentation/make.bat @@ -0,0 +1,190 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=_build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . +set I18NSPHINXOPTS=%SPHINXOPTS% . +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\pyAggr3g470r.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\pyAggr3g470r.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +:end diff --git a/documentation/migrations.rst b/documentation/migrations.rst index f29c7a19..69f6c974 100644 --- a/documentation/migrations.rst +++ b/documentation/migrations.rst @@ -12,13 +12,13 @@ are used to ease remote migrations. Local migrations ---------------- -.. code:: bash +.. code-block:: bash $ python manage.py db upgrade Remote migrations ----------------- -.. code:: bash +.. code-block:: bash $ heroku run python manage.py db upgrade diff --git a/documentation/web-services.rst b/documentation/web-services.rst index 9c616642..2d724569 100644 --- a/documentation/web-services.rst +++ b/documentation/web-services.rst @@ -4,11 +4,11 @@ Web service Articles -------- -.. code:: python +.. code-block:: python >>> import requests, json >>> r = requests.get("https://pyaggr3g470r.herokuapp.com/api/v1.0/articles", auth=("your-email", "your-password")) - >>> r.status_code + >>> r.status_code-block 200 >>> rjson = json.loads(r.text) >>> rjson["result"][0]["title"] @@ -18,7 +18,7 @@ Articles Possible parameters: -.. code:: bash +.. code-block:: bash $ curl --user your-email:your-password "https://pyaggr3g470r.herokuapp.com/api/v1.0/articles?filter_=unread&feed=24" $ curl --user your-email:your-password "https://pyaggr3g470r.herokuapp.com/api/v1.0/articles?filter_=read&feed=24&limit=20" @@ -26,13 +26,13 @@ Possible parameters: Get an article: -.. code:: bash +.. code-block:: bash $ curl --user your-email:your-password "https://pyaggr3g470r.herokuapp.com/api/v1.0/articles/84566" Add an article: -.. code:: python +.. code-block:: python >>> import requests, json >>> headers = {'Content-type': 'application/json', 'Accept': 'application/json'} @@ -48,7 +48,7 @@ Add an article: Update an article: -.. code:: python +.. code-block:: python >>> payload = {"like":True, "readed":False} >>> r = requests.put("https://pyaggr3g470r.herokuapp.com/api/v1.0/articles/65", headers=headers, auth=("your-email", "your-password"), data=json.dumps(payload)) @@ -59,7 +59,7 @@ Update an article: Delete an article: -.. code:: python +.. code-block:: python >>> r = requests.delete("https://pyaggr3g470r.herokuapp.com/api/v1.0/articles/84574", auth=("your-email", "your-password")) >>> print r.status_code @@ -81,20 +81,20 @@ Feeds Add a feed: -.. code:: python +.. code-block:: python >>> payload = {'link': 'http://blog.cedricbonhomme.org/feed'} >>> r = requests.post("https://pyaggr3g470r.herokuapp.com/api/v1.0/feeds", headers=headers, auth=("your-email", "your-password"), data=json.dumps(payload)) Update a feed: -.. code:: python +.. code-block:: python >>> payload = {"title":"Feed new title", "description":"New description"} >>> r = requests.put("https://pyaggr3g470r.herokuapp.com/api/v1.0/feeds/42", headers=headers, auth=("your-email", "your-password"), data=json.dumps(payload)) Delete a feed: -.. code:: python +.. code-block:: python >>> r = requests.delete("https://pyaggr3g470r.herokuapp.com/api/v1.0/feeds/29", auth=("your-email", "your-password")) -- cgit