From 5881ed46862f398276183bc7999ac1c69b159696 Mon Sep 17 00:00:00 2001 From: Kamil Dudka Date: Fri, 28 Mar 2014 11:56:56 +0100 Subject: Fix curl's excessive memory consumption during scp download --- ...annel_write-client-spins-on-write-when-wi.patch | 45 +++++++ ...-redid-window-handling-for-flow-control-r.patch | 146 +++++++++++++++++++++ ...annel_read-fix-data-drop-when-out-of-wind.patch | 140 ++++++++++++++++++++ ...2_channel_read-Honour-window_size_initial.patch | 62 +++++++++ 0010-Set-default-window-size-to-2MB.patch | 85 ++++++++++++ ...eive_window_adjust-store-windows-size-alw.patch | 66 ++++++++++ libssh2.spec | 19 ++- 7 files changed, 562 insertions(+), 1 deletion(-) create mode 100644 0006-_libssh2_channel_write-client-spins-on-write-when-wi.patch create mode 100644 0007-window_size-redid-window-handling-for-flow-control-r.patch create mode 100644 0008-_libssh2_channel_read-fix-data-drop-when-out-of-wind.patch create mode 100644 0009-_libssh2_channel_read-Honour-window_size_initial.patch create mode 100644 0010-Set-default-window-size-to-2MB.patch create mode 100644 0011-channel_receive_window_adjust-store-windows-size-alw.patch diff --git a/0006-_libssh2_channel_write-client-spins-on-write-when-wi.patch b/0006-_libssh2_channel_write-client-spins-on-write-when-wi.patch new file mode 100644 index 0000000..4389e5e --- /dev/null +++ b/0006-_libssh2_channel_write-client-spins-on-write-when-wi.patch @@ -0,0 +1,45 @@ +From d0a263ef805244245afd9b709bdd3dc733113a6c Mon Sep 17 00:00:00 2001 +From: Daniel Stenberg +Date: Sat, 7 Sep 2013 13:41:14 +0200 +Subject: [PATCH 06/11] _libssh2_channel_write: client spins on write when window full + +When there's no window to "write to", there's no point in waiting for +the socket to become writable since it most likely just will continue to +be. + +Patch-by: ncm +Fixes #258 + +[upstream commit e6c46cc249227de7b7cd136d72eded5dcb3f9381] + +Signed-off-by: Kamil Dudka +--- + src/channel.c | 10 +++++++++- + 1 files changed, 9 insertions(+), 1 deletions(-) + +diff --git a/src/channel.c b/src/channel.c +index 9f2c241..74262d8 100644 +--- a/src/channel.c ++++ b/src/channel.c +@@ -2039,9 +2039,17 @@ _libssh2_channel_write(LIBSSH2_CHANNEL *channel, int stream_id, + if((rc < 0) && (rc != LIBSSH2_ERROR_EAGAIN)) + return rc; + +- if(channel->local.window_size <= 0) ++ if(channel->local.window_size <= 0) { + /* there's no room for data so we stop */ ++ ++ /* Waiting on the socket to be writable would be wrong because we ++ * would be back here immediately, but a readable socket might ++ * herald an incoming window adjustment. ++ */ ++ session->socket_block_directions = LIBSSH2_SESSION_BLOCK_INBOUND; ++ + return (rc==LIBSSH2_ERROR_EAGAIN?rc:0); ++ } + + channel->write_bufwrite = buflen; + +-- +1.7.1 + diff --git a/0007-window_size-redid-window-handling-for-flow-control-r.patch b/0007-window_size-redid-window-handling-for-flow-control-r.patch new file mode 100644 index 0000000..64b7607 --- /dev/null +++ b/0007-window_size-redid-window-handling-for-flow-control-r.patch @@ -0,0 +1,146 @@ +From 8af6637d86b6a85e8889c286f7ff3d841fc5621c Mon Sep 17 00:00:00 2001 +From: Salvador Fandino +Date: Sat, 12 Oct 2013 02:51:46 +0200 +Subject: [PATCH 07/11] window_size: redid window handling for flow control reasons + +Until now, the window size (channel->remote.window_size) was being +updated just after receiving the packet from the transport layer. + +That behaviour is wrong because the channel queue may grow uncontrolled +when data arrives from the network faster that the upper layer consumes +it. + +This patch adds a new counter, read_avail, which keeps a count of the +bytes available from the packet queue for reading. Also, now the window +size is adjusted when the data is actually read by an upper layer. + +That way, if the upper layer stops reading data, the window will +eventually fill and the remote host will stop sending data. When the +upper layers reads enough data, a window adjust packet is delivered and +the transfer resumes. + +The read_avail counter is used to detect the situation when the remote +server tries to send data surpassing the window size. In that case, the +extra data is discarded. + +Signed-off-by: Salvador + +[upstream commit cdeef54967ed5b7d5bd8fa6da5851aa3d173faa0] +Signed-off-by: Kamil Dudka +--- + src/channel.c | 8 +++++++- + src/libssh2_priv.h | 2 ++ + src/packet.c | 35 ++++++++++++++++++++++++++++------- + 3 files changed, 37 insertions(+), 8 deletions(-) + +diff --git a/src/channel.c b/src/channel.c +index 74262d8..499d815 100644 +--- a/src/channel.c ++++ b/src/channel.c +@@ -1411,6 +1411,9 @@ _libssh2_channel_flush(LIBSSH2_CHANNEL *channel, int streamid) + channel->flush_state = libssh2_NB_state_created; + } + ++ channel->read_avail -= channel->flush_flush_bytes; ++ channel->remote.window_size -= channel->flush_flush_bytes; ++ + if (channel->flush_refund_bytes) { + int rc; + +@@ -1868,11 +1871,14 @@ ssize_t _libssh2_channel_read(LIBSSH2_CHANNEL *channel, int stream_id, + /* if the transport layer said EAGAIN then we say so as well */ + return _libssh2_error(session, rc, "would block"); + } +- else ++ else { ++ channel->read_avail -= bytes_read; ++ channel->remote.window_size -= bytes_read; + /* make sure we remain in the created state to focus on emptying the + data we already have in the packet brigade before we try to read + more off the network again */ + channel->read_state = libssh2_NB_state_created; ++ } + + if(channel->remote.window_size < (LIBSSH2_CHANNEL_WINDOW_DEFAULT*30)) { + /* the window is getting too narrow, expand it! */ +diff --git a/src/libssh2_priv.h b/src/libssh2_priv.h +index 4ec9f73..fcf4370 100644 +--- a/src/libssh2_priv.h ++++ b/src/libssh2_priv.h +@@ -357,6 +357,8 @@ struct _LIBSSH2_CHANNEL + libssh2_channel_data local, remote; + /* Amount of bytes to be refunded to receive window (but not yet sent) */ + uint32_t adjust_queue; ++ /* Data immediately available for reading */ ++ uint32_t read_avail; + + LIBSSH2_SESSION *session; + +diff --git a/src/packet.c b/src/packet.c +index bfbd56a..d2e758c 100644 +--- a/src/packet.c ++++ b/src/packet.c +@@ -653,6 +653,18 @@ _libssh2_packet_add(LIBSSH2_SESSION * session, unsigned char *data, + _libssh2_debug(session, LIBSSH2_TRACE_CONN, + "Ignoring extended data and refunding %d bytes", + (int) (datalen - 13)); ++ if (channelp->read_avail + datalen - data_head >= ++ channelp->remote.window_size) ++ datalen = channelp->remote.window_size - ++ channelp->read_avail + data_head; ++ ++ channelp->remote.window_size -= datalen - data_head; ++ _libssh2_debug(session, LIBSSH2_TRACE_CONN, ++ "shrinking window size by %lu bytes to %lu, read_avail %lu", ++ datalen - data_head, ++ channelp->remote.window_size, ++ channelp->read_avail); ++ + session->packAdd_channelp = channelp; + + /* Adjust the window based on the block we just freed */ +@@ -684,7 +696,7 @@ _libssh2_packet_add(LIBSSH2_SESSION * session, unsigned char *data, + " to receive, truncating"); + datalen = channelp->remote.packet_size + data_head; + } +- if (channelp->remote.window_size <= 0) { ++ if (channelp->remote.window_size <= channelp->read_avail) { + /* + * Spec says we MAY ignore bytes sent beyond + * window_size +@@ -700,17 +712,26 @@ _libssh2_packet_add(LIBSSH2_SESSION * session, unsigned char *data, + /* Reset EOF status */ + channelp->remote.eof = 0; + +- if ((datalen - data_head) > channelp->remote.window_size) { ++ if (channelp->read_avail + datalen - data_head > ++ channelp->remote.window_size) { + _libssh2_error(session, + LIBSSH2_ERROR_CHANNEL_WINDOW_EXCEEDED, + "Remote sent more data than current " + "window allows, truncating"); +- datalen = channelp->remote.window_size + data_head; +- channelp->remote.window_size = 0; ++ datalen = channelp->remote.window_size - ++ channelp->read_avail + data_head; + } +- else +- /* Now that we've received it, shrink our window */ +- channelp->remote.window_size -= datalen - data_head; ++ ++ /* Update the read_avail counter. The window size will be ++ * updated once the data is actually read from the queue ++ * from an upper layer */ ++ channelp->read_avail += datalen - data_head; ++ ++ _libssh2_debug(session, LIBSSH2_TRACE_CONN, ++ "increasing read_avail by %lu bytes to %lu/%lu", ++ (long)(datalen - data_head), ++ (long)channelp->read_avail, ++ (long)channelp->remote.window_size); + + break; + +-- +1.7.1 + diff --git a/0008-_libssh2_channel_read-fix-data-drop-when-out-of-wind.patch b/0008-_libssh2_channel_read-fix-data-drop-when-out-of-wind.patch new file mode 100644 index 0000000..f06b7ad --- /dev/null +++ b/0008-_libssh2_channel_read-fix-data-drop-when-out-of-wind.patch @@ -0,0 +1,140 @@ +From cae2385ba898f71038ed4dd00ddae02f85e588e7 Mon Sep 17 00:00:00 2001 +From: Salvador +Date: Tue, 15 Oct 2013 11:45:10 +0200 +Subject: [PATCH 08/11] _libssh2_channel_read: fix data drop when out of window + +After filling the read buffer with data from the read queue, when the +window size was too small, "libssh2_channel_receive_window_adjust" was +called to increase it. In non-blocking mode that function could return +EAGAIN and, in that case, the EAGAIN was propagated upwards and the data +already read on the buffer lost. + +The function was also moving between the two read states +"libssh2_NB_state_idle" and "libssh2_NB_state_created" both of which +behave in the same way (excepting a debug statment). + +This commit modifies "_libssh2_channel_read" so that the +"libssh2_channel_receive_window_adjust" call is performed first (when +required) and if everything goes well, then it reads the data from the +queued packets into the read buffer. + +It also removes the useless "libssh2_NB_state_created" read state. + +Some rotted comments have also been updated. + +Signed-off-by: Salvador + +[upstream commit 27f9ac2549b7721cf9d857022c0e7a311830b367] +Signed-off-by: Kamil Dudka +--- + src/channel.c | 75 +++++++++++++++++++-------------------------------------- + 1 files changed, 25 insertions(+), 50 deletions(-) + +diff --git a/src/channel.c b/src/channel.c +index 499d815..82f6980 100644 +--- a/src/channel.c ++++ b/src/channel.c +@@ -1751,31 +1751,33 @@ ssize_t _libssh2_channel_read(LIBSSH2_CHANNEL *channel, int stream_id, + LIBSSH2_PACKET *read_packet; + LIBSSH2_PACKET *read_next; + +- if (channel->read_state == libssh2_NB_state_idle) { +- _libssh2_debug(session, LIBSSH2_TRACE_CONN, +- "channel_read() wants %d bytes from channel %lu/%lu " +- "stream #%d", +- (int) buflen, channel->local.id, channel->remote.id, +- stream_id); +- channel->read_state = libssh2_NB_state_created; +- } ++ _libssh2_debug(session, LIBSSH2_TRACE_CONN, ++ "channel_read() wants %d bytes from channel %lu/%lu " ++ "stream #%d", ++ (int) buflen, channel->local.id, channel->remote.id, ++ stream_id); + +- /* +- * =============================== NOTE =============================== +- * I know this is very ugly and not a really good use of "goto", but +- * this case statement would be even uglier to do it any other way +- */ +- if (channel->read_state == libssh2_NB_state_jump1) { +- goto channel_read_window_adjust; +- } ++ /* expand the receiving window first if it has become too narrow */ ++ if((channel->read_state == libssh2_NB_state_jump1) || ++ (channel->remote.window_size < (LIBSSH2_CHANNEL_WINDOW_DEFAULT*30))) { ++ ++ /* the actual window adjusting may not finish so we need to deal with ++ this special state here */ ++ channel->read_state = libssh2_NB_state_jump1; ++ rc = _libssh2_channel_receive_window_adjust(channel, ++ (LIBSSH2_CHANNEL_WINDOW_DEFAULT*60), ++ 0, NULL); ++ if (rc) ++ return rc; + +- rc = 1; /* set to >0 to let the while loop start */ ++ channel->read_state = libssh2_NB_state_idle; ++ } + +- /* Process all pending incoming packets in all states in order to "even +- out" the network readings. Tests prove that this way produces faster +- transfers. */ +- while (rc > 0) ++ /* Process all pending incoming packets. Tests prove that this way ++ produces faster transfers. */ ++ do { + rc = _libssh2_transport_read(session); ++ } while (rc > 0); + + if ((rc < 0) && (rc != LIBSSH2_ERROR_EAGAIN)) + return _libssh2_error(session, rc, "transport read"); +@@ -1857,8 +1859,6 @@ ssize_t _libssh2_channel_read(LIBSSH2_CHANNEL *channel, int stream_id, + } + + if (!bytes_read) { +- channel->read_state = libssh2_NB_state_idle; +- + /* If the channel is already at EOF or even closed, we need to signal + that back. We may have gotten that info while draining the incoming + transport layer until EAGAIN so we must not be fooled by that +@@ -1871,34 +1871,9 @@ ssize_t _libssh2_channel_read(LIBSSH2_CHANNEL *channel, int stream_id, + /* if the transport layer said EAGAIN then we say so as well */ + return _libssh2_error(session, rc, "would block"); + } +- else { +- channel->read_avail -= bytes_read; +- channel->remote.window_size -= bytes_read; +- /* make sure we remain in the created state to focus on emptying the +- data we already have in the packet brigade before we try to read +- more off the network again */ +- channel->read_state = libssh2_NB_state_created; +- } +- +- if(channel->remote.window_size < (LIBSSH2_CHANNEL_WINDOW_DEFAULT*30)) { +- /* the window is getting too narrow, expand it! */ +- +- channel_read_window_adjust: +- channel->read_state = libssh2_NB_state_jump1; +- /* the actual window adjusting may not finish so we need to deal with +- this special state here */ +- rc = _libssh2_channel_receive_window_adjust(channel, +- (LIBSSH2_CHANNEL_WINDOW_DEFAULT*60), 0, NULL); +- if (rc) +- return rc; + +- _libssh2_debug(session, LIBSSH2_TRACE_CONN, +- "channel_read() filled %d adjusted %d", +- bytes_read, buflen); +- /* continue in 'created' state to drain the already read packages +- first before starting to empty the socket further */ +- channel->read_state = libssh2_NB_state_created; +- } ++ channel->read_avail -= bytes_read; ++ channel->remote.window_size -= bytes_read; + + return bytes_read; + } +-- +1.7.1 + diff --git a/0009-_libssh2_channel_read-Honour-window_size_initial.patch b/0009-_libssh2_channel_read-Honour-window_size_initial.patch new file mode 100644 index 0000000..eea48df --- /dev/null +++ b/0009-_libssh2_channel_read-Honour-window_size_initial.patch @@ -0,0 +1,62 @@ +From 5c14f0e6ecfe73da86d3ad20edd60c4756037935 Mon Sep 17 00:00:00 2001 +From: Salvador +Date: Wed, 16 Oct 2013 13:31:31 +0200 +Subject: [PATCH 09/11] _libssh2_channel_read: Honour window_size_initial + +_libssh2_channel_read was using an arbitrary hard-coded limit to trigger +the window adjusting code. The adjustment used was also hard-coded and +arbitrary, 15MB actually, which would limit the usability of libssh2 on +systems with little RAM. + +This patch, uses the window_size parameter passed to +libssh2_channel_open_ex (stored as remote.window_size_initial) plus the +buflen as the base for the trigger and the adjustment calculation. + +The memory usage when using the default window size is reduced from 22MB +to 256KB per channel (actually, if compression is used, these numbers +should be incremented by ~50% to account for the errors between the +decompressed packet sizes and the predicted sizes). + +My tests indicate that this change does not impact the performance of +transfers across localhost or a LAN, being it on par with that of +OpenSSH. On the other hand, it will probably slow down transfers on +networks with high bandwidth*delay when the default window size +(LIBSSH2_CHANNEL_WINDOW_DEFAULT=256KB) is used. + +Signed-off-by: Salvador Fandino + +[upstream commit 1b3307dda0c58d9023a657747592ac86703b1ff4] +Signed-off-by: Kamil Dudka +--- + src/channel.c | 11 +++++++---- + 1 files changed, 7 insertions(+), 4 deletions(-) + +diff --git a/src/channel.c b/src/channel.c +index 82f6980..36c75d2 100644 +--- a/src/channel.c ++++ b/src/channel.c +@@ -1758,14 +1758,17 @@ ssize_t _libssh2_channel_read(LIBSSH2_CHANNEL *channel, int stream_id, + stream_id); + + /* expand the receiving window first if it has become too narrow */ +- if((channel->read_state == libssh2_NB_state_jump1) || +- (channel->remote.window_size < (LIBSSH2_CHANNEL_WINDOW_DEFAULT*30))) { ++ if( (channel->read_state == libssh2_NB_state_jump1) || ++ (channel->remote.window_size < channel->remote.window_size_initial / 4 * 3 + buflen) ) { ++ ++ uint32_t adjustment = channel->remote.window_size_initial + buflen - channel->remote.window_size; ++ if (adjustment < LIBSSH2_CHANNEL_MINADJUST) ++ adjustment = LIBSSH2_CHANNEL_MINADJUST; + + /* the actual window adjusting may not finish so we need to deal with + this special state here */ + channel->read_state = libssh2_NB_state_jump1; +- rc = _libssh2_channel_receive_window_adjust(channel, +- (LIBSSH2_CHANNEL_WINDOW_DEFAULT*60), ++ rc = _libssh2_channel_receive_window_adjust(channel, adjustment, + 0, NULL); + if (rc) + return rc; +-- +1.7.1 + diff --git a/0010-Set-default-window-size-to-2MB.patch b/0010-Set-default-window-size-to-2MB.patch new file mode 100644 index 0000000..0b8f693 --- /dev/null +++ b/0010-Set-default-window-size-to-2MB.patch @@ -0,0 +1,85 @@ +From 0a758095c40ae1b32dc5052a706a16c2d9ac5742 Mon Sep 17 00:00:00 2001 +From: Salvador Fandino +Date: Mon, 21 Oct 2013 11:58:55 +0200 +Subject: [PATCH 10/11] Set default window size to 2MB + +The default channel window size used until now was 256KB. This value is +too small and results on a bottleneck on real-life networks where +round-trip delays can easily reach 300ms. + +The issue was not visible because the configured channel window size +was being ignored and a hard-coded value of ~22MB being used instead, +but that was fixed on a previous commit. + +This patch just changes the default window size +(LIBSSH2_CHANNEL_WINDOW_DEFAULT) to 2MB. It is the same value used by +OpenSSH and in our opinion represents a good compromise between memory +used and transfer speed. + +Performance tests were run to determine the optimum value. The details +and related discussion are available from the following thread on the +libssh2 mailing-list: + +http://www.libssh2.org/mail/libssh2-devel-archive-2013-10/0018.shtml +http://article.gmane.org/gmane.network.ssh.libssh2.devel/6543 + +An excerpt follows: + +"I have been running some transfer test and measuring their speed. + +My setup was composed of a quad-core Linux machine running Ubuntu 13.10 +x86_64 with a LXC container inside. The data transfers were performed +from the container to the host (never crossing through a physical +network device). + +Network delays were simulated using the tc tool. And ping was used to +verify that they worked as intended during the tests. + +The operation performed was the equivalent to the following ssh command: + + $ ssh container "dd bs=16K count=8K if=/dev/zero" >/dev/null + +Though, establishment and closing of the SSH connection was excluded +from the timings. + +I run the tests several times transferring files of sizes up to 128MB +and the results were consistent between runs. + +The results corresponding to the 128MB transfer are available here: + +https://docs.google.com/spreadsheet/ccc?key=0Ao1yRmX6PQQzdG5wSFlrZl9HRWNET3ZyN0hnaGo5ZFE&usp=sharing + +It clearly shows that 256KB is too small as the default window size. +Moving to a 512MB generates a great improvement and after the 1MB mark +the returns rapidly diminish. Other factors (TCP window size, probably) +become more limiting than the channel window size + +For comparison I also performed the same transfers using OpenSSH. Its +speed is usually on par with that of libssh2 using a window size of 1MB +(even if it uses a 2MB window, maybe it is less aggressive sending the +window adjust msgs)." + +Signed-off-by: Salvador Fandino + +[upstream commit 85a827d1bceb9abd4442f225dd7c65ef5cefdc32] +Signed-off-by: Kamil Dudka +--- + include/libssh2.h | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/include/libssh2.h b/include/libssh2.h +index 9b1a6e1..df873fc 100644 +--- a/include/libssh2.h ++++ b/include/libssh2.h +@@ -587,7 +587,7 @@ LIBSSH2_API int libssh2_poll(LIBSSH2_POLLFD *fds, unsigned int nfds, + long timeout); + + /* Channel API */ +-#define LIBSSH2_CHANNEL_WINDOW_DEFAULT (256*1024) ++#define LIBSSH2_CHANNEL_WINDOW_DEFAULT (2*1024*1024) + #define LIBSSH2_CHANNEL_PACKET_DEFAULT 32768 + #define LIBSSH2_CHANNEL_MINADJUST 1024 + +-- +1.7.1 + diff --git a/0011-channel_receive_window_adjust-store-windows-size-alw.patch b/0011-channel_receive_window_adjust-store-windows-size-alw.patch new file mode 100644 index 0000000..b14f844 --- /dev/null +++ b/0011-channel_receive_window_adjust-store-windows-size-alw.patch @@ -0,0 +1,66 @@ +From baadc811a703b9a6dec655c7afb3218d8cff51fa Mon Sep 17 00:00:00 2001 +From: Daniel Stenberg +Date: Sun, 16 Mar 2014 20:02:37 +0100 +Subject: [PATCH 11/11] channel_receive_window_adjust: store windows size always + +Avoid it sometimes returning without storing it, leaving calling +functions with unknown content! + +Detected by clang-analyzer + +[upstream commit fcb601da7b37c6e9bbcd264199597e2ddb7bc347] + +Signed-off-by: Kamil Dudka +--- + src/channel.c | 11 ++++------- + 1 files changed, 4 insertions(+), 7 deletions(-) + +diff --git a/src/channel.c b/src/channel.c +index 36c75d2..1d074df 100644 +--- a/src/channel.c ++++ b/src/channel.c +@@ -1,6 +1,6 @@ + /* Copyright (c) 2004-2007 Sara Golemon + * Copyright (c) 2005 Mikhail Gusarov +- * Copyright (c) 2008-2011 by Daniel Stenberg ++ * Copyright (c) 2008-2014 by Daniel Stenberg + * + * All rights reserved. + * +@@ -1544,6 +1544,9 @@ _libssh2_channel_receive_window_adjust(LIBSSH2_CHANNEL * channel, + { + int rc; + ++ if(store) ++ *store = channel->remote.window_size; ++ + if (channel->adjust_state == libssh2_NB_state_idle) { + if (!force + && (adjustment + channel->adjust_queue < +@@ -1553,14 +1556,10 @@ _libssh2_channel_receive_window_adjust(LIBSSH2_CHANNEL * channel, + "for channel %lu/%lu", + adjustment, channel->local.id, channel->remote.id); + channel->adjust_queue += adjustment; +- if(store) +- *store = channel->remote.window_size; + return 0; + } + + if (!adjustment && !channel->adjust_queue) { +- if(store) +- *store = channel->remote.window_size; + return 0; + } + +@@ -1598,8 +1597,6 @@ _libssh2_channel_receive_window_adjust(LIBSSH2_CHANNEL * channel, + + channel->adjust_state = libssh2_NB_state_idle; + +- if(store) +- *store = channel->remote.window_size; + return 0; + } + +-- +1.7.1 + diff --git a/libssh2.spec b/libssh2.spec index a0eec8b..e32833d 100644 --- a/libssh2.spec +++ b/libssh2.spec @@ -12,7 +12,7 @@ Name: libssh2 Version: 1.4.3 -Release: 11%{?dist} +Release: 12%{?dist} Summary: A library implementing the SSH2 protocol Group: System Environment/Libraries License: BSD @@ -24,6 +24,12 @@ Patch2: 0002-sftp-statvfs-Along-error-path-reset-the-correct-stat.patch Patch3: 0003-sftp-Add-support-for-fsync-OpenSSH-extension.patch Patch4: 0004-partially-revert-window_size-explicit-adjustments-on.patch Patch5: 0005-channel.c-fix-a-use-after-free.patch +Patch6: 0006-_libssh2_channel_write-client-spins-on-write-when-wi.patch +Patch7: 0007-window_size-redid-window-handling-for-flow-control-r.patch +Patch8: 0008-_libssh2_channel_read-fix-data-drop-when-out-of-wind.patch +Patch9: 0009-_libssh2_channel_read-Honour-window_size_initial.patch +Patch10: 0010-Set-default-window-size-to-2MB.patch +Patch11: 0011-channel_receive_window_adjust-store-windows-size-alw.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(id -nu) BuildRequires: openssl-devel BuildRequires: zlib-devel @@ -88,6 +94,14 @@ sed -i s/4711/47%{?__isa_bits}/ tests/ssh2.{c,sh} # https://trac.libssh2.org/ticket/268 %patch5 -p1 +# Fix curl's excessive memory consumption during scp download +%patch6 -p1 +%patch7 -p1 +%patch8 -p1 +%patch9 -p1 +%patch10 -p1 +%patch11 -p1 + # Make sshd transition appropriately if building in an SELinux environment %if !(0%{?fedora} >= 17 || 0%{?rhel} >= 7) chcon $(/usr/sbin/matchpathcon -n /etc/rc.d/init.d/sshd) tests/ssh2.sh || : @@ -160,6 +174,9 @@ rm -rf %{buildroot} %{_libdir}/pkgconfig/libssh2.pc %changelog +* Wed Apr 30 2014 Kamil Dudka 1.4.3-12 +- Fix curl's excessive memory consumption during scp download + * Mon Feb 17 2014 Paul Howarth - 1.4.3-11 - The aarch64 buildroot seems to have the same locale issue as the PPC one -- cgit