From d911517dc2f9c4c3ce57529ac4d64c17185544e9 Mon Sep 17 00:00:00 2001 From: Guido Günther Date: Mon, 25 May 2009 18:39:27 +0200 Subject: Imported Upstream version 0.10 --- configure | 33049 ++++++++++++++++++++++++------------------------------------ 1 file changed, 13116 insertions(+), 19933 deletions(-) (limited to 'configure') diff --git a/configure b/configure index 1ed3a47..e92158c 100755 --- a/configure +++ b/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.63 for krb5-auth-dialog 0.9.1. +# Generated by GNU Autoconf 2.63 for krb5-auth-dialog 0.10. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. @@ -575,22 +575,22 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} -case X$ECHO in +case X$lt_ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac -echo=${ECHO-echo} +ECHO=${lt_ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! : else # Restart under the correct shell. @@ -600,9 +600,9 @@ fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift - cat </dev/null 2>&1 && unset CDPATH -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else - # maybe with a smaller string... - prev=: + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi fi fi fi fi -fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi -tagnames=${tagnames+${tagnames},}CXX - -tagnames=${tagnames+${tagnames},}F77 - exec 7<&0 &1 # Name of the host. @@ -748,8 +743,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='krb5-auth-dialog' PACKAGE_TARNAME='krb5-auth-dialog' -PACKAGE_VERSION='0.9.1' -PACKAGE_STRING='krb5-auth-dialog 0.9.1' +PACKAGE_VERSION='0.10' +PACKAGE_STRING='krb5-auth-dialog 0.10' PACKAGE_BUGREPORT='' ac_unique_file="src/krb5-auth-dialog.c" @@ -808,28 +803,22 @@ ENABLE_PKINIT_TRUE KRB5_LIBS KRB5_CFLAGS KRB5_CONFIG +GCONFTOOL +GCONF_SCHEMAS_INSTALL_FALSE +GCONF_SCHEMAS_INSTALL_TRUE +GCONF_SCHEMA_FILE_DIR +GCONF_SCHEMA_CONFIG_SOURCE +GIO_LIBS +GIO_CFLAGS GIO_UNIX_LIBS GIO_UNIX_CFLAGS GCONF_LIBS GCONF_CFLAGS DBUS_LIBS DBUS_CFLAGS -GLADE_LIBS -GLADE_CFLAGS GTK_LIBS GTK_CFLAGS PKG_CONFIG -MKINSTALLDIRS -POSUB -POFILES -PO_IN_DATADIR_FALSE -PO_IN_DATADIR_TRUE -INTLLIBS -INSTOBJEXT -GMOFILES -CATOBJEXT -CATALOGS -MSGFMT_OPTS WARN_PYTHON_CFLAGS WARN_CFLAGS COMPILER_FLAGS @@ -838,53 +827,21 @@ YACC LEXLIB LEX_OUTPUT_ROOT LEX -DATADIRNAME -ALL_LINGUAS -INTLTOOL_PERL -GMSGFMT -MSGFMT -MSGMERGE -XGETTEXT -INTLTOOL_POLICY_RULE -INTLTOOL_SERVICE_RULE -INTLTOOL_THEME_RULE -INTLTOOL_SCHEMAS_RULE -INTLTOOL_CAVES_RULE -INTLTOOL_XML_NOMERGE_RULE -INTLTOOL_XML_RULE -INTLTOOL_KBD_RULE -INTLTOOL_XAM_RULE -INTLTOOL_UI_RULE -INTLTOOL_SOUNDLIST_RULE -INTLTOOL_SHEET_RULE -INTLTOOL_SERVER_RULE -INTLTOOL_PONG_RULE -INTLTOOL_OAF_RULE -INTLTOOL_PROP_RULE -INTLTOOL_KEYS_RULE -INTLTOOL_DIRECTORY_RULE -INTLTOOL_DESKTOP_RULE -INTLTOOL_EXTRACT -INTLTOOL_MERGE -INTLTOOL_UPDATE -USE_NLS -LIBTOOL -ac_ct_F77 -FFLAGS -F77 -CXXCPP -am__fastdepCXX_FALSE -am__fastdepCXX_TRUE -CXXDEPMODE -ac_ct_CXX -CXXFLAGS -CXX +OTOOL64 +OTOOL +LIPO NMEDIT DSYMUTIL +lt_ECHO RANLIB AR -ECHO +OBJDUMP LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP SED host_os host_vendor @@ -894,9 +851,23 @@ build_os build_vendor build_cpu build +LIBTOOL +MKINSTALLDIRS +POSUB +POFILES +PO_IN_DATADIR_FALSE +PO_IN_DATADIR_TRUE +INTLLIBS +INSTOBJEXT +GMOFILES +CATOBJEXT +CATALOGS +MSGFMT_OPTS EGREP GREP CPP +GETTEXT_PACKAGE +DATADIRNAME am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE @@ -913,7 +884,35 @@ CPPFLAGS LDFLAGS CFLAGS CC -GETTEXT_PACKAGE +ALL_LINGUAS +INTLTOOL_PERL +GMSGFMT +MSGFMT +MSGMERGE +XGETTEXT +INTLTOOL_POLICY_RULE +INTLTOOL_SERVICE_RULE +INTLTOOL_THEME_RULE +INTLTOOL_SCHEMAS_RULE +INTLTOOL_CAVES_RULE +INTLTOOL_XML_NOMERGE_RULE +INTLTOOL_XML_RULE +INTLTOOL_KBD_RULE +INTLTOOL_XAM_RULE +INTLTOOL_UI_RULE +INTLTOOL_SOUNDLIST_RULE +INTLTOOL_SHEET_RULE +INTLTOOL_SERVER_RULE +INTLTOOL_PONG_RULE +INTLTOOL_OAF_RULE +INTLTOOL_PROP_RULE +INTLTOOL_KEYS_RULE +INTLTOOL_DIRECTORY_RULE +INTLTOOL_DESKTOP_RULE +INTLTOOL_EXTRACT +INTLTOOL_MERGE +INTLTOOL_UPDATE +USE_NLS MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -981,17 +980,19 @@ ac_subst_files='' ac_user_opts=' enable_option_checking enable_maintainer_mode +enable_nls enable_dependency_tracking enable_shared enable_static +with_pic enable_fast_install with_gnu_ld enable_libtool_lock -with_pic -with_tags -enable_nls enable_compile_warnings enable_iso_c +with_gconf_source +with_gconf_schema_file_dir +enable_schemas_install enable_debug enable_pkinit enable_network_manager @@ -1007,25 +1008,19 @@ LDFLAGS LIBS CPPFLAGS CPP -CXX -CXXFLAGS -CCC -CXXCPP -F77 -FFLAGS YACC YFLAGS PKG_CONFIG GTK_CFLAGS GTK_LIBS -GLADE_CFLAGS -GLADE_LIBS DBUS_CFLAGS DBUS_LIBS GCONF_CFLAGS GCONF_LIBS GIO_UNIX_CFLAGS GIO_UNIX_LIBS +GIO_CFLAGS +GIO_LIBS NETWORK_MANAGER_CFLAGS NETWORK_MANAGER_LIBS LIBNOTIFY_CFLAGS @@ -1582,7 +1577,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures krb5-auth-dialog 0.9.1 to adapt to many kinds of systems. +\`configure' configures krb5-auth-dialog 0.10 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1653,7 +1648,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of krb5-auth-dialog 0.9.1:";; + short | recursive ) echo "Configuration of krb5-auth-dialog 0.10:";; esac cat <<\_ACEOF @@ -1663,6 +1658,7 @@ Optional Features: --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer + --disable-nls do not use Native Language Support --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-shared[=PKGS] build shared libraries [default=yes] @@ -1670,10 +1666,10 @@ Optional Features: --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) - --disable-nls do not use Native Language Support --enable-compile-warnings=[no/minimum/yes/maximum/error] Turn on compiler warnings --enable-iso-c Try to warn if code is not ISO C + --disable-schemas-install Disable the schemas installation --enable-debug=no/yes enable debugging output --enable-pkinit whether to enable preauth via pkinit support --enable-network-manager @@ -1683,10 +1679,13 @@ Optional Features: Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-pic try to use only PIC/non-PIC objects [default=use both] - --with-tags[=TAGS] include additional configurations [automatic] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-gconf-source=sourceaddress + Config database for installing schema files. + --with-gconf-schema-file-dir=dir + Directory for installing schema files. --with-libnotify use libnotify for status messages --without-libcap Disable support for capabilities library @@ -1699,11 +1698,6 @@ Some influential environment variables: CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CXXCPP C++ preprocessor - F77 Fortran 77 compiler command - FFLAGS Fortran 77 compiler flags YACC The `Yet Another C Compiler' implementation to use. Defaults to the first program found out of: `bison -y', `byacc', `yacc'. YFLAGS The list of arguments that will be passed by default to $YACC. @@ -1712,9 +1706,6 @@ Some influential environment variables: PKG_CONFIG path to pkg-config utility GTK_CFLAGS C compiler flags for GTK, overriding pkg-config GTK_LIBS linker flags for GTK, overriding pkg-config - GLADE_CFLAGS - C compiler flags for GLADE, overriding pkg-config - GLADE_LIBS linker flags for GLADE, overriding pkg-config DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config DBUS_LIBS linker flags for DBUS, overriding pkg-config GCONF_CFLAGS @@ -1724,6 +1715,8 @@ Some influential environment variables: C compiler flags for GIO_UNIX, overriding pkg-config GIO_UNIX_LIBS linker flags for GIO_UNIX, overriding pkg-config + GIO_CFLAGS C compiler flags for GIO, overriding pkg-config + GIO_LIBS linker flags for GIO, overriding pkg-config NETWORK_MANAGER_CFLAGS C compiler flags for NETWORK_MANAGER, overriding pkg-config NETWORK_MANAGER_LIBS @@ -1798,7 +1791,7 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -krb5-auth-dialog configure 0.9.1 +krb5-auth-dialog configure 0.10 generated by GNU Autoconf 2.63 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, @@ -1812,7 +1805,7 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by krb5-auth-dialog $as_me 0.9.1, which was +It was created by krb5-auth-dialog $as_me 0.10, which was generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ @@ -2529,7 +2522,7 @@ fi # Define the identity of the package. PACKAGE='krb5-auth-dialog' - VERSION='0.9.1' + VERSION='0.10' cat >>confdefs.h <<_ACEOF @@ -2697,13 +2690,80 @@ fi -GETTEXT_PACKAGE=krb5-auth-dialog + { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +$as_echo_n "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +if test "${enable_nls+set}" = set; then + enableval=$enable_nls; USE_NLS=$enableval +else + USE_NLS=yes +fi + + { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } -cat >>confdefs.h <<_ACEOF -#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" -_ACEOF +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi ac_ext=c @@ -3638,94 +3698,32 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" -ac_config_commands="$ac_config_commands depfiles" +depcc="$CC" am_compiler_list= - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then @@ -3810,497 +3808,553 @@ fi -{ $as_echo "$as_me:$LINENO: checking for library containing strerror" >&5 -$as_echo_n "checking for library containing strerror... " >&6; } -if test "${ac_cv_search_strerror+set}" = set; then + + +case "$am__api_version" in + 1.01234) + { { $as_echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 +$as_echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} + { (exit 1); exit 1; }; } + ;; + *) + ;; +esac + +if test -n "0.35.0"; then + { $as_echo "$as_me:$LINENO: checking for intltool >= 0.35.0" >&5 +$as_echo_n "checking for intltool >= 0.35.0... " >&6; } + + INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` + INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + + { $as_echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 +$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } + test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || + { { $as_echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.35.0 or later." >&5 +$as_echo "$as_me: error: Your intltool is too old. You need intltool 0.35.0 or later." >&2;} + { (exit 1); exit 1; }; } +fi + +# Extract the first word of "intltool-update", so it can be a program name with args. +set dummy intltool-update; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then $as_echo_n "(cached) " >&6 else - ac_func_search_save_LIBS=$LIBS -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char strerror (); -int -main () -{ -return strerror (); - ; - return 0; -} -_ACEOF -for ac_lib in '' cposix; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" + case $INTLTOOL_UPDATE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +done +done +IFS=$as_save_IFS + + ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_search_strerror=$ac_res +fi +INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE +if test -n "$INTLTOOL_UPDATE"; then + { $as_echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 +$as_echo "$INTLTOOL_UPDATE" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -fi +# Extract the first word of "intltool-merge", so it can be a program name with args. +set dummy intltool-merge; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $INTLTOOL_MERGE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext - if test "${ac_cv_search_strerror+set}" = set; then - break + ;; +esac fi -done -if test "${ac_cv_search_strerror+set}" = set; then - : +INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE +if test -n "$INTLTOOL_MERGE"; then + { $as_echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 +$as_echo "$INTLTOOL_MERGE" >&6; } else - ac_cv_search_strerror=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 -$as_echo "$ac_cv_search_strerror" >&6; } -ac_res=$ac_cv_search_strerror -if test "$ac_res" != no; then - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then +# Extract the first word of "intltool-extract", so it can be a program name with args. +set dummy intltool-extract; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then $as_echo_n "(cached) " >&6 else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes + case $INTLTOOL_EXTRACT in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + + ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : +fi +INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT +if test -n "$INTLTOOL_EXTRACT"; then + { $as_echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 +$as_echo "$INTLTOOL_EXTRACT" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi - # Broken: fails on valid input. -continue + +if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then + { { $as_echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 +$as_echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} + { (exit 1); exit 1; }; } fi -rm -f conftest.err conftest.$ac_ext + INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' + INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' +INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' + INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' + INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - done - ac_cv_prog_CPP=$CPP -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# Check the gettext tools to make sure they are GNU +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_XGETTEXT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $XGETTEXT in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } - fi -else - ac_cv_path_GREP=$GREP -fi + ;; +esac +fi +XGETTEXT=$ac_cv_path_XGETTEXT +if test -n "$XGETTEXT"; then + { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" -{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_MSGMERGE+set}" = set; then $as_echo_n "(cached) " >&6 else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST + case $MSGMERGE in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } - fi -else - ac_cv_path_EGREP=$EGREP -fi - fi + ;; +esac +fi +MSGMERGE=$ac_cv_path_MSGMERGE +if test -n "$MSGMERGE"; then + { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_MSGFMT+set}" = set; then $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + case $MSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + + ;; +esac +fi +MSGFMT=$ac_cv_path_MSGFMT +if test -n "$MSGFMT"; then + { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +# Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_GMSGFMT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then + { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } +fi +xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" +mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" +mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" +if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then + { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } +fi + +# Extract the first word of "perl", so it can be a program name with args. +set dummy perl; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $INTLTOOL_PERL in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + + ;; +esac +fi +INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL +if test -n "$INTLTOOL_PERL"; then + { $as_echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 +$as_echo "$INTLTOOL_PERL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +if test -z "$INTLTOOL_PERL"; then + { { $as_echo "$as_me:$LINENO: error: perl not found" >&5 +$as_echo "$as_me: error: perl not found" >&2;} + { (exit 1); exit 1; }; } +fi +{ $as_echo "$as_me:$LINENO: checking for perl >= 5.8.1" >&5 +$as_echo_n "checking for perl >= 5.8.1... " >&6; } +$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 +if test $? -ne 0; then + { { $as_echo "$as_me:$LINENO: error: perl 5.8.1 is required for intltool" >&5 +$as_echo "$as_me: error: perl 5.8.1 is required for intltool" >&2;} + { (exit 1); exit 1; }; } +else + IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" + { $as_echo "$as_me:$LINENO: result: $IT_PERL_VERSION" >&5 +$as_echo "$IT_PERL_VERSION" >&6; } +fi +if test "x" != "xno-xml"; then + { $as_echo "$as_me:$LINENO: checking for XML::Parser" >&5 +$as_echo_n "checking for XML::Parser... " >&6; } + if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then + { $as_echo "$as_me:$LINENO: result: ok" >&5 +$as_echo "ok" >&6; } + else + { { $as_echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 +$as_echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# Substitute ALL_LINGUAS so we can use it in po/Makefile + + +# Set DATADIRNAME correctly if it is not set yet +# (copied from glib-gettext.m4) +if test -z "$DATADIRNAME"; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include -#include -#include -#include int main () { - +extern int _nl_msg_cat_cntr; + return _nl_msg_cat_cntr ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -4309,96 +4363,68 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + DATADIRNAME=share else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_header_stdc=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + case $host in + *-*-solaris*) + { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +$as_echo_n "checking for bind_textdomain_codeset... " >&6; } +if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then + $as_echo_n "(cached) " >&6 +else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. + For example, HP-UX 11i declares gettimeofday. */ +#define bind_textdomain_codeset innocuous_bind_textdomain_codeset -fi +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char bind_textdomain_codeset (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +#ifdef __STDC__ +# include +#else +# include +#endif -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +#undef bind_textdomain_codeset -fi +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char bind_textdomain_codeset (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset +choke me +#endif -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; +return bind_textdomain_codeset (); + ; return 0; } _ACEOF -rm -f conftest$ac_exeext +rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; @@ -4406,810 +4432,566 @@ case "(($ac_try" in esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_bind_textdomain_codeset=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi + ac_cv_func_bind_textdomain_codeset=no fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi - -# Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } +if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then + DATADIRNAME=share else - enable_shared=yes + DATADIRNAME=lib fi - -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; + ;; *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; + DATADIRNAME=lib + ;; esac -else - enable_static=yes fi - -# Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -$as_echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi +GETTEXT_PACKAGE=krb5-auth-dialog -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -$as_echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + +cat >>confdefs.h <<_ACEOF +#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" +_ACEOF -{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if test "${lt_cv_path_SED+set}" = set; then +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. +continue fi -SED=$lt_cv_path_SED - -{ $as_echo "$as_me:$LINENO: result: $SED" >&5 -$as_echo "$SED" >&6; } - +rm -f conftest.err conftest.$ac_ext -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue else - with_gnu_ld=no -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + done + ac_cv_prog_CPP=$CPP + fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then - $as_echo_n "(cached) " >&6 + CPP=$ac_cv_prog_CPP else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld +rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac - -{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -$as_echo_n "checking for BSD-compatible nm... " >&6; } -if test "${lt_cv_path_NM+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -NM="$lt_cv_path_NM" + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } + # Passes both tests. +ac_preproc_ok=: +break fi -{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. +rm -f conftest.err conftest.$ac_ext -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi -beos*) - lt_cv_deplibs_check_method=pass_all - ;; +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' + $ac_path_GREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; +else + ac_cv_path_GREP=$GREP +fi -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + $ac_path_EGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi - ;; +else + ac_cv_path_EGREP=$EGREP +fi -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; +int +main () +{ -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_header_stdc=no fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +fi -# Allow CC to be a program name with arguments. -compiler=$CC +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no fi +rm -f conftest* -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +fi -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 5094 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then - $as_echo_n "(cached) " >&6 +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { - - ; + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext +rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; @@ -5217,73 +4999,45 @@ case "(($ac_try" in esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_link") 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - lt_cv_cc_needs_belf=yes + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : else - $as_echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - lt_cv_cc_needs_belf=no +( exit $ac_status ) +ac_cv_header_stdc=no fi - rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then -need_locks="$enable_libtool_lock" +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF +fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. @@ -5359,7 +5113,8 @@ done -for ac_header in dlfcn.h + +for ac_header in locale.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then @@ -5504,177 +5259,99 @@ fi done -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -z "$CXX"; then - if test -n "$CCC"; then - CXX=$CCC - else - if test -n "$ac_tool_prefix"; then - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then + if test $ac_cv_header_locale_h = yes; then + { $as_echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 +$as_echo_n "checking for LC_MESSAGES... " >&6; } +if test "${am_cv_val_LC_MESSAGES+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +return LC_MESSAGES + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + am_cv_val_LC_MESSAGES=yes else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + am_cv_val_LC_MESSAGES=no fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - { $as_echo "$as_me:$LINENO: result: $CXX" >&5 -$as_echo "$CXX" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - test -n "$CXX" && break - done +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS +{ $as_echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 +$as_echo "$am_cv_val_LC_MESSAGES" >&6; } + if test $am_cv_val_LC_MESSAGES = yes; then -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -$as_echo "$ac_ct_CXX" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi +cat >>confdefs.h <<\_ACEOF +#define HAVE_LC_MESSAGES 1 +_ACEOF + fi + fi + USE_NLS=yes - test -n "$ac_ct_CXX" && break -done - if test "x$ac_ct_CXX" = x; then - CXX="g++" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CXX=$ac_ct_CXX - fi -fi + gt_cv_have_gettext=no - fi -fi -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + CATOBJEXT=NONE + XGETTEXT=: + INTLLIBS= -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + if test "${ac_cv_header_libintl_h+set}" = set; then + { $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +$as_echo_n "checking for libintl.h... " >&6; } +if test "${ac_cv_header_libintl_h+set}" = set; then $as_echo_n "(cached) " >&6 +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +$as_echo "$ac_cv_header_libintl_h" >&6; } else - cat >conftest.$ac_ext <<_ACEOF + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking libintl.h usability" >&5 +$as_echo_n "checking libintl.h usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} +$ac_includes_default +#include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" @@ -5691,1228 +5368,1016 @@ $as_echo "$ac_try_echo") >&5 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || + test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes + ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_compiler_gnu=no + ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GXX=yes -else - GXX= -fi -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -$as_echo_n "checking whether $CXX accepts -g... " >&6; } -if test "${ac_cv_prog_cxx_g+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - ac_cv_prog_cxx_g=no - CXXFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking libintl.h presence" >&5 +$as_echo_n "checking libintl.h presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} +#include _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cxx_g=yes + }; then + ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - CXXFLAGS="" - cat >conftest.$ac_ext <<_ACEOF + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} + + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +$as_echo_n "checking for libintl.h... " >&6; } +if test "${ac_cv_header_libintl_h+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_header_libintl_h=$ac_header_preproc +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +$as_echo "$ac_cv_header_libintl_h" >&6; } + +fi +if test "x$ac_cv_header_libintl_h" = x""yes; then + gt_cv_func_dgettext_libintl="no" + libintl_extra_libs="" + + # + # First check in libc + # + { $as_echo "$as_me:$LINENO: checking for ngettext in libc" >&5 +$as_echo_n "checking for ngettext in libc... " >&6; } +if test "${gt_cv_func_ngettext_libc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include + int main () { - +return !ngettext ("","", 1) ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || + test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + gt_cv_func_ngettext_libc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cxx_werror_flag=$ac_save_cxx_werror_flag - CXXFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF + gt_cv_func_ngettext_libc=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + +fi +{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 +$as_echo "$gt_cv_func_ngettext_libc" >&6; } + + if test "$gt_cv_func_ngettext_libc" = "yes" ; then + { $as_echo "$as_me:$LINENO: checking for dgettext in libc" >&5 +$as_echo_n "checking for dgettext in libc... " >&6; } +if test "${gt_cv_func_dgettext_libc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include + int main () { - +return !dgettext ("","") ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || + test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cxx_g=yes + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + gt_cv_func_dgettext_libc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + gt_cv_func_dgettext_libc=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cxx_werror_flag=$ac_save_cxx_werror_flag -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -$as_echo "$ac_cv_prog_cxx_g" >&6; } -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -depcc="$CXX" am_compiler_list= - -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CXX_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CXX_dependencies_compiler_type=$depmode - break +{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 +$as_echo "$gt_cv_func_dgettext_libc" >&6; } fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CXX_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } -CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then - am__fastdepCXX_TRUE= - am__fastdepCXX_FALSE='#' -else - am__fastdepCXX_TRUE='#' - am__fastdepCXX_FALSE= -fi - - + if test "$gt_cv_func_ngettext_libc" = "yes" ; then -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then +for ac_func in bind_textdomain_codeset +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + #ifdef __STDC__ # include #else # include #endif - Syntax error + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext }; then - : + eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue + eval "$as_ac_var=no" fi -rm -f conftest.err conftest.$ac_ext +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF +fi +done + + fi + + # + # If we don't have everything we want, check in libintl + # + if test "$gt_cv_func_dgettext_libc" != "yes" \ + || test "$gt_cv_func_ngettext_libc" != "yes" \ + || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then + + { $as_echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 +$as_echo_n "checking for bindtextdomain in -lintl... " >&6; } +if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char bindtextdomain (); +int +main () +{ +return bindtextdomain (); + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext }; then - # Broken: success on invalid input. -continue + ac_cv_lib_intl_bindtextdomain=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break + ac_cv_lib_intl_bindtextdomain=no fi - done - ac_cv_prog_CXXCPP=$CXXCPP - +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi - CXXCPP=$ac_cv_prog_CXXCPP +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 +$as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } +if test "x$ac_cv_lib_intl_bindtextdomain" = x""yes; then + { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +$as_echo_n "checking for ngettext in -lintl... " >&6; } +if test "${ac_cv_lib_intl_ngettext+set}" = set; then + $as_echo_n "(cached) " >&6 else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" #endif - Syntax error +char ngettext (); +int +main () +{ +return ngettext (); + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext }; then - : + ac_cv_lib_intl_ngettext=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue + ac_cv_lib_intl_ngettext=no fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +$as_echo "$ac_cv_lib_intl_ngettext" >&6; } +if test "x$ac_cv_lib_intl_ngettext" = x""yes; then + { $as_echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 +$as_echo_n "checking for dgettext in -lintl... " >&6; } +if test "${ac_cv_lib_intl_dgettext+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dgettext (); +int +main () +{ +return dgettext (); + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext }; then - # Broken: success on invalid input. -continue + ac_cv_lib_intl_dgettext=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break + ac_cv_lib_intl_dgettext=no fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 +$as_echo "$ac_cv_lib_intl_dgettext" >&6; } +if test "x$ac_cv_lib_intl_dgettext" = x""yes; then + gt_cv_func_dgettext_libintl=yes fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi fi -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_F77+set}" = set; then + if test "$gt_cv_func_dgettext_libintl" != "yes" ; then + { $as_echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 +$as_echo_n "checking if -liconv is needed to use gettext... " >&6; } + { $as_echo "$as_me:$LINENO: result: " >&5 +$as_echo "" >&6; } + { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +$as_echo_n "checking for ngettext in -lintl... " >&6; } +if test "${ac_cv_lib_intl_ngettext+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$F77"; then - ac_cv_prog_F77="$F77" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_F77="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl -liconv $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -fi -fi -F77=$ac_cv_prog_F77 -if test -n "$F77"; then - { $as_echo "$as_me:$LINENO: result: $F77" >&5 -$as_echo "$F77" >&6; } +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char ngettext (); +int +main () +{ +return ngettext (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_intl_ngettext=yes else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_lib_intl_ngettext=no +fi - test -n "$F77" && break - done +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -if test -z "$F77"; then - ac_ct_F77=$F77 - for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_F77+set}" = set; then +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +$as_echo "$ac_cv_lib_intl_ngettext" >&6; } +if test "x$ac_cv_lib_intl_ngettext" = x""yes; then + { $as_echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 +$as_echo_n "checking for dcgettext in -lintl... " >&6; } +if test "${ac_cv_lib_intl_dcgettext+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_F77"; then - ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_F77="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_F77=$ac_cv_prog_ac_ct_F77 -if test -n "$ac_ct_F77"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 -$as_echo "$ac_ct_F77" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_F77" && break -done - - if test "x$ac_ct_F77" = x; then - F77="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - F77=$ac_ct_F77 - fi -fi - + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl -liconv $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -rm -f a.out - -# If we don't use `.F' as extension, the preprocessor is not run on the -# input file. (Note that this only needs to work for GNU compilers.) -ac_save_ext=$ac_ext -ac_ext=F -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 -$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } -if test "${ac_cv_f77_compiler_gnu+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF - program main -#ifndef __GNUC__ - choke me +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" #endif - - end +char dcgettext (); +int +main () +{ +return dcgettext (); + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || + test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_intl_dcgettext=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_compiler_gnu=no + ac_cv_lib_intl_dcgettext=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_f77_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 -$as_echo "$ac_cv_f77_compiler_gnu" >&6; } -ac_ext=$ac_save_ext -ac_test_FFLAGS=${FFLAGS+set} -ac_save_FFLAGS=$FFLAGS -FFLAGS= -{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 -$as_echo_n "checking whether $F77 accepts -g... " >&6; } -if test "${ac_cv_prog_f77_g+set}" = set; then +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 +$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } +if test "x$ac_cv_lib_intl_dcgettext" = x""yes; then + gt_cv_func_dgettext_libintl=yes + libintl_extra_libs=-liconv +else + : +fi + +else + : +fi + + fi + + # + # If we found libintl, then check in it for bind_textdomain_codeset(); + # we'll prefer libc if neither have bind_textdomain_codeset(), + # and both have dgettext and ngettext + # + if test "$gt_cv_func_dgettext_libintl" = "yes" ; then + glib_save_LIBS="$LIBS" + LIBS="$LIBS -lintl $libintl_extra_libs" + unset ac_cv_func_bind_textdomain_codeset + +for ac_func in bind_textdomain_codeset +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else - FFLAGS=-g -cat >conftest.$ac_ext <<_ACEOF - program main + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif - end +int +main () +{ +return $ac_func (); + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || + test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_f77_g=yes + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_prog_f77_g=no + eval "$as_ac_var=no" fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 -$as_echo "$ac_cv_prog_f77_g" >&6; } -if test "$ac_test_FFLAGS" = set; then - FFLAGS=$ac_save_FFLAGS -elif test $ac_cv_prog_f77_g = yes; then - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-g -O2" - else - FFLAGS="-g" - fi -else - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-O2" - else - FFLAGS= - fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if test $ac_compiler_gnu = yes; then - G77=yes -else - G77= fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +done + LIBS="$glib_save_LIBS" + if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then + gt_cv_func_dgettext_libc=no + else + if test "$gt_cv_func_dgettext_libc" = "yes" \ + && test "$gt_cv_func_ngettext_libc" = "yes"; then + gt_cv_func_dgettext_libintl=no + fi + fi + fi + fi -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -# find the maximum length of command line arguments -{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" + if test "$gt_cv_func_dgettext_libc" = "yes" \ + || test "$gt_cv_func_dgettext_libintl" = "yes"; then + gt_cv_have_gettext=yes + fi - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; + if test "$gt_cv_func_dgettext_libintl" = "yes"; then + INTLLIBS="-lintl $libintl_extra_libs" + fi - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; + if test "$gt_cv_have_gettext" = "yes"; then - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; +cat >>confdefs.h <<\_ACEOF +#define HAVE_GETTEXT 1 +_ACEOF - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; + # Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_MSGFMT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case "$MSGFMT" in + /*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then + ac_cv_path_MSGFMT="$ac_dir/$ac_word" + break + fi fi - ;; - esac - + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" + ;; +esac fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != "no"; then + { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } else - { $as_echo "$as_me:$LINENO: result: none" >&5 -$as_echo "none" >&6; } + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi + if test "$MSGFMT" != "no"; then + glib_save_LIBS="$LIBS" + LIBS="$LIBS $INTLLIBS" +for ac_func in dcgettext +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +#undef $ac_func -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - $as_echo_n "(cached) " >&6 +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] + eval "$as_ac_var=no" +fi -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' +fi +done -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + MSGFMT_OPTS= + { $as_echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 +$as_echo_n "checking if msgfmt accepts -c... " >&6; } + cat >conftest.foo <<_ACEOF -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +msgid "" +msgstr "" +"Content-Type: text/plain; charset=UTF-8\n" +"Project-Id-Version: test 1.0\n" +"PO-Revision-Date: 2007-02-15 12:01+0100\n" +"Last-Translator: test \n" +"Language-Team: C \n" +"MIME-Version: 1.0\n" +"Content-Transfer-Encoding: 8bit\n" -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux* | k*bsd*-gnu) - if test "$host_cpu" = ia64; then - symcode='[ABCDGIRSTW]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 +_ACEOF +if { ($as_echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 + ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:$LINENO: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:$LINENO: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if test "${lt_cv_objdir+set}" = set; then - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null + MSGFMT_OPTS=-c; { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +echo "$as_me: failed input was:" >&5 +sed 's/^/| /' conftest.foo >&5 fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then +if test "${ac_cv_path_GMSGFMT+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -6920,174 +6385,334 @@ done done IFS=$as_save_IFS + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:$LINENO: result: $AR" >&5 -$as_echo "$AR" >&6; } +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 + # Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then +if test "${ac_cv_path_XGETTEXT+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi + case "$XGETTEXT" in + /*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +extern int _nl_msg_cat_cntr; + return _nl_msg_cat_cntr + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac - AR=$ac_ct_AR - fi +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + CATOBJEXT=.gmo + DATADIRNAME=share else - AR="$ac_cv_prog_AR" -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then + case $host in + *-*-solaris*) + { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +$as_echo_n "checking for bind_textdomain_codeset... " >&6; } +if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. + For example, HP-UX 11i declares gettimeofday. */ +#define bind_textdomain_codeset innocuous_bind_textdomain_codeset -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char bind_textdomain_codeset (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS +#undef bind_textdomain_codeset -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char bind_textdomain_codeset (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset +choke me +#endif + +int +main () +{ +return bind_textdomain_codeset (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_bind_textdomain_codeset=yes else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_bind_textdomain_codeset=no fi - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } +if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then + CATOBJEXT=.gmo + DATADIRNAME=share else - RANLIB="$ac_cv_prog_RANLIB" + CATOBJEXT=.mo + DATADIRNAME=lib fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 + ;; + *) + CATOBJEXT=.mo + DATADIRNAME=lib + ;; + esac +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$glib_save_LIBS" + INSTOBJEXT=.mo + else + gt_cv_have_gettext=no + fi + fi + +fi + + + + if test "$gt_cv_have_gettext" = "yes" ; then + +cat >>confdefs.h <<\_ACEOF +#define ENABLE_NLS 1 +_ACEOF + + fi + + if test "$XGETTEXT" != ":"; then + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + { $as_echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 +$as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } + XGETTEXT=":" + fi + fi + + # We need to process the po/ directory. + POSUB=po + + ac_config_commands="$ac_config_commands default-1" + + + for lang in $ALL_LINGUAS; do + GMOFILES="$GMOFILES $lang.gmo" + POFILES="$POFILES $lang.po" + done + + + + + + + + + + + + + + if test "$gt_cv_have_gettext" = "yes"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + { $as_echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 +$as_echo_n "checking for catalogs to be installed... " >&6; } + NEW_LINGUAS= + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + NEW_LINGUAS="$NEW_LINGUAS $presentlang" + fi + done + LINGUAS=$NEW_LINGUAS + { $as_echo "$as_me:$LINENO: result: $LINGUAS" >&5 +$as_echo "$LINGUAS" >&6; } + fi + + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" + fi + + + test -d po || mkdir po + if test "x$srcdir" != "x."; then + if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then + posrcprefix="$srcdir/" + else + posrcprefix="../$srcdir/" + fi + else + posrcprefix="../" + fi + rm -f po/POTFILES + sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ + < $srcdir/po/POTFILES.in > po/POTFILES + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -7096,7 +6721,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" + ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -7106,10 +6731,10 @@ IFS=$as_save_IFS fi fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } @@ -7117,17 +6742,17 @@ fi fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -7136,7 +6761,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" + ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -7146,17 +6771,17 @@ IFS=$as_save_IFS fi fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_STRIP" = x; then - STRIP=":" + if test "x$ac_ct_CC" = x; then + CC="" else case $cross_compiling:$ac_tool_warned in yes:) @@ -7164,211 +6789,65 @@ yes:) $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - STRIP=$ac_ct_STRIP + CC=$ac_ct_CC fi else - STRIP="$ac_cv_prog_STRIP" + CC="$ac_cv_prog_CC" fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi fi - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:$LINENO: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DSYMUTIL+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else + ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do @@ -7376,7 +6855,11 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -7384,12 +6867,24 @@ done done IFS=$as_save_IFS +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi fi fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } @@ -7397,17 +6892,19 @@ fi fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -7416,7 +6913,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -7426,40 +6923,32 @@ IFS=$as_save_IFS fi fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_NMEDIT+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -7468,7 +6957,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -7478,57 +6967,21 @@ IFS=$as_save_IFS fi fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done + test -n "$ac_ct_CC" && break done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" + if test "x$ac_ct_CC" = x; then + CC="" else case $cross_compiling:$ac_tool_warned in yes:) @@ -7536,46 +6989,65 @@ yes:) $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - NMEDIT=$ac_ct_NMEDIT + CC=$ac_ct_CC fi -else - NMEDIT="$ac_cv_prog_NMEDIT" fi - - { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if test "${lt_cv_apple_cc_single_mod+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - echo "int foo(void){return 1;}" > conftest.c - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib ${wl}-single_module conftest.c - if test -f libconftest.dylib; then - lt_cv_apple_cc_single_mod=yes - rm -rf libconftest.dylib* - fi - rm conftest.c - fi fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + + +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -7585,20 +7057,23 @@ cat >>conftest.$ac_ext <<_ACEOF int main () { +#ifndef __GNUC__ + choke me +#endif ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -7607,7804 +7082,5169 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - lt_cv_ld_exported_symbols_list=yes + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - lt_cv_ld_exported_symbols_list=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - + ac_compiler_gnu=no fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[0123]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil="~$DSYMUTIL \$lib || :" - else - _lt_dsymutil= - fi - ;; - esac +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then - withval=$with_pic; pic_mode="$withval" +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes else - pic_mode=default + GCC= fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext +int +main () +{ -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# Allow CC to be a program name with arguments. -compiler=$CC +int +main () +{ + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi -lt_prog_compiler_no_builtin_flag= +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - $as_echo_n "(cached) " >&6 +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7759: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:7763: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:$LINENO: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac -lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; +depcc="$CC" am_compiler_list= - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; +{ $as_echo "$as_me:$LINENO: checking for library containing strerror" >&5 +$as_echo_n "checking for library containing strerror... " >&6; } +if test "${ac_cv_search_strerror+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strerror (); +int +main () +{ +return strerror (); + ; + return 0; +} +_ACEOF +for ac_lib in '' cposix; do + if test -z "$ac_lib"; then + ac_res="none required" else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic='-qnocommon' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_search_strerror=$ac_res +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +fi - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - esac - ;; - esac - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext + if test "${ac_cv_search_strerror+set}" = set; then + break +fi +done +if test "${ac_cv_search_strerror+set}" = set; then + : +else + ac_cv_search_strerror=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +$as_echo "$ac_cv_search_strerror" >&6; } +ac_res=$ac_cv_search_strerror +if test "$ac_res" != no; then + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; +fi - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; +int +main () +{ - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi + ac_cv_header_stdc=no +fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -$as_echo "$lt_prog_compiler_pic" >&6; } +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works+set}" = set; then - $as_echo_n "(cached) " >&6 +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8049: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:8053: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $rm conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no + ac_cv_header_stdc=no fi +rm -f conftest* fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works+set}" = set; then - $as_echo_n "(cached) " >&6 +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : else - lt_prog_compiler_static= + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8153: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:8157: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - runpath_var= - allow_undefined_flag= - enable_shared_with_static_runtimes=no - archive_cmds= - archive_expsym_cmds= - old_archive_From_new_cmds= - old_archive_from_expsyms_cmds= - export_dynamic_flag_spec= - whole_archive_flag_spec= - thread_safe_flag_spec= - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - link_all_deplibs=unknown - hardcode_automatic=no - module_cmds= - module_expsym_cmds= - always_export_symbols=no - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +macro_version='2.2.6' +macro_revision='1.3012' - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <&2 -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. -EOF - fi - ;; - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +ltmain="$ac_aux_dir/ltmain.sh" - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - link_all_deplibs=no - else - ld_shlibs=no - fi - ;; +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${ac_cv_path_SED+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + $as_unset ac_script || ac_script= + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + $ac_path_SED_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_SED=$SED +fi - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - archive_cmds='' - hardcode_direct=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi + +{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if test "${ac_cv_path_FGREP+set}" = set; then + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + $ac_path_FGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_FGREP=$FGREP +fi + fi fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +test -z "$GREP" && GREP=grep -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - freebsd1*) - ld_shlibs=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld='-rpath $libdir' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + +{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if test "${lt_cv_path_NM+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DUMPBIN+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - no_undefined_flag=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in "dumpbin -symbols" "link -dump -symbols" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; + test -n "$ac_ct_DUMPBIN" && break +done - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - *) - ld_shlibs=no - ;; - esac - fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -$as_echo "$archive_cmds_need_lc" >&6; } - ;; - esac +{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if test "${lt_cv_nm_interface+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:8325: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:8328: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:8331: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" fi - ;; -esac - -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" + rm -f conftest* +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`echo $lt_search_path_spec` +{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } fi -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown +# find the maximum length of command line arguments +{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi ;; - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi ;; esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +fi - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:$LINENO: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if test "${lt_cv_ld_reload_flag+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + reload_cmds='$LD$reload_flag -o $output$reload_objs' fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; +esac -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OBJDUMP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done +done +IFS=$as_save_IFS - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if test "${lt_cv_deplibs_check_method+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all ;; -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes +beos*) + lt_cv_deplibs_check_method=pass_all ;; -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so ;; -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' else - shlibpath_overrides_runpath=yes + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH +cegcc) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' ;; -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all ;; -rdos*) - dynamic_linker=no +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi ;; -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' +gnu*) + lt_cv_deplibs_check_method=pass_all ;; -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac ;; -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; esac + lt_cv_deplibs_check_method=pass_all ;; -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi - sys_lib_dlsearch_path_spec='/usr/lib' ;; -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all ;; -*) - dynamic_linker=no +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all ;; esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var" || \ - test "X$hardcode_automatic" = "Xyes" ; then - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -striplib= -old_striplib= -{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - ;; - *) - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AR+set}" = set; then $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dl_dlopen=yes + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS - ac_cv_lib_dl_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:$LINENO: result: $AR" >&5 +$as_echo "$AR" >&6; } else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS - ;; +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi - *) - { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 -$as_echo_n "checking for shl_load... " >&6; } -if test "${ac_cv_func_shl_load+set}" = set; then - $as_echo_n "(cached) " >&6 + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load + AR="$ac_cv_prog_AR" +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru -#ifdef __STDC__ -# include -#else -# include -#endif -#undef shl_load -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_shl_load || defined __stub___shl_load -choke me -#endif -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_shl_load=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_func_shl_load=no -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -$as_echo "$ac_cv_func_shl_load" >&6; } -if test "x$ac_cv_func_shl_load" = x""yes; then - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dld_shl_load=yes +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + - ac_cv_lib_dld_shl_load=no fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = x""yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 -$as_echo_n "checking for dlopen... " >&6; } -if test "${ac_cv_func_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen + STRIP="$ac_cv_prog_STRIP" +fi -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +test -z "$STRIP" && STRIP=: -#ifdef __STDC__ -# include -#else -# include -#endif -#undef dlopen -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_dlopen || defined __stub___dlopen -choke me -#endif -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_dlopen=yes + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS - ac_cv_func_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -$as_echo "$ac_cv_func_dlopen" >&6; } -if test "x$ac_cv_func_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } else - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dl_dlopen=yes + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS - ac_cv_lib_dl_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_svld_dlopen=yes + RANLIB=$ac_ct_RANLIB + fi else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_svld_dlopen=no + RANLIB="$ac_cv_prog_RANLIB" fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +test -z "$RANLIB" && RANLIB=: -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dld_dld_link=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_lib_dld_dld_link=no -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = x""yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi -fi +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -fi -fi -fi - ;; - esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif -#include -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif -#ifdef __cplusplus -extern "C" void exit (int); -#endif -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif -#include -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif -#ifdef __cplusplus -extern "C" void exit (int); -#endif -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi +# Allow CC to be a program name with arguments. +compiler=$CC -# Report which library types will actually be built -{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + $as_echo_n "(cached) " >&6 +else -{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } -test "$can_build_shared" = "no" && enable_shared=no +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' fi ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac -aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; esac -{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } -{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler \ - CC \ - LD \ - lt_prog_compiler_wl \ - lt_prog_compiler_pic \ - lt_prog_compiler_static \ - lt_prog_compiler_no_builtin_flag \ - export_dynamic_flag_spec \ - thread_safe_flag_spec \ - whole_archive_flag_spec \ - enable_shared_with_static_runtimes \ - old_archive_cmds \ - old_archive_from_new_cmds \ - predep_objects \ - postdep_objects \ - predeps \ - postdeps \ - compiler_lib_search_path \ - compiler_lib_search_dirs \ - archive_cmds \ - archive_expsym_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - old_archive_from_expsyms_cmds \ - allow_undefined_flag \ - no_undefined_flag \ - export_symbols_cmds \ - hardcode_libdir_flag_spec \ - hardcode_libdir_flag_spec_ld \ - hardcode_libdir_separator \ - hardcode_automatic \ - module_cmds \ - module_expsym_cmds \ - lt_cv_prog_compiler_c_o \ - fix_srcfile_path \ - exclude_expsyms \ - include_expsyms; do - - case $var in - old_archive_cmds | \ - old_archive_from_new_cmds | \ - archive_cmds | \ - archive_expsym_cmds | \ - module_cmds | \ - module_expsym_cmds | \ - old_archive_from_expsyms_cmds | \ - export_symbols_cmds | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac -cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - { $as_echo "$as_me:$LINENO: creating $ofile" >&5 -$as_echo "$as_me: creating $ofile" >&6;} - - cat <<__EOF__ >> "$cfgfile" -#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do -# The names of the tagged configurations supported by this script. -available_tags= + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" -# ### BEGIN LIBTOOL CONFIG + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + # Check to see that the pipe works correctly. + pipe_works=no -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi -# Whether or not to build static libraries. -build_old_libs=$enable_static + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + cat <<_LT_EOF >> conftest.$ac_ext -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* -# An echo program that does not interpret backslashes. -echo=$lt_echo + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS +fi -# A C compiler. -LTCC=$lt_LTCC +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:$LINENO: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:$LINENO: result: ok" >&5 +$as_echo "ok" >&6; } +fi -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS -# A language-specific compiler. -CC=$lt_compiler -# Is the compiler the GNU C compiler? -with_gcc=$GCC -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD -# Whether we need hard or soft links. -LN_S=$lt_LN_S -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' -# Executable file suffix (normally ""). -exeext="$exeext" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval=$enable_libtool_lock; +fi -# Must we lock files when doing compilation? -need_locks=$lt_need_locks +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 9536 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; -# Do we need a version for libraries? -need_version=$need_version +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; -# Whether dlopen is supported. -dlopen_support=$enable_dlopen +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if test "${lt_cv_cc_needs_belf+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static +int +main () +{ -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_cc_needs_belf=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + lt_cv_cc_needs_belf=no +fi -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec +need_locks="$enable_libtool_lock" -# Library versioning type. -version_type=$version_type -# Format of library name prefix. -libname_spec=$lt_libname_spec + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_LIPO+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi -# This is the shared library runtime path variable. -runpath_var=$runpath_var + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# This is the shared library path variable. -shlibpath_var=$shlibpath_var +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms -# ### END LIBTOOL CONFIG -__EOF__ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" + { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if test "${lt_cv_apple_cc_single_mod+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ -# Check whether --with-tags was given. -if test "${with_tags+set}" = set; then - withval=$with_tags; tagnames="$withval" -fi + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_ld_exported_symbols_list=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + lt_cv_ld_exported_symbols_list=no +fi -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 -$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} - fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 -$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else - { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 -$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" - fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in - "") ;; - *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 -$as_echo "$as_me: error: invalid tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac +for ac_header in dlfcn.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 -$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} - { (exit 1); exit 1; }; } - fi +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - - -archive_cmds_need_lc_CXX=no -allow_undefined_flag_CXX= -always_export_symbols_CXX=no -archive_expsym_cmds_CXX= -export_dynamic_flag_spec_CXX= -hardcode_direct_CXX=no -hardcode_libdir_flag_spec_CXX= -hardcode_libdir_flag_spec_ld_CXX= -hardcode_libdir_separator_CXX= -hardcode_minus_L_CXX=no -hardcode_shlibpath_var_CXX=unsupported -hardcode_automatic_CXX=no -module_cmds_CXX= -module_expsym_cmds_CXX= -link_all_deplibs_CXX=unknown -old_archive_cmds_CXX=$old_archive_cmds -no_undefined_flag_CXX= -whole_archive_flag_spec_CXX= -enable_shared_with_static_runtimes_CXX=no - -# Dependencies to place before and after the object being linked: -predep_objects_CXX= -postdep_objects_CXX= -predeps_CXX= -postdeps_CXX= -compiler_lib_search_path_CXX= -compiler_lib_search_dirs_CXX= - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -objext_CXX=$objext + eval "$as_ac_Header=no" +fi -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[]) { return(0); }' +fi -# ltmain only uses $CC for tagged configurations so make sure $CC is set. +done -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC +# Set options -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* + enable_dlopen=no -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - $as_unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - $as_unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -compiler_CXX=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + enable_win32_dll=no -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else - lt_prog_compiler_no_builtin_flag_CXX= + enable_shared=yes fi -if test "$GXX" = yes; then - # Set up default GNU C++ configuration -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi done - test -z "$LD" && LD="$ac_prog" + IFS="$lt_save_ifs" ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_CXX= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then + withval=$with_pic; pic_mode="$withval" else - GXX=no - with_gnu_ld=no - wlarc= + pic_mode=default fi -# PORTME: fill in a description of your system's C++ link characteristics -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -ld_shlibs_CXX=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi +test -z "$pic_mode" && pic_mode=default - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_CXX='' - hardcode_direct_CXX=yes - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_CXX=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_CXX=yes - hardcode_libdir_flag_spec_CXX='-L$libdir' - hardcode_libdir_separator_CXX= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX='$convenience' - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_CXX=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_CXX=no - fi - ;; +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_CXX=no - fi - ;; - darwin* | rhapsody*) - archive_cmds_need_lc_CXX=no - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - whole_archive_flag_spec_CXX='' - link_all_deplibs_CXX=yes - allow_undefined_flag_CXX="$_lt_dar_allow_undefined" - if test "$GXX" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_CXX=no - ;; - esac - fi - ;; - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - ld_shlibs_CXX=no - ;; - freebsd-elf*) - archive_cmds_need_lc_CXX=no - ;; - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - ld_shlibs_CXX=yes - ;; - gnu*) - ;; - hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - case $host_cpu in - hppa*64*|ia64*) ;; - *) - export_dynamic_flag_spec_CXX='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - ;; - *) - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - interix[3-9]*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - link_all_deplibs_CXX=yes - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - m88k*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - else - ld_shlibs_CXX=no - fi - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - archive_cmds_need_lc_CXX=yes - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_shlibpath_var_CXX=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' - ;; - esac - link_all_deplibs_CXX=yes - output_verbose_link_cmd='echo' - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - # The C++ compiler must be used to create the archive. - old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_CXX='${wl}-z,text' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - # So that behaviour is only enabled if SCOABSPATH is set to a - # non-empty value in the environment. Most likely only useful for - # creating official distributions of packages. - # This is a hack until libtool officially supports absolute path - # names for shared libraries. - no_undefined_flag_CXX='${wl}-z,text' - allow_undefined_flag_CXX='${wl}-z,nodefs' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - export_dynamic_flag_spec_CXX='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no -GCC_CXX="$GXX" -LD_CXX="$LD" -cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` - - for p in `eval $output_verbose_link_cmd`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" - else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" - else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" - else - predep_objects_CXX="$predep_objects_CXX $p" - fi - else - if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" - else - postdep_objects_CXX="$postdep_objects_CXX $p" - fi - fi - ;; - *) ;; # Ignore the rest. +test -z "$LN_S" && LN_S="ln -s" - esac - done - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling CXX test program" -fi -$rm -f confest.$objext -compiler_lib_search_dirs_CXX= -if test -n "$compiler_lib_search_path_CXX"; then - compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -# PORTME: override above test on systems where it is broken -case $host_os in -interix[3-9]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - predep_objects_CXX= - postdep_objects_CXX= - postdeps_CXX= - ;; -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - # - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -case " $postdeps_CXX " in -*" -lc "*) archive_cmds_need_lc_CXX=no ;; -esac -lt_prog_compiler_wl_CXX= -lt_prog_compiler_pic_CXX= -lt_prog_compiler_static_CXX= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_CXX='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - else - case $host_os in - aix[4-9]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - else - lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_CXX='-qnocommon' - lt_prog_compiler_wl_CXX='-Wl,' - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - lt_prog_compiler_pic_CXX='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - aCC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_CXX='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - lt_prog_compiler_wl_CXX='--backend -Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - ;; - icpc* | ecpc*) - # Intel C++ - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler. - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-fpic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - lt_prog_compiler_pic_CXX='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - lt_prog_compiler_wl_CXX='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - lt_prog_compiler_pic_CXX='-pic' - ;; - cxx*) - # Digital/Compaq C++ - lt_prog_compiler_wl_CXX='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - lt_prog_compiler_pic_CXX='-pic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - lcc*) - # Lucid - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - lt_prog_compiler_pic_CXX='-KPIC' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - esac - ;; - vxworks*) - ;; - *) - lt_prog_compiler_can_build_shared_CXX=no - ;; - esac - fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 -$as_echo "$lt_prog_compiler_pic_CXX" >&6; } - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_CXX"; then +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then +{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if test "${lt_cv_objdir+set}" = set; then $as_echo_n "(cached) " >&6 else - lt_cv_prog_compiler_pic_works_CXX=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13075: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:13079: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_CXX=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then - case $lt_prog_compiler_pic_CXX in - "" | " "*) ;; - *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; - esac + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs else - lt_prog_compiler_pic_CXX= - lt_prog_compiler_can_build_shared_CXX=no + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs fi - +rmdir .libs 2>/dev/null fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_CXX= - ;; - *) - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; -esac +{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_CXX=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_CXX=yes - fi - else - lt_cv_prog_compiler_static_works_CXX=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } -if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then - : -else - lt_prog_compiler_static_CXX= -fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13179: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:13183: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix[4-9]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" - ;; - cygwin* | mingw*) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - ;; - linux* | k*bsd*-gnu) - link_all_deplibs_CXX=no - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_CXX" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_CXX=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_CXX in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - pic_flag=$lt_prog_compiler_pic_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_CXX=no - else - archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 -$as_echo "$archive_cmds_need_lc_CXX" >&6; } - ;; - esac - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi ;; +esac -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; +# Global variables: +ofile=libtool +can_build_shared=yes -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; +with_gnu_ld="$lt_cv_prog_gnu_ld" -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +old_CC="$CC" +old_CFLAGS="$CFLAGS" -freebsd1*) - dynamic_linker=no - ;; +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; esac - ;; +done +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" ;; +esac +fi -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:$LINENO: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" ;; +esac +fi -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac else - shlibpath_overrides_runpath=yes + MAGIC_CMD=: fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; +fi -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no fi - need_version=yes ;; +esac -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; +# Use C for the default configuration in the libtool script -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +# Source file extension for C test sources. +ac_ext=c -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +# Object file extension for compiled C test sources. +objext=o +objext=$objext -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" -fi +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_CXX= -if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var_CXX" || \ - test "X$hardcode_automatic_CXX" = "Xyes" ; then - # We can hardcode non-existant directories. - if test "$hardcode_direct_CXX" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_CXX=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_CXX=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_CXX=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 -$as_echo "$hardcode_action_CXX" >&6; } -if test "$hardcode_action_CXX" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_CXX \ - CC_CXX \ - LD_CXX \ - lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ - lt_prog_compiler_static_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ - export_dynamic_flag_spec_CXX \ - thread_safe_flag_spec_CXX \ - whole_archive_flag_spec_CXX \ - enable_shared_with_static_runtimes_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - predep_objects_CXX \ - postdep_objects_CXX \ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX \ - compiler_lib_search_dirs_CXX \ - archive_cmds_CXX \ - archive_expsym_cmds_CXX \ - postinstall_cmds_CXX \ - postuninstall_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - export_symbols_cmds_CXX \ - hardcode_libdir_flag_spec_CXX \ - hardcode_libdir_flag_spec_ld_CXX \ - hardcode_libdir_separator_CXX \ - hardcode_automatic_CXX \ - module_cmds_CXX \ - module_expsym_cmds_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - fix_srcfile_path_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX; do - - case $var in - old_archive_cmds_CXX | \ - old_archive_from_new_cmds_CXX | \ - archive_cmds_CXX | \ - archive_expsym_cmds_CXX | \ - module_cmds_CXX | \ - module_expsym_cmds_CXX | \ - old_archive_from_expsyms_cmds_CXX | \ - export_symbols_cmds_CXX | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -cfgfile="$ofile" +# Allow CC to be a program name with arguments. +compiler=$CC - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static +if test -n "$compiler"; then -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_CXX +lt_prog_compiler_no_builtin_flag= -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install + { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:10901: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:10905: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi -# An echo program that does not interpret backslashes. -echo=$lt_echo +fi -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS -# A language-specific compiler. -CC=$lt_compiler_CXX -# Is the compiler the GNU C compiler? -with_gcc=$GCC_CXX -# An ERE matcher. -EGREP=$lt_EGREP + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= -# The linker used to build libraries. -LD=$lt_LD_CXX +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -# Whether we need hard or soft links. -LN_S=$lt_LN_S + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' -# A BSD-compatible nm program. -NM=$lt_NM + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; -# A symbol stripping program -STRIP=$lt_STRIP + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; -# Used on cygwin: assembler. -AS="$AS" + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; -# The name of the directory that contains temporary libtool files. -objdir=$objdir + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_CXX + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; -# Object file suffix (normally "o"). -objext="$ac_objext" + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; -# Old archive suffix (normally "a"). -libext="$libext" + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; -# Executable file suffix (normally ""). -exeext="$exeext" + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX -pic_mode=$pic_mode + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len + linux* | k*bsd*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + esac + ;; + esac + ;; -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -# Must we lock files when doing compilation? -need_locks=$lt_need_locks + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; -# Do we need a version for libraries? -need_version=$need_version + rdos*) + lt_prog_compiler_static='-non_shared' + ;; -# Whether dlopen is supported. -dlopen_support=$enable_dlopen + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_CXX + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi -# Library versioning type. -version_type=$version_type +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } -# Format of library name prefix. -libname_spec=$lt_libname_spec -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_CXX -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:11240: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:11244: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_CXX -archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_CXX -module_expsym_cmds=$lt_module_expsym_cmds_CXX +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib +fi -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_CXX -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_CXX -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_CXX -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_CXX -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_CXX +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_CXX -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_CXX -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# This is the shared library runtime path variable. -runpath_var=$runpath_var + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:11345: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:11349: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# This is the shared library path variable. -shlibpath_var=$shlibpath_var +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_CXX -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_CXX + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:11400: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:11404: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_CXX +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_CXX -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_CXX - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_CXX - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_CXX - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_CXX - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_CXX - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn fi +else + need_locks=no fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld - - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu - - -archive_cmds_need_lc_F77=no -allow_undefined_flag_F77= -always_export_symbols_F77=no -archive_expsym_cmds_F77= -export_dynamic_flag_spec_F77= -hardcode_direct_F77=no -hardcode_libdir_flag_spec_F77= -hardcode_libdir_flag_spec_ld_F77= -hardcode_libdir_separator_F77= -hardcode_minus_L_F77=no -hardcode_automatic_F77=no -module_cmds_F77= -module_expsym_cmds_F77= -link_all_deplibs_F77=unknown -old_archive_cmds_F77=$old_archive_cmds -no_undefined_flag_F77= -whole_archive_flag_spec_F77= -enable_shared_with_static_runtimes_F77=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -objext_F77=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="\ - subroutine t - return - end -" - -# Code to be used in simple link tests -lt_simple_link_test_code="\ - program t - end -" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${F77-"f77"} -compiler=$CC -compiler_F77=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu) + link_all_deplibs=no + ;; esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - -{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - -{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } -GCC_F77="$G77" -LD_F77="$LD" + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' -lt_prog_compiler_wl_F77= -lt_prog_compiler_pic_F77= -lt_prog_compiler_static_F77= + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 - if test "$GCC" = yes; then - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_static_F77='-static' +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' +_LT_EOF fi ;; amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi ;; - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_F77='-fno-common' + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi ;; interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_F77=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_F77=-Kconform_pic - fi + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='-fPIC' - ;; - esac - ;; + gnu* | linux* | tpf* | k*bsd*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - *) - lt_prog_compiler_pic_F77='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_F77='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac else - lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' + ld_shlibs=no fi ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_F77='-qnocommon' - lt_prog_compiler_wl_F77='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_F77='${wl}-a ${wl}archive' + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi ;; - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_F77='-non_shared' - ;; + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 - newsos6) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-fpic' - lt_prog_compiler_static_F77='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_F77='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - lt_prog_compiler_wl_F77='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - lt_prog_compiler_wl_F77='' - ;; - esac - ;; - esac +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi ;; - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_F77='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 - rdos*) - lt_prog_compiler_static_F77='-non_shared' - ;; +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. - solaris*) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_F77='-Qoption ld ';; - *) - lt_prog_compiler_wl_F77='-Wl,';; +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; esac ;; sunos4*) - lt_prog_compiler_wl_F77='-Qoption ld ' - lt_prog_compiler_pic_F77='-PIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no ;; - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_F77='-Kconform_pic' - lt_prog_compiler_static_F77='-Bstatic' + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no fi ;; + esac - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi ;; - unicos*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_can_build_shared_F77=no - ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no - uts4*) - lt_prog_compiler_pic_F77='-pic' - lt_prog_compiler_static_F77='-Bstatic' - ;; + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac - *) - lt_prog_compiler_can_build_shared_F77=no - ;; - esac - fi + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 -$as_echo "$lt_prog_compiler_pic_F77" >&6; } + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_F77"; then + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works_F77=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_F77" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:14777: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:14781: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_F77=yes - fi - fi - $rm conftest* + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + link_all_deplibs=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; } + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then - case $lt_prog_compiler_pic_F77 in - "" | " "*) ;; - *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; - esac -else - lt_prog_compiler_pic_F77= - lt_prog_compiler_can_build_shared_F77=no -fi +int +main () +{ -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_F77= - ;; - *) - lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" - ;; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then - $as_echo_n "(cached) " >&6 +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi else - lt_cv_prog_compiler_static_works_F77=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_F77=yes - fi - else - lt_cv_prog_compiler_static_works_F77=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; } -if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then - : -else - lt_prog_compiler_static_F77= fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_F77=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +int +main () +{ - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:14881: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:14885: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_F77=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - runpath_var= - allow_undefined_flag_F77= - enable_shared_with_static_runtimes_F77=no - archive_cmds_F77= - archive_expsym_cmds_F77= - old_archive_From_new_cmds_F77= - old_archive_from_expsyms_cmds_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - thread_safe_flag_spec_F77= - hardcode_libdir_flag_spec_F77= - hardcode_libdir_flag_spec_ld_F77= - hardcode_libdir_separator_F77= - hardcode_direct_F77=no - hardcode_minus_L_F77=no - hardcode_shlibpath_var_F77=unsupported - link_all_deplibs_F77=unknown - hardcode_automatic_F77=no - module_cmds_F77= - module_expsym_cmds_F77= - always_export_symbols_F77=no - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_F77= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs_F77=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_F77='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_F77= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_F77=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi fi ;; amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_F77=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_F77=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_F77=no - fi + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_F77='-L$libdir' - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=no - enable_shared_with_static_runtimes_F77=yes - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_F77=no - fi + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic ;; - interix[3-9]*) - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + darwin* | rhapsody*) - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - link_all_deplibs_F77=no - else - ld_shlibs_F77=no - fi - ;; - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=echo + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_F77=no - cat <&2 + else + ld_shlibs=no + fi -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + ;; -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_F77=no - cat <<_LT_EOF 1>&2 + freebsd1*) + ld_shlibs=no + ;; -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - esac + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no ;; - sunos4*) - archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else - ld_shlibs_F77=no + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi - ;; - esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes - if test "$ld_shlibs_F77" = no; then - runpath_var= - hardcode_libdir_flag_spec_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=yes - archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_F77=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_F77=unsupported - fi + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_F77='' - hardcode_direct_F77=yes - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_F77=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_F77=yes - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_libdir_separator_F77= - fi + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_F77=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_F77='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_F77="-z nodefs" - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; - end + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" @@ -15421,25 +12261,14 @@ $as_echo "$ac_try_echo") >&5 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || + test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 @@ -15450,414 +12279,212 @@ fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_F77=' ${wl}-bernotok' - allow_undefined_flag_F77=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_F77='$convenience' - archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes ;; - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_F77=no - ;; - - bsdi[45]*) - export_dynamic_flag_spec_F77=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_F77=' ' - allow_undefined_flag_F77=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_F77='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_F77='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_F77=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_F77=no - hardcode_direct_F77=no - hardcode_automatic_F77=yes - hardcode_shlibpath_var_F77=unsupported - whole_archive_flag_spec_F77='' - link_all_deplibs_F77=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_F77=no - ;; - esac - fi - ;; - - dgux*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no ;; - freebsd1*) - ld_shlibs_F77=no + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no + *nto* | *qnx*) ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; - hpux9*) + osf3*) if test "$GCC" = yes; then - archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: ;; - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else - archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_F77='+b $libdir' - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - ;; - *) - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - link_all_deplibs_F77=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - newsos6) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_shlibpath_var_F77=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - ;; - *) - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs_F77=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - allow_undefined_flag_F77=unsupported - archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_F77='-rpath $libdir' + hardcode_libdir_flag_spec='-rpath $libdir' fi - hardcode_libdir_separator_F77=: + archive_cmds_need_lc='no' + hardcode_libdir_separator=: ;; solaris*) - no_undefined_flag_F77=' -z text' + no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else - wlarc='' - archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) + # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then - whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else - whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac - link_all_deplibs_F77=yes + link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes # is this really true??? + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. - archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_F77='$CC -r -o $output$reload_objs' - hardcode_direct_F77=no + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no ;; motorola) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_F77=no + hardcode_shlibpath_var=no ;; sysv4.3*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - export_dynamic_flag_spec_F77='-Bexport' + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes - ld_shlibs_F77=yes + ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_F77='${wl}-z,text' - archive_cmds_need_lc_F77=no - hardcode_shlibpath_var_F77=no + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -15868,51 +12495,75 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - no_undefined_flag_F77='${wl}-z,text' - allow_undefined_flag_F77='${wl}-z,nodefs' - archive_cmds_need_lc_F77=no - hardcode_shlibpath_var_F77=no - hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes - export_dynamic_flag_spec_F77='${wl}-Bexport' + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no ;; *) - ld_shlibs_F77=no + ld_shlibs=no ;; esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 -$as_echo "$ld_shlibs_F77" >&6; } -test "$ld_shlibs_F77" = no && can_build_shared=no +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + # # Do we need to explicitly link libc? # -case "x$archive_cmds_need_lc_F77" in +case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added - archive_cmds_need_lc_F77=yes + archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_F77 in + case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; @@ -15922,7 +12573,7 @@ x|xyes) # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* + $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 @@ -15934,3718 +12585,1929 @@ $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } lib=conftest libobjs=conftest.$ac_objext deplibs= - wl=$lt_prog_compiler_wl_F77 - pic_flag=$lt_prog_compiler_pic_F77 + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_F77 - allow_undefined_flag_F77= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then - archive_cmds_need_lc_F77=no + archive_cmds_need_lc=no else - archive_cmds_need_lc_F77=yes + archive_cmds_need_lc=yes fi - allow_undefined_flag_F77=$lt_save_allow_undefined_flag + allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 -$as_echo "$archive_cmds_need_lc_F77" >&6; } + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } ;; esac fi ;; esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; -rdos*) - dynamic_linker=no - ;; -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" -fi -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_F77= -if test -n "$hardcode_libdir_flag_spec_F77" || \ - test -n "$runpath_var_F77" || \ - test "X$hardcode_automatic_F77" = "Xyes" ; then - # We can hardcode non-existant directories. - if test "$hardcode_direct_F77" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && - test "$hardcode_minus_L_F77" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_F77=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_F77=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_F77=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 -$as_echo "$hardcode_action_F77" >&6; } -if test "$hardcode_action_F77" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_F77 \ - CC_F77 \ - LD_F77 \ - lt_prog_compiler_wl_F77 \ - lt_prog_compiler_pic_F77 \ - lt_prog_compiler_static_F77 \ - lt_prog_compiler_no_builtin_flag_F77 \ - export_dynamic_flag_spec_F77 \ - thread_safe_flag_spec_F77 \ - whole_archive_flag_spec_F77 \ - enable_shared_with_static_runtimes_F77 \ - old_archive_cmds_F77 \ - old_archive_from_new_cmds_F77 \ - predep_objects_F77 \ - postdep_objects_F77 \ - predeps_F77 \ - postdeps_F77 \ - compiler_lib_search_path_F77 \ - compiler_lib_search_dirs_F77 \ - archive_cmds_F77 \ - archive_expsym_cmds_F77 \ - postinstall_cmds_F77 \ - postuninstall_cmds_F77 \ - old_archive_from_expsyms_cmds_F77 \ - allow_undefined_flag_F77 \ - no_undefined_flag_F77 \ - export_symbols_cmds_F77 \ - hardcode_libdir_flag_spec_F77 \ - hardcode_libdir_flag_spec_ld_F77 \ - hardcode_libdir_separator_F77 \ - hardcode_automatic_F77 \ - module_cmds_F77 \ - module_expsym_cmds_F77 \ - lt_cv_prog_compiler_c_o_F77 \ - fix_srcfile_path_F77 \ - exclude_expsyms_F77 \ - include_expsyms_F77; do - - case $var in - old_archive_cmds_F77 | \ - old_archive_from_new_cmds_F77 | \ - archive_cmds_F77 | \ - archive_expsym_cmds_F77 | \ - module_cmds_F77 | \ - module_expsym_cmds_F77 | \ - old_archive_from_expsyms_cmds_F77 | \ - export_symbols_cmds_F77 | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac -cfgfile="$ofile" - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_F77 -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os -# An echo program that does not interpret backslashes. -echo=$lt_echo -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS -# A language-specific compiler. -CC=$lt_compiler_F77 -# Is the compiler the GNU C compiler? -with_gcc=$GCC_F77 -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD_F77 -# Whether we need hard or soft links. -LN_S=$lt_LN_S -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_F77 -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' -# Executable file suffix (normally ""). -exeext="$exeext" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_F77 -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 -# Must we lock files when doing compilation? -need_locks=$lt_need_locks -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix -# Do we need a version for libraries? -need_version=$need_version -# Whether dlopen is supported. -dlopen_support=$enable_dlopen -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_F77 -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 -# Library versioning type. -version_type=$version_type -# Format of library name prefix. -libname_spec=$lt_libname_spec -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_F77 -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_F77 -archive_expsym_cmds=$lt_archive_expsym_cmds_F77 -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_F77 -module_expsym_cmds=$lt_module_expsym_cmds_F77 - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_F77 - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_F77 - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_F77 - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_F77 - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_F77 -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -# This is the shared library runtime path variable. -runpath_var=$runpath_var -# This is the shared library path variable. -shlibpath_var=$shlibpath_var -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_F77 -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_F77 -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_F77 -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_F77 -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_F77 -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_F77 -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_F77 -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_F77 -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_F77 -# ### END LIBTOOL TAG CONFIG: $tagname -__EOF__ -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" - else - tagname="" - fi - ;; - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then -# Source file extension for Java test sources. -ac_ext=java -# Object file extension for compiled Java test sources. -objext=o -objext_GCJ=$objext -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -compiler_GCJ=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -# GCJ did not exist at the time GCC didn't implicitly link libc in. -archive_cmds_need_lc_GCJ=no -old_archive_cmds_GCJ=$old_archive_cmds -lt_prog_compiler_no_builtin_flag_GCJ= + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' - - -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:17109: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:17113: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else - : -fi - + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no -lt_prog_compiler_wl_GCJ= -lt_prog_compiler_pic_GCJ= -lt_prog_compiler_static_GCJ= +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH - if test "$GCC" = yes; then - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_static_GCJ='-static' + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no fi ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_GCJ='-fno-common' - ;; +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_GCJ=no - enable_shared=no - ;; +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_GCJ=-Kconform_pic - fi - ;; +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - ;; + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in - aix*) - lt_prog_compiler_wl_GCJ='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_GCJ='-qnocommon' - lt_prog_compiler_wl_GCJ='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - - newsos6) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-fpic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - lt_prog_compiler_wl_GCJ='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - lt_prog_compiler_wl_GCJ='' - ;; - esac - ;; - esac + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; + esac + ;; - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; - rdos*) - lt_prog_compiler_static_GCJ='-non_shared' - ;; +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - solaris*) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_GCJ='-Qoption ld ';; - *) - lt_prog_compiler_wl_GCJ='-Wl,';; - esac - ;; + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; - sunos4*) - lt_prog_compiler_wl_GCJ='-Qoption ld ' - lt_prog_compiler_pic_GCJ='-PIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +freebsd1*) + dynamic_linker=no + ;; - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_GCJ='-Kconform_pic' - lt_prog_compiler_static_GCJ='-Bstatic' - fi +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; - unicos*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_can_build_shared_GCJ=no - ;; +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; - uts4*) - lt_prog_compiler_pic_GCJ='-pic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; *) - lt_prog_compiler_can_build_shared_GCJ=no - ;; + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; esac - fi + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 -$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_GCJ"; then +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # Some binutils ld are patched to set DT_RUNPATH + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works_GCJ=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_GCJ" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:17399: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:17403: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_GCJ=yes - fi - fi - $rm conftest* +int +main () +{ + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; } -if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then - case $lt_prog_compiler_pic_GCJ in - "" | " "*) ;; - *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; - esac else - lt_prog_compiler_pic_GCJ= - lt_prog_compiler_can_build_shared_GCJ=no -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_GCJ= - ;; - *) - lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" - ;; -esac -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_GCJ=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_GCJ=yes - fi - else - lt_cv_prog_compiler_static_works_GCJ=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; } + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes -if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then - : -else - lt_prog_compiler_static_GCJ= -fi + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_GCJ=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:17503: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:17507: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_GCJ=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' fi -else - need_locks=no -fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; - runpath_var= - allow_undefined_flag_GCJ= - enable_shared_with_static_runtimes_GCJ=no - archive_cmds_GCJ= - archive_expsym_cmds_GCJ= - old_archive_From_new_cmds_GCJ= - old_archive_from_expsyms_cmds_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - thread_safe_flag_spec_GCJ= - hardcode_libdir_flag_spec_GCJ= - hardcode_libdir_flag_spec_ld_GCJ= - hardcode_libdir_separator_GCJ= - hardcode_direct_GCJ=no - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=unsupported - link_all_deplibs_GCJ=unknown - hardcode_automatic_GCJ=no - module_cmds_GCJ= - module_expsym_cmds_GCJ= - always_export_symbols_GCJ=no - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_GCJ= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; - ld_shlibs_GCJ=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_GCJ=no - cat <&2 +rdos*) + dynamic_linker=no + ;; -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; -EOF - fi - ;; +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_GCJ=no +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_GCJ=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_GCJ=no - fi + siemens) + need_lib_prefix=no ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_GCJ='-L$libdir' - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=no - enable_shared_with_static_runtimes_GCJ=yes - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_GCJ=no - fi + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; + esac + ;; - interix[3-9]*) - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - link_all_deplibs_GCJ=no - else - ld_shlibs_GCJ=no - fi - ;; +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_GCJ=no - cat <&2 +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_GCJ=no - cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - ;; - sunos4*) - archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - if test "$ld_shlibs_GCJ" = no; then - runpath_var= - hardcode_libdir_flag_spec_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=yes - archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_GCJ=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_GCJ=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - archive_cmds_GCJ='' - hardcode_direct_GCJ=yes - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_GCJ=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_GCJ=yes - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_libdir_separator_GCJ= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_GCJ=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_GCJ='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_GCJ=' ${wl}-bernotok' - allow_undefined_flag_GCJ=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_GCJ='$convenience' - archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_GCJ=no - ;; - bsdi[45]*) - export_dynamic_flag_spec_GCJ=-rdynamic - ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_GCJ=' ' - allow_undefined_flag_GCJ=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_GCJ='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_GCJ=yes - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_GCJ=no - hardcode_direct_GCJ=no - hardcode_automatic_GCJ=yes - hardcode_shlibpath_var_GCJ=unsupported - whole_archive_flag_spec_GCJ='' - link_all_deplibs_GCJ=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_GCJ=no - ;; - esac - fi - ;; - dgux*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - freebsd1*) - ld_shlibs_GCJ=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - hpux9*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - ;; - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - fi - ;; - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - ;; - *) - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - link_all_deplibs_GCJ=yes - ;; - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - newsos6) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_shlibpath_var_GCJ=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - ;; - *) - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs_GCJ=no - fi - ;; - os2*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - allow_undefined_flag_GCJ=unsupported - archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_GCJ='-rpath $libdir' - fi - hardcode_libdir_separator_GCJ=: - ;; - solaris*) - no_undefined_flag_GCJ=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_shlibpath_var_GCJ=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs_GCJ=yes - ;; - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - sysv4) - case $host_vendor in - sni) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_GCJ='$CC -r -o $output$reload_objs' - hardcode_direct_GCJ=no - ;; - motorola) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - sysv4.3*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='-Bexport' - ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_GCJ=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_GCJ='${wl}-z,text' - archive_cmds_need_lc_GCJ=no - hardcode_shlibpath_var_GCJ=no - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_GCJ='${wl}-z,text' - allow_undefined_flag_GCJ='${wl}-z,nodefs' - archive_cmds_need_lc_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - uts4*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - *) - ld_shlibs_GCJ=no - ;; - esac - fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 -$as_echo "$ld_shlibs_GCJ" >&6; } -test "$ld_shlibs_GCJ" = no && can_build_shared=no -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_GCJ" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_GCJ=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_GCJ in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_GCJ - pic_flag=$lt_prog_compiler_pic_GCJ - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ - allow_undefined_flag_GCJ= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_GCJ=no - else - archive_cmds_need_lc_GCJ=yes - fi - allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 -$as_echo "$archive_cmds_need_lc_GCJ" >&6; } - ;; - esac - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` + + + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; + ac_cv_lib_dl_dlopen=no +fi -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; +fi -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; + ;; -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; + *) + { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +$as_echo_n "checking for shl_load... " >&6; } +if test "${ac_cv_func_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; +#ifdef __STDC__ +# include +#else +# include +#endif -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; +#undef shl_load -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_shl_load || defined __stub___shl_load +choke me +#endif -*) - dynamic_linker=no - ;; +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_shl_load=yes else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + ac_cv_func_shl_load=no fi -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext fi - -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_GCJ= -if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var_GCJ" || \ - test "X$hardcode_automatic_GCJ" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_GCJ" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && - test "$hardcode_minus_L_GCJ" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_GCJ=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_GCJ=immediate - fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +$as_echo "$ac_cv_func_shl_load" >&6; } +if test "x$ac_cv_func_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_GCJ=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 -$as_echo "$hardcode_action_GCJ" >&6; } - -if test "$hardcode_action_GCJ" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - + { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_GCJ \ - CC_GCJ \ - LD_GCJ \ - lt_prog_compiler_wl_GCJ \ - lt_prog_compiler_pic_GCJ \ - lt_prog_compiler_static_GCJ \ - lt_prog_compiler_no_builtin_flag_GCJ \ - export_dynamic_flag_spec_GCJ \ - thread_safe_flag_spec_GCJ \ - whole_archive_flag_spec_GCJ \ - enable_shared_with_static_runtimes_GCJ \ - old_archive_cmds_GCJ \ - old_archive_from_new_cmds_GCJ \ - predep_objects_GCJ \ - postdep_objects_GCJ \ - predeps_GCJ \ - postdeps_GCJ \ - compiler_lib_search_path_GCJ \ - compiler_lib_search_dirs_GCJ \ - archive_cmds_GCJ \ - archive_expsym_cmds_GCJ \ - postinstall_cmds_GCJ \ - postuninstall_cmds_GCJ \ - old_archive_from_expsyms_cmds_GCJ \ - allow_undefined_flag_GCJ \ - no_undefined_flag_GCJ \ - export_symbols_cmds_GCJ \ - hardcode_libdir_flag_spec_GCJ \ - hardcode_libdir_flag_spec_ld_GCJ \ - hardcode_libdir_separator_GCJ \ - hardcode_automatic_GCJ \ - module_cmds_GCJ \ - module_expsym_cmds_GCJ \ - lt_cv_prog_compiler_c_o_GCJ \ - fix_srcfile_path_GCJ \ - exclude_expsyms_GCJ \ - include_expsyms_GCJ; do - - case $var in - old_archive_cmds_GCJ | \ - old_archive_from_new_cmds_GCJ | \ - archive_cmds_GCJ | \ - archive_expsym_cmds_GCJ | \ - module_cmds_GCJ | \ - module_expsym_cmds_GCJ | \ - old_archive_from_expsyms_cmds_GCJ | \ - export_symbols_cmds_GCJ | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_GCJ - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# An echo program that does not interpret backslashes. -echo=$lt_echo + ac_cv_lib_dld_shl_load=no +fi -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +$as_echo_n "checking for dlopen... " >&6; } +if test "${ac_cv_func_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen -# A C compiler. -LTCC=$lt_LTCC +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS +#ifdef __STDC__ +# include +#else +# include +#endif -# A language-specific compiler. -CC=$lt_compiler_GCJ +#undef dlopen -# Is the compiler the GNU C compiler? -with_gcc=$GCC_GCJ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_dlopen || defined __stub___dlopen +choke me +#endif -# An ERE matcher. -EGREP=$lt_EGREP +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# The linker used to build libraries. -LD=$lt_LD_GCJ + ac_cv_func_dlopen=no +fi -# Whether we need hard or soft links. -LN_S=$lt_LN_S +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +$as_echo "$ac_cv_func_dlopen" >&6; } +if test "x$ac_cv_func_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# A BSD-compatible nm program. -NM=$lt_NM +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# A symbol stripping program -STRIP=$lt_STRIP + ac_cv_lib_dl_dlopen=no +fi -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_svld_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" + ac_cv_lib_svld_dlopen=no +fi -# Used on cygwin: assembler. -AS="$AS" +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# The name of the directory that contains temporary libtool files. -objdir=$objdir +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_dld_link=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds + ac_cv_lib_dld_dld_link=no +fi -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_GCJ +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" +fi -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' -# Executable file suffix (normally ""). -exeext="$exeext" +fi -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_GCJ -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len +fi -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ -# Must we lock files when doing compilation? -need_locks=$lt_need_locks +fi -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix -# Do we need a version for libraries? -need_version=$need_version +fi -# Whether dlopen is supported. -dlopen_support=$enable_dlopen + ;; + esac -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_GCJ + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 14216 "configure" +#include "confdefs.h" -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ +#if HAVE_DLFCN_H +#include +#endif -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ +#include -# Library versioning type. -version_type=$version_type +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif -# Format of library name prefix. -libname_spec=$lt_libname_spec +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_GCJ -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_GCJ -archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self_static+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 14312 "configure" +#include "confdefs.h" -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_GCJ -module_expsym_cmds=$lt_module_expsym_cmds_GCJ +#if HAVE_DLFCN_H +#include +#endif -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_GCJ +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_GCJ +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_GCJ + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_GCJ + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_GCJ + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_GCJ -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -# This is the shared library runtime path variable. -runpath_var=$runpath_var -# This is the shared library path variable. -shlibpath_var=$shlibpath_var -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_GCJ -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_GCJ -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_GCJ -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ +striplib= +old_striplib= +{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_GCJ -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_GCJ -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_GCJ -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_GCJ -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_GCJ -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_GCJ -# ### END LIBTOOL TAG CONFIG: $tagname + # Report which library types will actually be built + { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } -__EOF__ + { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -19654,602 +14516,653 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" - else - tagname="" - fi - ;; - - RC) - -# Source file extension for RC test sources. -ac_ext=rc -# Object file extension for compiled RC test sources. -objext=o -objext_RC=$objext -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* + ac_config_commands="$ac_config_commands libtool" -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -compiler_RC=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - -lt_cv_prog_compiler_c_o_RC=yes - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_RC \ - CC_RC \ - LD_RC \ - lt_prog_compiler_wl_RC \ - lt_prog_compiler_pic_RC \ - lt_prog_compiler_static_RC \ - lt_prog_compiler_no_builtin_flag_RC \ - export_dynamic_flag_spec_RC \ - thread_safe_flag_spec_RC \ - whole_archive_flag_spec_RC \ - enable_shared_with_static_runtimes_RC \ - old_archive_cmds_RC \ - old_archive_from_new_cmds_RC \ - predep_objects_RC \ - postdep_objects_RC \ - predeps_RC \ - postdeps_RC \ - compiler_lib_search_path_RC \ - compiler_lib_search_dirs_RC \ - archive_cmds_RC \ - archive_expsym_cmds_RC \ - postinstall_cmds_RC \ - postuninstall_cmds_RC \ - old_archive_from_expsyms_cmds_RC \ - allow_undefined_flag_RC \ - no_undefined_flag_RC \ - export_symbols_cmds_RC \ - hardcode_libdir_flag_spec_RC \ - hardcode_libdir_flag_spec_ld_RC \ - hardcode_libdir_separator_RC \ - hardcode_automatic_RC \ - module_cmds_RC \ - module_expsym_cmds_RC \ - lt_cv_prog_compiler_c_o_RC \ - fix_srcfile_path_RC \ - exclude_expsyms_RC \ - include_expsyms_RC; do - - case $var in - old_archive_cmds_RC | \ - old_archive_from_new_cmds_RC | \ - archive_cmds_RC | \ - archive_expsym_cmds_RC | \ - module_cmds_RC | \ - module_expsym_cmds_RC | \ - old_archive_from_expsyms_cmds_RC | \ - export_symbols_cmds_RC | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac -cfgfile="$ofile" - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname +# Only expand once: -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL +for ac_prog in flex lex +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_LEX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LEX="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared +fi +fi +LEX=$ac_cv_prog_LEX +if test -n "$LEX"; then + { $as_echo "$as_me:$LINENO: result: $LEX" >&5 +$as_echo "$LEX" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_RC + test -n "$LEX" && break +done +test -n "$LEX" || LEX=":" -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC +if test "x$LEX" != "x:"; then + cat >conftest.l <<_ACEOF +%% +a { ECHO; } +b { REJECT; } +c { yymore (); } +d { yyless (1); } +e { yyless (input () != 0); } +f { unput (yytext[0]); } +. { BEGIN INITIAL; } +%% +#ifdef YYTEXT_POINTER +extern char *yytext; +#endif +int +main (void) +{ + return ! yylex () + ! yywrap (); +} +_ACEOF +{ (ac_try="$LEX conftest.l" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$LEX conftest.l") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ $as_echo "$as_me:$LINENO: checking lex output file root" >&5 +$as_echo_n "checking lex output file root... " >&6; } +if test "${ac_cv_prog_lex_root+set}" = set; then + $as_echo_n "(cached) " >&6 +else -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install +if test -f lex.yy.c; then + ac_cv_prog_lex_root=lex.yy +elif test -f lexyy.c; then + ac_cv_prog_lex_root=lexyy +else + { { $as_echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 +$as_echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} + { (exit 1); exit 1; }; } +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 +$as_echo "$ac_cv_prog_lex_root" >&6; } +LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os +if test -z "${LEXLIB+set}"; then + { $as_echo "$as_me:$LINENO: checking lex library" >&5 +$as_echo_n "checking lex library... " >&6; } +if test "${ac_cv_lib_lex+set}" = set; then + $as_echo_n "(cached) " >&6 +else -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os + ac_save_LIBS=$LIBS + ac_cv_lib_lex='none needed' + for ac_lib in '' -lfl -ll; do + LIBS="$ac_lib $ac_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +`cat $LEX_OUTPUT_ROOT.c` +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_lex=$ac_lib +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# An echo program that does not interpret backslashes. -echo=$lt_echo -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS +fi -# A C compiler. -LTCC=$lt_LTCC +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + test "$ac_cv_lib_lex" != 'none needed' && break + done + LIBS=$ac_save_LIBS -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5 +$as_echo "$ac_cv_lib_lex" >&6; } + test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex +fi -# A language-specific compiler. -CC=$lt_compiler_RC -# Is the compiler the GNU C compiler? -with_gcc=$GCC_RC +{ $as_echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 +$as_echo_n "checking whether yytext is a pointer... " >&6; } +if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # POSIX says lex can declare yytext either as a pointer or an array; the +# default is implementation-dependent. Figure out which it is, since +# not all implementations provide the %pointer and %array declarations. +ac_cv_prog_lex_yytext_pointer=no +ac_save_LIBS=$LIBS +LIBS="$LEXLIB $ac_save_LIBS" +cat >conftest.$ac_ext <<_ACEOF +#define YYTEXT_POINTER 1 +`cat $LEX_OUTPUT_ROOT.c` +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_prog_lex_yytext_pointer=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD_RC +fi -# Whether we need hard or soft links. -LN_S=$lt_LN_S +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_save_LIBS -# A BSD-compatible nm program. -NM=$lt_NM +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 +$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; } +if test $ac_cv_prog_lex_yytext_pointer = yes; then -# A symbol stripping program -STRIP=$lt_STRIP +cat >>confdefs.h <<\_ACEOF +#define YYTEXT_POINTER 1 +_ACEOF -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD +fi +rm -f conftest.l $LEX_OUTPUT_ROOT.c -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" +fi +if test "$LEX" = :; then + LEX=${am_missing_run}flex +fi +for ac_prog in 'bison -y' byacc +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_YACC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_YACC="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" +fi +fi +YACC=$ac_cv_prog_YACC +if test -n "$YACC"; then + { $as_echo "$as_me:$LINENO: result: $YACC" >&5 +$as_echo "$YACC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir + test -n "$YACC" && break +done +test -n "$YACC" || YACC="yacc" -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_RC +if test "x$CC" != xcc; then + { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 +$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 +$as_echo_n "checking whether cc understands -c and -o together... " >&6; } +fi +set dummy $CC; ac_cc=`$as_echo "$2" | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# Object file suffix (normally "o"). -objext="$ac_objext" +int +main () +{ -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_RC -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen + ; + return 0; +} +_ACEOF +# Make sure it works both with $CC and with simple cc. +# We do the test twice because some compilers refuse to overwrite an +# existing .o file with -o, though they will create one. +ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' +rm -f conftest2.* +if { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; +then + eval ac_cv_prog_cc_${ac_cc}_c_o=yes + if test "x$CC" != xcc; then + # Test first that cc exists at all. + if { ac_try='cc -c conftest.$ac_ext >&5' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' + rm -f conftest2.* + if { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; + then + # cc works too. + : + else + # cc exists but doesn't like -o. + eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi + fi + fi +else + eval ac_cv_prog_cc_${ac_cc}_c_o=no +fi +rm -f core conftest* -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self +fi +if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static +cat >>confdefs.h <<\_ACEOF +#define NO_MINUS_C_MINUS_O 1 +_ACEOF -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_RC +fi -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +if test "$am_t" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC -# Library versioning type. -version_type=$version_type -# Format of library name prefix. -libname_spec=$lt_libname_spec + # Check whether --enable-compile-warnings was given. +if test "${enable_compile_warnings+set}" = set; then + enableval=$enable_compile_warnings; +else + enable_compile_warnings="maximum" +fi -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec + warnCFLAGS= -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_RC -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds + common_flags="-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fasynchronous-unwind-tables" -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + case "$enable_compile_warnings" in + no) + try_compiler_flags="" + ;; + minimum) + try_compiler_flags="-Wall -Wformat -Wformat-security $common_flags" + ;; + yes) + try_compiler_flags="-Wall -Wformat -Wformat-security -Wmissing-prototypes $common_flags" + ;; + maximum|error) + try_compiler_flags="-Wall -Wformat -Wformat-security -Wmissing-prototypes -Wnested-externs -Wpointer-arith" + try_compiler_flags="$try_compiler_flags -Wextra -Wshadow -Wcast-align -Wwrite-strings -Waggregate-return" + try_compiler_flags="$try_compiler_flags -Wstrict-prototypes -Winline -Wredundant-decls -Wno-sign-compare" + try_compiler_flags="$try_compiler_flags $common_flags" + if test "$enable_compile_warnings" = "error" ; then + try_compiler_flags="$try_compiler_flags -Werror" + fi + ;; + *) + { { $as_echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 +$as_echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} + { (exit 1); exit 1; }; } + ;; + esac -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + COMPILER_FLAGS= + for option in $try_compiler_flags; do + { $as_echo "$as_me:$LINENO: checking whether compiler accepts $option" >&5 +$as_echo_n "checking whether compiler accepts $option... " >&6; } -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_RC -archive_expsym_cmds=$lt_archive_expsym_cmds_RC -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + ac_save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $option" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_RC -module_expsym_cmds=$lt_module_expsym_cmds_RC +int +main () +{ -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + has_option=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_RC + has_option=no +fi -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_RC +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + echo 'int x;' >conftest.c + $CC $CFLAGS -c conftest.c 2>conftest.err + ret=$? + if test $ret != 0 -o -s conftest.err -o $has_option = "no"; then + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + else + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + COMPILER_FLAGS="$COMPILER_FLAGS $option" + fi + CFLAGS="$ac_save_CFLAGS" + rm -f conftest* -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_RC + done + unset option + unset try_compiler_flags -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_RC + # Check whether --enable-iso-c was given. +if test "${enable_iso_c+set}" = set; then + enableval=$enable_iso_c; +else + enable_iso_c=no +fi -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_RC + { $as_echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 +$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } + complCFLAGS= + if test "x$enable_iso_c" != "xno"; then + if test "x$GCC" = "xyes"; then + case " $CFLAGS " in + *\ \ -ansi\ \ *) ;; + *) complCFLAGS="$complCFLAGS -ansi" ;; + esac + case " $CFLAGS " in + *\ \ -pedantic\ \ *) ;; + *) complCFLAGS="$complCFLAGS -pedantic" ;; + esac + fi + fi + { $as_echo "$as_me:$LINENO: result: $complCFLAGS" >&5 +$as_echo "$complCFLAGS" >&6; } -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method + WARN_CFLAGS="$COMPILER_FLAGS $complCFLAGS" -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_RC + COMPILER_FLAGS= + { $as_echo "$as_me:$LINENO: checking whether compiler accepts -Wno-redundant-decls" >&5 +$as_echo_n "checking whether compiler accepts -Wno-redundant-decls... " >&6; } -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_RC - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_RC - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_RC - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_RC - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_RC - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_RC - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_RC - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_RC - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_RC - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_RC - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_RC - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ + ac_save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -Wno-redundant-decls" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + has_option=yes else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - ;; - - *) - { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 -$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 -$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;} - { (exit 1); exit 1; }; } - fi -fi - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - - - - - - - - - - - - - - - - - + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 -$as_echo_n "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes + has_option=no fi - { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + echo 'int x;' >conftest.c + $CC $CFLAGS -c conftest.c 2>conftest.err + ret=$? + if test $ret != 0 -o -s conftest.err -o $has_option = "no"; then + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + else + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + COMPILER_FLAGS="$COMPILER_FLAGS -Wno-redundant-decls" + fi + CFLAGS="$ac_save_CFLAGS" + rm -f conftest* + WARN_PYTHON_CFLAGS=$COMPILER_FLAGS -case "$am__api_version" in - 1.01234) - { { $as_echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 -$as_echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} - { (exit 1); exit 1; }; } - ;; - *) - ;; -esac +GTK_REQUIRED="2.16.0" +DBUS_REQUIRED="0.60" +GCONF_REQUIRED="2.8" +LIBNOTIFY_REQUIRED="0.4" +GIO_UNIX_REQUIRED="0.0" +GIO_REQUIRED="0.0" -if test -n ""; then - { $as_echo "$as_me:$LINENO: checking for intltool >= " >&5 -$as_echo_n "checking for intltool >= ... " >&6; } - INTLTOOL_REQUIRED_VERSION_AS_INT=`echo | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` - INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` - INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` - { $as_echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 -$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - { { $as_echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool or later." >&5 -$as_echo "$as_me: error: Your intltool is too old. You need intltool or later." >&2;} - { (exit 1); exit 1; }; } -fi -# Extract the first word of "intltool-update", so it can be a program name with args. -set dummy intltool-update; ac_word=$2 +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then +if test "${ac_cv_path_PKG_CONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else - case $INTLTOOL_UPDATE in + case $PKG_CONFIG in [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -20259,7 +15172,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -20270,26 +15183,29 @@ IFS=$as_save_IFS ;; esac fi -INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE -if test -n "$INTLTOOL_UPDATE"; then - { $as_echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 -$as_echo "$INTLTOOL_UPDATE" >&6; } +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "intltool-merge", so it can be a program name with args. -set dummy intltool-merge; ac_word=$2 +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then +if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else - case $INTLTOOL_MERGE in + case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -20299,7 +15215,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -20310,269 +15226,674 @@ IFS=$as_save_IFS ;; esac fi -INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE -if test -n "$INTLTOOL_MERGE"; then - { $as_echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 -$as_echo "$INTLTOOL_MERGE" >&6; } +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - -# Extract the first word of "intltool-extract", so it can be a program name with args. -set dummy intltool-extract; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then - $as_echo_n "(cached) " >&6 + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi else - case $INTLTOOL_EXTRACT in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi - ;; -esac fi -INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT -if test -n "$INTLTOOL_EXTRACT"; then - { $as_echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 -$as_echo "$INTLTOOL_EXTRACT" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } -fi - + PKG_CONFIG="" + fi -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - { { $as_echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 -$as_echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} - { (exit 1); exit 1; }; } fi - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - - - - - - +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for GTK" >&5 +$as_echo_n "checking for GTK... " >&6; } +if test -n "$PKG_CONFIG"; then + if test -n "$GTK_CFLAGS"; then + pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= $GTK_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$GTK_LIBS"; then + pkg_cv_GTK_LIBS="$GTK_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= $GTK_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED"` + else + GTK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GTK_PKG_ERRORS" >&5 + { { $as_echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: +$GTK_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GTK_CFLAGS +and GTK_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&5 +$as_echo "$as_me: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: +$GTK_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GTK_CFLAGS +and GTK_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&2;} + { (exit 1); exit 1; }; } +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GTK_CFLAGS +and GTK_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GTK_CFLAGS +and GTK_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +else + GTK_CFLAGS=$pkg_cv_GTK_CFLAGS + GTK_LIBS=$pkg_cv_GTK_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for DBUS" >&5 +$as_echo_n "checking for DBUS... " >&6; } +if test -n "$PKG_CONFIG"; then + if test -n "$DBUS_CFLAGS"; then + pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-glib-1 >= $DBUS_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$DBUS_LIBS"; then + pkg_cv_DBUS_LIBS="$DBUS_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-glib-1 >= $DBUS_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "dbus-glib-1 >= $DBUS_REQUIRED"` + else + DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "dbus-glib-1 >= $DBUS_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs + echo "$DBUS_PKG_ERRORS" >&5 + { { $as_echo "$as_me:$LINENO: error: Package requirements (dbus-glib-1 >= $DBUS_REQUIRED) were not met: +$DBUS_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables DBUS_CFLAGS +and DBUS_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&5 +$as_echo "$as_me: error: Package requirements (dbus-glib-1 >= $DBUS_REQUIRED) were not met: +$DBUS_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables DBUS_CFLAGS +and DBUS_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&2;} + { (exit 1); exit 1; }; } +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables DBUS_CFLAGS +and DBUS_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables DBUS_CFLAGS +and DBUS_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +else + DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS + DBUS_LIBS=$pkg_cv_DBUS_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for GCONF" >&5 +$as_echo_n "checking for GCONF... " >&6; } +if test -n "$PKG_CONFIG"; then + if test -n "$GCONF_CFLAGS"; then + pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0 >= \$GCONF_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gconf-2.0 >= $GCONF_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0 >= $GCONF_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$GCONF_LIBS"; then + pkg_cv_GCONF_LIBS="$GCONF_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0 >= \$GCONF_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gconf-2.0 >= $GCONF_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0 >= $GCONF_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gconf-2.0 >= $GCONF_REQUIRED"` + else + GCONF_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gconf-2.0 >= $GCONF_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GCONF_PKG_ERRORS" >&5 + { { $as_echo "$as_me:$LINENO: error: Package requirements (gconf-2.0 >= $GCONF_REQUIRED) were not met: +$GCONF_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GCONF_CFLAGS +and GCONF_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&5 +$as_echo "$as_me: error: Package requirements (gconf-2.0 >= $GCONF_REQUIRED) were not met: +$GCONF_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GCONF_CFLAGS +and GCONF_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&2;} + { (exit 1); exit 1; }; } +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GCONF_CFLAGS +and GCONF_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GCONF_CFLAGS +and GCONF_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +else + GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS + GCONF_LIBS=$pkg_cv_GCONF_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for GIO_UNIX" >&5 +$as_echo_n "checking for GIO_UNIX... " >&6; } +if test -n "$PKG_CONFIG"; then + if test -n "$GIO_UNIX_CFLAGS"; then + pkg_cv_GIO_UNIX_CFLAGS="$GIO_UNIX_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-unix-2.0 >= \$GIO_UNIX_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GIO_UNIX_CFLAGS=`$PKG_CONFIG --cflags "gio-unix-2.0 >= $GIO_UNIX_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$GIO_UNIX_LIBS"; then + pkg_cv_GIO_UNIX_LIBS="$GIO_UNIX_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-unix-2.0 >= \$GIO_UNIX_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GIO_UNIX_LIBS=`$PKG_CONFIG --libs "gio-unix-2.0 >= $GIO_UNIX_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GIO_UNIX_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED"` + else + GIO_UNIX_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GIO_UNIX_PKG_ERRORS" >&5 + { { $as_echo "$as_me:$LINENO: error: Package requirements (gio-unix-2.0 >= $GIO_UNIX_REQUIRED) were not met: +$GIO_UNIX_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GIO_UNIX_CFLAGS +and GIO_UNIX_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&5 +$as_echo "$as_me: error: Package requirements (gio-unix-2.0 >= $GIO_UNIX_REQUIRED) were not met: +$GIO_UNIX_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GIO_UNIX_CFLAGS +and GIO_UNIX_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&2;} + { (exit 1); exit 1; }; } +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GIO_UNIX_CFLAGS +and GIO_UNIX_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GIO_UNIX_CFLAGS +and GIO_UNIX_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +else + GIO_UNIX_CFLAGS=$pkg_cv_GIO_UNIX_CFLAGS + GIO_UNIX_LIBS=$pkg_cv_GIO_UNIX_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for GIO" >&5 +$as_echo_n "checking for GIO... " >&6; } +if test -n "$PKG_CONFIG"; then + if test -n "$GIO_CFLAGS"; then + pkg_cv_GIO_CFLAGS="$GIO_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= \$GIO_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gio-2.0 >= $GIO_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GIO_CFLAGS=`$PKG_CONFIG --cflags "gio-2.0 >= $GIO_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$GIO_LIBS"; then + pkg_cv_GIO_LIBS="$GIO_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= \$GIO_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "gio-2.0 >= $GIO_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_GIO_LIBS=`$PKG_CONFIG --libs "gio-2.0 >= $GIO_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GIO_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gio-2.0 >= $GIO_REQUIRED"` + else + GIO_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gio-2.0 >= $GIO_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs + echo "$GIO_PKG_ERRORS" >&5 + { { $as_echo "$as_me:$LINENO: error: Package requirements (gio-2.0 >= $GIO_REQUIRED) were not met: +$GIO_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GIO_CFLAGS +and GIO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&5 +$as_echo "$as_me: error: Package requirements (gio-2.0 >= $GIO_REQUIRED) were not met: +$GIO_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GIO_CFLAGS +and GIO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" >&2;} + { (exit 1); exit 1; }; } +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GIO_CFLAGS +and GIO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GIO_CFLAGS +and GIO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +else + GIO_CFLAGS=$pkg_cv_GIO_CFLAGS + GIO_LIBS=$pkg_cv_GIO_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi + if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then + GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` + else + GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE + fi +# Check whether --with-gconf-source was given. +if test "${with_gconf_source+set}" = set; then + withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" +fi -# Check the gettext tools to make sure they are GNU -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_XGETTEXT+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $XGETTEXT in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + { $as_echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 +$as_echo "Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } + + if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then + GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' fi -done -done -IFS=$as_save_IFS - ;; -esac -fi -XGETTEXT=$ac_cv_path_XGETTEXT -if test -n "$XGETTEXT"; then - { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + +# Check whether --with-gconf-schema-file-dir was given. +if test "${with_gconf_schema_file_dir+set}" = set; then + withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" fi -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MSGMERGE+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $MSGMERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - ;; -esac + { $as_echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 +$as_echo "Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } + + # Check whether --enable-schemas-install was given. +if test "${enable_schemas_install+set}" = set; then + enableval=$enable_schemas_install; case ${enableval} in + yes|no) ;; + *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 +$as_echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} + { (exit 1); exit 1; }; } ;; + esac fi -MSGMERGE=$ac_cv_path_MSGMERGE -if test -n "$MSGMERGE"; then - { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } + + if test "$enable_schemas_install" != no; then + GCONF_SCHEMAS_INSTALL_TRUE= + GCONF_SCHEMAS_INSTALL_FALSE='#' else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + GCONF_SCHEMAS_INSTALL_TRUE='#' + GCONF_SCHEMAS_INSTALL_FALSE= fi -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 + +# Extract the first word of "gconftool-2", so it can be a program name with args. +set dummy gconftool-2; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MSGFMT+set}" = set; then +if test "${ac_cv_path_GCONFTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else - case $MSGFMT in + case $GCONFTOOL in [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -20582,7 +15903,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -20590,94 +15911,63 @@ done done IFS=$as_save_IFS + test -z "$ac_cv_path_GCONFTOOL" && ac_cv_path_GCONFTOOL="no" ;; esac fi -MSGFMT=$ac_cv_path_MSGFMT -if test -n "$MSGFMT"; then - { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } +GCONFTOOL=$ac_cv_path_GCONFTOOL +if test -n "$GCONFTOOL"; then + { $as_echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 +$as_echo "$GCONFTOOL" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -# Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_GMSGFMT+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac +if test "$GCONFTOOL" = "no"; then + { { $as_echo "$as_me:$LINENO: error: gconftool-2 not found" >&5 +$as_echo "$as_me: error: gconftool-2 not found" >&2;} + { (exit 1); exit 1; }; } fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } + +# Check whether --enable-debug was given. +if test "${enable_debug+set}" = set; then + enableval=$enable_debug; else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + enable_debug=no fi +if test x"$enable_debug" = x"yes"; then + +cat >>confdefs.h <<\_ACEOF +#define ENABLE_DEBUG 1 +_ACEOF -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 -$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} - { (exit 1); exit 1; }; } -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 -$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} - { (exit 1); exit 1; }; } fi -# Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 + +# Extract the first word of "krb5-config", so it can be a program name with args. +set dummy krb5-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then +if test "${ac_cv_path_KRB5_CONFIG+set}" = set; then $as_echo_n "(cached) " >&6 else - case $INTLTOOL_PERL in + case $KRB5_CONFIG in [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. + ac_cv_path_KRB5_CONFIG="$KRB5_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH +as_dummy="$PATH:/usr/kerberos/bin" +for as_dir in $as_dummy do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_KRB5_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -20685,80 +15975,67 @@ done done IFS=$as_save_IFS + test -z "$ac_cv_path_KRB5_CONFIG" && ac_cv_path_KRB5_CONFIG="none" ;; esac fi -INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL -if test -n "$INTLTOOL_PERL"; then - { $as_echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 -$as_echo "$INTLTOOL_PERL" >&6; } +KRB5_CONFIG=$ac_cv_path_KRB5_CONFIG +if test -n "$KRB5_CONFIG"; then + { $as_echo "$as_me:$LINENO: result: $KRB5_CONFIG" >&5 +$as_echo "$KRB5_CONFIG" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -if test -z "$INTLTOOL_PERL"; then - { { $as_echo "$as_me:$LINENO: error: perl not found" >&5 -$as_echo "$as_me: error: perl not found" >&2;} - { (exit 1); exit 1; }; } -fi -{ $as_echo "$as_me:$LINENO: checking for perl >= 5.8.1" >&5 -$as_echo_n "checking for perl >= 5.8.1... " >&6; } -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - { { $as_echo "$as_me:$LINENO: error: perl 5.8.1 is required for intltool" >&5 -$as_echo "$as_me: error: perl 5.8.1 is required for intltool" >&2;} - { (exit 1); exit 1; }; } -else - IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" - { $as_echo "$as_me:$LINENO: result: $IT_PERL_VERSION" >&5 -$as_echo "$IT_PERL_VERSION" >&6; } -fi -if test "x" != "xno-xml"; then - { $as_echo "$as_me:$LINENO: checking for XML::Parser" >&5 -$as_echo_n "checking for XML::Parser... " >&6; } - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - { $as_echo "$as_me:$LINENO: result: ok" >&5 -$as_echo "ok" >&6; } - else - { { $as_echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 -$as_echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} - { (exit 1); exit 1; }; } - fi -fi +if test "x$KRB5_CONFIG" != "xnone"; then + KRB5_LIBS="`${KRB5_CONFIG} --libs krb5`" + KRB5_CFLAGS="`${KRB5_CONFIG} --cflags krb5`" -# Substitute ALL_LINGUAS so we can use it in po/Makefile +fi + +savedCFLAGS="$CFLAGS" +CFLAGS="$KRB5_CFLAGS $CFLAGS" +savedLIBS="$LIBS" +LIBS="$KRB5_LIBS $LIBS" -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then - cat >conftest.$ac_ext <<_ACEOF +for ac_header in hx509_err.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -int -main () -{ -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr - ; - return 0; -} +$ac_includes_default +#include <$ac_header> _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -20767,241 +16044,181 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - DATADIRNAME=share + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - case $host in - *-*-solaris*) - { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 -$as_echo_n "checking for bind_textdomain_codeset... " >&6; } -if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. - For example, HP-UX 11i declares gettimeofday. */ -#define bind_textdomain_codeset innocuous_bind_textdomain_codeset - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char bind_textdomain_codeset (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef bind_textdomain_codeset - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char bind_textdomain_codeset (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset -choke me -#endif - -int -main () -{ -return bind_textdomain_codeset (); - ; - return 0; -} +#include <$ac_header> _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext }; then - ac_cv_func_bind_textdomain_codeset=yes + ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_func_bind_textdomain_codeset=no + ac_header_preproc=no fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 -$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } -if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then - DATADIRNAME=share -else - DATADIRNAME=lib -fi +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes ;; - *) - DATADIRNAME=lib + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ;; - esac +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF +fi - - - -for ac_prog in flex lex -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_LEX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$LEX"; then - ac_cv_prog_LEX="$LEX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LEX="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done done -IFS=$as_save_IFS -fi -fi -LEX=$ac_cv_prog_LEX -if test -n "$LEX"; then - { $as_echo "$as_me:$LINENO: result: $LEX" >&5 -$as_echo "$LEX" >&6; } +{ $as_echo "$as_me:$LINENO: checking for krb5_creds.ticket_flags" >&5 +$as_echo_n "checking for krb5_creds.ticket_flags... " >&6; } +if test "${ac_cv_member_krb5_creds_ticket_flags+set}" = set; then + $as_echo_n "(cached) " >&6 else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$LEX" && break -done -test -n "$LEX" || LEX=":" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include -if test "x$LEX" != "x:"; then - cat >conftest.l <<_ACEOF -%% -a { ECHO; } -b { REJECT; } -c { yymore (); } -d { yyless (1); } -e { yyless (input () != 0); } -f { unput (yytext[0]); } -. { BEGIN INITIAL; } -%% -#ifdef YYTEXT_POINTER -extern char *yytext; -#endif int -main (void) +main () { - return ! yylex () + ! yywrap (); +static krb5_creds ac_aggr; +if (ac_aggr.ticket_flags) +return 0; + ; + return 0; } _ACEOF -{ (ac_try="$LEX conftest.l" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$LEX conftest.l") 2>&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ $as_echo "$as_me:$LINENO: checking lex output file root" >&5 -$as_echo_n "checking lex output file root... " >&6; } -if test "${ac_cv_prog_lex_root+set}" = set; then - $as_echo_n "(cached) " >&6 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_ticket_flags=yes else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -if test -f lex.yy.c; then - ac_cv_prog_lex_root=lex.yy -elif test -f lexyy.c; then - ac_cv_prog_lex_root=lexyy -else - { { $as_echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 -$as_echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} - { (exit 1); exit 1; }; } -fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 -$as_echo "$ac_cv_prog_lex_root" >&6; } -LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include -if test -z "${LEXLIB+set}"; then - { $as_echo "$as_me:$LINENO: checking lex library" >&5 -$as_echo_n "checking lex library... " >&6; } -if test "${ac_cv_lib_lex+set}" = set; then - $as_echo_n "(cached) " >&6 -else - - ac_save_LIBS=$LIBS - ac_cv_lib_lex='none needed' - for ac_lib in '' -lfl -ll; do - LIBS="$ac_lib $ac_save_LIBS" - cat >conftest.$ac_ext <<_ACEOF -`cat $LEX_OUTPUT_ROOT.c` +int +main () +{ +static krb5_creds ac_aggr; +if (sizeof ac_aggr.ticket_flags) +return 0; + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -21010,56 +16227,63 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_lex=$ac_lib + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_ticket_flags=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - + ac_cv_member_krb5_creds_ticket_flags=no fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - test "$ac_cv_lib_lex" != 'none needed' && break - done - LIBS=$ac_save_LIBS - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5 -$as_echo "$ac_cv_lib_lex" >&6; } - test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_ticket_flags" >&5 +$as_echo "$ac_cv_member_krb5_creds_ticket_flags" >&6; } +if test "x$ac_cv_member_krb5_creds_ticket_flags" = x""yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_KRB5_CREDS_TICKET_FLAGS 1 +_ACEOF -{ $as_echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 -$as_echo_n "checking whether yytext is a pointer... " >&6; } -if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then +fi + +{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags.b.forwardable" >&5 +$as_echo_n "checking for krb5_creds.flags.b.forwardable... " >&6; } +if test "${ac_cv_member_krb5_creds_flags_b_forwardable+set}" = set; then $as_echo_n "(cached) " >&6 else - # POSIX says lex can declare yytext either as a pointer or an array; the -# default is implementation-dependent. Figure out which it is, since -# not all implementations provide the %pointer and %array declarations. -ac_cv_prog_lex_yytext_pointer=no -ac_save_LIBS=$LIBS -LIBS="$LEXLIB $ac_save_LIBS" -cat >conftest.$ac_ext <<_ACEOF -#define YYTEXT_POINTER 1 -`cat $LEX_OUTPUT_ROOT.c` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +int +main () +{ +static krb5_creds ac_aggr; +if (ac_aggr.flags.b.forwardable) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -21068,154 +16292,39 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_prog_lex_yytext_pointer=yes + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_flags_b_forwardable=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_save_LIBS - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 -$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; } -if test $ac_cv_prog_lex_yytext_pointer = yes; then - -cat >>confdefs.h <<\_ACEOF -#define YYTEXT_POINTER 1 -_ACEOF - -fi -rm -f conftest.l $LEX_OUTPUT_ROOT.c - -fi -if test "$LEX" = :; then - LEX=${am_missing_run}flex -fi -for ac_prog in 'bison -y' byacc -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_YACC+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$YACC"; then - ac_cv_prog_YACC="$YACC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_YACC="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -YACC=$ac_cv_prog_YACC -if test -n "$YACC"; then - { $as_echo "$as_me:$LINENO: result: $YACC" >&5 -$as_echo "$YACC" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$YACC" && break -done -test -n "$YACC" || YACC="yacc" - - - - - # Check whether --enable-compile-warnings was given. -if test "${enable_compile_warnings+set}" = set; then - enableval=$enable_compile_warnings; -else - enable_compile_warnings="maximum" -fi - - - warnCFLAGS= - - common_flags="-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fasynchronous-unwind-tables" - - case "$enable_compile_warnings" in - no) - try_compiler_flags="" - ;; - minimum) - try_compiler_flags="-Wall -Wformat -Wformat-security $common_flags" - ;; - yes) - try_compiler_flags="-Wall -Wformat -Wformat-security -Wmissing-prototypes $common_flags" - ;; - maximum|error) - try_compiler_flags="-Wall -Wformat -Wformat-security -Wmissing-prototypes -Wnested-externs -Wpointer-arith" - try_compiler_flags="$try_compiler_flags -Wextra -Wshadow -Wcast-align -Wwrite-strings -Waggregate-return" - try_compiler_flags="$try_compiler_flags -Wstrict-prototypes -Winline -Wredundant-decls -Wno-sign-compare" - try_compiler_flags="$try_compiler_flags $common_flags" - if test "$enable_compile_warnings" = "error" ; then - try_compiler_flags="$try_compiler_flags -Werror" - fi - ;; - *) - { { $as_echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 -$as_echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - COMPILER_FLAGS= - for option in $try_compiler_flags; do - { $as_echo "$as_me:$LINENO: checking whether compiler accepts $option" >&5 -$as_echo_n "checking whether compiler accepts $option... " >&6; } - - ac_save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $option" - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include int main () { - +static krb5_creds ac_aggr; +if (sizeof ac_aggr.flags.b.forwardable) +return 0; ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -21224,98 +16333,63 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - has_option=yes + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_flags_b_forwardable=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - has_option=no + ac_cv_member_krb5_creds_flags_b_forwardable=no fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - echo 'int x;' >conftest.c - $CC $CFLAGS -c conftest.c 2>conftest.err - ret=$? - if test $ret != 0 -o -s conftest.err -o $has_option = "no"; then - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - else - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - COMPILER_FLAGS="$COMPILER_FLAGS $option" - fi - CFLAGS="$ac_save_CFLAGS" - rm -f conftest* +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi - done - unset option - unset try_compiler_flags - - # Check whether --enable-iso-c was given. -if test "${enable_iso_c+set}" = set; then - enableval=$enable_iso_c; -else - enable_iso_c=no +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags_b_forwardable" >&5 +$as_echo "$ac_cv_member_krb5_creds_flags_b_forwardable" >&6; } +if test "x$ac_cv_member_krb5_creds_flags_b_forwardable" = x""yes; then - - { $as_echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 -$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } - complCFLAGS= - if test "x$enable_iso_c" != "xno"; then - if test "x$GCC" = "xyes"; then - case " $CFLAGS " in - *\ \ -ansi\ \ *) ;; - *) complCFLAGS="$complCFLAGS -ansi" ;; - esac - case " $CFLAGS " in - *\ \ -pedantic\ \ *) ;; - *) complCFLAGS="$complCFLAGS -pedantic" ;; - esac - fi - fi - { $as_echo "$as_me:$LINENO: result: $complCFLAGS" >&5 -$as_echo "$complCFLAGS" >&6; } - - WARN_CFLAGS="$COMPILER_FLAGS $complCFLAGS" +cat >>confdefs.h <<_ACEOF +#define HAVE_KRB5_CREDS_FLAGS_B_FORWARDABLE 1 +_ACEOF - COMPILER_FLAGS= - { $as_echo "$as_me:$LINENO: checking whether compiler accepts -Wno-redundant-decls" >&5 -$as_echo_n "checking whether compiler accepts -Wno-redundant-decls... " >&6; } +fi - ac_save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -Wno-redundant-decls" - cat >conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags.b.renewable" >&5 +$as_echo_n "checking for krb5_creds.flags.b.renewable... " >&6; } +if test "${ac_cv_member_krb5_creds_flags_b_renewable+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +#include int main () { - +static krb5_creds ac_aggr; +if (ac_aggr.flags.b.renewable) +return 0; ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -21324,67 +16398,29 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - has_option=yes + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_flags_b_renewable=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - has_option=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - echo 'int x;' >conftest.c - $CC $CFLAGS -c conftest.c 2>conftest.err - ret=$? - if test $ret != 0 -o -s conftest.err -o $has_option = "no"; then - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - else - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - COMPILER_FLAGS="$COMPILER_FLAGS -Wno-redundant-decls" - fi - CFLAGS="$ac_save_CFLAGS" - rm -f conftest* - - WARN_PYTHON_CFLAGS=$COMPILER_FLAGS - - - -ALL_LINGUAS="nb de" - - -for ac_header in locale.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#include + +int +main () +{ +static krb5_creds ac_aggr; +if (sizeof ac_aggr.flags.b.renewable) +return 0; + ; + return 0; +} _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" @@ -21404,137 +16440,103 @@ $as_echo "$ac_try_echo") >&5 test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then - ac_header_compiler=yes + ac_cv_member_krb5_creds_flags_b_renewable=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no + ac_cv_member_krb5_creds_flags_b_renewable=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } +fi -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags_b_renewable" >&5 +$as_echo "$ac_cv_member_krb5_creds_flags_b_renewable" >&6; } +if test "x$ac_cv_member_krb5_creds_flags_b_renewable" = x""yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_KRB5_CREDS_FLAGS_B_RENEWABLE 1 +_ACEOF + + +fi + +{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags.b.proxiable" >&5 +$as_echo_n "checking for krb5_creds.flags.b.proxiable... " >&6; } +if test "${ac_cv_member_krb5_creds_flags_b_proxiable+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include <$ac_header> +#include + +int +main () +{ +static krb5_creds ac_aggr; +if (ac_aggr.flags.b.proxiable) +return 0; + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || test ! -s conftest.err - }; then - ac_header_preproc=yes + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_flags_b_proxiable=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - if test $ac_cv_header_locale_h = yes; then - { $as_echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 -$as_echo_n "checking for LC_MESSAGES... " >&6; } -if test "${am_cv_val_LC_MESSAGES+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include +#include + int main () { -return LC_MESSAGES +static krb5_creds ac_aggr; +if (sizeof ac_aggr.flags.b.proxiable) +return 0; ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -21543,61 +16545,53 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - am_cv_val_LC_MESSAGES=yes + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_flags_b_proxiable=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - am_cv_val_LC_MESSAGES=no + ac_cv_member_krb5_creds_flags_b_proxiable=no fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 -$as_echo "$am_cv_val_LC_MESSAGES" >&6; } - if test $am_cv_val_LC_MESSAGES = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_LC_MESSAGES 1 -_ACEOF - - fi - fi - USE_NLS=yes +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags_b_proxiable" >&5 +$as_echo "$ac_cv_member_krb5_creds_flags_b_proxiable" >&6; } +if test "x$ac_cv_member_krb5_creds_flags_b_proxiable" = x""yes; then +cat >>confdefs.h <<_ACEOF +#define HAVE_KRB5_CREDS_FLAGS_B_PROXIABLE 1 +_ACEOF - gt_cv_have_gettext=no - CATOBJEXT=NONE - XGETTEXT=: - INTLLIBS= +fi - if test "${ac_cv_header_libintl_h+set}" = set; then - { $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 -$as_echo_n "checking for libintl.h... " >&6; } -if test "${ac_cv_header_libintl_h+set}" = set; then +{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags" >&5 +$as_echo_n "checking for krb5_creds.flags... " >&6; } +if test "${ac_cv_member_krb5_creds_flags+set}" = set; then $as_echo_n "(cached) " >&6 -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 -$as_echo "$ac_cv_header_libintl_h" >&6; } else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking libintl.h usability" >&5 -$as_echo_n "checking libintl.h usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -$ac_includes_default -#include +#include + +int +main () +{ +static krb5_creds ac_aggr; +if (ac_aggr.flags) +return 0; + ; + return 0; +} _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" @@ -21617,104 +16611,83 @@ $as_echo "$ac_try_echo") >&5 test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then - ac_header_compiler=yes + ac_cv_member_krb5_creds_flags=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking libintl.h presence" >&5 -$as_echo_n "checking libintl.h presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include +#include + +int +main () +{ +static krb5_creds ac_aggr; +if (sizeof ac_aggr.flags) +return 0; + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || test ! -s conftest.err - }; then - ac_header_preproc=yes + } && test -s conftest.$ac_objext; then + ac_cv_member_krb5_creds_flags=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no + ac_cv_member_krb5_creds_flags=no fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 -$as_echo_n "checking for libintl.h... " >&6; } -if test "${ac_cv_header_libintl_h+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_header_libintl_h=$ac_header_preproc +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 -$as_echo "$ac_cv_header_libintl_h" >&6; } +{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags" >&5 +$as_echo "$ac_cv_member_krb5_creds_flags" >&6; } +if test "x$ac_cv_member_krb5_creds_flags" = x""yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_KRB5_CREDS_FLAGS 1 +_ACEOF + fi -if test "x$ac_cv_header_libintl_h" = x""yes; then - gt_cv_func_dgettext_libintl="no" - libintl_extra_libs="" - # - # First check in libc - # - { $as_echo "$as_me:$LINENO: checking for ngettext in libc" >&5 -$as_echo_n "checking for ngettext in libc... " >&6; } -if test "${gt_cv_func_ngettext_libc+set}" = set; then + + + + +for ac_func in krb5_get_error_message krb5_get_renewed_creds \ + krb5_get_init_creds_opt_set_default_flags \ + krb5_cc_clear_mcred +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -21723,13 +16696,41 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func -#include +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif int main () { -return !ngettext ("","", 1) +return $ac_func (); ; return 0; } @@ -21755,26 +16756,39 @@ $as_echo "$ac_try_echo") >&5 test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then - gt_cv_func_ngettext_libc=yes + eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - gt_cv_func_ngettext_libc=no + eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF fi -{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 -$as_echo "$gt_cv_func_ngettext_libc" >&6; } +done - if test "$gt_cv_func_ngettext_libc" = "yes" ; then - { $as_echo "$as_me:$LINENO: checking for dgettext in libc" >&5 -$as_echo_n "checking for dgettext in libc... " >&6; } -if test "${gt_cv_func_dgettext_libc+set}" = set; then + +for ac_func in krb5_get_init_creds_opt_set_pkinit +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -21783,79 +16797,14 @@ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func -#include - -int -main () -{ -return !dgettext ("","") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - gt_cv_func_dgettext_libc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - gt_cv_func_dgettext_libc=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - -fi -{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 -$as_echo "$gt_cv_func_dgettext_libc" >&6; } - fi - - if test "$gt_cv_func_ngettext_libc" = "yes" ; then - -for ac_func in bind_textdomain_codeset -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ #ifdef __STDC__ # include @@ -21930,32 +16879,43 @@ as_val=`eval 'as_val=${'$as_ac_var'} cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF - + heimdal_pkinit=yes +else + heimdal_pkinit=no fi done - fi - - # - # If we don't have everything we want, check in libintl - # - if test "$gt_cv_func_dgettext_libc" != "yes" \ - || test "$gt_cv_func_ngettext_libc" != "yes" \ - || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then - { $as_echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 -$as_echo_n "checking for bindtextdomain in -lintl... " >&6; } -if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then +for ac_func in krb5_get_init_creds_opt_set_pa +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" -cat >conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -21963,11 +16923,18 @@ cat >>conftest.$ac_ext <<_ACEOF #ifdef __cplusplus extern "C" #endif -char bindtextdomain (); +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + int main () { -return bindtextdomain (); +return $ac_func (); ; return 0; } @@ -21993,60 +16960,57 @@ $as_echo "$ac_try_echo") >&5 test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then - ac_cv_lib_intl_bindtextdomain=yes + eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_lib_intl_bindtextdomain=no + eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 -$as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } -if test "x$ac_cv_lib_intl_bindtextdomain" = x""yes; then - { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 -$as_echo_n "checking for ngettext in -lintl... " >&6; } -if test "${ac_cv_lib_intl_ngettext+set}" = set; then - $as_echo_n "(cached) " >&6 +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + mit_pkinit=yes else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" + mit_pkinit=no +fi +done + +{ $as_echo "$as_me:$LINENO: checking if a krb5_principal->realm is a char*" >&5 +$as_echo_n "checking if a krb5_principal->realm is a char*... " >&6; } cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char ngettext (); +$ac_includes_default +#include +#include int -main () +main(int argc, char **argv) { -return ngettext (); - ; - return 0; + static krb5_principal foo; + return strlen(foo->realm); } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -22055,64 +17019,48 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_intl_ngettext=yes + } && test -s conftest.$ac_objext; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_KRB5_PRINCIPAL_REALM_AS_STRING 1 +_ACEOF + +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_lib_intl_ngettext=no + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 -$as_echo "$ac_cv_lib_intl_ngettext" >&6; } -if test "x$ac_cv_lib_intl_ngettext" = x""yes; then - { $as_echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 -$as_echo_n "checking for dgettext in -lintl... " >&6; } -if test "${ac_cv_lib_intl_dgettext+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:$LINENO: checking if a krb5_principal->realm is a krb5_data" >&5 +$as_echo_n "checking if a krb5_principal->realm is a krb5_data... " >&6; } cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dgettext (); +$ac_includes_default +#include int -main () +main(int argc, char **argv) { -return dgettext (); - ; - return 0; + static krb5_principal foo; + static krb5_data bar; + foo->realm = bar; + return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 @@ -22121,215 +17069,305 @@ $as_echo "$ac_try_echo") >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_intl_dgettext=yes + } && test -s conftest.$ac_objext; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_KRB5_PRINCIPAL_REALM_AS_DATA 1 +_ACEOF + +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_lib_intl_dgettext=no + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 -$as_echo "$ac_cv_lib_intl_dgettext" >&6; } -if test "x$ac_cv_lib_intl_dgettext" = x""yes; then - gt_cv_func_dgettext_libintl=yes -fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: checking whether to enable pkinit support" >&5 +$as_echo_n "checking whether to enable pkinit support... " >&6; } +# Check whether --enable-pkinit was given. +if test "${enable_pkinit+set}" = set; then + enableval=$enable_pkinit; +else + enable_pkinit=autodetect fi -fi +if test "x$heimdal_pkinit" = "xyes" -o \ + "x$mit_pkinit" = "xyes"; then + enable_pkinit=yes - if test "$gt_cv_func_dgettext_libintl" != "yes" ; then - { $as_echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 -$as_echo_n "checking if -liconv is needed to use gettext... " >&6; } - { $as_echo "$as_me:$LINENO: result: " >&5 -$as_echo "" >&6; } - { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 -$as_echo_n "checking for ngettext in -lintl... " >&6; } -if test "${ac_cv_lib_intl_ngettext+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl -liconv $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PKINIT 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char ngettext (); -int -main () -{ -return ngettext (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_intl_ngettext=yes +fi +{ $as_echo "$as_me:$LINENO: result: $enable_pkinit" >&5 +$as_echo "$enable_pkinit" >&6; } + if test "x$enable_pkinit" = "xyes"; then + ENABLE_PKINIT_TRUE= + ENABLE_PKINIT_FALSE='#' else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_intl_ngettext=no + ENABLE_PKINIT_TRUE='#' + ENABLE_PKINIT_FALSE= fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 -$as_echo "$ac_cv_lib_intl_ngettext" >&6; } -if test "x$ac_cv_lib_intl_ngettext" = x""yes; then - { $as_echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 -$as_echo_n "checking for dcgettext in -lintl... " >&6; } -if test "${ac_cv_lib_intl_dcgettext+set}" = set; then - $as_echo_n "(cached) " >&6 +CFLAGS="$savedCFLAGS" +LIBS="$savedLIBS" + + +{ $as_echo "$as_me:$LINENO: checking whether to enable NetworkManager support" >&5 +$as_echo_n "checking whether to enable NetworkManager support... " >&6; } +# Check whether --enable-network-manager was given. +if test "${enable_network_manager+set}" = set; then + enableval=$enable_network_manager; else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl -liconv $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ + enable_network_manager=autodetect +fi -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dcgettext (); -int -main () -{ -return dcgettext (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 +{ $as_echo "$as_me:$LINENO: result: $enable_network_manager" >&5 +$as_echo "$enable_network_manager" >&6; } + +if test "x$enable_network_manager" != "xno"; then + +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for NETWORK_MANAGER" >&5 +$as_echo_n "checking for NETWORK_MANAGER... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$NETWORK_MANAGER_CFLAGS"; then + pkg_cv_NETWORK_MANAGER_CFLAGS="$NETWORK_MANAGER_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnm_glib >= 0.5\"") >&5 + ($PKG_CONFIG --exists --print-errors "libnm_glib >= 0.5") 2>&5 ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_intl_dcgettext=yes + (exit $ac_status); }; then + pkg_cv_NETWORK_MANAGER_CFLAGS=`$PKG_CONFIG --cflags "libnm_glib >= 0.5" 2>/dev/null` else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_intl_dcgettext=no + pkg_failed=yes fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS + fi +else + pkg_failed=untried fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 -$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } -if test "x$ac_cv_lib_intl_dcgettext" = x""yes; then - gt_cv_func_dgettext_libintl=yes - libintl_extra_libs=-liconv +if test -n "$PKG_CONFIG"; then + if test -n "$NETWORK_MANAGER_LIBS"; then + pkg_cv_NETWORK_MANAGER_LIBS="$NETWORK_MANAGER_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnm_glib >= 0.5\"") >&5 + ($PKG_CONFIG --exists --print-errors "libnm_glib >= 0.5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_NETWORK_MANAGER_LIBS=`$PKG_CONFIG --libs "libnm_glib >= 0.5" 2>/dev/null` else - : + pkg_failed=yes fi - + fi else - : + pkg_failed=untried fi - fi - # - # If we found libintl, then check in it for bind_textdomain_codeset(); - # we'll prefer libc if neither have bind_textdomain_codeset(), - # and both have dgettext and ngettext - # - if test "$gt_cv_func_dgettext_libintl" = "yes" ; then - glib_save_LIBS="$LIBS" - LIBS="$LIBS -lintl $libintl_extra_libs" - unset ac_cv_func_bind_textdomain_codeset -for ac_func in bind_textdomain_codeset -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + NETWORK_MANAGER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnm_glib >= 0.5"` + else + NETWORK_MANAGER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnm_glib >= 0.5"` + fi + # Put the nasty error message in config.log where it belongs + echo "$NETWORK_MANAGER_PKG_ERRORS" >&5 -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + enable_network_manager=no +elif test $pkg_failed = untried; then + enable_network_manager=no +else + NETWORK_MANAGER_CFLAGS=$pkg_cv_NETWORK_MANAGER_CFLAGS + NETWORK_MANAGER_LIBS=$pkg_cv_NETWORK_MANAGER_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + enable_network_manager=yes +fi + + +fi + +if test "x$enable_network_manager" = "xyes"; then + +cat >>confdefs.h <<\_ACEOF +#define ENABLE_NETWORK_MANAGER 1 +_ACEOF + +fi + if test "x$enable_network_manager" = "xyes"; then + ENABLE_NETWORK_MANAGER_TRUE= + ENABLE_NETWORK_MANAGER_FALSE='#' +else + ENABLE_NETWORK_MANAGER_TRUE='#' + ENABLE_NETWORK_MANAGER_FALSE= +fi + + +LIBNOTIFY_CFLAGS= +LIBNOTIFY_LIBS= + +# Check whether --with-libnotify was given. +if test "${with_libnotify+set}" = set; then + withval=$with_libnotify; +else + with_libnotify=check +fi + + +if test "x$with_libnotify" = "xyes" -o "x$with_libnotify" = "xcheck"; then + +pkg_failed=no +{ $as_echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 +$as_echo_n "checking for LIBNOTIFY... " >&6; } + +if test -n "$PKG_CONFIG"; then + if test -n "$LIBNOTIFY_CFLAGS"; then + pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi +if test -n "$PKG_CONFIG"; then + if test -n "$LIBNOTIFY_LIBS"; then + pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" + else + if test -n "$PKG_CONFIG" && \ + { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 + ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` +else + pkg_failed=yes +fi + fi +else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` + else + LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBNOTIFY_PKG_ERRORS" >&5 + + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + + if test "x$with_libnotify" = "xcheck" ; then + with_libnotify=no + else + { { $as_echo "$as_me:$LINENO: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&5 +$as_echo "$as_me: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&2;} + { (exit 1); exit 1; }; } + fi + +elif test $pkg_failed = untried; then + + if test "x$with_libnotify" = "xcheck" ; then + with_libnotify=no + else + { { $as_echo "$as_me:$LINENO: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&5 +$as_echo "$as_me: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&2;} + { (exit 1); exit 1; }; } + fi + +else + LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS + LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + with_libnotify=yes +fi + if test "x$with_libnotify" = "xyes" ; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_LIBNOTIFY 1 +_ACEOF + + fi +fi + if test "x$with_libnotify" = "xyes"; then + HAVE_LIBNOTIFY_TRUE= + HAVE_LIBNOTIFY_FALSE='#' +else + HAVE_LIBNOTIFY_TRUE='#' + HAVE_LIBNOTIFY_FALSE= +fi + + + + + + + + +for ac_func in seteuid stpcpy mmap +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ #ifdef __STDC__ # include @@ -22408,74 +17446,8 @@ _ACEOF fi done - LIBS="$glib_save_LIBS" - - if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then - gt_cv_func_dgettext_libc=no - else - if test "$gt_cv_func_dgettext_libc" = "yes" \ - && test "$gt_cv_func_ngettext_libc" = "yes"; then - gt_cv_func_dgettext_libintl=no - fi - fi - fi - fi - - if test "$gt_cv_func_dgettext_libc" = "yes" \ - || test "$gt_cv_func_dgettext_libintl" = "yes"; then - gt_cv_have_gettext=yes - fi - - if test "$gt_cv_func_dgettext_libintl" = "yes"; then - INTLLIBS="-lintl $libintl_extra_libs" - fi - - if test "$gt_cv_have_gettext" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_GETTEXT 1 -_ACEOF - - # Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MSGFMT+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case "$MSGFMT" in - /*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then - ac_cv_path_MSGFMT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != "no"; then - { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "$MSGFMT" != "no"; then - glib_save_LIBS="$LIBS" - LIBS="$LIBS $INTLLIBS" -for ac_func in dcgettext +for ac_func in mlock do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 @@ -22575,184 +17547,169 @@ _ACEOF fi done - MSGFMT_OPTS= - { $as_echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 -$as_echo_n "checking if msgfmt accepts -c... " >&6; } - cat >conftest.foo <<_ACEOF - -msgid "" -msgstr "" -"Content-Type: text/plain; charset=UTF-8\n" -"Project-Id-Version: test 1.0\n" -"PO-Revision-Date: 2007-02-15 12:01+0100\n" -"Last-Translator: test \n" -"Language-Team: C \n" -"MIME-Version: 1.0\n" -"Content-Transfer-Encoding: 8bit\n" + if test "$ac_cv_func_mlock" = "no"; then -_ACEOF -if { ($as_echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 - ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - MSGFMT_OPTS=-c; { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -echo "$as_me: failed input was:" >&5 -sed 's/^/| /' conftest.foo >&5 -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_GMSGFMT+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH +for ac_header in sys/mman.h do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_XGETTEXT+set}" = set; then +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } else - case "$XGETTEXT" in - /*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no fi - cat >conftest.$ac_ext <<_ACEOF +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - -int -main () -{ -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr - ; - return 0; -} +#include <$ac_header> _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" +if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext }; then - CATOBJEXT=.gmo - DATADIRNAME=share + ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - case $host in - *-*-solaris*) - { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 -$as_echo_n "checking for bind_textdomain_codeset... " >&6; } -if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + if test "$ac_cv_header_sys_mman_h" = "yes"; then + # Add librt to LIBS: + +{ $as_echo "$as_me:$LINENO: checking for memlk in -lrt" >&5 +$as_echo_n "checking for memlk in -lrt... " >&6; } +if test "${ac_cv_lib_rt_memlk+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lrt $LIBS" +cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. - For example, HP-UX 11i declares gettimeofday. */ -#define bind_textdomain_codeset innocuous_bind_textdomain_codeset - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char bind_textdomain_codeset (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef bind_textdomain_codeset /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -22760,18 +17717,11 @@ cat >>conftest.$ac_ext <<_ACEOF #ifdef __cplusplus extern "C" #endif -char bind_textdomain_codeset (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset -choke me -#endif - +char memlk (); int main () { -return bind_textdomain_codeset (); +return memlk (); ; return 0; } @@ -22797,4716 +17747,2951 @@ $as_echo "$ac_try_echo") >&5 test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then - ac_cv_func_bind_textdomain_codeset=yes + ac_cv_lib_rt_memlk=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_func_bind_textdomain_codeset=no + ac_cv_lib_rt_memlk=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 -$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } -if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then - CATOBJEXT=.gmo - DATADIRNAME=share -else - CATOBJEXT=.mo - DATADIRNAME=lib +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rt_memlk" >&5 +$as_echo "$ac_cv_lib_rt_memlk" >&6; } +if test "x$ac_cv_lib_rt_memlk" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBRT 1 +_ACEOF + + LIBS="-lrt $LIBS" + fi - ;; - *) - CATOBJEXT=.mo - DATADIRNAME=lib - ;; - esac + { $as_echo "$as_me:$LINENO: checking whether mlock is in sys/mman.h" >&5 +$as_echo_n "checking whether mlock is in sys/mman.h... " >&6; } +if test "${gnupg_cv_mlock_is_in_sys_mman+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + #include + #ifdef HAVE_SYS_MMAN_H + #include + #endif + +int +main () +{ + + int i; + + /* glibc defines this for functions which it implements + * to always fail with ENOSYS. Some functions are actually + * named something starting with __ and the normal name + * is an alias. */ + #if defined (__stub_mlock) || defined (__stub___mlock) + choke me + #else + mlock(&i, 4); + #endif + ; return 0; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + gnupg_cv_mlock_is_in_sys_mman=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + gnupg_cv_mlock_is_in_sys_mman=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext - LIBS="$glib_save_LIBS" - INSTOBJEXT=.mo - else - gt_cv_have_gettext=no - fi - fi - fi - - - - if test "$gt_cv_have_gettext" = "yes" ; then +{ $as_echo "$as_me:$LINENO: result: $gnupg_cv_mlock_is_in_sys_mman" >&5 +$as_echo "$gnupg_cv_mlock_is_in_sys_mman" >&6; } + if test "$gnupg_cv_mlock_is_in_sys_mman" = "yes"; then cat >>confdefs.h <<\_ACEOF -#define ENABLE_NLS 1 +#define HAVE_MLOCK 1 _ACEOF + fi + fi fi + if test "$ac_cv_func_mlock" = "yes"; then + { $as_echo "$as_me:$LINENO: checking whether mlock is broken" >&5 +$as_echo_n "checking whether mlock is broken... " >&6; } + if test "${gnupg_cv_have_broken_mlock+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then + gnupg_cv_have_broken_mlock="assume-no" - if test "$XGETTEXT" != ":"; then - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - { $as_echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 -$as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } - XGETTEXT=":" - fi - fi - - # We need to process the po/ directory. - POSUB=po +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ - ac_config_commands="$ac_config_commands default-1" + #include + #include + #include + #include + #include + #include + int main() + { + char *pool; + int err; + long int pgsize = getpagesize(); - for lang in $ALL_LINGUAS; do - GMOFILES="$GMOFILES $lang.gmo" - POFILES="$POFILES $lang.po" - done + pool = malloc( 4096 + pgsize ); + if( !pool ) + return 2; + pool += (pgsize - ((long int)pool % pgsize)); + err = mlock( pool, 4096 ); + if( !err || errno == EPERM ) + return 0; /* okay */ + return 1; /* hmmm */ + } +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + gnupg_cv_have_broken_mlock="no" +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +( exit $ac_status ) +gnupg_cv_have_broken_mlock="yes" +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi + if test "$gnupg_cv_have_broken_mlock" = "yes"; then +cat >>confdefs.h <<\_ACEOF +#define HAVE_BROKEN_MLOCK 1 +_ACEOF + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +for ac_func in plock +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func - if test "$gt_cv_have_gettext" = "yes"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - { $as_echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 -$as_echo_n "checking for catalogs to be installed... " >&6; } - NEW_LINGUAS= - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - NEW_LINGUAS="$NEW_LINGUAS $presentlang" - fi - done - LINGUAS=$NEW_LINGUAS - { $as_echo "$as_me:$LINENO: result: $LINGUAS" >&5 -$as_echo "$LINGUAS" >&6; } - fi - - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif - test -d po || mkdir po - if test "x$srcdir" != "x."; then - if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then - posrcprefix="$srcdir/" - else - posrcprefix="../$srcdir/" - fi - else - posrcprefix="../" - fi - rm -f po/POTFILES - sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ - < $srcdir/po/POTFILES.in > po/POTFILES +#undef $ac_func +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif -GTK_REQUIRED="2.4.0" -GLADE_REQUIRED="2.4.0" -DBUS_REQUIRED="0.60" -GCONF_REQUIRED="2.8" -LIBNOTIFY_REQUIRED="0.4" -GIO_UNIX_REQUIRED="0.0" +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_var=no" +fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PKG_CONFIG+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done +fi done -IFS=$as_save_IFS - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 + else + if test "$gnupg_cv_have_broken_mlock" = "no"; then + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } -fi - + else + { $as_echo "$as_me:$LINENO: result: assuming no" >&5 +$as_echo "assuming no" >&6; } + fi + fi + fi -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then + { $as_echo "$as_me:$LINENO: checking for byte typedef" >&5 +$as_echo_n "checking for byte typedef... " >&6; } + if test "${gnupg_cv_typedef_byte+set}" = set; then $as_echo_n "(cached) " >&6 else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _GNU_SOURCE 1 + #include + #include +int +main () +{ - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi + #undef byte + int a = sizeof(byte); - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + gnupg_cv_typedef_byte=yes else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + gnupg_cv_typedef_byte=no fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for GTK" >&5 -$as_echo_n "checking for GTK... " >&6; } + { $as_echo "$as_me:$LINENO: result: $gnupg_cv_typedef_byte" >&5 +$as_echo "$gnupg_cv_typedef_byte" >&6; } + if test "$gnupg_cv_typedef_byte" = yes; then -if test -n "$PKG_CONFIG"; then - if test -n "$GTK_CFLAGS"; then - pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED") 2>&5 +cat >>confdefs.h <<\_ACEOF +#define HAVE_BYTE_TYPEDEF 1 +_ACEOF + + fi + + { $as_echo "$as_me:$LINENO: checking for ulong typedef" >&5 +$as_echo_n "checking for ulong typedef... " >&6; } + if test "${gnupg_cv_typedef_ulong+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _GNU_SOURCE 1 + #include + #include +int +main () +{ + + #undef ulong + int a = sizeof(ulong); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= $GTK_REQUIRED" 2>/dev/null` + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + gnupg_cv_typedef_ulong=yes else - pkg_failed=yes + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + gnupg_cv_typedef_ulong=no fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + + { $as_echo "$as_me:$LINENO: result: $gnupg_cv_typedef_ulong" >&5 +$as_echo "$gnupg_cv_typedef_ulong" >&6; } + if test "$gnupg_cv_typedef_ulong" = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_ULONG_TYPEDEF 1 +_ACEOF + fi + + +# Check whether --with-libcap was given. +if test "${with_libcap+set}" = set; then + withval=$with_libcap; +fi + +if test "x$with_libcap" != "xno"; then + # Extract the first word of "setcap", so it can be a program name with args. +set dummy setcap; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_SETCAP+set}" = set; then + $as_echo_n "(cached) " >&6 else - pkg_failed=untried + case $SETCAP in + [\\/]* | ?:[\\/]*) + ac_cv_path_SETCAP="$SETCAP" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_dummy=""$PATH:/sbin:/usr/sbin"" +for as_dir in $as_dummy +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_SETCAP="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + + test -z "$ac_cv_path_SETCAP" && ac_cv_path_SETCAP=":" + ;; +esac fi -if test -n "$PKG_CONFIG"; then - if test -n "$GTK_LIBS"; then - pkg_cv_GTK_LIBS="$GTK_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED") 2>&5 +SETCAP=$ac_cv_path_SETCAP +if test -n "$SETCAP"; then + { $as_echo "$as_me:$LINENO: result: $SETCAP" >&5 +$as_echo "$SETCAP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + { $as_echo "$as_me:$LINENO: checking for cap_set_proc in -lcap" >&5 +$as_echo_n "checking for cap_set_proc in -lcap... " >&6; } +if test "${ac_cv_lib_cap_cap_set_proc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcap $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char cap_set_proc (); +int +main () +{ +return cap_set_proc (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= $GTK_REQUIRED" 2>/dev/null` + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_cap_cap_set_proc=yes else - pkg_failed=yes + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_cap_cap_set_proc=no fi - fi -else - pkg_failed=untried + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_cap_cap_set_proc" >&5 +$as_echo "$ac_cv_lib_cap_cap_set_proc" >&6; } +if test "x$ac_cv_lib_cap_cap_set_proc" = x""yes; then +cat >>confdefs.h <<\_ACEOF +#define USE_CAPABILITIES 1 +_ACEOF -if test $pkg_failed = yes; then + LIBCAP=-lcap -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no fi - if test $_pkg_short_errors_supported = yes; then - GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED"` - else - GTK_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED"` - fi - # Put the nasty error message in config.log where it belongs - echo "$GTK_PKG_ERRORS" >&5 - { { $as_echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: +fi -$GTK_PKG_ERRORS -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED) were not met: +check_interval=30 -$GTK_PKG_ERRORS +cat >>confdefs.h <<_ACEOF +#define CREDENTIAL_CHECK_INTERVAL $check_interval +_ACEOF -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +minimum_lifetime=30 -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. +cat >>confdefs.h <<_ACEOF +#define MINUTES_BEFORE_PROMPTING $minimum_lifetime +_ACEOF -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -else - GTK_CFLAGS=$pkg_cv_GTK_CFLAGS - GTK_LIBS=$pkg_cv_GTK_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - : -fi -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for GLADE" >&5 -$as_echo_n "checking for GLADE... " >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$GLADE_CFLAGS"; then - pkg_cv_GLADE_CFLAGS="$GLADE_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libglade-2.0 >= \$GLADE_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "libglade-2.0 >= $GLADE_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GLADE_CFLAGS=`$PKG_CONFIG --cflags "libglade-2.0 >= $GLADE_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$GLADE_LIBS"; then - pkg_cv_GLADE_LIBS="$GLADE_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libglade-2.0 >= \$GLADE_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "libglade-2.0 >= $GLADE_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GLADE_LIBS=`$PKG_CONFIG --libs "libglade-2.0 >= $GLADE_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi +ac_config_files="$ac_config_files Makefile krb5-auth-dialog.spec src/Makefile src/krb5-auth-dialog.1 secmem/Makefile gtksecentry/Makefile icons/Makefile etpo/Makefile po/Makefile.in preferences/Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. +_ACEOF -if test $pkg_failed = yes; then +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi fi - if test $_pkg_short_errors_supported = yes; then - GLADE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libglade-2.0 >= $GLADE_REQUIRED"` - else - GLADE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libglade-2.0 >= $GLADE_REQUIRED"` - fi - # Put the nasty error message in config.log where it belongs - echo "$GLADE_PKG_ERRORS" >&5 - - { { $as_echo "$as_me:$LINENO: error: Package requirements (libglade-2.0 >= $GLADE_REQUIRED) were not met: +rm -f confcache -$GLADE_PKG_ERRORS +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. +DEFS=-DHAVE_CONFIG_H -Alternatively, you may set the environment variables GLADE_CFLAGS -and GLADE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (libglade-2.0 >= $GLADE_REQUIRED) were not met: +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs -$GLADE_PKG_ERRORS +LTLIBOBJS=$ac_ltlibobjs -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. -Alternatively, you may set the environment variables GLADE_CFLAGS -and GLADE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GLADE_CFLAGS -and GLADE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. + ac_config_commands="$ac_config_commands po/stamp-it" -Alternatively, you may set the environment variables GLADE_CFLAGS -and GLADE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -else - GLADE_CFLAGS=$pkg_cv_GLADE_CFLAGS - GLADE_LIBS=$pkg_cv_GLADE_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - : +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi - -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for DBUS" >&5 -$as_echo_n "checking for DBUS... " >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$DBUS_CFLAGS"; then - pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-glib-1 >= $DBUS_REQUIRED" 2>/dev/null` -else - pkg_failed=yes +if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi - fi -else - pkg_failed=untried +if test -z "${ENABLE_PKINIT_TRUE}" && test -z "${ENABLE_PKINIT_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_PKINIT\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"ENABLE_PKINIT\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi -if test -n "$PKG_CONFIG"; then - if test -n "$DBUS_LIBS"; then - pkg_cv_DBUS_LIBS="$DBUS_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-glib-1 >= $DBUS_REQUIRED" 2>/dev/null` -else - pkg_failed=yes +if test -z "${ENABLE_NETWORK_MANAGER_TRUE}" && test -z "${ENABLE_NETWORK_MANAGER_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_NETWORK_MANAGER\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"ENABLE_NETWORK_MANAGER\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi - fi -else - pkg_failed=untried +if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "dbus-glib-1 >= $DBUS_REQUIRED"` - else - DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "dbus-glib-1 >= $DBUS_REQUIRED"` - fi - # Put the nasty error message in config.log where it belongs - echo "$DBUS_PKG_ERRORS" >&5 - - { { $as_echo "$as_me:$LINENO: error: Package requirements (dbus-glib-1 >= $DBUS_REQUIRED) were not met: - -$DBUS_PKG_ERRORS +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac -Alternatively, you may set the environment variables DBUS_CFLAGS -and DBUS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (dbus-glib-1 >= $DBUS_REQUIRED) were not met: +fi -$DBUS_PKG_ERRORS -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. -Alternatively, you may set the environment variables DBUS_CFLAGS -and DBUS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. -Alternatively, you may set the environment variables DBUS_CFLAGS -and DBUS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi -Alternatively, you may set the environment variables DBUS_CFLAGS -and DBUS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset else - DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS - DBUS_LIBS=$pkg_cv_DBUS_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - : + as_unset=false fi -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for GCONF" >&5 -$as_echo_n "checking for GCONF... " >&6; } -if test -n "$PKG_CONFIG"; then - if test -n "$GCONF_CFLAGS"; then - pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0 >= \$GCONF_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "gconf-2.0 >= $GCONF_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0 >= $GCONF_REQUIRED" 2>/dev/null` -else - pkg_failed=yes +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 fi - fi -else - pkg_failed=untried +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } fi -if test -n "$PKG_CONFIG"; then - if test -n "$GCONF_LIBS"; then - pkg_cv_GCONF_LIBS="$GCONF_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0 >= \$GCONF_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "gconf-2.0 >= $GCONF_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0 >= $GCONF_REQUIRED" 2>/dev/null` + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - pkg_failed=yes + as_expr=false fi - fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename else - pkg_failed=untried + as_basename=false fi +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` -if test $pkg_failed = yes; then +# CDPATH. +$as_unset CDPATH -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gconf-2.0 >= $GCONF_REQUIRED"` - else - GCONF_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gconf-2.0 >= $GCONF_REQUIRED"` - fi - # Put the nasty error message in config.log where it belongs - echo "$GCONF_PKG_ERRORS" >&5 - { { $as_echo "$as_me:$LINENO: error: Package requirements (gconf-2.0 >= $GCONF_REQUIRED) were not met: -$GCONF_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GCONF_CFLAGS -and GCONF_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (gconf-2.0 >= $GCONF_REQUIRED) were not met: - -$GCONF_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -Alternatively, you may set the environment variables GCONF_CFLAGS -and GCONF_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GCONF_CFLAGS -and GCONF_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} -Alternatively, you may set the environment variables GCONF_CFLAGS -and GCONF_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS - GCONF_LIBS=$pkg_cv_GCONF_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - : + as_dirname=false fi -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for GIO_UNIX" >&5 -$as_echo_n "checking for GIO_UNIX... " >&6; } +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi -if test -n "$PKG_CONFIG"; then - if test -n "$GIO_UNIX_CFLAGS"; then - pkg_cv_GIO_UNIX_CFLAGS="$GIO_UNIX_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-unix-2.0 >= \$GIO_UNIX_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GIO_UNIX_CFLAGS=`$PKG_CONFIG --cflags "gio-unix-2.0 >= $GIO_UNIX_REQUIRED" 2>/dev/null` +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file else - pkg_failed=yes + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null fi - fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi else - pkg_failed=untried + as_ln_s='cp -p' fi -if test -n "$PKG_CONFIG"; then - if test -n "$GIO_UNIX_LIBS"; then - pkg_cv_GIO_UNIX_LIBS="$GIO_UNIX_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gio-unix-2.0 >= \$GIO_UNIX_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GIO_UNIX_LIBS=`$PKG_CONFIG --libs "gio-unix-2.0 >= $GIO_UNIX_REQUIRED" 2>/dev/null` +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: else - pkg_failed=yes + test -d ./-p && rmdir ./-p + as_mkdir_p=false fi - fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' else - pkg_failed=untried + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' fi +as_executable_p=$as_test_x +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -if test $pkg_failed = yes; then -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GIO_UNIX_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED"` - else - GIO_UNIX_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gio-unix-2.0 >= $GIO_UNIX_REQUIRED"` - fi - # Put the nasty error message in config.log where it belongs - echo "$GIO_UNIX_PKG_ERRORS" >&5 +exec 6>&1 - { { $as_echo "$as_me:$LINENO: error: Package requirements (gio-unix-2.0 >= $GIO_UNIX_REQUIRED) were not met: +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by krb5-auth-dialog $as_me 0.10, which was +generated by GNU Autoconf 2.63. Invocation command line was -$GIO_UNIX_PKG_ERRORS + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" -Alternatively, you may set the environment variables GIO_UNIX_CFLAGS -and GIO_UNIX_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -$as_echo "$as_me: error: Package requirements (gio-unix-2.0 >= $GIO_UNIX_REQUIRED) were not met: +_ACEOF -$GIO_UNIX_PKG_ERRORS +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac -Alternatively, you may set the environment variables GIO_UNIX_CFLAGS -and GIO_UNIX_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. -Alternatively, you may set the environment variables GIO_UNIX_CFLAGS -and GIO_UNIX_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" -To get pkg-config, see . -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. +_ACEOF -Alternatively, you may set the environment variables GIO_UNIX_CFLAGS -and GIO_UNIX_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -else - GIO_UNIX_CFLAGS=$pkg_cv_GIO_UNIX_CFLAGS - GIO_UNIX_LIBS=$pkg_cv_GIO_UNIX_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - : +Usage: $0 [OPTION]... [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_version="\\ +krb5-auth-dialog config.status 0.10 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" fi -# Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then - enableval=$enable_debug; -else - enable_debug=no +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" fi -if test x"$enable_debug" = x"yes"; then +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 -cat >>confdefs.h <<\_ACEOF -#define ENABLE_DEBUG 1 _ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" -fi -# Extract the first word of "krb5-config", so it can be a program name with args. -set dummy krb5-config; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_KRB5_CONFIG+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $KRB5_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_KRB5_CONFIG="$KRB5_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_dummy="$PATH:/usr/kerberos/bin" -for as_dir in $as_dummy -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_KRB5_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# Quote evaled strings. +for var in SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +AR \ +AR_FLAGS \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +SHELL \ +ECHO \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_wl \ +lt_prog_compiler_pic \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +fix_srcfile_path \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac done -IFS=$as_save_IFS - test -z "$ac_cv_path_KRB5_CONFIG" && ac_cv_path_KRB5_CONFIG="none" +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ;; esac -fi -KRB5_CONFIG=$ac_cv_path_KRB5_CONFIG -if test -n "$KRB5_CONFIG"; then - { $as_echo "$as_me:$LINENO: result: $KRB5_CONFIG" >&5 -$as_echo "$KRB5_CONFIG" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST fi -if test "x$KRB5_CONFIG" != "xnone"; then - KRB5_LIBS="`${KRB5_CONFIG} --libs krb5`" - KRB5_CFLAGS="`${KRB5_CONFIG} --cflags krb5`" + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' -fi -savedCFLAGS="$CFLAGS" -CFLAGS="$KRB5_CFLAGS $CFLAGS" -savedLIBS="$LIBS" -LIBS="$KRB5_LIBS $LIBS" -for ac_header in hx509_err.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "krb5-auth-dialog.spec") CONFIG_FILES="$CONFIG_FILES krb5-auth-dialog.spec" ;; + "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "src/krb5-auth-dialog.1") CONFIG_FILES="$CONFIG_FILES src/krb5-auth-dialog.1" ;; + "secmem/Makefile") CONFIG_FILES="$CONFIG_FILES secmem/Makefile" ;; + "gtksecentry/Makefile") CONFIG_FILES="$CONFIG_FILES gtksecentry/Makefile" ;; + "icons/Makefile") CONFIG_FILES="$CONFIG_FILES icons/Makefile" ;; + "etpo/Makefile") CONFIG_FILES="$CONFIG_FILES etpo/Makefile" ;; + "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; + "preferences/Makefile") CONFIG_FILES="$CONFIG_FILES preferences/Makefile" ;; + "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi -done - -{ $as_echo "$as_me:$LINENO: checking for krb5_creds.ticket_flags" >&5 -$as_echo_n "checking for krb5_creds.ticket_flags... " >&6; } -if test "${ac_cv_member_krb5_creds_ticket_flags+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || { -static krb5_creds ac_aggr; -if (ac_aggr.ticket_flags) -return 0; - ; - return 0; + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 } -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_ticket_flags=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +# Create a (secure) tmp directory for tmp files. -int -main () { -static krb5_creds ac_aggr; -if (sizeof ac_aggr.ticket_flags) -return 0; - ; - return 0; + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } } -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_ticket_flags=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_member_krb5_creds_ticket_flags=no -fi +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cr=' ' +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_ticket_flags" >&5 -$as_echo "$ac_cv_member_krb5_creds_ticket_flags" >&6; } -if test "x$ac_cv_member_krb5_creds_ticket_flags" = x""yes; then -cat >>confdefs.h <<_ACEOF -#define HAVE_KRB5_CREDS_TICKET_FLAGS 1 +echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF -fi - -{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags.b.forwardable" >&5 -$as_echo_n "checking for krb5_creds.flags.b.forwardable... " >&6; } -if test "${ac_cv_member_krb5_creds_flags_b_forwardable+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () { -static krb5_creds ac_aggr; -if (ac_aggr.flags.b.forwardable) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags_b_forwardable=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\).*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\).*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" -int -main () +} { -static krb5_creds ac_aggr; -if (sizeof ac_aggr.flags.b.forwardable) -return 0; - ; - return 0; + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line } + +_ACAWK _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags_b_forwardable=yes +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_krb5_creds_flags_b_forwardable=no -fi + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +_ACEOF -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags_b_forwardable" >&5 -$as_echo "$ac_cv_member_krb5_creds_flags_b_forwardable" >&6; } -if test "x$ac_cv_member_krb5_creds_flags_b_forwardable" = x""yes; then +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" -cat >>confdefs.h <<_ACEOF -#define HAVE_KRB5_CREDS_FLAGS_B_FORWARDABLE 1 +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { _ACEOF +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. -fi +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done -{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags.b.renewable" >&5 -$as_echo_n "checking for krb5_creds.flags.b.renewable... " >&6; } -if test "${ac_cv_member_krb5_creds_flags_b_renewable+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. -int -main () -{ -static krb5_creds ac_aggr; -if (ac_aggr.flags.b.renewable) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags_b_renewable=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 -int -main () -{ -static krb5_creds ac_aggr; -if (sizeof ac_aggr.flags.b.renewable) -return 0; - ; - return 0; +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } } +{ print } +_ACAWK _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags_b_renewable=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_krb5_creds_flags_b_renewable=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_HEADERS" -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags_b_renewable" >&5 -$as_echo "$ac_cv_member_krb5_creds_flags_b_renewable" >&6; } -if test "x$ac_cv_member_krb5_creds_flags_b_renewable" = x""yes; then -cat >>confdefs.h <<_ACEOF -#define HAVE_KRB5_CREDS_FLAGS_B_RENEWABLE 1 -_ACEOF +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done -fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac -{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags.b.proxiable" >&5 -$as_echo_n "checking for krb5_creds.flags.b.proxiable... " >&6; } -if test "${ac_cv_member_krb5_creds_flags_b_proxiable+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + esac -int -main () -{ -static krb5_creds ac_aggr; -if (ac_aggr.flags.b.proxiable) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags_b_proxiable=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static krb5_creds ac_aggr; -if (sizeof ac_aggr.flags.b.proxiable) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags_b_proxiable=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_krb5_creds_flags_b_proxiable=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags_b_proxiable" >&5 -$as_echo "$ac_cv_member_krb5_creds_flags_b_proxiable" >&6; } -if test "x$ac_cv_member_krb5_creds_flags_b_proxiable" = x""yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_KRB5_CREDS_FLAGS_B_PROXIABLE 1 -_ACEOF - - -fi - -{ $as_echo "$as_me:$LINENO: checking for krb5_creds.flags" >&5 -$as_echo_n "checking for krb5_creds.flags... " >&6; } -if test "${ac_cv_member_krb5_creds_flags+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static krb5_creds ac_aggr; -if (ac_aggr.flags) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static krb5_creds ac_aggr; -if (sizeof ac_aggr.flags) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_krb5_creds_flags=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_krb5_creds_flags=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_krb5_creds_flags" >&5 -$as_echo "$ac_cv_member_krb5_creds_flags" >&6; } -if test "x$ac_cv_member_krb5_creds_flags" = x""yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_KRB5_CREDS_FLAGS 1 -_ACEOF - - -fi - - - - - -for ac_func in krb5_get_error_message krb5_get_renewed_creds \ - krb5_get_init_creds_opt_set_default_flags \ - krb5_cc_clear_mcred -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -for ac_func in krb5_get_init_creds_opt_set_pkinit -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - heimdal_pkinit=yes -else - heimdal_pkinit=no -fi -done - - -for ac_func in krb5_get_init_creds_opt_set_pa -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - mit_pkinit=yes -else - mit_pkinit=no -fi -done - -{ $as_echo "$as_me:$LINENO: checking if a krb5_principal->realm is a char*" >&5 -$as_echo_n "checking if a krb5_principal->realm is a char*... " >&6; } -cat >conftest.$ac_ext <<_ACEOF - -$ac_includes_default -#include -#include -int -main(int argc, char **argv) -{ - static krb5_principal foo; - return strlen(foo->realm); -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_KRB5_PRINCIPAL_REALM_AS_STRING 1 -_ACEOF - -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -{ $as_echo "$as_me:$LINENO: checking if a krb5_principal->realm is a krb5_data" >&5 -$as_echo_n "checking if a krb5_principal->realm is a krb5_data... " >&6; } -cat >conftest.$ac_ext <<_ACEOF - -$ac_includes_default -#include -int -main(int argc, char **argv) -{ - static krb5_principal foo; - static krb5_data bar; - foo->realm = bar; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_KRB5_PRINCIPAL_REALM_AS_DATA 1 -_ACEOF - -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -{ $as_echo "$as_me:$LINENO: checking whether to enable pkinit support" >&5 -$as_echo_n "checking whether to enable pkinit support... " >&6; } -# Check whether --enable-pkinit was given. -if test "${enable_pkinit+set}" = set; then - enableval=$enable_pkinit; -else - enable_pkinit=autodetect -fi - - -if test "x$heimdal_pkinit" = "xyes" -o \ - "x$mit_pkinit" = "xyes"; then - enable_pkinit=yes - -cat >>confdefs.h <<\_ACEOF -#define ENABLE_PKINIT 1 -_ACEOF - -fi -{ $as_echo "$as_me:$LINENO: result: $enable_pkinit" >&5 -$as_echo "$enable_pkinit" >&6; } - if test "x$enable_pkinit" = "xyes"; then - ENABLE_PKINIT_TRUE= - ENABLE_PKINIT_FALSE='#' -else - ENABLE_PKINIT_TRUE='#' - ENABLE_PKINIT_FALSE= -fi - -CFLAGS="$savedCFLAGS" -LIBS="$savedLIBS" - - -{ $as_echo "$as_me:$LINENO: checking whether to enable NetworkManager support" >&5 -$as_echo_n "checking whether to enable NetworkManager support... " >&6; } -# Check whether --enable-network-manager was given. -if test "${enable_network_manager+set}" = set; then - enableval=$enable_network_manager; -else - enable_network_manager=autodetect -fi - -{ $as_echo "$as_me:$LINENO: result: $enable_network_manager" >&5 -$as_echo "$enable_network_manager" >&6; } - -if test "x$enable_network_manager" != "xno"; then - -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for NETWORK_MANAGER" >&5 -$as_echo_n "checking for NETWORK_MANAGER... " >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$NETWORK_MANAGER_CFLAGS"; then - pkg_cv_NETWORK_MANAGER_CFLAGS="$NETWORK_MANAGER_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnm_glib >= 0.5\"") >&5 - ($PKG_CONFIG --exists --print-errors "libnm_glib >= 0.5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_NETWORK_MANAGER_CFLAGS=`$PKG_CONFIG --cflags "libnm_glib >= 0.5" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$NETWORK_MANAGER_LIBS"; then - pkg_cv_NETWORK_MANAGER_LIBS="$NETWORK_MANAGER_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnm_glib >= 0.5\"") >&5 - ($PKG_CONFIG --exists --print-errors "libnm_glib >= 0.5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_NETWORK_MANAGER_LIBS=`$PKG_CONFIG --libs "libnm_glib >= 0.5" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - NETWORK_MANAGER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnm_glib >= 0.5"` - else - NETWORK_MANAGER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnm_glib >= 0.5"` - fi - # Put the nasty error message in config.log where it belongs - echo "$NETWORK_MANAGER_PKG_ERRORS" >&5 - - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - enable_network_manager=no -elif test $pkg_failed = untried; then - enable_network_manager=no -else - NETWORK_MANAGER_CFLAGS=$pkg_cv_NETWORK_MANAGER_CFLAGS - NETWORK_MANAGER_LIBS=$pkg_cv_NETWORK_MANAGER_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - enable_network_manager=yes -fi - - -fi - -if test "x$enable_network_manager" = "xyes"; then - -cat >>confdefs.h <<\_ACEOF -#define ENABLE_NETWORK_MANAGER 1 -_ACEOF - -fi - if test "x$enable_network_manager" = "xyes"; then - ENABLE_NETWORK_MANAGER_TRUE= - ENABLE_NETWORK_MANAGER_FALSE='#' -else - ENABLE_NETWORK_MANAGER_TRUE='#' - ENABLE_NETWORK_MANAGER_FALSE= -fi - - -LIBNOTIFY_CFLAGS= -LIBNOTIFY_LIBS= - -# Check whether --with-libnotify was given. -if test "${with_libnotify+set}" = set; then - withval=$with_libnotify; -else - with_libnotify=check -fi - - -if test "x$with_libnotify" = "xyes" -o "x$with_libnotify" = "xcheck"; then - -pkg_failed=no -{ $as_echo "$as_me:$LINENO: checking for LIBNOTIFY" >&5 -$as_echo_n "checking for LIBNOTIFY... " >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$LIBNOTIFY_CFLAGS"; then - pkg_cv_LIBNOTIFY_CFLAGS="$LIBNOTIFY_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_LIBNOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$LIBNOTIFY_LIBS"; then - pkg_cv_LIBNOTIFY_LIBS="$LIBNOTIFY_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"libnotify >= \$LIBNOTIFY_REQUIRED\"") >&5 - ($PKG_CONFIG --exists --print-errors "libnotify >= $LIBNOTIFY_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_LIBNOTIFY_LIBS=`$PKG_CONFIG --libs "libnotify >= $LIBNOTIFY_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` - else - LIBNOTIFY_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libnotify >= $LIBNOTIFY_REQUIRED"` - fi - # Put the nasty error message in config.log where it belongs - echo "$LIBNOTIFY_PKG_ERRORS" >&5 - - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - - if test "x$with_libnotify" = "xcheck" ; then - with_libnotify=no - else - { { $as_echo "$as_me:$LINENO: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&5 -$as_echo "$as_me: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&2;} - { (exit 1); exit 1; }; } - fi - -elif test $pkg_failed = untried; then - - if test "x$with_libnotify" = "xcheck" ; then - with_libnotify=no - else - { { $as_echo "$as_me:$LINENO: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&5 -$as_echo "$as_me: error: You must install libnotify >= $LIBNOTIFY_REQUIRED to compile krb5-auth-dialog" >&2;} - { (exit 1); exit 1; }; } - fi - -else - LIBNOTIFY_CFLAGS=$pkg_cv_LIBNOTIFY_CFLAGS - LIBNOTIFY_LIBS=$pkg_cv_LIBNOTIFY_LIBS - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - with_libnotify=yes -fi - if test "x$with_libnotify" = "xyes" ; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_LIBNOTIFY 1 -_ACEOF - - fi -fi - if test "x$with_libnotify" = "xyes"; then - HAVE_LIBNOTIFY_TRUE= - HAVE_LIBNOTIFY_FALSE='#' -else - HAVE_LIBNOTIFY_TRUE='#' - HAVE_LIBNOTIFY_FALSE= -fi - - - - - - - - -for ac_func in seteuid stpcpy mmap -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -for ac_func in mlock -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - if test "$ac_cv_func_mlock" = "no"; then - -for ac_header in sys/mman.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - if test "$ac_cv_header_sys_mman_h" = "yes"; then - # Add librt to LIBS: - -{ $as_echo "$as_me:$LINENO: checking for memlk in -lrt" >&5 -$as_echo_n "checking for memlk in -lrt... " >&6; } -if test "${ac_cv_lib_rt_memlk+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lrt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char memlk (); -int -main () -{ -return memlk (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_rt_memlk=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_rt_memlk=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rt_memlk" >&5 -$as_echo "$ac_cv_lib_rt_memlk" >&6; } -if test "x$ac_cv_lib_rt_memlk" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBRT 1 -_ACEOF - - LIBS="-lrt $LIBS" - -fi - - { $as_echo "$as_me:$LINENO: checking whether mlock is in sys/mman.h" >&5 -$as_echo_n "checking whether mlock is in sys/mman.h... " >&6; } -if test "${gnupg_cv_mlock_is_in_sys_mman+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - #include - #ifdef HAVE_SYS_MMAN_H - #include - #endif - -int -main () -{ - - int i; - - /* glibc defines this for functions which it implements - * to always fail with ENOSYS. Some functions are actually - * named something starting with __ and the normal name - * is an alias. */ - #if defined (__stub_mlock) || defined (__stub___mlock) - choke me - #else - mlock(&i, 4); - #endif - ; return 0; - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - gnupg_cv_mlock_is_in_sys_mman=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - gnupg_cv_mlock_is_in_sys_mman=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $gnupg_cv_mlock_is_in_sys_mman" >&5 -$as_echo "$gnupg_cv_mlock_is_in_sys_mman" >&6; } - if test "$gnupg_cv_mlock_is_in_sys_mman" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_MLOCK 1 -_ACEOF - - fi - fi - fi - if test "$ac_cv_func_mlock" = "yes"; then - { $as_echo "$as_me:$LINENO: checking whether mlock is broken" >&5 -$as_echo_n "checking whether mlock is broken... " >&6; } - if test "${gnupg_cv_have_broken_mlock+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then - gnupg_cv_have_broken_mlock="assume-no" - -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - #include - #include - #include - #include - #include - #include - - int main() - { - char *pool; - int err; - long int pgsize = getpagesize(); - - pool = malloc( 4096 + pgsize ); - if( !pool ) - return 2; - pool += (pgsize - ((long int)pool % pgsize)); - - err = mlock( pool, 4096 ); - if( !err || errno == EPERM ) - return 0; /* okay */ - - return 1; /* hmmm */ - } - - -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - gnupg_cv_have_broken_mlock="no" -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -gnupg_cv_have_broken_mlock="yes" -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - - -fi - - if test "$gnupg_cv_have_broken_mlock" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_BROKEN_MLOCK 1 -_ACEOF - - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - -for ac_func in plock -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - else - if test "$gnupg_cv_have_broken_mlock" = "no"; then - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - else - { $as_echo "$as_me:$LINENO: result: assuming no" >&5 -$as_echo "assuming no" >&6; } - fi - fi - fi - - { $as_echo "$as_me:$LINENO: checking for byte typedef" >&5 -$as_echo_n "checking for byte typedef... " >&6; } - if test "${gnupg_cv_typedef_byte+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _GNU_SOURCE 1 - #include - #include -int -main () -{ - - #undef byte - int a = sizeof(byte); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - gnupg_cv_typedef_byte=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - gnupg_cv_typedef_byte=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - { $as_echo "$as_me:$LINENO: result: $gnupg_cv_typedef_byte" >&5 -$as_echo "$gnupg_cv_typedef_byte" >&6; } - if test "$gnupg_cv_typedef_byte" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_BYTE_TYPEDEF 1 -_ACEOF - - fi - - { $as_echo "$as_me:$LINENO: checking for ulong typedef" >&5 -$as_echo_n "checking for ulong typedef... " >&6; } - if test "${gnupg_cv_typedef_ulong+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _GNU_SOURCE 1 - #include - #include -int -main () -{ - - #undef ulong - int a = sizeof(ulong); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - gnupg_cv_typedef_ulong=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - gnupg_cv_typedef_ulong=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - { $as_echo "$as_me:$LINENO: result: $gnupg_cv_typedef_ulong" >&5 -$as_echo "$gnupg_cv_typedef_ulong" >&6; } - if test "$gnupg_cv_typedef_ulong" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_ULONG_TYPEDEF 1 -_ACEOF - - fi - - -# Check whether --with-libcap was given. -if test "${with_libcap+set}" = set; then - withval=$with_libcap; -fi - -if test "x$with_libcap" != "xno"; then - # Extract the first word of "setcap", so it can be a program name with args. -set dummy setcap; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_SETCAP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - case $SETCAP in - [\\/]* | ?:[\\/]*) - ac_cv_path_SETCAP="$SETCAP" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_dummy=""$PATH:/sbin:/usr/sbin"" -for as_dir in $as_dummy -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_SETCAP="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_path_SETCAP" && ac_cv_path_SETCAP=":" - ;; -esac -fi -SETCAP=$ac_cv_path_SETCAP -if test -n "$SETCAP"; then - { $as_echo "$as_me:$LINENO: result: $SETCAP" >&5 -$as_echo "$SETCAP" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - { $as_echo "$as_me:$LINENO: checking for cap_set_proc in -lcap" >&5 -$as_echo_n "checking for cap_set_proc in -lcap... " >&6; } -if test "${ac_cv_lib_cap_cap_set_proc+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lcap $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char cap_set_proc (); -int -main () -{ -return cap_set_proc (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_cap_cap_set_proc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_cap_cap_set_proc=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_cap_cap_set_proc" >&5 -$as_echo "$ac_cv_lib_cap_cap_set_proc" >&6; } -if test "x$ac_cv_lib_cap_cap_set_proc" = x""yes; then - - -cat >>confdefs.h <<\_ACEOF -#define USE_CAPABILITIES 1 -_ACEOF - - LIBCAP=-lcap - -fi - -fi - - - -check_interval=30 - -cat >>confdefs.h <<_ACEOF -#define CREDENTIAL_CHECK_INTERVAL $check_interval -_ACEOF - - - -minimum_lifetime=30 - -cat >>confdefs.h <<_ACEOF -#define MINUTES_BEFORE_PROMPTING $minimum_lifetime -_ACEOF - - - -CFLAGS="\ - $GTK_CFLAGS \ - $GLADE_CFLAGS \ - $DBUS_CFLAGS \ - $GCONF_CFLAGS \ - $KRB5_CFLAGS \ - $NETWORK_MANAGER_CFLAGS \ - $LIBNOTIFY_CFLAGS \ - $WARN_CFLAGS \ - $CFLAGS" - -ac_config_files="$ac_config_files Makefile krb5-auth-dialog.spec src/Makefile src/krb5-auth-dialog.1 secmem/Makefile gtksecentry/Makefile icons/Makefile etpo/Makefile po/Makefile.in preferences/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - - ac_config_commands="$ac_config_commands po/stamp-it" - - -if test -z "${ENABLE_PKINIT_TRUE}" && test -z "${ENABLE_PKINIT_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_PKINIT\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"ENABLE_PKINIT\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${ENABLE_NETWORK_MANAGER_TRUE}" && test -z "${ENABLE_NETWORK_MANAGER_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_NETWORK_MANAGER\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"ENABLE_NETWORK_MANAGER\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${HAVE_LIBNOTIFY_TRUE}" && test -z "${HAVE_LIBNOTIFY_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_LIBNOTIFY\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"HAVE_LIBNOTIFY\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - -: ${CONFIG_STATUS=./config.status} -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix -fi +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + case $ac_mode in + :F) + # + # CONFIG_FILE + # + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= -as_nl=' +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p ' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files +# are listed without --file. Let's play safe and only enable the eval +# if we detect the quoting. +case $CONFIG_FILES in +*\'*) eval set x "$CONFIG_FILES" ;; +*) set x $CONFIG_FILES ;; +esac +shift +for mf +do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } - /^X\/\(\/\/\)$/{ + /^X\(\/\/\)[^/].*/{ s//\1/ q } - /^X\/\(\/\).*/{ + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) + sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile + esac ;; + "libtool":C) -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi +# The names of the tagged configurations supported by this script. +available_tags="" -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +# ### BEGIN LIBTOOL CONFIG -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared +# Whether or not to build static libraries. +build_old_libs=$enable_static -exec 6>&1 +# What type of objects to build. +pic_mode=$pic_mode -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by krb5-auth-dialog $as_me 0.9.1, which was -generated by GNU Autoconf 2.63. Invocation command line was +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os -_ACEOF +# A sed program that does not truncate output. +SED=$lt_SED -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac +# A grep program that handles long lines. +GREP=$lt_GREP +# An ERE matcher. +EGREP=$lt_EGREP -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" +# A literal string matcher. +FGREP=$lt_FGREP -_ACEOF +# A BSD- or MS-compatible name lister. +NM=$lt_NM -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +# Whether we need soft or hard links. +LN_S=$lt_LN_S -Usage: $0 [OPTION]... [FILE]... +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE +# Object file suffix (normally "o"). +objext=$ac_objext -Configuration files: -$config_files +# Executable file suffix (normally ""). +exeext=$exeext -Configuration headers: -$config_headers +# whether the shell understands "unset". +lt_unset=$lt_unset -Configuration commands: -$config_commands +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL -Report bugs to ." +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_version="\\ -krb5-auth-dialog config.status 0.9.1 -configured by $0, generated by GNU Autoconf 2.63, - with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds -Copyright (C) 2008 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - { $as_echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - # This is an error. - -*) { $as_echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - esac - shift -done +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix -ac_configure_extra_args= +# The name of the directory that contains temporary libtool files. +objdir=$objdir -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +# Must we lock files when doing compilation? +need_locks=$lt_need_locks +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL -_ACEOF +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "krb5-auth-dialog.spec") CONFIG_FILES="$CONFIG_FILES krb5-auth-dialog.spec" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "src/krb5-auth-dialog.1") CONFIG_FILES="$CONFIG_FILES src/krb5-auth-dialog.1" ;; - "secmem/Makefile") CONFIG_FILES="$CONFIG_FILES secmem/Makefile" ;; - "gtksecentry/Makefile") CONFIG_FILES="$CONFIG_FILES gtksecentry/Makefile" ;; - "icons/Makefile") CONFIG_FILES="$CONFIG_FILES icons/Makefile" ;; - "etpo/Makefile") CONFIG_FILES="$CONFIG_FILES etpo/Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "preferences/Makefile") CONFIG_FILES="$CONFIG_FILES preferences/Makefile" ;; - "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL - *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 +# Old archive suffix (normally "a"). +libext=$libext -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - $as_echo "$as_me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix +# Do we need a version for libraries? +need_version=$need_version -ac_cr=' ' -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi +# Library versioning type. +version_type=$version_type -echo 'BEGIN {' >"$tmp/subs1.awk" && -_ACEOF +# Shared library runtime path variable. +runpath_var=$runpath_var +# Shared library path variable. +shlibpath_var=$shlibpath_var -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\).*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\).*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } +# The linker used to build libraries. +LD=$lt_LD - print line -} +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 -$as_echo "$as_me: error: could not setup config files machinery" >&2;} - { (exit 1); exit 1; }; } -_ACEOF +# A language specific compiler. +CC=$lt_compiler -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi +# Is the compiler the GNU compiler? +with_gcc=$GCC -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then - break - elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 -$as_echo "$as_me: error: could not setup config headers machinery" >&2;} - { (exit 1); exit 1; }; } -fi # test -n "$CONFIG_HEADERS" +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 -$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - ac_file_inputs="$ac_file_inputs '$ac_f'" - done +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } ;; - esac +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF ;; esac - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix +ltmain="$ac_aux_dir/ltmain.sh" -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - case $ac_mode in - :F) - # - # CONFIG_FILE - # + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; esac -_ACEOF + func_basename_result="${1##*/}" +} -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} -ac_sed_dataroot=' -/datarootdir/ { - p - q +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} } -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; - esac \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - fi +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 -$as_echo "$as_me: error: could not create -" >&2;} - { (exit 1); exit 1; }; } + func_dirname_result="$func_dirname_result${2}" fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; +} - :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac +} +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files -# are listed without --file. Let's play safe and only enable the eval -# if we detect the quoting. -case $CONFIG_FILES in -*\'*) eval set x "$CONFIG_FILES" ;; -*) set x $CONFIG_FILES ;; +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF esac -shift -for mf -do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + ;; - "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) - sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile - esac ;; "po/stamp-it":C) if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then { { $as_echo "$as_me:$LINENO: error: po/Makefile.in.in was not created by intltoolize." >&5 @@ -27587,14 +20772,12 @@ $as_echo "$as_me: " >&6;} $as_echo "$as_me: kerberos: $KRB5_CFLAGS $KRB5_LIBS" >&6;} { $as_echo "$as_me:$LINENO: gtk: $GTK_CFLAGS $GTK_LIBS" >&5 $as_echo "$as_me: gtk: $GTK_CFLAGS $GTK_LIBS" >&6;} -{ $as_echo "$as_me:$LINENO: glade: $GLADE_CFLAGS $GLADE_LIBS" >&5 -$as_echo "$as_me: glade: $GLADE_CFLAGS $GLADE_LIBS" >&6;} { $as_echo "$as_me:$LINENO: dbus: $DBUS_CFLAGS $DBUS_LIBS" >&5 $as_echo "$as_me: dbus: $DBUS_CFLAGS $DBUS_LIBS" >&6;} { $as_echo "$as_me:$LINENO: gconf: $GCONF_CFLAGS $GCONF_LIBS" >&5 $as_echo "$as_me: gconf: $GCONF_CFLAGS $GCONF_LIBS" >&6;} -{ $as_echo "$as_me:$LINENO: gio-unix: $GIO_UNIX_CFLAGS $GIO_UNIX_LIBS" >&5 -$as_echo "$as_me: gio-unix: $GIO_UNIX_CFLAGS $GIO_UNIX_LIBS" >&6;} +{ $as_echo "$as_me:$LINENO: gio-unix: $GIO_UNIX_CFLAGS $GIO_UNIX_LIBS $GIO_CFLAGS $GIO_LIBS" >&5 +$as_echo "$as_me: gio-unix: $GIO_UNIX_CFLAGS $GIO_UNIX_LIBS $GIO_CFLAGS $GIO_LIBS" >&6;} if test "$with_libnotify" = "yes" ; then { $as_echo "$as_me:$LINENO: libnotify: $LIBNOTIFY_CFLAGS $LIBNOTIFY_LIBS" >&5 $as_echo "$as_me: libnotify: $LIBNOTIFY_CFLAGS $LIBNOTIFY_LIBS" >&6;} -- cgit