From b37d1fa1f1deda881eef751358917c29f38871b8 Mon Sep 17 00:00:00 2001 From: B Stack Date: Thu, 27 Oct 2016 09:57:35 -0400 Subject: Added to git --- etc/keepalive/README.txt | 30 +++++ etc/keepalive/bin/keepalive | 251 ++++++++++++++++++++++++++++++++++ etc/keepalive/bin/keepalive.sh | 261 ++++++++++++++++++++++++++++++++++++ etc/keepalive/docs/debian/conffiles | 1 + etc/keepalive/docs/debian/control | 13 ++ etc/keepalive/docs/debian/md5sums | 14 ++ etc/keepalive/docs/debian/postinst | 5 + etc/keepalive/docs/debian/postrm | 4 + etc/keepalive/docs/debian/preinst | 17 +++ etc/keepalive/docs/debian/prerm | 18 +++ etc/keepalive/docs/keepalive.spec | 82 +++++++++++ etc/keepalive/inc/localize_git.sh | 2 + etc/keepalive/inc/scrub.py | 124 +++++++++++++++++ etc/keepalive/inc/scrub.txt | 14 ++ etc/keepalive/keepalive.conf | 11 ++ etc/keepalive/packaging.txt | 53 ++++++++ etc/logrotate.d/keepalive | 11 ++ etc/rsyslog.d/keepalivelog.conf | 7 + 18 files changed, 918 insertions(+) create mode 100644 etc/keepalive/README.txt create mode 100755 etc/keepalive/bin/keepalive create mode 100644 etc/keepalive/bin/keepalive.sh create mode 100644 etc/keepalive/docs/debian/conffiles create mode 100644 etc/keepalive/docs/debian/control create mode 100644 etc/keepalive/docs/debian/md5sums create mode 100755 etc/keepalive/docs/debian/postinst create mode 100755 etc/keepalive/docs/debian/postrm create mode 100755 etc/keepalive/docs/debian/preinst create mode 100755 etc/keepalive/docs/debian/prerm create mode 100644 etc/keepalive/docs/keepalive.spec create mode 100755 etc/keepalive/inc/localize_git.sh create mode 100755 etc/keepalive/inc/scrub.py create mode 100644 etc/keepalive/inc/scrub.txt create mode 100644 etc/keepalive/keepalive.conf create mode 100644 etc/keepalive/packaging.txt create mode 100644 etc/logrotate.d/keepalive create mode 100644 etc/rsyslog.d/keepalivelog.conf (limited to 'etc') diff --git a/etc/keepalive/README.txt b/etc/keepalive/README.txt new file mode 100644 index 0000000..84479c7 --- /dev/null +++ b/etc/keepalive/README.txt @@ -0,0 +1,30 @@ +File: etc/keepalive/README.txt +Package: keepalive 1.0-6 +Author: bgstack15@gmail.com +Startdate: 2016-06-07 +Title: Readme file for keepalive +Purpose: All packages should come with a readme +History: +Usage: Read it. +Reference: README.txt +Improve: +Document: Below this line + +### WELCOME +To use the keepalive program, start the service. +systemctl start keepalive.service + +### CHANGELOG +keepalive 1.0-4 2016-06-07 +Changed packaging so bgscripts is a prerequisite, not a corequisite package so framework.sh exists before keepalive service is started for the first time. +https://docs.fedoraproject.org/en-US/Fedora_Draft_Documentation/0.1/html/RPM_Guide/ch-advanced-packaging.html +https://www.debian.org/doc/debian-policy/ch-relationships.html + +keepalive 1.0-5 2016-07-22 +Rewrote the application in python3 + +2016-10-27 keepalive 1.0-6 +Added scrub.py subpackage +Modified to be suitable for sharing on github + +### REFERENCE diff --git a/etc/keepalive/bin/keepalive b/etc/keepalive/bin/keepalive new file mode 100755 index 0000000..b603135 --- /dev/null +++ b/etc/keepalive/bin/keepalive @@ -0,0 +1,251 @@ +#!/usr/bin/python3 -u +# File: /etc/keepalive/bin/keepalive +# Author: bgstack15@gmail.com +# Startdate: 2016-07-20 +# Title: Keepalive Script in Python +# Purpose: To perform keepalive functionality in python. This is mostly a learning exercise in python. +# History: 2016-07-21 Basic, hard-coded functionality working +# Usage: +# Reference: +# keepalive-1.0-4 /etc/keepalive/bin/keepalive (shell script) +# http://stackoverflow.com/questions/5574702/how-to-print-to-stderr-in-python#14981125 +# signals: /usr/include/x86_64-linux-gnu/bits/signum.h +# https://docs.python.org/3/library/atexit.html +# http://www.tutorialspoint.com/python/python_command_line_arguments.htm +# https://docs.python.org/2/library/argparse.html#module-argparse +# http://stackoverflow.com/questions/15848674/how-to-configparse-a-file-keeping-multiple-values-for-identical-keys +# python3 -u from http://stackoverflow.com/questions/13069634/python-daemon-and-systemd-service#30189540 +# Improve: +# x Add config parsing +# x Add argument parsing +# Do internal web calls instead of using curl (optional) +# Add debug info + +#from __future__ import print_function +import sys, os, socket, subprocess, re, time, platform +#import requests, requests_kerberos +import signal, atexit +import argparse, configparser +from collections import OrderedDict + +keepaliveversion="2016-07-22b" + +class MultiOrderedDict(OrderedDict): + def __setitem__(self, key, value): + if isinstance(value, list) and key in self: + self[key].extend(value) + else: + super(OrderedDict, self).__setitem__(key, value) + #Reference: http://stackoverflow.com/questions/15848674/how-to-configparse-a-file-keeping-multiple-values-for-identical-keys + +def usage(): + # now with argparse, this usage command is never used. It will be removed in a future version. + usage_string=""" +usage: keepalive [-duV] [-k ] [-r ] [-i ] +version """+keepaliveversion+""" + -d debug Show debugging info, including parsed variables. + -u usage Show this usage block. + -V version Show script version number. + -k keytab Overrides default keytab value. Default is """+keytab+""" + -i infile Overrides default infile value. Default is """+infile1+""" + -r refresh Overrides default wait time between checks. Default is """+str(refresh)+""" +usage: keepalive out + Will log out of the proxy and exit +Return values: +0 Normal +1 Help or version info displayed +2 Could not start: could be already running, bad lockfile, bad keytab +3 Incorrect OS type +4 Unable to find dependency +5 Not run as root or sudo +""" + print(usage_string,file=sys.stderr) + +# DEFINE FUNCTIONS + +def klog(*s, **kwargs): + print(*s, file=sys.stderr, **kwargs) + # Ref: http://stackoverflow.com/questions/5574702/how-to-print-to-stderr-in-python#14981125 + +def proxylogout(*logoutproxies): + try: + for word in logoutproxies: + subprocess.call(["/usr/bin/curl","-s","-o","/dev/null",word],stdout=subprocess.DEVNULL,stderr=subprocess.DEVNULL) + except BaseException as e: + # no proxies, so use default + subprocess.call(["/usr/bin/curl","-s","-o","/dev/null","http://proxylogout.example.com"],stdout=subprocess.DEVNULL,stderr=subprocess.DEVNULL) + +# DEFINE TRAPS + +def clean_keepalive(*reason): + thisreason="" + try: + thisreason=reason[0] + except BaseException as e: + thisreason="manual" + + if thisreason == "normal": + klog("exiting at end of procedural run. This should not happen in production.") + elif thisreason == "clean": + # be silent because only doing the systemd unit ExecStopPost cleanup + pass + else: + klog("stopped by user") + + try: + os.remove(lockfile) + except BaseException as e: + pass + +def CTRLC(signum=signal.SIGQUIT, frame=""): + print("This is CTRLC function") + sys.exit(1) + +def CTRLZ(signum=signal.SIGQUIT, frame=""): + print("This is CTRLZ") + sys.exit(2) + +# INITIALIZE VARIABLES +servercaps=socket.gethostname().upper().split('.',1)[0] +thisflavor=platform.dist()[0].lower() +thisversion=platform.dist()[1] +infile1="/etc/keepalive/keepalive.conf" + +# DEFAULT VARIABLES that can be adjusted by keepalive.conf +lockfile="/tmp/.keepalive.py.lock" +keytab="/etc/krb5.keytab" +refresh=4 +proxies=[] +proxies.append("https://proxy1.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8=") +proxies.append("https://proxy2.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8=") +logoutproxies=[] +logoutproxies.append("http://proxylogout.example.com") + +# PARSE ARGUMENTS +# Reference: https://docs.python.org/2/library/argparse.html#module-argparse +parser = argparse.ArgumentParser(description="keep this host logged into the proxy") +parser.add_argument("-d","--debug",help="enables debugging",action="store_true") +parser.add_argument("-V","--version",help="",action="store_true") +parser.add_argument("-k","--keytab",help="Overrides default keytab value",default="") +parser.add_argument("-i","--infile","--inputfile",help="use a specific conf file",default="") +parser.add_argument("-r","--refresh",type=int,help="Overrides default wait time",default=0) +parser.add_argument("--out",action="store_true") +parser.add_argument("--clean",action="store_true",help="") +args = parser.parse_args() +debug=0 +logoutonly=False +cleanonly=False +if args.debug: debug=1 +if args.version: + print("keepalive version",keepaliveversion) + sys.exit(0) +if len(args.keytab) > 0: keytab=args.keytab +if args.refresh > 0: refresh=args.refresh +if len(args.infile) > 0: infile1=args.infile +if args.out: logoutonly=True +if args.clean: cleanonly=True + +# REACT TO OPERATING SYSTEM FLAVOR +# this is different from the older shell keepalive, which relied on SYSTEM TYPE +if thisflavor == "ubuntu" or thisflavor == "debian": + pass +elif thisflavor == "centos" or thisflavor == "redhat": + pass +else: + print("keepalive: 3. Unknown flavor:",thisflavor + ".","Aborted.",file=sys.stderr) + sys.exit(3) + +# REACT TO ROOT STATUS +if os.geteuid() != 0: + print("keepalive: 5. Please run as root or sudo. Aborted.",file=sys.stderr) + sys.exit(5) + +# IF LOGOUT ONLY +if logoutonly: + proxylogout(logoutproxies) + sys.exit(0) + +# IF CLEAN ONLY +if cleanonly: + clean_keepalive("clean") + sys.exit(0) + +# READ CONFIG FILE stub +if not os.path.isfile(infile1): + klog("4. Cannot find conf",infile1 + ".","Using defaults.") +else: + # read config file here + config=configparser.RawConfigParser(dict_type=MultiOrderedDict,strict=False) + #config['keepalive']={'lockfile': '/tmp/.keepalive.py.lock', + # 'keytab': '/etc/krb5.keytab', + # 'refresh': '240', + # 'proxy': 'https://proxy1.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8=', + # 'proxy': 'https://proxy2.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8='} + config.read(infile1) + # use the options from the config file + if len(config['keepalive']['lockfile'][0]) > 0: lockfile=config['keepalive']['lockfile'][0] + if len(config['keepalive']['keytab']) > 0: keytab=config['keepalive']['keytab'][0] + if len(config['keepalive']['refresh']) > 0: refresh=int(config['keepalive']['refresh'][0]) + if len(config['keepalive']['proxy']) > 0: + proxies.clear() + else: + #no proxies configured! I guess we will leave the defaults in place then + pass + for word in config['keepalive']['proxy']: proxies.append(word) + if len(config['keepalive']['logoutproxy']) > 0: + logoutproxies.clear() + else: + # no logoutproxies configured! Leave the defaults in place + pass + for word in config['keepalive']['logoutproxy']: logoutproxies.append(word) + +# CREATE LOCKFILE ONLY IF IT DOES NOT EXIST +if os.path.isfile(lockfile) == False: + lockf=open(lockfile,'w') + lockf.write(str(os.getpid())) + lockf.close() +else: + klog("2. Could not create lockfile",lockfile + ".","Aborted.") + sys.exit(2) + +# EXIT IF KEYTABFILE IS INVALID +if not os.path.isfile(lockfile): + klog("2. Could not find keytab",keytab + ".","Aborted.") + sys.exit(2) + +atexit.register(clean_keepalive) + +# works but not needed +#signal.signal(signal.SIGINT, CTRLC) +#signal.signal(signal.SIGCONT, CTRLZ) +# Consider this research. Consider using 19 "SIGSTOP" which occurs at start of the interrupt-and-stop-job I think + +# MAIN LOOP +a=False +while a==False: + proxylogout(logoutproxies) + + # Ensure kerberos ticket exists + try: + b=str(subprocess.check_output("klist",stderr=subprocess.DEVNULL)) + except BaseException as e: + b="" + + p = re.compile('.*principal: '+servercaps) + if p.match(b): + klog("valid ticket found") + else: + subprocess.call("kdestroy") + klog("requesting new ticket") + subprocess.call(["kinit","-kt",keytab,servercaps+"$"]) + + # So with valid kerberos ticket, perform actions against all proxies + for proxy in proxies: + subprocess.call(["/usr/bin/curl","-s","-o","/dev/null","--negotiate","-u:ignoreMe","-b","~/ProxyCookies.txt","-c","~/ProxyCookies.txt",proxy]) + #print(proxy) + + time.sleep(refresh) +# END MAIN LOOP + +atexit.unregister(clean_keepalive) +clean_keepalive("normal") diff --git a/etc/keepalive/bin/keepalive.sh b/etc/keepalive/bin/keepalive.sh new file mode 100644 index 0000000..d0a7714 --- /dev/null +++ b/etc/keepalive/bin/keepalive.sh @@ -0,0 +1,261 @@ +#!/bin/bash +# Filename: keepalive +# Location: LINUX one:/mnt/scripts/keepalive/bin +# Author: bgstack15@gmail.com +# Startdate: 2015-11-10 09:15:57 +# Title: Keepalive Script +# Purpose: +# History: 2015-11-10 +# 2015-11-12 uses local directory for default infile +# 2016-06-02 Updated for bgscripts 1.1-6, so keepalive 1.0-3 +# 2016-07-22 This keepalive.sh is the keepalive-1.0-4 version before the project switched to python. This is included for historical reference only. +# Usage: +# Reference: ftemplate.sh 2015-11-06a; framework.sh 2015-07-10a +# Proxy Keepalive for Linux Bash (Alice User1 2014-07-31) +# Improve: +fiversion="2015-11-30a" +keepaliveversion="2016-06-02a" + +usage() { + less -F >&2 <] [-r ] [-i ] +version ${keepaliveversion} + -d debug Show debugging info, including parsed variables. + -u usage Show this usage block. + -V version Show script version number. + -k keytab Overrides default keytab value. Default is ${keytab} + -i infile Overrides default infile value. Default is ${infile1} + -r refresh Overrides default wait time between checks. Default is ${refresh} +usage: keepalive out + Will log out of the proxy and exit +Return values: +0 Normal +1 Help or version info displayed +2 Could not start: could be already running, bad lockfile, bad keytab +3 Incorrect OS type +4 Unable to find dependency +5 Not run as root or sudo +ENDUSAGE +} + +# DEFINE FUNCTIONS +function klog { + # abstracted out so I can either do a file or do syslog in the future easily + ferror "$@" + #echo "" | flecho "$@" 1>&2 + #date "+[%Y-%m-%d %T] keepalive: $@" >&2 + #logger "keepalive: $@" +} + +function proxylogout { + # Logout the previously authenticated user + /usr/bin/curl -s -o /dev/null http://proxylogout.example.com >/dev/null 2>&1 +} + +# DEFINE TRAPS + +function clean_keepalive { + klog "stopping" + rm -f ${lockfile} >/dev/null 2>&1 + [ ] #use at end of entire script if you need to clean up tmpfiles +} + +function CTRLC { + #trap "CTRLC" 2 + [ ] #useful for controlling the ctrl+c keystroke +} + +function CTRLZ { + #trap "CTRLZ" 18 + [ ] #useful for controlling the ctrl+z keystroke +} + +function parseFlag { + flag=$1 + hasval=0 + case $flag in + # INSERT FLAGS HERE + "d" | "debug" | "DEBUG") debug=1;; + "u" | "usage" | "help") usage; exit 1;; + "V" | "fcheck" | "version") ferror "${scriptfile} version ${keepaliveversion}"; exit 1;; + "k" | "keytab" | "kfile" | "ktfile") getval; keytab=${tempval};; + "r" | "refresh" | "refreshtime") getval; refresh=${tempval};; + "i" | "infile" | "inputfile") getval; infile1=${tempval};; + esac + + [[ debug -eq 1 ]] && { [[ hasval -eq 1 ]] && ferror "flag: $flag = $tempval" || ferror "flag: $flag"; } +} + +# DETERMINE LOCATION OF FRAMEWORK +while read flocation; do if [[ -x $flocation ]] && [[ $( $flocation --fcheck ) -ge 20160525 ]]; then frameworkscript=$flocation; break; fi; done <&2 && exit 4 + +# REACT TO OPERATING SYSTEM TYPE +case $( uname -s ) in + AIX) echo "$scriptfile: 3. Linux-only script." 1>&2 && exit 3;; + Linux) [ ];; + *) echo "$scriptfile: 3. Indeterminate OS: $( uname -s )" 1>&2 && exit 3;; +esac + +# INITIALIZE VARIABLES +# variables set in framework: +# today server thistty scriptdir scriptfile scripttrim +# is_cronjob stdin_piped stdout_piped stderr_piped sendsh sendopts +. ${frameworkscript} || echo "$0: framework did not run properly. Continuing..." 1>&2 +infile1=/etc/keepalive/keepalive.conf # can be adjusted on the cli +outfile1= +logfile=${scriptdir}/${scripttrim}.${today}.out +interestedparties="bgstack15@example.com" +servercaps=$( echo "${server}" | tr 'a-z' 'A-Z' ) + +# DEFAULT VARIABLES THAT CAN BE ADJUSTED BY keepalive.conf +lockfile="/tmp/.keepalive.lock" +keytab=/etc/krb5.keytab +refresh=4 +proxy1=https://proxy1.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8= +proxy2=https://proxy2.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8= + +# REACT TO ROOT STATUS +case $is_root in + 1) # proper root + [ ] ;; + sudo) # sudo to root + [ ] ;; + "") # not root at all + ferror "${scriptfile}: 5. Please run as root or sudo. Aborted." + exit 5 + ;; +esac + +# SET CUSTOM SCRIPT AND VALUES +#setval 1 sendsh sendopts</dev/null | grep -qiE "principal.*${servercaps}" ); + then + # valid + klog "valid ticket found" + else + # invalid + # make a new kerberos ticket + kdestroy + klog "requesting new ticket" + kinit -kt "${keytab}" "${servercaps}\$" + fi + + # So with a valid kerberos ticket, perform actions against both proxies + # I was unable to get the WHICHPROXY functionality working + /usr/bin/curl -s -o /dev/null --negotiate -u:ignoreMe -b ~/ProxyCookies.txt -c ~/ProxyCookies.txt $proxy1 2>&1 + /usr/bin/curl -s -o /dev/null --negotiate -u:ignoreMe -b ~/ProxyCookies.txt -c ~/ProxyCookies.txt $proxy2 2>&1 + + sleep $refresh +done + +# EMAIL LOGFILE +#$sendsh $sendopts "$server $scriptfile out" $logfile $interestedparties + +# FINAL CLEANUP +trap '' 0 # reset trap to undefined +clean_keepalive end # so I can call it manually diff --git a/etc/keepalive/docs/debian/conffiles b/etc/keepalive/docs/debian/conffiles new file mode 100644 index 0000000..8dafbff --- /dev/null +++ b/etc/keepalive/docs/debian/conffiles @@ -0,0 +1 @@ +/etc/keepalive/keepalive.conf diff --git a/etc/keepalive/docs/debian/control b/etc/keepalive/docs/debian/control new file mode 100644 index 0000000..8d42833 --- /dev/null +++ b/etc/keepalive/docs/debian/control @@ -0,0 +1,13 @@ +Package: keepalive +Version: 1.0-6 +Architecture: all +Essential: no +Priority: extra +Section: utils +Maintainer: B G Stack +Installed-Size: 350 +Homepage: https://bgstack15.wordpress.com/ +Source: keepalive.tgz +Pre-Depends: bgscripts (>= 1.1-17), sssd, python3 +Description: Keepalive uses a system kerberos ticket (generating one if necessary) to stay authenticated to the http proxy. + The user defines http_proxy and https_proxy. Keepalive assumes the system joined to an AD domain. diff --git a/etc/keepalive/docs/debian/md5sums b/etc/keepalive/docs/debian/md5sums new file mode 100644 index 0000000..3307807 --- /dev/null +++ b/etc/keepalive/docs/debian/md5sums @@ -0,0 +1,14 @@ +317bad02db12ba2340b5c4ef30c9376b usr/lib/systemd/system/keepalive.service +5aa43c0360a508ad909cfe2ac4495179 etc/keepalive/packaging.txt +76803e4e6e9f74fc8de2ae4ddfc7c470 etc/keepalive/bin/keepalive +4e750e3f9ce8e00feaa34d614405f066 etc/keepalive/keepalive.conf +5c34e36e9838a29d59f3ed9fa0b4c8e7 etc/keepalive/docs/debian/postinst +061b27636d5dd3ab9ca7fa00b5a6e0a6 etc/keepalive/docs/debian/control +391dcefa7356b76dfdc7eebae9e450ba etc/keepalive/docs/debian/postrm +eb54ab3395cf1a7f9ffd558b5142679d etc/keepalive/docs/debian/prerm +2a7ad29f5f70879eca2d71a01152ac19 etc/keepalive/docs/debian/preinst +7b84e6ef73c48a2474789f8daf76a8d7 etc/keepalive/docs/debian/conffiles +7c2ef5667400f3fa3166bbfe41a835e2 etc/keepalive/docs/keepalive.spec +ec2f0bc9c707cb03aa933d203e1506ef etc/keepalive/README.txt +cf972826834f5cce6d48266bc9f18110 etc/logrotate.d/keepalive +3b4332e514014ed750012692a75dc572 etc/rsyslog.d/keepalivelog.conf diff --git a/etc/keepalive/docs/debian/postinst b/etc/keepalive/docs/debian/postinst new file mode 100755 index 0000000..4c3092b --- /dev/null +++ b/etc/keepalive/docs/debian/postinst @@ -0,0 +1,5 @@ +#!/bin/sh + +systemctl daemon-reload 1>/dev/null 2>&1 +systemctl enable keepalive 1>/dev/null 2>&1 +systemctl start keepalive 1>/dev/null 2>&1 diff --git a/etc/keepalive/docs/debian/postrm b/etc/keepalive/docs/debian/postrm new file mode 100755 index 0000000..2c475d8 --- /dev/null +++ b/etc/keepalive/docs/debian/postrm @@ -0,0 +1,4 @@ +#!/bin/sh + +# whether removing an updated package or just removing it entirely, this is a good idea: +systemctl daemon-reload 1>/dev/null 2>&1 diff --git a/etc/keepalive/docs/debian/preinst b/etc/keepalive/docs/debian/preinst new file mode 100755 index 0000000..75ff571 --- /dev/null +++ b/etc/keepalive/docs/debian/preinst @@ -0,0 +1,17 @@ +#!/bin/sh +#https://www.debian.org/doc/debian-policy/ch-maintainerscripts.html +thisservice=keepalive.service + +case "${1}" in + upgrade) + # This preinst is being run before an upgrade. + # $2 is old-version-number + systemctl stop keepalive.service 1>/dev/null 2>&1 + ;; + install) + # Brand new installation of the package. + [ ] + ;; +esac + +exit 0 diff --git a/etc/keepalive/docs/debian/prerm b/etc/keepalive/docs/debian/prerm new file mode 100755 index 0000000..99a4f6a --- /dev/null +++ b/etc/keepalive/docs/debian/prerm @@ -0,0 +1,18 @@ +#!/bin/sh + +thisservice=keepalive.service + +case "${1}" in + upgrade) + # This prerm upgrade is running because a newer version of this package is being installed. + # $2 is new-version-number + [ ] + ;; + remove) + # No new package being installed. Just remove it. + systemctl stop "${thisservice}" 1>/dev/null 2>&1 + systemctl disable "${thisservice}" 1>/dev/null 2>&1 + ;; +esac + +exit 0 diff --git a/etc/keepalive/docs/keepalive.spec b/etc/keepalive/docs/keepalive.spec new file mode 100644 index 0000000..0df5e3a --- /dev/null +++ b/etc/keepalive/docs/keepalive.spec @@ -0,0 +1,82 @@ +# +# spec file for keepalive compiled by hand +Summary: Keepalive +Name: keepalive +Version: 1.0 +Release: 6 +License: CC BY-SA 4.0 +Group: Applications/System +Source: keepalive.tgz +URL: bgstack15@gmail.com +#Distribution: +#Vendor: +Packager: Bgstack15 +Buildarch: noarch +PreReq: bgscripts >= 1.1-17 +PreReq: python34 + +%description +Keepalive uses a system kerbors ticket (generating one if necessary) to stay authenticated to the http proxy. +The user defines http_proxy and https_proxy. Keepalive assumes the system joined to an AD domain. + +%prep +%setup + +%build + +%install +rsync -a . %{buildroot}/ + +%clean +rm -rf ${buildroot} + +%pre +if [ $1 = "1" ]; +then + # first version being installed + find /tmp/foo >/dev/null 2>&1 +else + # not the first version being installed + systemctl stop keepalive >/dev/null 2>&1 +fi +exit 0 + +%post +systemctl enable keepalive +systemctl start keepalive + +%preun +if [[ "$1" = "0" ]]; +then + # last version of package is being erased + systemctl disable keepalive >/dev/null 2>&1 + systemctl stop keepalive >/dev/null 2>&1 +else + # not last version being erased + find /tmp/foo >/dev/null 2>&1 +fi +exit 0 + +%files +/etc/logrotate.d/keepalive +%config /etc/rsyslog.d/keepalivelog.conf +%doc %attr(444, -, -) /etc/keepalive/README.txt +%verify(link) /etc/keepalive/bin/keepalive.sh +%verify(link) /etc/keepalive/bin/keepalive +/etc/keepalive/docs/keepalive.spec +/etc/keepalive/docs/debian/postinst +/etc/keepalive/docs/debian/conffiles +/etc/keepalive/docs/debian/md5sums +/etc/keepalive/docs/debian/prerm +/etc/keepalive/docs/debian/postrm +/etc/keepalive/docs/debian/control +/etc/keepalive/docs/debian/preinst +%config /etc/keepalive/keepalive.conf +/etc/keepalive/inc/scrub.py +/etc/keepalive/inc/scrub.pyc +/etc/keepalive/inc/scrub.pyo +/etc/keepalive/inc/localize_git.sh +%doc %attr(444, -, -) /etc/keepalive/inc/scrub.txt +%doc %attr(444, -, -) /etc/keepalive/packaging.txt +/usr/lib/systemd/system/keepalive.service +%verify(link) /usr/bin/keepalive diff --git a/etc/keepalive/inc/localize_git.sh b/etc/keepalive/inc/localize_git.sh new file mode 100755 index 0000000..ade84d4 --- /dev/null +++ b/etc/keepalive/inc/localize_git.sh @@ -0,0 +1,2 @@ +#!/bin/sh +\cp -pRf /home/work/keepalive.clean/.git /home/bgstack15/rpmbuild/SOURCES/keepalive-1.0-6/ diff --git a/etc/keepalive/inc/scrub.py b/etc/keepalive/inc/scrub.py new file mode 100755 index 0000000..afa81a1 --- /dev/null +++ b/etc/keepalive/inc/scrub.py @@ -0,0 +1,124 @@ +#!/bin/env python3 +# Filename: scrub.py +# Location: Various +# Author: bgstack15@gmail.com +# Startdate: 2016-09-28 +# Title: Script that Simultaneously Copies and Scrubs a Directory +# Purpose: Prepare projects for publication by removing private information like usernames and hostnames +# Package: Various +# History: +# 2016-10-03 working on batch rename files +# 2016-10-20 added not ".tgz" in source.name +# 2016-10-27 Fixed error when trying chmod on a symlink +# Usage: +# Store this file with any package that gets published. Adjust scrub.txt in local directory. +# # First line: source directory Second line: target directory. WILL BE OVERWRITTEN! +# /etc/ansible +# /home/bjones/ansible.clean +# # Rest of the lines are "OLD WORD" "NEW WORD" +# bjones bgstack15 +# rsmith rmstack15 +# Reference: +# http://stackoverflow.com/questions/79968/split-a-string-by-spaces-preserving-quoted-substrings-in-python/524796#524796 +# http://stackoverflow.com/questions/6706953/python-using-subprocess-to-call-sed#6707003 +# http://stackoverflow.com/questions/6584871/remove-last-character-if-its-a-backslash/6584893#6584893 +# http://stackoverflow.com/questions/2212643/python-recursive-folder-read/2212728#2212728 +# parallel lists: http://stackoverflow.com/questions/1663807/how-can-i-iterate-through-two-lists-in-parallel-in-python +# file renames http://stackoverflow.com/questions/225735/batch-renaming-of-files-in-a-directory/7917798#7917798 +# Improve: +# Add option to specify scrub file +# Add exclude option to scrub file, such as .git and so on +# Accept CLI options like source, destination, even exclusions? +# Add flag for performing file renames as well, or file renames only +import re, shlex, os, sys, shutil +from pathlib import Path + +# scrubpy version +scrubpyversion = "2016-10-27a" + +# Define functions + +def removeComments(string): + #string = re.sub(re.compile("/\*.*?\*/",re.DOTALL ) ,"", string) + #string = re.sub(re.compile("//.*?\n" ) ,"" ,string) + pattern = r"(\".*?\"|\'.*?\')|(/\*.*?\*/|(//|#)[^\r\n]*$)" + regex = re.compile(pattern, re.MULTILINE|re.DOTALL) + def _replacer(match): + if match.group(2) is not None: + return "" + else: + return match.group(1) + return regex.sub(_replacer, string) + +# Main code +stringfile = open('scrub.txt','r') +count=0 +thisdir="" +newdir="" +oldstrings=[] +newstrings=[] + +while True: + x = stringfile.readline().rstrip() + count += 1 + if not x: break + x = removeComments(x) + #print("x=" + x) + y = shlex.split (x) + if len(y) >= 1: + if thisdir == "": + thisdir = y[0] + elif newdir == "": + newdir = y[0] + if len(y) >= 2: + #print("y[0]=" + y[0] + "\t and y[1]=" + y[1]) + oldstrings.append(y[0]) + newstrings.append(y[1]) + +# After the file is done +stringfile.close() +#newdir = thisdir.rstrip('\/') + ".scrubbed/" + +if False: + print("\nthisdir=" + thisdir) + print("newdir=" + newdir + '\n') + print("oldstrings are:") + print(oldstrings) + print("newstrings are:") + print(newstrings) + +# Clean scrubbed directory +try: + shutil.rmtree(newdir) +except: + foo=1 + +shutil.copytree(thisdir,newdir,symlinks=True) + +# Execute substitutions +for rootfolder, subdirs, files in os.walk(thisdir): + for filename in files: + sourcepath = os.path.join(rootfolder, filename) + with open( sourcepath, "r" ) as source: + if not ".swp" in source.name and not ".git" in source.name and not ".tgz" in source.name: + destdir = rootfolder.replace(thisdir.rstrip('\/'),newdir.rstrip('\/')) + destfile = os.path.join(destdir, filename) + #print("sourcefile=" + source.name) + #print("destfile=" + destfile + '\n') + if not os.path.islink( destfile ): + with open( destfile, "w") as target: + data = source.read() + for oldword, newword in zip(oldstrings, newstrings): + data = data.replace(oldword,newword) + changed = data + target.write(changed) + +# Execute file renames +# Used "file renames" reference, as well as the structure of directory traversal used earlier, which was from a different source. +for rootfolder, subdirs, files in os.walk(newdir): + for filename in files: + oldpath = os.path.join(rootfolder, filename) + for oldword, newword in zip(oldstrings, newstrings): + if oldword in oldpath: + #print("oldword=" + oldword + "\toldpath=" + oldpath) + os.rename(oldpath, oldpath.replace(oldword,newword)) diff --git a/etc/keepalive/inc/scrub.txt b/etc/keepalive/inc/scrub.txt new file mode 100644 index 0000000..a27aff1 --- /dev/null +++ b/etc/keepalive/inc/scrub.txt @@ -0,0 +1,14 @@ +# First line: source directory Second line: target directory. WILL BE OVERWRITTEN! +/home/bgstack15/rpmbuild/SOURCES/keepalive-1.0-6 +/home/work/keepalive.clean +# rest of the lines are "OLD WORD" "NEW WORD" +BGSTACK15 BGSTACK15 +Bgstack15 Bgstack15 +bgstack15 bgstack15 +example example +EXAMPLE EXAMPLE +".com" ".com" +"203.0." "203.0." +one one +Alice Alice +User1 User1 diff --git a/etc/keepalive/keepalive.conf b/etc/keepalive/keepalive.conf new file mode 100644 index 0000000..9debff9 --- /dev/null +++ b/etc/keepalive/keepalive.conf @@ -0,0 +1,11 @@ +# File: keepalive.conf +# bgstack15@gmail.com 2016-07-22 +# updated for keepalive-1.0-5 +[keepalive] +lockfile = /tmp/.keepalive.py.lock +keytab = /etc/krb5.keytab +refresh = 240 +# refresh is an integer in seconds +proxy = https://proxy1.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8= +proxy = https://proxy2.example.com:4433/?cfru=aHR0cHM6Ly93d3cuZ29vZ2xlLmNvbS8= +logoutproxy = http://proxylogout.example.com diff --git a/etc/keepalive/packaging.txt b/etc/keepalive/packaging.txt new file mode 100644 index 0000000..77f3b10 --- /dev/null +++ b/etc/keepalive/packaging.txt @@ -0,0 +1,53 @@ +File: etc/keepalive/packaging.txt +Package: keepalive +Author: bgstack15 +Startdate: 2016-06-02 +Title: Packaging instructions for keepalive +Purpose: To make it easier to build the package +History: 2016-10-27 updated for git project +Usage: +Reference: bgscripts package packaging.txt +Improve: +Document: Below this line + +### PACKAGING for rhel/centos +package=keepalive +version=1.0-6 +shortversion=1.0 +rpmbuilddir=~/rpmbuild/ +packagespecfile="${package}-${version}/etc/${package}/docs/${package}.spec" +sed -i -n '1,/^\%files$/p;' ${rpmbuilddir}/SOURCES/"${packagespecfile}" +cd ${rpmbuilddir}/SOURCES/"${package}-${version}" +find * ! -type d ! -regex '.*?.swp' ! -regex '.*?DEBIAN.*?' | sed -e 's/^/\//;' -e 's/\(.*\.txt\)/%doc %attr(444, -, -) \1/;' -e 's/\(.*\.conf\)/%config \1/;' -e 's/\(.*bin.*\)/%verify(link) \1/;' -e 's/\(.*\)\.py$/\1\.py\n\1\.pyc\n\1\.pyo/;' >> ${rpmbuilddir}/SOURCES/"${packagespecfile}" +rm -rf ${rpmbuilddir}/SOURCES/"${package}-${shortversion}" +cp -prf ${rpmbuilddir}/SOURCES/"${package}-${version}" ${rpmbuilddir}/SOURCES/"${package}-${shortversion}" +rm -rf ${rpmbuilddir}/SOURCES/"${package}-${shortversion}"/DEBIAN +cd ${rpmbuilddir}/SOURCES +rm -rf "${package}".tgz; tar -zc --exclude='.git' -f "${package}.tgz" "${package}-${shortversion}" && rm -rf ${rpmbuilddir}/SOURCES/"${package}-${shortversion}" +cp -p ${rpmbuilddir}/SOURCES/"${packagespecfile}" ${rpmbuilddir}/SPECS +cd ${rpmbuilddir}/RPMS/noarch +rpmbuild -bb "${rpmbuilddir}"/SPECS/"${package}".spec + +### PACKAGING for debian +# You need package dpkg-dev to build packages. +package=keepalive +version=1.0-6 +packagedebfilesdir="${package}-${version}/etc/keepalive/docs/debian" +cd ~/deb/"${package}-${version}" +find . -type f ! -regex '.*.hg.*' ! -regex '.*?debian-binary.*' ! -regex '.*?DEBIAN.*' ! -regex '.*?.swp' ! -regex '.*\.git.*' -printf '%P ' | xargs md5sum > DEBIAN/md5sums +rm -rf ~/deb/"${package}-${version}"/DEBIAN/ 2>/dev/null; mkdir -p ~/deb/"${package}-${version}"/DEBIAN/ +cp -pf ~/deb/"${packagedebfilesdir}"/* ~/deb/"${package}-${version}"/DEBIAN/ +cd ~/deb +rm -rf ~/deb/"${package}-${version}.a" +cp -pR ~/deb/"${package}-${version}" ~/deb/"${package}-${version}.a" +rm -rf ~/deb/"${package}-${version}"/.git +dpkg-deb -b ~/deb/"${package}-${version}" +rm -rf ~/deb/"${package}-${version}" +mv ~/deb/"${package}-${version}.a" ~/deb/"${package}-${version}" + +### PACKAGING in a master.tgz +cd ~/deb 2>/dev/null || cd ~/rpmbuild/SOURCES +package=keepalive +version=1.0-6 +rm -rf ./"${package}-${version}".master.tgz +tar -zcf "${package}-${version}".master.tgz "${package}-${version}"/ diff --git a/etc/logrotate.d/keepalive b/etc/logrotate.d/keepalive new file mode 100644 index 0000000..37d7cfb --- /dev/null +++ b/etc/logrotate.d/keepalive @@ -0,0 +1,11 @@ +# File: /etc/logrotate.d/keepalive +# bgstack15@gmail.com 2015-11-11 +/var/log/keepalive.log { + weekly + missingok + notifempty + rotate 2 + compress + maxage 7 + create 0644 root root +} diff --git a/etc/rsyslog.d/keepalivelog.conf b/etc/rsyslog.d/keepalivelog.conf new file mode 100644 index 0000000..36f6dc2 --- /dev/null +++ b/etc/rsyslog.d/keepalivelog.conf @@ -0,0 +1,7 @@ +# File: /etc/rsyslog.d/keepalivelog.conf +# bgstack15@gmail.com 2015-11-10 +# Reference: https://ask.puppetlabs.com/question/432/puppet-and-rsyslog/ +if $programname == "keepalive" then -/var/log/keepalive.log +& stop +if $programname == "keepalive.sh" then -/var/log/keepalive.log +& stop -- cgit